! Started logfile: J0143-3200_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:17:17 2016 obs J0143-3200_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0143-3200_S_2014_12_20_pus_uva.fits ! AN table 1: 105 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966561 visibilities/baseline/integration-bin. ! Found source: J0143-3200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 18268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0143-3200_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915581Jy sigma=0.007667 ! Fit after self-cal, rms=0.891786Jy sigma=0.007488 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=6.807 mas, bpa=-4.979 degrees ! Estimated noise=1002.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0861889 Jy ! Component: 100 - total flux cleaned = 0.105043 Jy ! Total flux subtracted in 100 components = 0.105043 Jy ! Clean residual min=-0.004485 max=0.008261 Jy/beam ! Clean residual mean=-0.000021 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.105043 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.105043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104957Jy sigma=0.000799 ! Fit after self-cal, rms=0.104945Jy sigma=0.000799 ! Inverting map ! Added new window around map position (-3, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771208 Jy ! Component: 100 - total flux cleaned = 0.0120987 Jy ! Total flux subtracted in 100 components = 0.0120987 Jy ! Clean residual min=-0.004406 max=0.006279 Jy/beam ! Clean residual mean=-0.000007 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.117142 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.117142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104170Jy sigma=0.000793 ! Fit after self-cal, rms=0.104160Jy sigma=0.000792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=8.093 mas, bpa=-4.278 degrees ! Estimated noise=635.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598456 Jy ! Component: 100 - total flux cleaned = 0.0095346 Jy ! Component: 150 - total flux cleaned = 0.0117741 Jy ! Component: 200 - total flux cleaned = 0.012478 Jy ! Total flux subtracted in 200 components = 0.012478 Jy ! Clean residual min=-0.003308 max=0.003021 Jy/beam ! Clean residual mean=-0.000011 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.12962 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 66 components and 0.12962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103711Jy sigma=0.000790 ! Fit after self-cal, rms=0.103728Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.87 HN 1.06 KP 1.11 ! LA 1.02 MK 1.02 NL 0.96 OV 0.97 ! PT 1.10 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.14 KP 1.08 ! LA 0.97 MK 1.02 NL 0.95 OV 0.99 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.15 HN 1.09 KP 0.94 ! LA 0.80 MK 1.03 NL 1.07 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.01 KP 0.91 ! LA 0.82 MK 0.99 NL 1.04 OV 0.95 ! PT 1.05 SC 0.98 ! ! ! Fit before self-cal, rms=0.103728Jy sigma=0.000790 ! Fit after self-cal, rms=0.102226Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=8.093 mas, bpa=-4.02 degrees ! Estimated noise=633.727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108247 Jy ! Component: 100 - total flux cleaned = -0.00131279 Jy ! Component: 150 - total flux cleaned = -0.00143014 Jy ! Component: 200 - total flux cleaned = -0.00160127 Jy ! Total flux subtracted in 200 components = -0.00160127 Jy ! Clean residual min=-0.002161 max=0.002223 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.128018 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.128018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102183Jy sigma=0.000783 ! Fit after self-cal, rms=0.102151Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102151Jy sigma=0.000783 ! Fit after self-cal, rms=0.103342Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=8.094 mas, bpa=-4.018 degrees ! Estimated noise=634.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000539562 Jy ! Component: 100 - total flux cleaned = -0.000748267 Jy ! Component: 150 - total flux cleaned = -0.000877379 Jy ! Component: 200 - total flux cleaned = -0.000990923 Jy ! Total flux subtracted in 200 components = -0.000990923 Jy ! Clean residual min=-0.001880 max=0.001893 Jy/beam ! Clean residual mean=-0.000002 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.127027 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.127027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103327Jy sigma=0.000781 ! Fit after self-cal, rms=0.103348Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222561 Jy ! Component: 100 - total flux cleaned = -0.000243306 Jy ! Component: 150 - total flux cleaned = -0.000299782 Jy ! Component: 200 - total flux cleaned = -0.000350062 Jy ! Total flux subtracted in 200 components = -0.000350062 Jy ! Clean residual min=-0.001899 max=0.001880 Jy/beam ! Clean residual mean=-0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.126677 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.126677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103341Jy sigma=0.000781 ! Fit after self-cal, rms=0.103338Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103338Jy sigma=0.000781 ! Fit after self-cal, rms=0.105420Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.09 mas, bpa=-4.1 degrees ! Estimated noise=634.982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000556072 Jy ! Component: 100 - total flux cleaned = -0.000555435 Jy ! Component: 150 - total flux cleaned = -0.000595864 Jy ! Component: 200 - total flux cleaned = -0.000648487 Jy ! Total flux subtracted in 200 components = -0.000648487 Jy ! Clean residual min=-0.001645 max=0.001921 Jy/beam ! Clean residual mean=-0.000007 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.126029 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.126029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105409Jy sigma=0.000780 ! Fit after self-cal, rms=0.105439Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.58727e-05 Jy ! Component: 100 - total flux cleaned = -5.67316e-05 Jy ! Component: 150 - total flux cleaned = -5.72035e-05 Jy ! Component: 200 - total flux cleaned = -5.72826e-05 Jy ! Total flux subtracted in 200 components = -5.72826e-05 Jy ! Clean residual min=-0.001618 max=0.001919 Jy/beam ! Clean residual mean=-0.000007 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.125972 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 132 components and 0.125972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105435Jy sigma=0.000780 ! Fit after self-cal, rms=0.105433Jy sigma=0.000780 ! Inverting map ! Added new window around map position (64.5, 54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00099944 Jy ! Component: 100 - total flux cleaned = 0.000909262 Jy ! Component: 150 - total flux cleaned = 0.000873454 Jy ! Component: 200 - total flux cleaned = 0.000812374 Jy ! Total flux subtracted in 200 components = 0.000812374 Jy ! Clean residual min=-0.001583 max=0.001807 Jy/beam ! Clean residual mean=-0.000008 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.126784 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 148 components and 0.126784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105383Jy sigma=0.000780 ! Fit after self-cal, rms=0.105384Jy sigma=0.000780 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105384Jy sigma=0.000780 ! Fit after self-cal, rms=0.105826Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.887 mas, bmaj=21.74 mas, bpa=1.618 degrees ! Estimated noise=786.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202773 Jy ! Component: 100 - total flux cleaned = -0.000366401 Jy ! Component: 150 - total flux cleaned = -0.000495738 Jy ! Component: 200 - total flux cleaned = -0.000580458 Jy ! Total flux subtracted in 200 components = -0.000580458 Jy ! Clean residual min=-0.001458 max=0.001752 Jy/beam ! Clean residual mean=-0.000015 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.126204 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 163 components and 0.126204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105817Jy sigma=0.000780 ! Fit after self-cal, rms=0.105825Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.46593e-05 Jy ! Component: 100 - total flux cleaned = -0.000130381 Jy ! Component: 150 - total flux cleaned = -0.000187604 Jy ! Component: 200 - total flux cleaned = -0.000227968 Jy ! Total flux subtracted in 200 components = -0.000227968 Jy ! Clean residual min=-0.001475 max=0.001747 Jy/beam ! Clean residual mean=-0.000014 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.125976 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 166 components and 0.125976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105822Jy sigma=0.000780 ! Fit after self-cal, rms=0.105822Jy sigma=0.000780 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.091 mas, bpa=-4.123 degrees ! Estimated noise=634.428 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 8.091 at -4.123 degrees (North through East) ! Clean map min=-0.0019194 max=0.10814 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=6.755 mas, bpa=-4.813 degrees ! Estimated noise=1008.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0864799 Jy ! Component: 100 - total flux cleaned = 0.105537 Jy ! Component: 150 - total flux cleaned = 0.112145 Jy ! Component: 200 - total flux cleaned = 0.116405 Jy ! Total flux subtracted in 200 components = 0.116405 Jy ! Clean residual min=-0.002844 max=0.002986 Jy/beam ! Clean residual mean=-0.000016 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.116405 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.116405 Jy ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.091 mas, bpa=-4.123 degrees ! Estimated noise=634.428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045954 Jy ! Component: 100 - total flux cleaned = 0.00719491 Jy ! Component: 150 - total flux cleaned = 0.00849202 Jy ! Component: 200 - total flux cleaned = 0.00910656 Jy ! Total flux subtracted in 200 components = 0.00910656 Jy ! Clean residual min=-0.001679 max=0.001648 Jy/beam ! Clean residual mean=-0.000009 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.125511 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 81 components and 0.125511 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.887 mas, bmaj=21.74 mas, bpa=1.618 degrees ! Estimated noise=786.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011254 Jy ! Component: 100 - total flux cleaned = 0.00124431 Jy ! Component: 150 - total flux cleaned = 0.00137081 Jy ! Component: 200 - total flux cleaned = 0.0013716 Jy ! Total flux subtracted in 200 components = 0.0013716 Jy ! Clean residual min=-0.001418 max=0.001708 Jy/beam ! Clean residual mean=-0.000014 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.126883 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.75181e-05 Jy ! Component: 100 - total flux cleaned = -9.10739e-05 Jy ! Component: 150 - total flux cleaned = -0.000131152 Jy ! Component: 200 - total flux cleaned = -0.000168345 Jy ! Total flux subtracted in 200 components = -0.000168345 Jy ! Clean residual min=-0.001425 max=0.001701 Jy/beam ! Clean residual mean=-0.000013 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.126715 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 114 components and 0.126715 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.091 mas, bpa=-4.123 degrees ! Estimated noise=634.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.71273e-05 Jy ! Component: 100 - total flux cleaned = 6.87616e-05 Jy ! Component: 150 - total flux cleaned = 0.000159761 Jy ! Component: 200 - total flux cleaned = 0.000241934 Jy ! Total flux subtracted in 200 components = 0.000241934 Jy ! Clean residual min=-0.001517 max=0.001664 Jy/beam ! Clean residual mean=-0.000006 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.126957 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 0.126957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105829Jy sigma=0.000780 ! Fit after self-cal, rms=0.105819Jy sigma=0.000780 wmodel J0143-3200_S_2014_12_20_pus_map.mod ! Writing 131 model components to file: J0143-3200_S_2014_12_20_pus_map.mod wobs J0143-3200_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0143-3200_S_2014_12_20_pus_uvs.fits wwins J0143-3200_S_2014_12_20_pus_map.win ! wwins: Wrote 4 windows to J0143-3200_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374196 Jy ! Component: 100 - total flux cleaned = 0.000514047 Jy ! Component: 150 - total flux cleaned = 0.000486996 Jy ! Component: 200 - total flux cleaned = 0.000359207 Jy ! Component: 250 - total flux cleaned = 0.000209476 Jy ! Component: 300 - total flux cleaned = 0.000112188 Jy ! Component: 350 - total flux cleaned = 1.71941e-05 Jy ! Component: 400 - total flux cleaned = -5.96536e-06 Jy ! Component: 450 - total flux cleaned = -0.000121044 Jy ! Component: 500 - total flux cleaned = -0.000211236 Jy ! Component: 550 - total flux cleaned = -0.000277861 Jy ! Component: 600 - total flux cleaned = -0.000343762 Jy ! Component: 650 - total flux cleaned = -0.000430132 Jy ! Component: 700 - total flux cleaned = -0.000515722 Jy ! Component: 750 - total flux cleaned = -0.000641831 Jy ! Component: 800 - total flux cleaned = -0.000703666 Jy ! Component: 850 - total flux cleaned = -0.000723865 Jy ! Component: 900 - total flux cleaned = -0.000865825 Jy ! Component: 950 - total flux cleaned = -0.00100595 Jy ! Component: 1000 - total flux cleaned = -0.00104535 Jy ! Component: 1050 - total flux cleaned = -0.0011235 Jy ! Component: 1100 - total flux cleaned = -0.00123918 Jy ! Component: 1150 - total flux cleaned = -0.00129668 Jy ! Component: 1200 - total flux cleaned = -0.00133451 Jy ! Component: 1250 - total flux cleaned = -0.00150283 Jy ! Component: 1300 - total flux cleaned = -0.00157677 Jy ! Component: 1350 - total flux cleaned = -0.00161336 Jy ! Component: 1400 - total flux cleaned = -0.00175833 Jy ! Component: 1450 - total flux cleaned = -0.00181237 Jy ! Component: 1500 - total flux cleaned = -0.00193668 Jy ! Component: 1550 - total flux cleaned = -0.00198942 Jy ! Component: 1600 - total flux cleaned = -0.00209451 Jy ! Component: 1650 - total flux cleaned = -0.0022157 Jy ! Component: 1700 - total flux cleaned = -0.00236946 Jy ! Component: 1750 - total flux cleaned = -0.00235227 Jy ! Component: 1800 - total flux cleaned = -0.00243638 Jy ! Component: 1850 - total flux cleaned = -0.00246978 Jy ! Component: 1900 - total flux cleaned = -0.00246992 Jy ! Component: 1950 - total flux cleaned = -0.00253557 Jy ! Component: 2000 - total flux cleaned = -0.00256795 Jy ! Component: 2050 - total flux cleaned = -0.00266434 Jy ! Component: 2100 - total flux cleaned = -0.00271227 Jy ! Component: 2150 - total flux cleaned = -0.00274393 Jy ! Component: 2200 - total flux cleaned = -0.00274406 Jy ! Component: 2250 - total flux cleaned = -0.00286893 Jy ! Component: 2300 - total flux cleaned = -0.00285328 Jy ! Component: 2350 - total flux cleaned = -0.00289946 Jy ! Component: 2400 - total flux cleaned = -0.00296035 Jy ! Component: 2450 - total flux cleaned = -0.0029605 Jy ! Component: 2500 - total flux cleaned = -0.00303521 Jy ! Component: 2550 - total flux cleaned = -0.00303531 Jy ! Component: 2600 - total flux cleaned = -0.00310883 Jy ! Component: 2650 - total flux cleaned = -0.00313787 Jy ! Component: 2700 - total flux cleaned = -0.00313799 Jy ! Component: 2750 - total flux cleaned = -0.00322421 Jy ! Component: 2800 - total flux cleaned = -0.00318123 Jy ! Component: 2850 - total flux cleaned = -0.00325224 Jy ! Component: 2900 - total flux cleaned = -0.00325215 Jy ! Component: 2950 - total flux cleaned = -0.00328012 Jy ! Component: 3000 - total flux cleaned = -0.00330774 Jy ! Component: 3050 - total flux cleaned = -0.0033216 Jy ! Component: 3100 - total flux cleaned = -0.00333529 Jy ! Component: 3150 - total flux cleaned = -0.00332164 Jy ! Component: 3200 - total flux cleaned = -0.00330795 Jy ! Component: 3250 - total flux cleaned = -0.00340202 Jy ! Component: 3300 - total flux cleaned = -0.00336201 Jy ! Component: 3350 - total flux cleaned = -0.00338865 Jy ! Component: 3400 - total flux cleaned = -0.00344126 Jy ! Component: 3450 - total flux cleaned = -0.00342815 Jy ! Component: 3500 - total flux cleaned = -0.00350607 Jy ! Component: 3550 - total flux cleaned = -0.00351897 Jy ! Component: 3600 - total flux cleaned = -0.00357019 Jy ! Component: 3650 - total flux cleaned = -0.0035829 Jy ! Component: 3700 - total flux cleaned = -0.00357028 Jy ! Component: 3750 - total flux cleaned = -0.0035828 Jy ! Component: 3800 - total flux cleaned = -0.00362053 Jy ! Component: 3850 - total flux cleaned = -0.00367017 Jy ! Component: 3900 - total flux cleaned = -0.00365789 Jy ! Component: 3950 - total flux cleaned = -0.00367019 Jy ! Component: 4000 - total flux cleaned = -0.00367025 Jy ! Component: 4050 - total flux cleaned = -0.00373094 Jy ! Total flux subtracted in 4096 components = -0.00377925 Jy ! Clean residual min=-0.000921 max=0.000809 Jy/beam ! Clean residual mean=-0.000003 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.123177 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 437 components and 0.123177 Jy ![Exited script file: muppet] wmap "J0143-3200_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 8.091 at -4.123 degrees (North through East) ! Clean map min=-0.0016649 max=0.1085 Jy/beam ! Writing clean map to FITS file: J0143-3200_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108498 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221139 device "J0143-3200_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0143-3200_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.611455 0.611455 1.22291 2.44582 4.89164 9.78328 19.5666 39.1331 78.2663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 8.091 at -4.123 degrees (North through East) ! Clean map min=-0.0016649 max=0.1085 Jy/beam quit ! Quitting program ! Log file J0143-3200_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:17:25 2016