! Started logfile: J0128+4901_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:13:41 2017 obs J0128+4901_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0128+4901_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.498889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0128+4901 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0128+4901_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.845964Jy sigma=0.013180 ! Fit after self-cal, rms=0.836756Jy sigma=0.013040 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=4.522 mas, bpa=-42.94 degrees ! Estimated noise=1108.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124138 Jy ! Component: 100 - total flux cleaned = 0.16988 Jy ! Total flux subtracted in 100 components = 0.16988 Jy ! Clean residual min=-0.010240 max=0.019593 Jy/beam ! Clean residual mean=0.000019 rms=0.003501 Jy/beam ! Combined flux in latest and established models = 0.16988 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.16988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083246Jy sigma=0.001118 ! Fit after self-cal, rms=0.083026Jy sigma=0.001115 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.169 mas, bmaj=4.99 mas, bpa=-42.28 degrees ! Estimated noise=654.407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287583 Jy ! Component: 100 - total flux cleaned = 0.0431997 Jy ! Component: 150 - total flux cleaned = 0.0507141 Jy ! Component: 200 - total flux cleaned = 0.0552831 Jy ! Total flux subtracted in 200 components = 0.0552831 Jy ! Clean residual min=-0.006350 max=0.009270 Jy/beam ! Clean residual mean=0.000037 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.225163 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.225163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072113Jy sigma=0.000968 ! Fit after self-cal, rms=0.071793Jy sigma=0.000967 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 1.00 ! MK 0.95 NL 0.97 OV 0.96 PT 1.01 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.97 ! MK 0.98 NL 1.05 OV 0.98 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.81 ! MK 0.93 NL 0.99 OV 0.91 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.00* KP 1.00* LA 0.87 ! MK 0.81 NL 1.05 OV 0.98 PT 0.99 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.071793Jy sigma=0.000967 ! Fit after self-cal, rms=0.065671Jy sigma=0.000909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.054 mas, bmaj=5.061 mas, bpa=-42.02 degrees ! Estimated noise=645.052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433281 Jy ! Component: 100 - total flux cleaned = -0.000710252 Jy ! Component: 150 - total flux cleaned = -0.000771173 Jy ! Component: 200 - total flux cleaned = -0.000771324 Jy ! Total flux subtracted in 200 components = -0.000771324 Jy ! Clean residual min=-0.003648 max=0.003176 Jy/beam ! Clean residual mean=0.000016 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.224392 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.224392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065542Jy sigma=0.000907 ! Fit after self-cal, rms=0.065257Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065257Jy sigma=0.000906 ! Fit after self-cal, rms=0.063991Jy sigma=0.000901 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.981 mas, bmaj=5.118 mas, bpa=-41.91 degrees ! Estimated noise=640.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.39863e-05 Jy ! Component: 100 - total flux cleaned = -0.000109946 Jy ! Component: 150 - total flux cleaned = -0.000134633 Jy ! Component: 200 - total flux cleaned = -0.000134376 Jy ! Total flux subtracted in 200 components = -0.000134376 Jy ! Clean residual min=-0.002595 max=0.002445 Jy/beam ! Clean residual mean=0.000007 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.224257 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.224257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063957Jy sigma=0.000901 ! Fit after self-cal, rms=0.063964Jy sigma=0.000901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.9117e-05 Jy ! Component: 100 - total flux cleaned = 6.27088e-05 Jy ! Component: 150 - total flux cleaned = 8.27692e-05 Jy ! Component: 200 - total flux cleaned = 8.3343e-05 Jy ! Total flux subtracted in 200 components = 8.3343e-05 Jy ! Clean residual min=-0.002566 max=0.002416 Jy/beam ! Clean residual mean=0.000007 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.224341 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.224341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063947Jy sigma=0.000901 ! Fit after self-cal, rms=0.063946Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063946Jy sigma=0.000900 ! Fit after self-cal, rms=0.063634Jy sigma=0.000900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=5.124 mas, bpa=-41.96 degrees ! Estimated noise=638.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.16859e-05 Jy ! Component: 100 - total flux cleaned = 3.46105e-05 Jy ! Component: 150 - total flux cleaned = 3.49655e-05 Jy ! Component: 200 - total flux cleaned = 3.48423e-05 Jy ! Total flux subtracted in 200 components = 3.48423e-05 Jy ! Clean residual min=-0.002483 max=0.002362 Jy/beam ! Clean residual mean=0.000007 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.224376 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.224376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063616Jy sigma=0.000900 ! Fit after self-cal, rms=0.063607Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.20269e-05 Jy ! Component: 100 - total flux cleaned = -3.45322e-05 Jy ! Component: 150 - total flux cleaned = -1.92854e-05 Jy ! Component: 200 - total flux cleaned = -4.46028e-06 Jy ! Total flux subtracted in 200 components = -4.46028e-06 Jy ! Clean residual min=-0.002451 max=0.002336 Jy/beam ! Clean residual mean=0.000007 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.224371 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.224371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063596Jy sigma=0.000900 ! Fit after self-cal, rms=0.063595Jy sigma=0.000900 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063595Jy sigma=0.000900 ! Fit after self-cal, rms=0.063409Jy sigma=0.000900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.443 mas, bmaj=8.984 mas, bpa=-32.02 degrees ! Estimated noise=746.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748897 Jy ! Component: 100 - total flux cleaned = 0.000806965 Jy ! Component: 150 - total flux cleaned = 0.00085666 Jy ! Component: 200 - total flux cleaned = 0.000911981 Jy ! Total flux subtracted in 200 components = 0.000911981 Jy ! Clean residual min=-0.002375 max=0.002053 Jy/beam ! Clean residual mean=0.000015 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.225283 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.225283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063406Jy sigma=0.000900 ! Fit after self-cal, rms=0.063390Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174489 Jy ! Component: 100 - total flux cleaned = 0.000225322 Jy ! Component: 150 - total flux cleaned = 0.000268058 Jy ! Component: 200 - total flux cleaned = 0.000305605 Jy ! Total flux subtracted in 200 components = 0.000305605 Jy ! Clean residual min=-0.002345 max=0.002005 Jy/beam ! Clean residual mean=0.000015 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.225589 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.225589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063391Jy sigma=0.000900 ! Fit after self-cal, rms=0.063385Jy sigma=0.000900 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=5.126 mas, bpa=-42.01 degrees ! Estimated noise=637.922 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.958 x 5.126 at -42.01 degrees (North through East) ! Clean map min=-0.0022318 max=0.15264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=4.644 mas, bpa=-42.73 degrees ! Estimated noise=1064.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121361 Jy ! Component: 100 - total flux cleaned = 0.167591 Jy ! Component: 150 - total flux cleaned = 0.190896 Jy ! Component: 200 - total flux cleaned = 0.204468 Jy ! Total flux subtracted in 200 components = 0.204468 Jy ! Clean residual min=-0.005304 max=0.006805 Jy/beam ! Clean residual mean=0.000005 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.204468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.204468 Jy ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=5.126 mas, bpa=-42.01 degrees ! Estimated noise=637.922 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104105 Jy ! Component: 100 - total flux cleaned = 0.0156798 Jy ! Component: 150 - total flux cleaned = 0.0184 Jy ! Component: 200 - total flux cleaned = 0.0195221 Jy ! Total flux subtracted in 200 components = 0.0195221 Jy ! Clean residual min=-0.002590 max=0.002817 Jy/beam ! Clean residual mean=0.000008 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.22399 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.22399 Jy ! Inverting map ! Added new window around map position (33, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129064 Jy ! Component: 100 - total flux cleaned = 0.0012901 Jy ! Component: 150 - total flux cleaned = 0.0013489 Jy ! Component: 200 - total flux cleaned = 0.00121846 Jy ! Total flux subtracted in 200 components = 0.00121846 Jy ! Clean residual min=-0.002649 max=0.002312 Jy/beam ! Clean residual mean=0.000006 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.225209 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.225209 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.443 mas, bmaj=8.984 mas, bpa=-32.02 degrees ! Estimated noise=746.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485109 Jy ! Component: 100 - total flux cleaned = 0.000427656 Jy ! Component: 150 - total flux cleaned = 0.000498429 Jy ! Component: 200 - total flux cleaned = 0.000562484 Jy ! Total flux subtracted in 200 components = 0.000562484 Jy ! Clean residual min=-0.002179 max=0.001780 Jy/beam ! Clean residual mean=0.000011 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.225771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93037e-05 Jy ! Component: 100 - total flux cleaned = 5.84065e-05 Jy ! Component: 150 - total flux cleaned = 7.6155e-05 Jy ! Component: 200 - total flux cleaned = 7.5982e-05 Jy ! Total flux subtracted in 200 components = 7.5982e-05 Jy ! Clean residual min=-0.002100 max=0.001746 Jy/beam ! Clean residual mean=0.000011 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.225847 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.225847 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=5.126 mas, bpa=-42.01 degrees ! Estimated noise=637.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0004057 Jy ! Component: 100 - total flux cleaned = -0.000628693 Jy ! Component: 150 - total flux cleaned = -0.000661897 Jy ! Component: 200 - total flux cleaned = -0.000722507 Jy ! Total flux subtracted in 200 components = -0.000722507 Jy ! Clean residual min=-0.002403 max=0.001966 Jy/beam ! Clean residual mean=0.000006 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.225124 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.225124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063349Jy sigma=0.000899 ! Fit after self-cal, rms=0.063355Jy sigma=0.000899 wmodel J0128+4901_S_2014_01_04_pus_map.mod ! Writing 88 model components to file: J0128+4901_S_2014_01_04_pus_map.mod wobs J0128+4901_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0128+4901_S_2014_01_04_pus_uvs.fits wwins J0128+4901_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0128+4901_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000621526 Jy ! Component: 100 - total flux cleaned = -0.000790425 Jy ! Component: 150 - total flux cleaned = -0.000947693 Jy ! Component: 200 - total flux cleaned = -0.00097719 Jy ! Component: 250 - total flux cleaned = -0.000920289 Jy ! Component: 300 - total flux cleaned = -0.000787615 Jy ! Component: 350 - total flux cleaned = -0.00081292 Jy ! Component: 400 - total flux cleaned = -0.000763982 Jy ! Component: 450 - total flux cleaned = -0.000717114 Jy ! Component: 500 - total flux cleaned = -0.000693937 Jy ! Component: 550 - total flux cleaned = -0.000628356 Jy ! Component: 600 - total flux cleaned = -0.000585922 Jy ! Component: 650 - total flux cleaned = -0.000483775 Jy ! Component: 700 - total flux cleaned = -0.000424301 Jy ! Component: 750 - total flux cleaned = -0.000346725 Jy ! Component: 800 - total flux cleaned = -0.000289577 Jy ! Component: 850 - total flux cleaned = -0.000196287 Jy ! Component: 900 - total flux cleaned = -0.000142018 Jy ! Component: 950 - total flux cleaned = -8.79775e-05 Jy ! Component: 1000 - total flux cleaned = -3.50064e-05 Jy ! Component: 1050 - total flux cleaned = 1.67861e-05 Jy ! Component: 1100 - total flux cleaned = 6.75475e-05 Jy ! Component: 1150 - total flux cleaned = 1.79114e-05 Jy ! Component: 1200 - total flux cleaned = 8.29072e-05 Jy ! Component: 1250 - total flux cleaned = 9.86552e-05 Jy ! Component: 1300 - total flux cleaned = 0.000114355 Jy ! Component: 1350 - total flux cleaned = 0.000160584 Jy ! Component: 1400 - total flux cleaned = 0.000175913 Jy ! Component: 1450 - total flux cleaned = 0.000221184 Jy ! Component: 1500 - total flux cleaned = 0.000294988 Jy ! Component: 1550 - total flux cleaned = 0.000324003 Jy ! Component: 1600 - total flux cleaned = 0.00030968 Jy ! Component: 1650 - total flux cleaned = 0.000423163 Jy ! Component: 1700 - total flux cleaned = 0.000409286 Jy ! Component: 1750 - total flux cleaned = 0.000409275 Jy ! Component: 1800 - total flux cleaned = 0.000409423 Jy ! Component: 1850 - total flux cleaned = 0.000422956 Jy ! Component: 1900 - total flux cleaned = 0.000476345 Jy ! Component: 1950 - total flux cleaned = 0.000436555 Jy ! Component: 2000 - total flux cleaned = 0.000410332 Jy ! Component: 2050 - total flux cleaned = 0.000423173 Jy ! Component: 2100 - total flux cleaned = 0.000397698 Jy ! Component: 2150 - total flux cleaned = 0.000372656 Jy ! Component: 2200 - total flux cleaned = 0.000372676 Jy ! Component: 2250 - total flux cleaned = 0.000360299 Jy ! Component: 2300 - total flux cleaned = 0.000360399 Jy ! Component: 2350 - total flux cleaned = 0.00033637 Jy ! Component: 2400 - total flux cleaned = 0.000360602 Jy ! Component: 2450 - total flux cleaned = 0.00038444 Jy ! Component: 2500 - total flux cleaned = 0.00034928 Jy ! Component: 2550 - total flux cleaned = 0.000395813 Jy ! Component: 2600 - total flux cleaned = 0.000384167 Jy ! Component: 2650 - total flux cleaned = 0.000349965 Jy ! Component: 2700 - total flux cleaned = 0.000395248 Jy ! Component: 2750 - total flux cleaned = 0.000417602 Jy ! Component: 2800 - total flux cleaned = 0.000406626 Jy ! Component: 2850 - total flux cleaned = 0.000395659 Jy ! Component: 2900 - total flux cleaned = 0.000384738 Jy ! Component: 2950 - total flux cleaned = 0.000384881 Jy ! Component: 3000 - total flux cleaned = 0.000406366 Jy ! Component: 3050 - total flux cleaned = 0.000438395 Jy ! Component: 3100 - total flux cleaned = 0.00042788 Jy ! Component: 3150 - total flux cleaned = 0.000469818 Jy ! Component: 3200 - total flux cleaned = 0.000459378 Jy ! Component: 3250 - total flux cleaned = 0.00042837 Jy ! Component: 3300 - total flux cleaned = 0.000438678 Jy ! Component: 3350 - total flux cleaned = 0.000438747 Jy ! Component: 3400 - total flux cleaned = 0.000428648 Jy ! Component: 3450 - total flux cleaned = 0.00045888 Jy ! Component: 3500 - total flux cleaned = 0.000428842 Jy ! Component: 3550 - total flux cleaned = 0.000438825 Jy ! Component: 3600 - total flux cleaned = 0.000458638 Jy ! Component: 3650 - total flux cleaned = 0.000438923 Jy ! Component: 3700 - total flux cleaned = 0.000429112 Jy ! Component: 3750 - total flux cleaned = 0.000419388 Jy ! Component: 3800 - total flux cleaned = 0.000409784 Jy ! Component: 3850 - total flux cleaned = 0.000409858 Jy ! Component: 3900 - total flux cleaned = 0.000409874 Jy ! Component: 3950 - total flux cleaned = 0.000409899 Jy ! Component: 4000 - total flux cleaned = 0.000428948 Jy ! Component: 4050 - total flux cleaned = 0.000447901 Jy ! Total flux subtracted in 4096 components = 0.000438423 Jy ! Clean residual min=-0.000560 max=0.000559 Jy/beam ! Clean residual mean=0.000001 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.225563 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 334 components and 0.225563 Jy ![Exited script file: muppet] wmap "J0128+4901_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.958 x 5.126 at -42.01 degrees (North through East) ! Clean map min=-0.0015912 max=0.15257 Jy/beam ! Writing clean map to FITS file: J0128+4901_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.152569 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153247 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.301332 0.301332 0.602663 1.20533 2.41065 4.82131 9.64262 19.2852 38.5705 77.1409 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.958 x 5.126 at -42.01 degrees (North through East) ! Clean map min=-0.0015912 max=0.15257 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0128+4901_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:13:45 2017