! Started logfile: J0141-0928_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:13:59 2017 obs J0141-0928_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0141-0928_S_2014_01_04_pus_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.283951 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0141-0928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0141-0928_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 378 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 390 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 384 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.738808Jy sigma=0.009529 ! Fit after self-cal, rms=0.730614Jy sigma=0.009428 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=5.746 mas, bpa=1.021 degrees ! Estimated noise=1660.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203114 Jy ! Component: 100 - total flux cleaned = 0.25735 Jy ! Total flux subtracted in 100 components = 0.25735 Jy ! Clean residual min=-0.015717 max=0.024849 Jy/beam ! Clean residual mean=0.000041 rms=0.004289 Jy/beam ! Combined flux in latest and established models = 0.25735 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.25735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106900Jy sigma=0.001200 ! Fit after self-cal, rms=0.106993Jy sigma=0.001200 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=6.068 mas, bpa=2.721 degrees ! Estimated noise=972.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326834 Jy ! Component: 100 - total flux cleaned = 0.0488931 Jy ! Component: 150 - total flux cleaned = 0.0594282 Jy ! Component: 200 - total flux cleaned = 0.0663983 Jy ! Total flux subtracted in 200 components = 0.0663983 Jy ! Clean residual min=-0.010582 max=0.014936 Jy/beam ! Clean residual mean=0.000025 rms=0.003040 Jy/beam ! Combined flux in latest and established models = 0.323749 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.323749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094629Jy sigma=0.001079 ! Fit after self-cal, rms=0.094648Jy sigma=0.001078 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.99 ! MK 1.04 NL 0.91 OV 0.94 PT 0.98 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.96 ! MK 0.98 NL 1.00 OV 0.97 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.79 ! MK 1.02 NL 0.94 OV 0.92 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.86 ! MK 0.97 NL 1.03 OV 1.00 PT 0.99 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.094648Jy sigma=0.001078 ! Fit after self-cal, rms=0.086102Jy sigma=0.001010 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=6.173 mas, bpa=2.895 degrees ! Estimated noise=967.935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161069 Jy ! Component: 100 - total flux cleaned = -0.00172762 Jy ! Component: 150 - total flux cleaned = -0.00164112 Jy ! Component: 200 - total flux cleaned = -0.00164452 Jy ! Total flux subtracted in 200 components = -0.00164452 Jy ! Clean residual min=-0.009270 max=0.008369 Jy/beam ! Clean residual mean=0.000003 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.322104 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.322104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085778Jy sigma=0.001008 ! Fit after self-cal, rms=0.085333Jy sigma=0.001008 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085333Jy sigma=0.001008 ! Fit after self-cal, rms=0.084811Jy sigma=0.000964 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=6.144 mas, bpa=2.644 degrees ! Estimated noise=969.512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235367 Jy ! Component: 100 - total flux cleaned = -0.00262466 Jy ! Component: 150 - total flux cleaned = -0.00285768 Jy ! Component: 200 - total flux cleaned = -0.00299101 Jy ! Total flux subtracted in 200 components = -0.00299101 Jy ! Clean residual min=-0.003711 max=0.003821 Jy/beam ! Clean residual mean=0.000007 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.319113 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.319113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084603Jy sigma=0.000962 ! Fit after self-cal, rms=0.084598Jy sigma=0.000962 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105026 Jy ! Component: 100 - total flux cleaned = -0.000216335 Jy ! Component: 150 - total flux cleaned = -0.000369415 Jy ! Component: 200 - total flux cleaned = -0.000551535 Jy ! Total flux subtracted in 200 components = -0.000551535 Jy ! Clean residual min=-0.003717 max=0.003617 Jy/beam ! Clean residual mean=0.000008 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.318562 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.318562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084520Jy sigma=0.000961 ! Fit after self-cal, rms=0.084526Jy sigma=0.000961 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084526Jy sigma=0.000961 ! Fit after self-cal, rms=0.084477Jy sigma=0.000961 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=6.148 mas, bpa=2.555 degrees ! Estimated noise=968.788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117927 Jy ! Component: 100 - total flux cleaned = -0.00136036 Jy ! Component: 150 - total flux cleaned = -0.00151864 Jy ! Component: 200 - total flux cleaned = -0.0016617 Jy ! Total flux subtracted in 200 components = -0.0016617 Jy ! Clean residual min=-0.003604 max=0.003323 Jy/beam ! Clean residual mean=0.000007 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.3169 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.3169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084387Jy sigma=0.000960 ! Fit after self-cal, rms=0.084367Jy sigma=0.000960 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168426 Jy ! Component: 100 - total flux cleaned = -0.000286439 Jy ! Component: 150 - total flux cleaned = -0.000393896 Jy ! Component: 200 - total flux cleaned = -0.000527028 Jy ! Total flux subtracted in 200 components = -0.000527028 Jy ! Clean residual min=-0.003647 max=0.003179 Jy/beam ! Clean residual mean=0.000008 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.316373 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.316373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084327Jy sigma=0.000960 ! Fit after self-cal, rms=0.084334Jy sigma=0.000960 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084334Jy sigma=0.000960 ! Fit after self-cal, rms=0.084314Jy sigma=0.000959 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.976 mas, bmaj=11.46 mas, bpa=5.493 degrees ! Estimated noise=1220.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.08287e-06 Jy ! Component: 100 - total flux cleaned = -8.04611e-05 Jy ! Component: 150 - total flux cleaned = -0.00013421 Jy ! Component: 200 - total flux cleaned = -0.000197481 Jy ! Total flux subtracted in 200 components = -0.000197481 Jy ! Clean residual min=-0.004098 max=0.003828 Jy/beam ! Clean residual mean=0.000017 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.316175 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.316175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084295Jy sigma=0.000959 ! Fit after self-cal, rms=0.084277Jy sigma=0.000959 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.1509e-05 Jy ! Component: 100 - total flux cleaned = -1.74248e-05 Jy ! Component: 150 - total flux cleaned = -6.07412e-05 Jy ! Component: 200 - total flux cleaned = -8.59701e-05 Jy ! Total flux subtracted in 200 components = -8.59701e-05 Jy ! Clean residual min=-0.004081 max=0.003829 Jy/beam ! Clean residual mean=0.000017 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.316089 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.316089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084269Jy sigma=0.000959 ! Fit after self-cal, rms=0.084273Jy sigma=0.000959 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=6.152 mas, bpa=2.499 degrees ! Estimated noise=968.306 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.874 x 6.152 at 2.499 degrees (North through East) ! Clean map min=-0.0033731 max=0.26797 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.456 mas, bmaj=5.798 mas, bpa=1.009 degrees ! Estimated noise=1666.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203349 Jy ! Component: 100 - total flux cleaned = 0.259591 Jy ! Component: 150 - total flux cleaned = 0.285592 Jy ! Component: 200 - total flux cleaned = 0.298076 Jy ! Total flux subtracted in 200 components = 0.298076 Jy ! Clean residual min=-0.007069 max=0.007060 Jy/beam ! Clean residual mean=0.000011 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.298076 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.298076 Jy ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=6.152 mas, bpa=2.499 degrees ! Estimated noise=968.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00841574 Jy ! Component: 100 - total flux cleaned = 0.0124513 Jy ! Component: 150 - total flux cleaned = 0.0142068 Jy ! Component: 200 - total flux cleaned = 0.014642 Jy ! Total flux subtracted in 200 components = 0.014642 Jy ! Clean residual min=-0.003566 max=0.003478 Jy/beam ! Clean residual mean=0.000009 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.312718 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.312718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.976 mas, bmaj=11.46 mas, bpa=5.493 degrees ! Estimated noise=1220.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013993 Jy ! Component: 100 - total flux cleaned = 0.00167497 Jy ! Component: 150 - total flux cleaned = 0.0017917 Jy ! Component: 200 - total flux cleaned = 0.00187859 Jy ! Total flux subtracted in 200 components = 0.00187859 Jy ! Clean residual min=-0.004030 max=0.003850 Jy/beam ! Clean residual mean=0.000019 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.314597 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103551 Jy ! Component: 100 - total flux cleaned = 0.00018242 Jy ! Component: 150 - total flux cleaned = 0.00027468 Jy ! Component: 200 - total flux cleaned = 0.000346589 Jy ! Total flux subtracted in 200 components = 0.000346589 Jy ! Clean residual min=-0.004016 max=0.003829 Jy/beam ! Clean residual mean=0.000018 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.314943 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 0.314943 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=6.152 mas, bpa=2.499 degrees ! Estimated noise=968.306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000686894 Jy ! Component: 100 - total flux cleaned = -0.000829459 Jy ! Component: 150 - total flux cleaned = -0.00102937 Jy ! Component: 200 - total flux cleaned = -0.00102959 Jy ! Total flux subtracted in 200 components = -0.00102959 Jy ! Clean residual min=-0.003575 max=0.003308 Jy/beam ! Clean residual mean=0.000008 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.313913 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.313914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084291Jy sigma=0.000960 ! Fit after self-cal, rms=0.084281Jy sigma=0.000959 wmodel J0141-0928_S_2014_01_04_pus_map.mod ! Writing 35 model components to file: J0141-0928_S_2014_01_04_pus_map.mod wobs J0141-0928_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0141-0928_S_2014_01_04_pus_uvs.fits wwins J0141-0928_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0141-0928_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000310297 Jy ! Component: 100 - total flux cleaned = 0.000190232 Jy ! Component: 150 - total flux cleaned = 0.00065791 Jy ! Component: 200 - total flux cleaned = 0.000855878 Jy ! Component: 250 - total flux cleaned = 0.00108917 Jy ! Component: 300 - total flux cleaned = 0.00135473 Jy ! Component: 350 - total flux cleaned = 0.00165608 Jy ! Component: 400 - total flux cleaned = 0.00182272 Jy ! Component: 450 - total flux cleaned = 0.0019844 Jy ! Component: 500 - total flux cleaned = 0.00214082 Jy ! Component: 550 - total flux cleaned = 0.00225327 Jy ! Component: 600 - total flux cleaned = 0.00228874 Jy ! Component: 650 - total flux cleaned = 0.00236069 Jy ! Component: 700 - total flux cleaned = 0.00246614 Jy ! Component: 750 - total flux cleaned = 0.00250021 Jy ! Component: 800 - total flux cleaned = 0.00260097 Jy ! Component: 850 - total flux cleaned = 0.00260092 Jy ! Component: 900 - total flux cleaned = 0.00266497 Jy ! Component: 950 - total flux cleaned = 0.00266574 Jy ! Component: 1000 - total flux cleaned = 0.00272675 Jy ! Component: 1050 - total flux cleaned = 0.0027572 Jy ! Component: 1100 - total flux cleaned = 0.00281553 Jy ! Component: 1150 - total flux cleaned = 0.00292968 Jy ! Component: 1200 - total flux cleaned = 0.00301255 Jy ! Component: 1250 - total flux cleaned = 0.00303924 Jy ! Component: 1300 - total flux cleaned = 0.00312002 Jy ! Component: 1350 - total flux cleaned = 0.00327832 Jy ! Component: 1400 - total flux cleaned = 0.00335583 Jy ! Component: 1450 - total flux cleaned = 0.00345796 Jy ! Component: 1500 - total flux cleaned = 0.00350861 Jy ! Component: 1550 - total flux cleaned = 0.00368054 Jy ! Component: 1600 - total flux cleaned = 0.00375297 Jy ! Component: 1650 - total flux cleaned = 0.00382488 Jy ! Component: 1700 - total flux cleaned = 0.003942 Jy ! Component: 1750 - total flux cleaned = 0.0040798 Jy ! Component: 1800 - total flux cleaned = 0.0041931 Jy ! Component: 1850 - total flux cleaned = 0.00428252 Jy ! Component: 1900 - total flux cleaned = 0.00445887 Jy ! Component: 1950 - total flux cleaned = 0.00456723 Jy ! Component: 2000 - total flux cleaned = 0.00467393 Jy ! Component: 2050 - total flux cleaned = 0.00477989 Jy ! Component: 2100 - total flux cleaned = 0.00498788 Jy ! Component: 2150 - total flux cleaned = 0.00504941 Jy ! Component: 2200 - total flux cleaned = 0.00517031 Jy ! Component: 2250 - total flux cleaned = 0.00519016 Jy ! Component: 2300 - total flux cleaned = 0.00528874 Jy ! Component: 2350 - total flux cleaned = 0.00528912 Jy ! Component: 2400 - total flux cleaned = 0.00532766 Jy ! Component: 2450 - total flux cleaned = 0.00540394 Jy ! Component: 2500 - total flux cleaned = 0.00551656 Jy ! Component: 2550 - total flux cleaned = 0.00562825 Jy ! Component: 2600 - total flux cleaned = 0.00570205 Jy ! Component: 2650 - total flux cleaned = 0.00575679 Jy ! Component: 2700 - total flux cleaned = 0.00584709 Jy ! Component: 2750 - total flux cleaned = 0.00590051 Jy ! Component: 2800 - total flux cleaned = 0.00598905 Jy ! Component: 2850 - total flux cleaned = 0.00609397 Jy ! Component: 2900 - total flux cleaned = 0.00614631 Jy ! Component: 2950 - total flux cleaned = 0.00623241 Jy ! Component: 3000 - total flux cleaned = 0.00636864 Jy ! Component: 3050 - total flux cleaned = 0.00641911 Jy ! Component: 3100 - total flux cleaned = 0.00651904 Jy ! Component: 3150 - total flux cleaned = 0.00650271 Jy ! Component: 3200 - total flux cleaned = 0.00661763 Jy ! Component: 3250 - total flux cleaned = 0.00668251 Jy ! Component: 3300 - total flux cleaned = 0.00677917 Jy ! Component: 3350 - total flux cleaned = 0.00684289 Jy ! Component: 3400 - total flux cleaned = 0.00687464 Jy ! Component: 3450 - total flux cleaned = 0.00698432 Jy ! Component: 3500 - total flux cleaned = 0.00703104 Jy ! Component: 3550 - total flux cleaned = 0.00704655 Jy ! Component: 3600 - total flux cleaned = 0.00712325 Jy ! Component: 3650 - total flux cleaned = 0.00713855 Jy ! Component: 3700 - total flux cleaned = 0.00715367 Jy ! Component: 3750 - total flux cleaned = 0.00716868 Jy ! Component: 3800 - total flux cleaned = 0.00719849 Jy ! Component: 3850 - total flux cleaned = 0.00722785 Jy ! Component: 3900 - total flux cleaned = 0.00725715 Jy ! Component: 3950 - total flux cleaned = 0.00728634 Jy ! Component: 4000 - total flux cleaned = 0.00725721 Jy ! Component: 4050 - total flux cleaned = 0.00734395 Jy ! Total flux subtracted in 4096 components = 0.00728641 Jy ! Clean residual min=-0.000894 max=0.000880 Jy/beam ! Clean residual mean=0.000008 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.3212 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 308 components and 0.3212 Jy ![Exited script file: muppet] wmap "J0141-0928_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.874 x 6.152 at 2.499 degrees (North through East) ! Clean map min=-0.0033124 max=0.26834 Jy/beam ! Writing clean map to FITS file: J0141-0928_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.268344 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252877 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.282708 0.282708 0.565417 1.13083 2.26167 4.52334 9.04667 18.0933 36.1867 72.3734 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.268 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.874 x 6.152 at 2.499 degrees (North through East) ! Clean map min=-0.0033124 max=0.26834 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0141-0928_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:14:03 2017