! Started logfile: J0136+4751_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:40:06 2016 obs J0136+4751_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0136+4751_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.647619 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0136+4751_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.478801Jy sigma=0.005236 ! Fit after self-cal, rms=0.464496Jy sigma=0.005040 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=11.23 mas, bpa=45.29 degrees ! Estimated noise=1962.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.846767 Jy ! Component: 100 - total flux cleaned = 1.14734 Jy ! Total flux subtracted in 100 components = 1.14734 Jy ! Clean residual min=-0.067764 max=0.134283 Jy/beam ! Clean residual mean=-0.000913 rms=0.023856 Jy/beam ! Combined flux in latest and established models = 1.14734 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.14734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349056Jy sigma=0.003688 ! Fit after self-cal, rms=0.347861Jy sigma=0.003677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=11.05 mas, bpa=45.32 degrees ! Estimated noise=1532.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198694 Jy ! Component: 100 - total flux cleaned = 0.311165 Jy ! Component: 150 - total flux cleaned = 0.384918 Jy ! Component: 200 - total flux cleaned = 0.434945 Jy ! Total flux subtracted in 200 components = 0.434945 Jy ! Clean residual min=-0.043339 max=0.046788 Jy/beam ! Clean residual mean=-0.000418 rms=0.010544 Jy/beam ! Combined flux in latest and established models = 1.58228 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 45 components and 1.58228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179162Jy sigma=0.001841 ! Fit after self-cal, rms=0.177823Jy sigma=0.001826 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.00* KP 1.08 ! LA 0.95 MK 1.08 NL 0.85 OV 0.99 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 1.00* KP 1.04 ! LA 0.92 MK 1.10 NL 0.95 OV 1.01 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.00* KP 0.94 ! LA 0.75 MK 1.13 NL 1.07 OV 0.95 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 1.00* KP 0.91 ! LA 0.81 MK 1.14 NL 0.97 OV 0.99 ! PT 1.04 SC 0.95 ! ! ! Fit before self-cal, rms=0.177823Jy sigma=0.001826 ! Fit after self-cal, rms=0.081854Jy sigma=0.000926 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=11.09 mas, bpa=45.37 degrees ! Estimated noise=1514.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0085072 Jy ! Component: 100 - total flux cleaned = -0.0071579 Jy ! Component: 150 - total flux cleaned = -0.00543314 Jy ! Component: 200 - total flux cleaned = -0.00377804 Jy ! Total flux subtracted in 200 components = -0.00377804 Jy ! Clean residual min=-0.016055 max=0.014519 Jy/beam ! Clean residual mean=-0.000002 rms=0.003410 Jy/beam ! Combined flux in latest and established models = 1.57851 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 1.57851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076933Jy sigma=0.000867 ! Fit after self-cal, rms=0.076099Jy sigma=0.000859 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076099Jy sigma=0.000859 ! Fit after self-cal, rms=0.076093Jy sigma=0.000857 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=11.07 mas, bpa=45.4 degrees ! Estimated noise=1515.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234645 Jy ! Component: 100 - total flux cleaned = -0.000729384 Jy ! Component: 150 - total flux cleaned = 0.00015342 Jy ! Component: 200 - total flux cleaned = 0.000710341 Jy ! Total flux subtracted in 200 components = 0.000710341 Jy ! Clean residual min=-0.013355 max=0.012167 Jy/beam ! Clean residual mean=-0.000004 rms=0.002886 Jy/beam ! Combined flux in latest and established models = 1.57922 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 1.57922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074335Jy sigma=0.000836 ! Fit after self-cal, rms=0.073958Jy sigma=0.000833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116468 Jy ! Component: 100 - total flux cleaned = 3.82131e-05 Jy ! Component: 150 - total flux cleaned = 0.000864186 Jy ! Component: 200 - total flux cleaned = 0.00143373 Jy ! Total flux subtracted in 200 components = 0.00143373 Jy ! Clean residual min=-0.011938 max=0.011218 Jy/beam ! Clean residual mean=-0.000002 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 1.58065 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 1.58065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073285Jy sigma=0.000824 ! Fit after self-cal, rms=0.073038Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073038Jy sigma=0.000823 ! Fit after self-cal, rms=0.072887Jy sigma=0.000819 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=11.05 mas, bpa=45.43 degrees ! Estimated noise=1515.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114774 Jy ! Component: 100 - total flux cleaned = 0.000116095 Jy ! Component: 150 - total flux cleaned = 0.000719149 Jy ! Component: 200 - total flux cleaned = 0.00112462 Jy ! Total flux subtracted in 200 components = 0.00112462 Jy ! Clean residual min=-0.010432 max=0.010260 Jy/beam ! Clean residual mean=-0.000005 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 1.58177 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 1.58177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072249Jy sigma=0.000812 ! Fit after self-cal, rms=0.072086Jy sigma=0.000810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000333241 Jy ! Component: 100 - total flux cleaned = 0.000704198 Jy ! Component: 150 - total flux cleaned = 0.00105578 Jy ! Component: 200 - total flux cleaned = 0.00120743 Jy ! Total flux subtracted in 200 components = 0.00120743 Jy ! Clean residual min=-0.009568 max=0.010019 Jy/beam ! Clean residual mean=-0.000004 rms=0.002342 Jy/beam ! Combined flux in latest and established models = 1.58298 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 1.58298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071807Jy sigma=0.000807 ! Fit after self-cal, rms=0.071693Jy sigma=0.000806 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071693Jy sigma=0.000806 ! Fit after self-cal, rms=0.071681Jy sigma=0.000805 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.353 mas, bmaj=10.93 mas, bpa=48.11 degrees ! Estimated noise=1813.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711708 Jy ! Component: 100 - total flux cleaned = 0.00141667 Jy ! Component: 150 - total flux cleaned = 0.00219802 Jy ! Component: 200 - total flux cleaned = 0.00281025 Jy ! Total flux subtracted in 200 components = 0.00281025 Jy ! Clean residual min=-0.009644 max=0.011958 Jy/beam ! Clean residual mean=-0.000021 rms=0.002799 Jy/beam ! Combined flux in latest and established models = 1.58579 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 116 components and 1.58579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071543Jy sigma=0.000802 ! Fit after self-cal, rms=0.071425Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423065 Jy ! Component: 100 - total flux cleaned = 6.39081e-05 Jy ! Component: 150 - total flux cleaned = 0.000321167 Jy ! Component: 200 - total flux cleaned = 0.000460211 Jy ! Total flux subtracted in 200 components = 0.000460211 Jy ! Clean residual min=-0.009372 max=0.011429 Jy/beam ! Clean residual mean=-0.000020 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 1.58625 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 122 components and 1.58625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071318Jy sigma=0.000800 ! Fit after self-cal, rms=0.071260Jy sigma=0.000799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=11.04 mas, bpa=45.46 degrees ! Estimated noise=1515.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.309 x 11.04 at 45.46 degrees (North through East) ! Clean map min=-0.012813 max=1.1131 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071260Jy sigma=0.000799 ! Fit after self-cal, rms=0.066574Jy sigma=0.000740 ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=11.03 mas, bpa=45.47 degrees ! Estimated noise=1515.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.85367e-05 Jy ! Component: 100 - total flux cleaned = -0.000592264 Jy ! Component: 150 - total flux cleaned = -0.000857362 Jy ! Component: 200 - total flux cleaned = -0.000702524 Jy ! Total flux subtracted in 200 components = -0.000702524 Jy ! Clean residual min=-0.008461 max=0.008163 Jy/beam ! Clean residual mean=-0.000002 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 1.58555 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 131 components and 1.58555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066251Jy sigma=0.000737 ! Fit after self-cal, rms=0.066219Jy sigma=0.000737 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58662e-05 Jy ! Component: 100 - total flux cleaned = 0.000157541 Jy ! Component: 150 - total flux cleaned = 0.000219588 Jy ! Component: 200 - total flux cleaned = 0.000219024 Jy ! Total flux subtracted in 200 components = 0.000219024 Jy ! Clean residual min=-0.008195 max=0.007838 Jy/beam ! Clean residual mean=-0.000002 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 1.58577 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 1.58577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066082Jy sigma=0.000735 ! Fit after self-cal, rms=0.066055Jy sigma=0.000735 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066055Jy sigma=0.000735 ! Fit after self-cal, rms=0.066107Jy sigma=0.000734 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=11.19 mas, bpa=45.4 degrees ! Estimated noise=1935.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.833315 Jy ! Component: 100 - total flux cleaned = 1.12662 Jy ! Component: 150 - total flux cleaned = 1.26989 Jy ! Component: 200 - total flux cleaned = 1.35153 Jy ! Total flux subtracted in 200 components = 1.35153 Jy ! Clean residual min=-0.023834 max=0.042942 Jy/beam ! Clean residual mean=-0.000340 rms=0.008118 Jy/beam ! Combined flux in latest and established models = 1.35153 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.35153 Jy ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=11.02 mas, bpa=45.49 degrees ! Estimated noise=1515.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754884 Jy ! Component: 100 - total flux cleaned = 0.120837 Jy ! Component: 150 - total flux cleaned = 0.150908 Jy ! Component: 200 - total flux cleaned = 0.172271 Jy ! Total flux subtracted in 200 components = 0.172271 Jy ! Clean residual min=-0.012439 max=0.014888 Jy/beam ! Clean residual mean=-0.000112 rms=0.003631 Jy/beam ! Combined flux in latest and established models = 1.5238 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 74 components and 1.5238 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.364 mas, bmaj=10.92 mas, bpa=48.23 degrees ! Estimated noise=1811.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252874 Jy ! Component: 100 - total flux cleaned = 0.0402797 Jy ! Component: 150 - total flux cleaned = 0.0497406 Jy ! Component: 200 - total flux cleaned = 0.054375 Jy ! Total flux subtracted in 200 components = 0.054375 Jy ! Clean residual min=-0.010372 max=0.010232 Jy/beam ! Clean residual mean=-0.000046 rms=0.002840 Jy/beam ! Combined flux in latest and established models = 1.57818 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206291 Jy ! Component: 100 - total flux cleaned = 0.00352788 Jy ! Component: 150 - total flux cleaned = 0.00469096 Jy ! Component: 200 - total flux cleaned = 0.00561913 Jy ! Total flux subtracted in 200 components = 0.00561913 Jy ! Clean residual min=-0.008835 max=0.010852 Jy/beam ! Clean residual mean=-0.000027 rms=0.002636 Jy/beam ! Combined flux in latest and established models = 1.5838 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 132 components and 1.5838 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=11.02 mas, bpa=45.49 degrees ! Estimated noise=1515.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129609 Jy ! Component: 100 - total flux cleaned = -0.00103584 Jy ! Component: 150 - total flux cleaned = -0.000915365 Jy ! Component: 200 - total flux cleaned = -0.000818654 Jy ! Total flux subtracted in 200 components = -0.000818654 Jy ! Clean residual min=-0.007703 max=0.008276 Jy/beam ! Clean residual mean=-0.000009 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 1.58298 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 147 components and 1.58298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066464Jy sigma=0.000739 ! Fit after self-cal, rms=0.066059Jy sigma=0.000735 wmodel J0136+4751_S_2015_03_17_pus_map.mod ! Writing 147 model components to file: J0136+4751_S_2015_03_17_pus_map.mod wobs J0136+4751_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0136+4751_S_2015_03_17_pus_uvs.fits wwins J0136+4751_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0136+4751_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133169 Jy ! Component: 100 - total flux cleaned = 0.000234536 Jy ! Component: 150 - total flux cleaned = 0.000689494 Jy ! Component: 200 - total flux cleaned = 0.00143414 Jy ! Component: 250 - total flux cleaned = 0.00232973 Jy ! Component: 300 - total flux cleaned = 0.00298913 Jy ! Component: 350 - total flux cleaned = 0.00325665 Jy ! Component: 400 - total flux cleaned = 0.00325521 Jy ! Component: 450 - total flux cleaned = 0.00341582 Jy ! Component: 500 - total flux cleaned = 0.00341537 Jy ! Component: 550 - total flux cleaned = 0.00363987 Jy ! Component: 600 - total flux cleaned = 0.00364052 Jy ! Component: 650 - total flux cleaned = 0.00398685 Jy ! Component: 700 - total flux cleaned = 0.0040517 Jy ! Component: 750 - total flux cleaned = 0.00411682 Jy ! Component: 800 - total flux cleaned = 0.00417654 Jy ! Component: 850 - total flux cleaned = 0.00423481 Jy ! Component: 900 - total flux cleaned = 0.00440859 Jy ! Component: 950 - total flux cleaned = 0.00452144 Jy ! Component: 1000 - total flux cleaned = 0.00463011 Jy ! Component: 1050 - total flux cleaned = 0.00478894 Jy ! Component: 1100 - total flux cleaned = 0.00478724 Jy ! Component: 1150 - total flux cleaned = 0.0047372 Jy ! Component: 1200 - total flux cleaned = 0.00483382 Jy ! Component: 1250 - total flux cleaned = 0.00497425 Jy ! Component: 1300 - total flux cleaned = 0.00501895 Jy ! Component: 1350 - total flux cleaned = 0.00501908 Jy ! Component: 1400 - total flux cleaned = 0.00519316 Jy ! Component: 1450 - total flux cleaned = 0.00523492 Jy ! Component: 1500 - total flux cleaned = 0.00535926 Jy ! Component: 1550 - total flux cleaned = 0.00536026 Jy ! Component: 1600 - total flux cleaned = 0.00543939 Jy ! Component: 1650 - total flux cleaned = 0.00536267 Jy ! Component: 1700 - total flux cleaned = 0.00540096 Jy ! Component: 1750 - total flux cleaned = 0.00565972 Jy ! Component: 1800 - total flux cleaned = 0.00558633 Jy ! Component: 1850 - total flux cleaned = 0.00565707 Jy ! Component: 1900 - total flux cleaned = 0.00548231 Jy ! Component: 1950 - total flux cleaned = 0.00555123 Jy ! Component: 2000 - total flux cleaned = 0.00545042 Jy ! Component: 2050 - total flux cleaned = 0.00541776 Jy ! Component: 2100 - total flux cleaned = 0.00535253 Jy ! Component: 2150 - total flux cleaned = 0.00532093 Jy ! Component: 2200 - total flux cleaned = 0.00525758 Jy ! Component: 2250 - total flux cleaned = 0.00516449 Jy ! Component: 2300 - total flux cleaned = 0.00516441 Jy ! Component: 2350 - total flux cleaned = 0.00507323 Jy ! Component: 2400 - total flux cleaned = 0.00501323 Jy ! Component: 2450 - total flux cleaned = 0.00495449 Jy ! Component: 2500 - total flux cleaned = 0.00486726 Jy ! Component: 2550 - total flux cleaned = 0.00469541 Jy ! Component: 2600 - total flux cleaned = 0.00475193 Jy ! Component: 2650 - total flux cleaned = 0.00464005 Jy ! Component: 2700 - total flux cleaned = 0.00453007 Jy ! Component: 2750 - total flux cleaned = 0.00447563 Jy ! Component: 2800 - total flux cleaned = 0.00442172 Jy ! Component: 2850 - total flux cleaned = 0.00431561 Jy ! Component: 2900 - total flux cleaned = 0.00442088 Jy ! Component: 2950 - total flux cleaned = 0.00442059 Jy ! Component: 3000 - total flux cleaned = 0.00439474 Jy ! Component: 3050 - total flux cleaned = 0.00444547 Jy ! Component: 3100 - total flux cleaned = 0.00439523 Jy ! Component: 3150 - total flux cleaned = 0.00439553 Jy ! Component: 3200 - total flux cleaned = 0.00434635 Jy ! Component: 3250 - total flux cleaned = 0.00429734 Jy ! Component: 3300 - total flux cleaned = 0.00420052 Jy ! Component: 3350 - total flux cleaned = 0.00408037 Jy ! Component: 3400 - total flux cleaned = 0.00405651 Jy ! Component: 3450 - total flux cleaned = 0.00393823 Jy ! Component: 3500 - total flux cleaned = 0.00389165 Jy ! Component: 3550 - total flux cleaned = 0.00375212 Jy ! Component: 3600 - total flux cleaned = 0.00363681 Jy ! Component: 3650 - total flux cleaned = 0.00354526 Jy ! Component: 3700 - total flux cleaned = 0.00347716 Jy ! Component: 3750 - total flux cleaned = 0.00345438 Jy ! Component: 3800 - total flux cleaned = 0.00334177 Jy ! Component: 3850 - total flux cleaned = 0.00322999 Jy ! Component: 3900 - total flux cleaned = 0.00314126 Jy ! Component: 3950 - total flux cleaned = 0.00307513 Jy ! Component: 4000 - total flux cleaned = 0.0030313 Jy ! Component: 4050 - total flux cleaned = 0.00296596 Jy ! Total flux subtracted in 4096 components = 0.00290091 Jy ! Clean residual min=-0.001229 max=0.001130 Jy/beam ! Clean residual mean=-0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 1.58588 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 458 components and 1.58588 Jy ![Exited script file: muppet] wmap "J0136+4751_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 11.02 at 45.49 degrees (North through East) ! Clean map min=-0.0076062 max=1.1184 Jy/beam ! Writing clean map to FITS file: J0136+4751_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.11839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000397936 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106743 0.106743 0.213486 0.426973 0.853945 1.70789 3.41578 6.83156 13.6631 27.3263 54.6525 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 11.02 at 45.49 degrees (North through East) ! Clean map min=-0.0076062 max=1.1184 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0136+4751_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:40:13 2016