! Started logfile: J0141-0928_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:00:41 2017 obs J0141-0928_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0141-0928_S_2015_01_23_pus_uva.fits ! AN table 1: 43 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.858915 visibilities/baseline/integration-bin. ! Found source: J0141-0928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 6648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0141-0928_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.622795Jy sigma=0.006145 ! Fit after self-cal, rms=0.612697Jy sigma=0.006062 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=6.593 mas, bpa=-3.433 degrees ! Estimated noise=1179.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.32806 Jy ! Component: 100 - total flux cleaned = 0.411427 Jy ! Total flux subtracted in 100 components = 0.411427 Jy ! Clean residual min=-0.021654 max=0.034577 Jy/beam ! Clean residual mean=-0.000009 rms=0.005845 Jy/beam ! Combined flux in latest and established models = 0.411427 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.411427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200127Jy sigma=0.001561 ! Fit after self-cal, rms=0.200132Jy sigma=0.001561 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=7.743 mas, bpa=-4.991 degrees ! Estimated noise=935.698 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403072 Jy ! Component: 100 - total flux cleaned = 0.0577403 Jy ! Component: 150 - total flux cleaned = 0.0661613 Jy ! Component: 200 - total flux cleaned = 0.0696356 Jy ! Total flux subtracted in 200 components = 0.0696356 Jy ! Clean residual min=-0.020060 max=0.033937 Jy/beam ! Clean residual mean=-0.000024 rms=0.006992 Jy/beam ! Combined flux in latest and established models = 0.481063 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.481063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196097Jy sigma=0.001498 ! Fit after self-cal, rms=0.196104Jy sigma=0.001497 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.49 HN 0.94 KP 1.04 ! LA 1.07 MK 1.02 NL 1.69 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.83 HN 0.98 KP 0.95 ! LA 1.04 MK 1.04 NL 1.56 OV 0.95 ! PT 0.93 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 2.06 HN 1.00 KP 0.82 ! LA 0.85 MK 1.04 NL 1.32 OV 0.88 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.63 HN 0.94 KP 0.75 ! LA 0.90 MK 1.02 NL 0.99 OV 0.93 ! PT 0.97 SC 0.96 ! ! ! Fit before self-cal, rms=0.196104Jy sigma=0.001497 ! Fit after self-cal, rms=0.266430Jy sigma=0.001097 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=7.743 mas, bpa=-4.474 degrees ! Estimated noise=952.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545118 Jy ! Component: 100 - total flux cleaned = 0.00620145 Jy ! Component: 150 - total flux cleaned = 0.00664573 Jy ! Component: 200 - total flux cleaned = 0.00673579 Jy ! Total flux subtracted in 200 components = 0.00673579 Jy ! Clean residual min=-0.015623 max=0.013922 Jy/beam ! Clean residual mean=-0.000013 rms=0.004057 Jy/beam ! Combined flux in latest and established models = 0.487799 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.487799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265897Jy sigma=0.001098 ! Fit after self-cal, rms=0.266679Jy sigma=0.001096 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266679Jy sigma=0.001096 ! Fit after self-cal, rms=0.286111Jy sigma=0.000943 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=7.699 mas, bpa=-4.481 degrees ! Estimated noise=976.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108419 Jy ! Component: 100 - total flux cleaned = 0.0152652 Jy ! Component: 150 - total flux cleaned = 0.0159692 Jy ! Component: 200 - total flux cleaned = 0.0162711 Jy ! Total flux subtracted in 200 components = 0.0162711 Jy ! Clean residual min=-0.012853 max=0.009269 Jy/beam ! Clean residual mean=0.000011 rms=0.002768 Jy/beam ! Combined flux in latest and established models = 0.50407 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.50407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285050Jy sigma=0.000940 ! Fit after self-cal, rms=0.284946Jy sigma=0.000939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621632 Jy ! Component: 100 - total flux cleaned = 0.000792377 Jy ! Component: 150 - total flux cleaned = 0.000792469 Jy ! Component: 200 - total flux cleaned = 0.000728941 Jy ! Total flux subtracted in 200 components = 0.000728941 Jy ! Clean residual min=-0.012871 max=0.008974 Jy/beam ! Clean residual mean=0.000010 rms=0.002767 Jy/beam ! Combined flux in latest and established models = 0.504799 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.504799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284830Jy sigma=0.000939 ! Fit after self-cal, rms=0.284834Jy sigma=0.000939 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284834Jy sigma=0.000939 ! Fit after self-cal, rms=0.250736Jy sigma=0.000794 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=7.715 mas, bpa=-4.683 degrees ! Estimated noise=976.033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.32923e-06 Jy ! Component: 100 - total flux cleaned = -0.000331232 Jy ! Component: 150 - total flux cleaned = -0.000333317 Jy ! Component: 200 - total flux cleaned = -0.000334916 Jy ! Total flux subtracted in 200 components = -0.000334916 Jy ! Clean residual min=-0.003944 max=0.004936 Jy/beam ! Clean residual mean=-0.000001 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.504464 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.504464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250710Jy sigma=0.000793 ! Fit after self-cal, rms=0.250659Jy sigma=0.000793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428949 Jy ! Component: 100 - total flux cleaned = 0.00606812 Jy ! Component: 150 - total flux cleaned = 0.00620203 Jy ! Component: 200 - total flux cleaned = 0.00626 Jy ! Total flux subtracted in 200 components = 0.00626 Jy ! Clean residual min=-0.003352 max=0.003082 Jy/beam ! Clean residual mean=-0.000000 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.510724 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 104 components and 0.510724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250572Jy sigma=0.000791 ! Fit after self-cal, rms=0.250583Jy sigma=0.000790 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250583Jy sigma=0.000790 ! Fit after self-cal, rms=0.251135Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=13.92 mas, bpa=-0.5889 degrees ! Estimated noise=1239.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210473 Jy ! Component: 100 - total flux cleaned = 0.00225089 Jy ! Component: 150 - total flux cleaned = 0.00225003 Jy ! Component: 200 - total flux cleaned = 0.0023032 Jy ! Total flux subtracted in 200 components = 0.0023032 Jy ! Clean residual min=-0.003314 max=0.003495 Jy/beam ! Clean residual mean=-0.000000 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.513027 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 133 components and 0.513027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251113Jy sigma=0.000790 ! Fit after self-cal, rms=0.251111Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257248 Jy ! Component: 100 - total flux cleaned = 0.000460866 Jy ! Component: 150 - total flux cleaned = 0.000480034 Jy ! Component: 200 - total flux cleaned = 0.000464126 Jy ! Total flux subtracted in 200 components = 0.000464126 Jy ! Clean residual min=-0.003179 max=0.003431 Jy/beam ! Clean residual mean=-0.000000 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.513491 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 0.513491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251112Jy sigma=0.000790 ! Fit after self-cal, rms=0.251110Jy sigma=0.000790 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.717 mas, bpa=-4.775 degrees ! Estimated noise=974.949 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.717 at -4.775 degrees (North through East) ! Clean map min=-0.0030117 max=0.44213 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=6.587 mas, bpa=-3.196 degrees ! Estimated noise=1211.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.336812 Jy ! Component: 100 - total flux cleaned = 0.422449 Jy ! Component: 150 - total flux cleaned = 0.461041 Jy ! Component: 200 - total flux cleaned = 0.480213 Jy ! Total flux subtracted in 200 components = 0.480213 Jy ! Clean residual min=-0.005749 max=0.008925 Jy/beam ! Clean residual mean=-0.000005 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.480213 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.480213 Jy ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.717 mas, bpa=-4.775 degrees ! Estimated noise=974.949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130711 Jy ! Component: 100 - total flux cleaned = 0.0203726 Jy ! Component: 150 - total flux cleaned = 0.025241 Jy ! Component: 200 - total flux cleaned = 0.0286308 Jy ! Total flux subtracted in 200 components = 0.0286308 Jy ! Clean residual min=-0.003563 max=0.003469 Jy/beam ! Clean residual mean=-0.000001 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.508843 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 0.508843 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=13.92 mas, bpa=-0.5889 degrees ! Estimated noise=1239.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307586 Jy ! Component: 100 - total flux cleaned = 0.00464494 Jy ! Component: 150 - total flux cleaned = 0.00521758 Jy ! Component: 200 - total flux cleaned = 0.00527341 Jy ! Total flux subtracted in 200 components = 0.00527341 Jy ! Clean residual min=-0.003185 max=0.003459 Jy/beam ! Clean residual mean=-0.000000 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.514117 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.83671e-05 Jy ! Component: 100 - total flux cleaned = 2.79231e-05 Jy ! Component: 150 - total flux cleaned = 2.87117e-05 Jy ! Component: 200 - total flux cleaned = -8.94355e-06 Jy ! Total flux subtracted in 200 components = -8.94355e-06 Jy ! Clean residual min=-0.003145 max=0.003442 Jy/beam ! Clean residual mean=-0.000000 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.514108 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 91 components and 0.514108 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.717 mas, bpa=-4.775 degrees ! Estimated noise=974.949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.44306e-05 Jy ! Component: 100 - total flux cleaned = 9.33086e-05 Jy ! Component: 150 - total flux cleaned = 4.19213e-05 Jy ! Component: 200 - total flux cleaned = -5.5309e-06 Jy ! Total flux subtracted in 200 components = -5.5309e-06 Jy ! Clean residual min=-0.003170 max=0.003190 Jy/beam ! Clean residual mean=-0.000000 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.514102 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.514103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251132Jy sigma=0.000790 ! Fit after self-cal, rms=0.251119Jy sigma=0.000790 wmodel J0141-0928_S_2015_01_23_pus_map.mod ! Writing 107 model components to file: J0141-0928_S_2015_01_23_pus_map.mod wobs J0141-0928_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0141-0928_S_2015_01_23_pus_uvs.fits wwins J0141-0928_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0141-0928_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033021 Jy ! Component: 100 - total flux cleaned = -0.000653496 Jy ! Component: 150 - total flux cleaned = -0.000653339 Jy ! Component: 200 - total flux cleaned = -0.000407243 Jy ! Component: 250 - total flux cleaned = -0.000120503 Jy ! Component: 300 - total flux cleaned = 1.88577e-05 Jy ! Component: 350 - total flux cleaned = 0.000109206 Jy ! Component: 400 - total flux cleaned = 0.000109041 Jy ! Component: 450 - total flux cleaned = 0.000109692 Jy ! Component: 500 - total flux cleaned = 0.000238054 Jy ! Component: 550 - total flux cleaned = 0.000279473 Jy ! Component: 600 - total flux cleaned = 0.000320313 Jy ! Component: 650 - total flux cleaned = 0.000360579 Jy ! Component: 700 - total flux cleaned = 0.000360542 Jy ! Component: 750 - total flux cleaned = 0.000361704 Jy ! Component: 800 - total flux cleaned = 0.000439609 Jy ! Component: 850 - total flux cleaned = 0.000707409 Jy ! Component: 900 - total flux cleaned = 0.000745193 Jy ! Component: 950 - total flux cleaned = 0.000931061 Jy ! Component: 1000 - total flux cleaned = 0.00100417 Jy ! Component: 1050 - total flux cleaned = 0.00104082 Jy ! Component: 1100 - total flux cleaned = 0.00121891 Jy ! Component: 1150 - total flux cleaned = 0.00114791 Jy ! Component: 1200 - total flux cleaned = 0.00118305 Jy ! Component: 1250 - total flux cleaned = 0.00125221 Jy ! Component: 1300 - total flux cleaned = 0.00111522 Jy ! Component: 1350 - total flux cleaned = 0.00121723 Jy ! Component: 1400 - total flux cleaned = 0.00108275 Jy ! Component: 1450 - total flux cleaned = 0.00118324 Jy ! Component: 1500 - total flux cleaned = 0.0012159 Jy ! Component: 1550 - total flux cleaned = 0.00111742 Jy ! Component: 1600 - total flux cleaned = 0.00121509 Jy ! Component: 1650 - total flux cleaned = 0.00105377 Jy ! Component: 1700 - total flux cleaned = 0.00102162 Jy ! Component: 1750 - total flux cleaned = 0.00102162 Jy ! Component: 1800 - total flux cleaned = 0.000832821 Jy ! Component: 1850 - total flux cleaned = 0.000739348 Jy ! Component: 1900 - total flux cleaned = 0.000677262 Jy ! Component: 1950 - total flux cleaned = 0.000616003 Jy ! Component: 2000 - total flux cleaned = 0.000585553 Jy ! Component: 2050 - total flux cleaned = 0.000524907 Jy ! Component: 2100 - total flux cleaned = 0.000404833 Jy ! Component: 2150 - total flux cleaned = 0.000404886 Jy ! Component: 2200 - total flux cleaned = 0.00034585 Jy ! Component: 2250 - total flux cleaned = 0.000374945 Jy ! Component: 2300 - total flux cleaned = 0.00034568 Jy ! Component: 2350 - total flux cleaned = 0.000432712 Jy ! Component: 2400 - total flux cleaned = 0.000288126 Jy ! Component: 2450 - total flux cleaned = 0.000231146 Jy ! Component: 2500 - total flux cleaned = 0.000259312 Jy ! Component: 2550 - total flux cleaned = 0.000145818 Jy ! Component: 2600 - total flux cleaned = 6.13144e-05 Jy ! Component: 2650 - total flux cleaned = -2.29168e-05 Jy ! Component: 2700 - total flux cleaned = 5.1915e-06 Jy ! Component: 2750 - total flux cleaned = 5.24098e-06 Jy ! Component: 2800 - total flux cleaned = -7.71432e-05 Jy ! Component: 2850 - total flux cleaned = -4.94516e-05 Jy ! Component: 2900 - total flux cleaned = -2.2041e-05 Jy ! Component: 2950 - total flux cleaned = 5.07509e-06 Jy ! Component: 3000 - total flux cleaned = -7.53849e-05 Jy ! Component: 3050 - total flux cleaned = -7.50024e-05 Jy ! Component: 3100 - total flux cleaned = 4.58669e-06 Jy ! Component: 3150 - total flux cleaned = -4.82102e-05 Jy ! Component: 3200 - total flux cleaned = -4.83888e-05 Jy ! Component: 3250 - total flux cleaned = 5.59985e-05 Jy ! Component: 3300 - total flux cleaned = -4.82155e-05 Jy ! Component: 3350 - total flux cleaned = -7.40947e-05 Jy ! Component: 3400 - total flux cleaned = 3.08508e-06 Jy ! Component: 3450 - total flux cleaned = -0.000125086 Jy ! Component: 3500 - total flux cleaned = -0.000175963 Jy ! Component: 3550 - total flux cleaned = -0.000201141 Jy ! Component: 3600 - total flux cleaned = -0.000201301 Jy ! Component: 3650 - total flux cleaned = -0.000100731 Jy ! Component: 3700 - total flux cleaned = -0.000100797 Jy ! Component: 3750 - total flux cleaned = -7.60764e-05 Jy ! Component: 3800 - total flux cleaned = -0.000174852 Jy ! Component: 3850 - total flux cleaned = -0.000150308 Jy ! Component: 3900 - total flux cleaned = -7.69636e-05 Jy ! Component: 3950 - total flux cleaned = -0.000101288 Jy ! Component: 4000 - total flux cleaned = -0.000101137 Jy ! Component: 4050 - total flux cleaned = -0.000101227 Jy ! Total flux subtracted in 4096 components = -7.72429e-05 Jy ! Clean residual min=-0.001352 max=0.001438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.514025 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 393 components and 0.514025 Jy ![Exited script file: muppet] wmap "J0141-0928_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.717 at -4.775 degrees (North through East) ! Clean map min=-0.0029507 max=0.44236 Jy/beam ! Writing clean map to FITS file: J0141-0928_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.442355 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000449519 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.304859 0.304859 0.609717 1.21943 2.43887 4.87774 9.75548 19.511 39.0219 78.0438 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.442 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.717 at -4.775 degrees (North through East) ! Clean map min=-0.0029507 max=0.44236 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0141-0928_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:00:46 2017