! Started logfile: J0132+4325_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:13:45 2017 obs J0132+4325_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0132+4325_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0132+4325 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0132+4325_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.775670Jy sigma=0.012285 ! Fit after self-cal, rms=0.756016Jy sigma=0.012106 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=4.406 mas, bpa=-36.89 degrees ! Estimated noise=859.663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186414 Jy ! Component: 100 - total flux cleaned = 0.227248 Jy ! Total flux subtracted in 100 components = 0.227248 Jy ! Clean residual min=-0.010142 max=0.015068 Jy/beam ! Clean residual mean=0.000018 rms=0.002759 Jy/beam ! Combined flux in latest and established models = 0.227248 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.227248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077058Jy sigma=0.001018 ! Fit after self-cal, rms=0.077046Jy sigma=0.001018 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.239 mas, bmaj=5.019 mas, bpa=-35.38 degrees ! Estimated noise=644.474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014863 Jy ! Component: 100 - total flux cleaned = 0.0225869 Jy ! Component: 150 - total flux cleaned = 0.027206 Jy ! Component: 200 - total flux cleaned = 0.0294581 Jy ! Total flux subtracted in 200 components = 0.0294581 Jy ! Clean residual min=-0.007289 max=0.009506 Jy/beam ! Clean residual mean=0.000024 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.256706 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.256706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072857Jy sigma=0.000991 ! Fit after self-cal, rms=0.072783Jy sigma=0.000990 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.04 ! MK 0.99 NL 0.93 OV 0.98 PT 1.01 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.99 ! MK 1.01 NL 0.98 OV 0.99 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.82 ! MK 1.02 NL 0.97 OV 0.94 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.87 ! MK 0.98 NL 1.05 OV 1.00 PT 1.00 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.072783Jy sigma=0.000990 ! Fit after self-cal, rms=0.066023Jy sigma=0.000907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.22 mas, bmaj=5.028 mas, bpa=-33.92 degrees ! Estimated noise=646.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490421 Jy ! Component: 100 - total flux cleaned = -0.000781872 Jy ! Component: 150 - total flux cleaned = -0.000929282 Jy ! Component: 200 - total flux cleaned = -0.00105678 Jy ! Total flux subtracted in 200 components = -0.00105678 Jy ! Clean residual min=-0.002829 max=0.003293 Jy/beam ! Clean residual mean=0.000001 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.255649 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.255649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065908Jy sigma=0.000905 ! Fit after self-cal, rms=0.065638Jy sigma=0.000905 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065638Jy sigma=0.000905 ! Fit after self-cal, rms=0.065265Jy sigma=0.000903 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.203 mas, bmaj=5.038 mas, bpa=-34.04 degrees ! Estimated noise=645.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388849 Jy ! Component: 100 - total flux cleaned = -0.000385816 Jy ! Component: 150 - total flux cleaned = -0.000439899 Jy ! Component: 200 - total flux cleaned = -0.000511387 Jy ! Total flux subtracted in 200 components = -0.000511387 Jy ! Clean residual min=-0.002616 max=0.003084 Jy/beam ! Clean residual mean=0.000001 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.255138 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.255138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065219Jy sigma=0.000903 ! Fit after self-cal, rms=0.065210Jy sigma=0.000902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290677 Jy ! Component: 100 - total flux cleaned = 0.00411444 Jy ! Component: 150 - total flux cleaned = 0.00451495 Jy ! Component: 200 - total flux cleaned = 0.00458145 Jy ! Total flux subtracted in 200 components = 0.00458145 Jy ! Clean residual min=-0.002244 max=0.002327 Jy/beam ! Clean residual mean=-0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.25972 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 56 components and 0.25972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065074Jy sigma=0.000900 ! Fit after self-cal, rms=0.065058Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065058Jy sigma=0.000900 ! Fit after self-cal, rms=0.064909Jy sigma=0.000900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.197 mas, bmaj=5.033 mas, bpa=-34.11 degrees ! Estimated noise=643.735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300183 Jy ! Component: 100 - total flux cleaned = 0.000489325 Jy ! Component: 150 - total flux cleaned = 0.000601682 Jy ! Component: 200 - total flux cleaned = 0.000728022 Jy ! Total flux subtracted in 200 components = 0.000728022 Jy ! Clean residual min=-0.002026 max=0.002251 Jy/beam ! Clean residual mean=0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.260448 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 66 components and 0.260448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064881Jy sigma=0.000900 ! Fit after self-cal, rms=0.064886Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54541e-05 Jy ! Component: 100 - total flux cleaned = 0.000127701 Jy ! Component: 150 - total flux cleaned = 0.000209562 Jy ! Component: 200 - total flux cleaned = 0.00028556 Jy ! Total flux subtracted in 200 components = 0.00028556 Jy ! Clean residual min=-0.001934 max=0.002222 Jy/beam ! Clean residual mean=0.000001 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.260733 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.260733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064872Jy sigma=0.000899 ! Fit after self-cal, rms=0.064871Jy sigma=0.000899 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064871Jy sigma=0.000899 ! Fit after self-cal, rms=0.064791Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.428 mas, bmaj=9.085 mas, bpa=-9.506 degrees ! Estimated noise=741.679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10669e-05 Jy ! Component: 100 - total flux cleaned = 0.00020332 Jy ! Component: 150 - total flux cleaned = 0.000373632 Jy ! Component: 200 - total flux cleaned = 0.000503109 Jy ! Total flux subtracted in 200 components = 0.000503109 Jy ! Clean residual min=-0.001729 max=0.002131 Jy/beam ! Clean residual mean=0.000004 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.261236 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.261236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064787Jy sigma=0.000899 ! Fit after self-cal, rms=0.064788Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.53884e-05 Jy ! Component: 100 - total flux cleaned = 4.14936e-05 Jy ! Component: 150 - total flux cleaned = 9.97348e-05 Jy ! Component: 200 - total flux cleaned = 0.00012276 Jy ! Total flux subtracted in 200 components = 0.00012276 Jy ! Clean residual min=-0.001715 max=0.002082 Jy/beam ! Clean residual mean=0.000004 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.261359 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.261359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064786Jy sigma=0.000899 ! Fit after self-cal, rms=0.064785Jy sigma=0.000899 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=5.033 mas, bpa=-34.15 degrees ! Estimated noise=643.108 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 5.033 at -34.15 degrees (North through East) ! Clean map min=-0.0018131 max=0.23586 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=4.395 mas, bpa=-35.49 degrees ! Estimated noise=857.414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185918 Jy ! Component: 100 - total flux cleaned = 0.227169 Jy ! Component: 150 - total flux cleaned = 0.239277 Jy ! Component: 200 - total flux cleaned = 0.245235 Jy ! Total flux subtracted in 200 components = 0.245235 Jy ! Clean residual min=-0.003762 max=0.003493 Jy/beam ! Clean residual mean=0.000004 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.245235 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.245235 Jy ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=5.033 mas, bpa=-34.15 degrees ! Estimated noise=643.108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004319 Jy ! Component: 100 - total flux cleaned = 0.00697034 Jy ! Component: 150 - total flux cleaned = 0.00889318 Jy ! Component: 200 - total flux cleaned = 0.0103879 Jy ! Total flux subtracted in 200 components = 0.0103879 Jy ! Clean residual min=-0.002193 max=0.002482 Jy/beam ! Clean residual mean=0.000006 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.255623 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.255623 Jy ! Inverting map ! Added new window around map position (81, 125). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218981 Jy ! Component: 100 - total flux cleaned = 0.00329299 Jy ! Component: 150 - total flux cleaned = 0.00411979 Jy ! Component: 200 - total flux cleaned = 0.00483385 Jy ! Total flux subtracted in 200 components = 0.00483385 Jy ! Clean residual min=-0.002035 max=0.001805 Jy/beam ! Clean residual mean=0.000004 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.260457 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.260457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.428 mas, bmaj=9.085 mas, bpa=-9.506 degrees ! Estimated noise=741.679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952283 Jy ! Component: 100 - total flux cleaned = 0.00155325 Jy ! Component: 150 - total flux cleaned = 0.00184877 Jy ! Component: 200 - total flux cleaned = 0.00201959 Jy ! Total flux subtracted in 200 components = 0.00201959 Jy ! Clean residual min=-0.001638 max=0.001638 Jy/beam ! Clean residual mean=0.000004 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.262477 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109694 Jy ! Component: 100 - total flux cleaned = 0.000208852 Jy ! Component: 150 - total flux cleaned = 0.00027702 Jy ! Component: 200 - total flux cleaned = 0.000329701 Jy ! Total flux subtracted in 200 components = 0.000329701 Jy ! Clean residual min=-0.001601 max=0.001630 Jy/beam ! Clean residual mean=0.000004 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.262806 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 88 components and 0.262806 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=5.033 mas, bpa=-34.15 degrees ! Estimated noise=643.108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.13673e-06 Jy ! Component: 100 - total flux cleaned = -7.89221e-05 Jy ! Component: 150 - total flux cleaned = -7.81658e-05 Jy ! Component: 200 - total flux cleaned = -0.000121245 Jy ! Total flux subtracted in 200 components = -0.000121245 Jy ! Clean residual min=-0.001708 max=0.001630 Jy/beam ! Clean residual mean=0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.262685 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.262685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064710Jy sigma=0.000898 ! Fit after self-cal, rms=0.064699Jy sigma=0.000898 wmodel J0132+4325_S_2014_01_04_pus_map.mod ! Writing 97 model components to file: J0132+4325_S_2014_01_04_pus_map.mod wobs J0132+4325_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0132+4325_S_2014_01_04_pus_uvs.fits wwins J0132+4325_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0132+4325_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238988 Jy ! Component: 100 - total flux cleaned = -0.000323938 Jy ! Component: 150 - total flux cleaned = -0.000323858 Jy ! Component: 200 - total flux cleaned = -0.000298484 Jy ! Component: 250 - total flux cleaned = -0.000347368 Jy ! Component: 300 - total flux cleaned = -0.000393509 Jy ! Component: 350 - total flux cleaned = -0.000438207 Jy ! Component: 400 - total flux cleaned = -0.000503832 Jy ! Component: 450 - total flux cleaned = -0.000589296 Jy ! Component: 500 - total flux cleaned = -0.000672399 Jy ! Component: 550 - total flux cleaned = -0.000692388 Jy ! Component: 600 - total flux cleaned = -0.000731789 Jy ! Component: 650 - total flux cleaned = -0.000751125 Jy ! Component: 700 - total flux cleaned = -0.000807541 Jy ! Component: 750 - total flux cleaned = -0.000899176 Jy ! Component: 800 - total flux cleaned = -0.000970799 Jy ! Component: 850 - total flux cleaned = -0.00100582 Jy ! Component: 900 - total flux cleaned = -0.00107488 Jy ! Component: 950 - total flux cleaned = -0.0011256 Jy ! Component: 1000 - total flux cleaned = -0.001159 Jy ! Component: 1050 - total flux cleaned = -0.00122427 Jy ! Component: 1100 - total flux cleaned = -0.00122413 Jy ! Component: 1150 - total flux cleaned = -0.00127168 Jy ! Component: 1200 - total flux cleaned = -0.00128758 Jy ! Component: 1250 - total flux cleaned = -0.00136434 Jy ! Component: 1300 - total flux cleaned = -0.00137926 Jy ! Component: 1350 - total flux cleaned = -0.00139436 Jy ! Component: 1400 - total flux cleaned = -0.00140946 Jy ! Component: 1450 - total flux cleaned = -0.00143851 Jy ! Component: 1500 - total flux cleaned = -0.00146713 Jy ! Component: 1550 - total flux cleaned = -0.00150911 Jy ! Component: 1600 - total flux cleaned = -0.00148137 Jy ! Component: 1650 - total flux cleaned = -0.00150875 Jy ! Component: 1700 - total flux cleaned = -0.00148169 Jy ! Component: 1750 - total flux cleaned = -0.00146843 Jy ! Component: 1800 - total flux cleaned = -0.00145535 Jy ! Component: 1850 - total flux cleaned = -0.00150761 Jy ! Component: 1900 - total flux cleaned = -0.00149464 Jy ! Component: 1950 - total flux cleaned = -0.00153292 Jy ! Component: 2000 - total flux cleaned = -0.00155808 Jy ! Component: 2050 - total flux cleaned = -0.00158291 Jy ! Component: 2100 - total flux cleaned = -0.00157051 Jy ! Component: 2150 - total flux cleaned = -0.00161946 Jy ! Component: 2200 - total flux cleaned = -0.00159533 Jy ! Component: 2250 - total flux cleaned = -0.00160724 Jy ! Component: 2300 - total flux cleaned = -0.00161909 Jy ! Component: 2350 - total flux cleaned = -0.00157221 Jy ! Component: 2400 - total flux cleaned = -0.0015955 Jy ! Component: 2450 - total flux cleaned = -0.00156102 Jy ! Component: 2500 - total flux cleaned = -0.00157245 Jy ! Component: 2550 - total flux cleaned = -0.00154984 Jy ! Component: 2600 - total flux cleaned = -0.00158339 Jy ! Component: 2650 - total flux cleaned = -0.0015834 Jy ! Component: 2700 - total flux cleaned = -0.00158338 Jy ! Component: 2750 - total flux cleaned = -0.00160529 Jy ! Component: 2800 - total flux cleaned = -0.00163781 Jy ! Component: 2850 - total flux cleaned = -0.0016486 Jy ! Component: 2900 - total flux cleaned = -0.00163781 Jy ! Component: 2950 - total flux cleaned = -0.00166988 Jy ! Component: 3000 - total flux cleaned = -0.00169096 Jy ! Component: 3050 - total flux cleaned = -0.00170147 Jy ! Component: 3100 - total flux cleaned = -0.00170154 Jy ! Component: 3150 - total flux cleaned = -0.00172234 Jy ! Component: 3200 - total flux cleaned = -0.00170194 Jy ! Component: 3250 - total flux cleaned = -0.00173253 Jy ! Component: 3300 - total flux cleaned = -0.00174261 Jy ! Component: 3350 - total flux cleaned = -0.00177282 Jy ! Component: 3400 - total flux cleaned = -0.00179285 Jy ! Component: 3450 - total flux cleaned = -0.00180277 Jy ! Component: 3500 - total flux cleaned = -0.0018225 Jy ! Component: 3550 - total flux cleaned = -0.00185188 Jy ! Component: 3600 - total flux cleaned = -0.00186167 Jy ! Component: 3650 - total flux cleaned = -0.00188106 Jy ! Component: 3700 - total flux cleaned = -0.0019195 Jy ! Component: 3750 - total flux cleaned = -0.00192908 Jy ! Component: 3800 - total flux cleaned = -0.00191022 Jy ! Component: 3850 - total flux cleaned = -0.00192912 Jy ! Component: 3900 - total flux cleaned = -0.00194791 Jy ! Component: 3950 - total flux cleaned = -0.00192914 Jy ! Component: 4000 - total flux cleaned = -0.00191984 Jy ! Component: 4050 - total flux cleaned = -0.00191055 Jy ! Total flux subtracted in 4096 components = -0.00191055 Jy ! Clean residual min=-0.000610 max=0.000687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.260775 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 329 components and 0.260775 Jy ![Exited script file: muppet] wmap "J0132+4325_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 5.033 at -34.15 degrees (North through East) ! Clean map min=-0.0012806 max=0.2382 Jy/beam ! Writing clean map to FITS file: J0132+4325_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.238203 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153948 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.193886 0.193886 0.387772 0.775545 1.55109 3.10218 6.20436 12.4087 24.8174 49.6349 99.2697 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.238 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 5.033 at -34.15 degrees (North through East) ! Clean map min=-0.0012806 max=0.2382 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0132+4325_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:13:50 2017