! Started logfile: J0118-2141_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:39:28 2016 obs J0118-2141_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0118-2141_S_2015_03_17_pus_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.490535 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0118-2141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 2384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0118-2141_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.245850Jy sigma=0.002085 ! Fit after self-cal, rms=0.211823Jy sigma=0.001726 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.937 mas, bpa=-16.73 degrees ! Estimated noise=1959.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.754039 Jy ! Component: 100 - total flux cleaned = 0.940331 Jy ! Total flux subtracted in 100 components = 0.940331 Jy ! Clean residual min=-0.036641 max=0.073499 Jy/beam ! Clean residual mean=0.000079 rms=0.011808 Jy/beam ! Combined flux in latest and established models = 0.940331 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.940331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222197Jy sigma=0.001727 ! Fit after self-cal, rms=0.222189Jy sigma=0.001727 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0783041 Jy ! Component: 100 - total flux cleaned = 0.125356 Jy ! Total flux subtracted in 100 components = 0.125356 Jy ! Clean residual min=-0.037319 max=0.030085 Jy/beam ! Clean residual mean=0.000049 rms=0.008468 Jy/beam ! Combined flux in latest and established models = 1.06569 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 1.06569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172697Jy sigma=0.001360 ! Fit after self-cal, rms=0.172677Jy sigma=0.001360 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=7.863 mas, bpa=-14.26 degrees ! Estimated noise=1658.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419315 Jy ! Component: 100 - total flux cleaned = 0.0644949 Jy ! Component: 150 - total flux cleaned = 0.0777122 Jy ! Component: 200 - total flux cleaned = 0.0860232 Jy ! Total flux subtracted in 200 components = 0.0860232 Jy ! Clean residual min=-0.036794 max=0.026502 Jy/beam ! Clean residual mean=-0.000069 rms=0.008343 Jy/beam ! Combined flux in latest and established models = 1.15171 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 67 components and 1.15171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157536Jy sigma=0.001301 ! Fit after self-cal, rms=0.157487Jy sigma=0.001301 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.84 HN 0.99 KP 1.13 ! LA 1.00 MK 0.97 NL 0.90 OV 1.00 ! PT 1.09 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.86 HN 1.06 KP 1.08 ! LA 0.97 MK 1.00 NL 1.01 OV 1.06 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.88 HN 1.06 KP 0.96 ! LA 0.79 MK 1.04 NL 1.14 OV 0.97 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.92 HN 1.01 KP 0.93 ! LA 0.86 MK 1.04 NL 1.00 OV 1.04 ! PT 1.09 SC 0.98 ! ! ! Fit before self-cal, rms=0.157487Jy sigma=0.001301 ! Fit after self-cal, rms=0.090379Jy sigma=0.000786 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=7.91 mas, bpa=-14.15 degrees ! Estimated noise=1662.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00483913 Jy ! Component: 100 - total flux cleaned = -0.00591215 Jy ! Component: 150 - total flux cleaned = -0.00666092 Jy ! Component: 200 - total flux cleaned = -0.00713913 Jy ! Total flux subtracted in 200 components = -0.00713913 Jy ! Clean residual min=-0.010085 max=0.007383 Jy/beam ! Clean residual mean=0.000016 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 1.14457 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 71 components and 1.14457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090083Jy sigma=0.000783 ! Fit after self-cal, rms=0.090037Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090037Jy sigma=0.000783 ! Fit after self-cal, rms=0.089926Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=7.912 mas, bpa=-14.12 degrees ! Estimated noise=1661.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00339606 Jy ! Component: 100 - total flux cleaned = -0.00422448 Jy ! Component: 150 - total flux cleaned = -0.00476923 Jy ! Component: 200 - total flux cleaned = -0.00517156 Jy ! Total flux subtracted in 200 components = -0.00517156 Jy ! Clean residual min=-0.009880 max=0.007125 Jy/beam ! Clean residual mean=0.000014 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 1.1394 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 1.1394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089758Jy sigma=0.000781 ! Fit after self-cal, rms=0.089755Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330879 Jy ! Component: 100 - total flux cleaned = -0.000553087 Jy ! Component: 150 - total flux cleaned = -0.000655342 Jy ! Component: 200 - total flux cleaned = -0.000751549 Jy ! Total flux subtracted in 200 components = -0.000751549 Jy ! Clean residual min=-0.009715 max=0.007158 Jy/beam ! Clean residual mean=0.000014 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 1.13865 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 1.13865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089701Jy sigma=0.000780 ! Fit after self-cal, rms=0.089697Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089697Jy sigma=0.000780 ! Fit after self-cal, rms=0.089650Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=7.915 mas, bpa=-14.08 degrees ! Estimated noise=1661.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00248118 Jy ! Component: 100 - total flux cleaned = -0.00306353 Jy ! Component: 150 - total flux cleaned = -0.00356176 Jy ! Component: 200 - total flux cleaned = -0.0038873 Jy ! Total flux subtracted in 200 components = -0.0038873 Jy ! Clean residual min=-0.009682 max=0.006953 Jy/beam ! Clean residual mean=0.000012 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 1.13476 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 1.13476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089546Jy sigma=0.000779 ! Fit after self-cal, rms=0.089545Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016762 Jy ! Component: 100 - total flux cleaned = -0.000264151 Jy ! Component: 150 - total flux cleaned = -0.00031048 Jy ! Component: 200 - total flux cleaned = -0.000401099 Jy ! Total flux subtracted in 200 components = -0.000401099 Jy ! Clean residual min=-0.009494 max=0.006968 Jy/beam ! Clean residual mean=0.000012 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 1.13436 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 84 components and 1.13436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089502Jy sigma=0.000778 ! Fit after self-cal, rms=0.089501Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089501Jy sigma=0.000778 ! Fit after self-cal, rms=0.089477Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.514 mas, bmaj=15.66 mas, bpa=-12.31 degrees ! Estimated noise=2176.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00230382 Jy ! Component: 100 - total flux cleaned = -0.00255721 Jy ! Component: 150 - total flux cleaned = -0.00272044 Jy ! Component: 200 - total flux cleaned = -0.00286369 Jy ! Total flux subtracted in 200 components = -0.00286369 Jy ! Clean residual min=-0.008978 max=0.008026 Jy/beam ! Clean residual mean=0.000026 rms=0.002409 Jy/beam ! Combined flux in latest and established models = 1.1315 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 89 components and 1.1315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089515Jy sigma=0.000779 ! Fit after self-cal, rms=0.089497Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05878e-05 Jy ! Component: 100 - total flux cleaned = -7.91368e-05 Jy ! Component: 150 - total flux cleaned = -0.000160079 Jy ! Component: 200 - total flux cleaned = -0.000232073 Jy ! Total flux subtracted in 200 components = -0.000232073 Jy ! Clean residual min=-0.008931 max=0.008017 Jy/beam ! Clean residual mean=0.000025 rms=0.002389 Jy/beam ! Combined flux in latest and established models = 1.13126 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 1.13126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089558Jy sigma=0.000779 ! Fit after self-cal, rms=0.089548Jy sigma=0.000779 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.919 mas, bpa=-14.05 degrees ! Estimated noise=1661.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 7.919 at -14.05 degrees (North through East) ! Clean map min=-0.0089253 max=0.98885 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089548Jy sigma=0.000779 ! Fit after self-cal, rms=0.083795Jy sigma=0.000726 ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=7.917 mas, bpa=-13.97 degrees ! Estimated noise=1659.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198487 Jy ! Component: 100 - total flux cleaned = -0.00198639 Jy ! Component: 150 - total flux cleaned = -0.00204977 Jy ! Component: 200 - total flux cleaned = -0.00210951 Jy ! Total flux subtracted in 200 components = -0.00210951 Jy ! Clean residual min=-0.009312 max=0.006687 Jy/beam ! Clean residual mean=0.000010 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 1.12915 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 93 components and 1.12915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083678Jy sigma=0.000725 ! Fit after self-cal, rms=0.083677Jy sigma=0.000725 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116548 Jy ! Component: 100 - total flux cleaned = -0.000169385 Jy ! Component: 150 - total flux cleaned = -0.00022011 Jy ! Component: 200 - total flux cleaned = -0.000271029 Jy ! Total flux subtracted in 200 components = -0.000271029 Jy ! Clean residual min=-0.009152 max=0.006678 Jy/beam ! Clean residual mean=0.000010 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 1.12888 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 1.12888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083619Jy sigma=0.000725 ! Fit after self-cal, rms=0.083618Jy sigma=0.000725 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083618Jy sigma=0.000725 ! Fit after self-cal, rms=0.083596Jy sigma=0.000725 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=6.941 mas, bpa=-16.31 degrees ! Estimated noise=1974.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.759984 Jy ! Component: 100 - total flux cleaned = 0.939954 Jy ! Component: 150 - total flux cleaned = 1.01398 Jy ! Component: 200 - total flux cleaned = 1.05778 Jy ! Total flux subtracted in 200 components = 1.05778 Jy ! Clean residual min=-0.018772 max=0.022755 Jy/beam ! Clean residual mean=0.000024 rms=0.003980 Jy/beam ! Combined flux in latest and established models = 1.05778 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 1.05778 Jy ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.92 mas, bpa=-13.94 degrees ! Estimated noise=1658.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350574 Jy ! Component: 100 - total flux cleaned = 0.0530967 Jy ! Component: 150 - total flux cleaned = 0.0627496 Jy ! Component: 200 - total flux cleaned = 0.0656186 Jy ! Total flux subtracted in 200 components = 0.0656186 Jy ! Clean residual min=-0.011079 max=0.007528 Jy/beam ! Clean residual mean=0.000011 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 1.1234 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 67 components and 1.1234 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=15.66 mas, bpa=-12.25 degrees ! Estimated noise=2169.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037665 Jy ! Component: 100 - total flux cleaned = 0.00377836 Jy ! Component: 150 - total flux cleaned = 0.00378307 Jy ! Component: 200 - total flux cleaned = 0.00373643 Jy ! Total flux subtracted in 200 components = 0.00373643 Jy ! Clean residual min=-0.009094 max=0.007541 Jy/beam ! Clean residual mean=0.000025 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 1.12714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.44679e-05 Jy ! Component: 100 - total flux cleaned = -0.000126828 Jy ! Component: 150 - total flux cleaned = -0.00016491 Jy ! Component: 200 - total flux cleaned = -0.000200892 Jy ! Total flux subtracted in 200 components = -0.000200892 Jy ! Clean residual min=-0.009035 max=0.007568 Jy/beam ! Clean residual mean=0.000025 rms=0.002346 Jy/beam ! Combined flux in latest and established models = 1.12694 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 1.12694 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.92 mas, bpa=-13.94 degrees ! Estimated noise=1658.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956687 Jy ! Component: 100 - total flux cleaned = 0.000578317 Jy ! Component: 150 - total flux cleaned = 0.000359637 Jy ! Component: 200 - total flux cleaned = 0.000258439 Jy ! Total flux subtracted in 200 components = 0.000258439 Jy ! Clean residual min=-0.009345 max=0.007273 Jy/beam ! Clean residual mean=0.000010 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 1.12719 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 1.12719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083613Jy sigma=0.000725 ! Fit after self-cal, rms=0.083561Jy sigma=0.000725 wmodel J0118-2141_S_2015_03_17_pus_map.mod ! Writing 87 model components to file: J0118-2141_S_2015_03_17_pus_map.mod wobs J0118-2141_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0118-2141_S_2015_03_17_pus_uvs.fits wwins J0118-2141_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J0118-2141_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00394892 Jy ! Component: 100 - total flux cleaned = -0.00603397 Jy ! Component: 150 - total flux cleaned = -0.00778215 Jy ! Component: 200 - total flux cleaned = -0.00896612 Jy ! Component: 250 - total flux cleaned = -0.00966882 Jy ! Component: 300 - total flux cleaned = -0.0103306 Jy ! Component: 350 - total flux cleaned = -0.0108702 Jy ! Component: 400 - total flux cleaned = -0.0117219 Jy ! Component: 450 - total flux cleaned = -0.0122927 Jy ! Component: 500 - total flux cleaned = -0.0129173 Jy ! Component: 550 - total flux cleaned = -0.0133665 Jy ! Component: 600 - total flux cleaned = -0.0137988 Jy ! Component: 650 - total flux cleaned = -0.0139364 Jy ! Component: 700 - total flux cleaned = -0.0140682 Jy ! Component: 750 - total flux cleaned = -0.0139387 Jy ! Component: 800 - total flux cleaned = -0.0139388 Jy ! Component: 850 - total flux cleaned = -0.0141228 Jy ! Component: 900 - total flux cleaned = -0.0141822 Jy ! Component: 950 - total flux cleaned = -0.0142994 Jy ! Component: 1000 - total flux cleaned = -0.0144698 Jy ! Component: 1050 - total flux cleaned = -0.0145807 Jy ! Component: 1100 - total flux cleaned = -0.0148496 Jy ! Component: 1150 - total flux cleaned = -0.0149545 Jy ! Component: 1200 - total flux cleaned = -0.0152115 Jy ! Component: 1250 - total flux cleaned = -0.0154118 Jy ! Component: 1300 - total flux cleaned = -0.0155588 Jy ! Component: 1350 - total flux cleaned = -0.0155586 Jy ! Component: 1400 - total flux cleaned = -0.0156529 Jy ! Component: 1450 - total flux cleaned = -0.0156993 Jy ! Component: 1500 - total flux cleaned = -0.0156533 Jy ! Component: 1550 - total flux cleaned = -0.0156084 Jy ! Component: 1600 - total flux cleaned = -0.0156519 Jy ! Component: 1650 - total flux cleaned = -0.0156505 Jy ! Component: 1700 - total flux cleaned = -0.0155651 Jy ! Component: 1750 - total flux cleaned = -0.0156062 Jy ! Component: 1800 - total flux cleaned = -0.0156053 Jy ! Component: 1850 - total flux cleaned = -0.0155648 Jy ! Component: 1900 - total flux cleaned = -0.0156044 Jy ! Component: 1950 - total flux cleaned = -0.0155656 Jy ! Component: 2000 - total flux cleaned = -0.0154895 Jy ! Component: 2050 - total flux cleaned = -0.0156026 Jy ! Component: 2100 - total flux cleaned = -0.0156767 Jy ! Component: 2150 - total flux cleaned = -0.0155303 Jy ! Component: 2200 - total flux cleaned = -0.0155664 Jy ! Component: 2250 - total flux cleaned = -0.0154598 Jy ! Component: 2300 - total flux cleaned = -0.0153551 Jy ! Component: 2350 - total flux cleaned = -0.0153208 Jy ! Component: 2400 - total flux cleaned = -0.0151853 Jy ! Component: 2450 - total flux cleaned = -0.0151181 Jy ! Component: 2500 - total flux cleaned = -0.0149856 Jy ! Component: 2550 - total flux cleaned = -0.014822 Jy ! Component: 2600 - total flux cleaned = -0.0146609 Jy ! Component: 2650 - total flux cleaned = -0.0145327 Jy ! Component: 2700 - total flux cleaned = -0.0142805 Jy ! Component: 2750 - total flux cleaned = -0.0141873 Jy ! Component: 2800 - total flux cleaned = -0.0140331 Jy ! Component: 2850 - total flux cleaned = -0.0139112 Jy ! Component: 2900 - total flux cleaned = -0.0136406 Jy ! Component: 2950 - total flux cleaned = -0.0135518 Jy ! Component: 3000 - total flux cleaned = -0.0133755 Jy ! Component: 3050 - total flux cleaned = -0.0132887 Jy ! Component: 3100 - total flux cleaned = -0.0130877 Jy ! Component: 3150 - total flux cleaned = -0.0129176 Jy ! Component: 3200 - total flux cleaned = -0.0128055 Jy ! Component: 3250 - total flux cleaned = -0.0127222 Jy ! Component: 3300 - total flux cleaned = -0.0126122 Jy ! Component: 3350 - total flux cleaned = -0.0124486 Jy ! Component: 3400 - total flux cleaned = -0.0122604 Jy ! Component: 3450 - total flux cleaned = -0.012074 Jy ! Component: 3500 - total flux cleaned = -0.0119949 Jy ! Component: 3550 - total flux cleaned = -0.0118645 Jy ! Component: 3600 - total flux cleaned = -0.0116839 Jy ! Component: 3650 - total flux cleaned = -0.0115817 Jy ! Component: 3700 - total flux cleaned = -0.0114046 Jy ! Component: 3750 - total flux cleaned = -0.0112791 Jy ! Component: 3800 - total flux cleaned = -0.011155 Jy ! Component: 3850 - total flux cleaned = -0.0110812 Jy ! Component: 3900 - total flux cleaned = -0.0110324 Jy ! Component: 3950 - total flux cleaned = -0.0108873 Jy ! Component: 4000 - total flux cleaned = -0.0108632 Jy ! Component: 4050 - total flux cleaned = -0.0107683 Jy ! Total flux subtracted in 4096 components = -0.0106741 Jy ! Clean residual min=-0.001263 max=0.001363 Jy/beam ! Clean residual mean=0.000006 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 1.11652 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 338 components and 1.11652 Jy ![Exited script file: muppet] wmap "J0118-2141_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 7.92 at -13.94 degrees (North through East) ! Clean map min=-0.0038068 max=0.9904 Jy/beam ! Writing clean map to FITS file: J0118-2141_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.9904 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000405425 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122806 0.122806 0.245613 0.491226 0.982451 1.9649 3.9298 7.85961 15.7192 31.4384 62.8769 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.99 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 7.92 at -13.94 degrees (North through East) ! Clean map min=-0.0038068 max=0.9904 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0118-2141_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:39:35 2016