! Started logfile: J0117+1418_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:40:33 2016 obs J0117+1418_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0117+1418_S_2014_06_09_pus_uva.fits ! AN table 1: 92 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613043 visibilities/baseline/integration-bin. ! Found source: J0117+1418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 10152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0117+1418_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898388Jy sigma=0.010661 ! Fit after self-cal, rms=0.865647Jy sigma=0.010309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=8.231 mas, bpa=11.73 degrees ! Estimated noise=1015.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105633 Jy ! Component: 100 - total flux cleaned = 0.128785 Jy ! Total flux subtracted in 100 components = 0.128785 Jy ! Clean residual min=-0.005366 max=0.006793 Jy/beam ! Clean residual mean=-0.000010 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.128785 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.128785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073893Jy sigma=0.000808 ! Fit after self-cal, rms=0.073877Jy sigma=0.000808 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.59 mas, bmaj=9.493 mas, bpa=9.083 degrees ! Estimated noise=600.823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100499 Jy ! Component: 100 - total flux cleaned = 0.0154096 Jy ! Component: 150 - total flux cleaned = 0.0186026 Jy ! Component: 200 - total flux cleaned = 0.0205834 Jy ! Total flux subtracted in 200 components = 0.0205834 Jy ! Clean residual min=-0.002555 max=0.003686 Jy/beam ! Clean residual mean=-0.000003 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.149369 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 73 components and 0.149369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072498Jy sigma=0.000791 ! Fit after self-cal, rms=0.072484Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.01 KP 1.06 ! LA 1.19 MK 1.00* NL 0.95 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.04 KP 0.99 ! LA 1.12 MK 1.00* NL 1.04 OV 1.01 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.04 KP 0.88 ! LA 0.90 MK 1.00* NL 0.97 OV 0.93 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 0.87 ! LA 0.85 MK 1.00* NL 1.08 OV 0.96 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.072484Jy sigma=0.000791 ! Fit after self-cal, rms=0.070050Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.594 mas, bmaj=9.554 mas, bpa=9.099 degrees ! Estimated noise=596.613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147475 Jy ! Component: 100 - total flux cleaned = 3.07615e-05 Jy ! Component: 150 - total flux cleaned = 9.83602e-06 Jy ! Component: 200 - total flux cleaned = -8.53944e-06 Jy ! Total flux subtracted in 200 components = -8.53944e-06 Jy ! Clean residual min=-0.001868 max=0.002099 Jy/beam ! Clean residual mean=-0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.14936 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.14936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070035Jy sigma=0.000770 ! Fit after self-cal, rms=0.070059Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070059Jy sigma=0.000770 ! Fit after self-cal, rms=0.070059Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.586 mas, bmaj=9.561 mas, bpa=9.135 degrees ! Estimated noise=596.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.65433e-06 Jy ! Component: 100 - total flux cleaned = -2.20418e-06 Jy ! Component: 150 - total flux cleaned = 1.54613e-05 Jy ! Component: 200 - total flux cleaned = -1.15249e-06 Jy ! Total flux subtracted in 200 components = -1.15249e-06 Jy ! Clean residual min=-0.001675 max=0.001608 Jy/beam ! Clean residual mean=-0.000006 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.149359 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 0.149359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070047Jy sigma=0.000768 ! Fit after self-cal, rms=0.070048Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.9981e-05 Jy ! Component: 100 - total flux cleaned = 5.274e-06 Jy ! Component: 150 - total flux cleaned = -2.22611e-05 Jy ! Component: 200 - total flux cleaned = -3.5519e-05 Jy ! Total flux subtracted in 200 components = -3.5519e-05 Jy ! Clean residual min=-0.001621 max=0.001583 Jy/beam ! Clean residual mean=-0.000006 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.149324 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 124 components and 0.149324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070042Jy sigma=0.000768 ! Fit after self-cal, rms=0.070041Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070041Jy sigma=0.000768 ! Fit after self-cal, rms=0.069999Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.582 mas, bmaj=9.563 mas, bpa=9.174 degrees ! Estimated noise=595.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.00195e-05 Jy ! Component: 100 - total flux cleaned = -9.4045e-05 Jy ! Component: 150 - total flux cleaned = -8.10748e-05 Jy ! Component: 200 - total flux cleaned = -0.000105381 Jy ! Total flux subtracted in 200 components = -0.000105381 Jy ! Clean residual min=-0.001559 max=0.001520 Jy/beam ! Clean residual mean=-0.000006 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.149218 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 132 components and 0.149218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069993Jy sigma=0.000768 ! Fit after self-cal, rms=0.069993Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.04254e-06 Jy ! Component: 100 - total flux cleaned = -8.09153e-06 Jy ! Component: 150 - total flux cleaned = -1.84215e-05 Jy ! Component: 200 - total flux cleaned = -3.90021e-05 Jy ! Total flux subtracted in 200 components = -3.90021e-05 Jy ! Clean residual min=-0.001564 max=0.001505 Jy/beam ! Clean residual mean=-0.000006 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.149179 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 140 components and 0.149179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069990Jy sigma=0.000768 ! Fit after self-cal, rms=0.069989Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069989Jy sigma=0.000768 ! Fit after self-cal, rms=0.069966Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.242 mas, bmaj=13.34 mas, bpa=-10.73 degrees ! Estimated noise=660.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.08777e-05 Jy ! Component: 100 - total flux cleaned = 5.71908e-05 Jy ! Component: 150 - total flux cleaned = 5.73939e-05 Jy ! Component: 200 - total flux cleaned = 4.07647e-05 Jy ! Total flux subtracted in 200 components = 4.07647e-05 Jy ! Clean residual min=-0.001624 max=0.001684 Jy/beam ! Clean residual mean=-0.000010 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.14922 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 150 components and 0.14922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069964Jy sigma=0.000768 ! Fit after self-cal, rms=0.069964Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.30041e-05 Jy ! Component: 100 - total flux cleaned = 9.075e-05 Jy ! Component: 150 - total flux cleaned = 0.000105701 Jy ! Component: 200 - total flux cleaned = 0.000112574 Jy ! Total flux subtracted in 200 components = 0.000112574 Jy ! Clean residual min=-0.001625 max=0.001672 Jy/beam ! Clean residual mean=-0.000010 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.149333 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 0.149333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069963Jy sigma=0.000768 ! Fit after self-cal, rms=0.069962Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.579 mas, bmaj=9.565 mas, bpa=9.196 degrees ! Estimated noise=595.069 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.579 x 9.565 at 9.196 degrees (North through East) ! Clean map min=-0.0015785 max=0.13558 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=8.269 mas, bpa=11.7 degrees ! Estimated noise=1002.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104257 Jy ! Component: 100 - total flux cleaned = 0.127237 Jy ! Component: 150 - total flux cleaned = 0.135169 Jy ! Component: 200 - total flux cleaned = 0.139886 Jy ! Total flux subtracted in 200 components = 0.139886 Jy ! Clean residual min=-0.003250 max=0.003261 Jy/beam ! Clean residual mean=-0.000006 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.139886 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.139886 Jy ! Inverting map and beam ! Estimated beam: bmin=4.579 mas, bmaj=9.565 mas, bpa=9.196 degrees ! Estimated noise=595.069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436684 Jy ! Component: 100 - total flux cleaned = 0.00648367 Jy ! Component: 150 - total flux cleaned = 0.0077279 Jy ! Component: 200 - total flux cleaned = 0.0084673 Jy ! Total flux subtracted in 200 components = 0.0084673 Jy ! Clean residual min=-0.001620 max=0.001587 Jy/beam ! Clean residual mean=-0.000007 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.148354 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 71 components and 0.148353 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.242 mas, bmaj=13.34 mas, bpa=-10.73 degrees ! Estimated noise=660.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634413 Jy ! Component: 100 - total flux cleaned = 0.000779049 Jy ! Component: 150 - total flux cleaned = 0.000911 Jy ! Component: 200 - total flux cleaned = 0.000996774 Jy ! Total flux subtracted in 200 components = 0.000996774 Jy ! Clean residual min=-0.001595 max=0.001807 Jy/beam ! Clean residual mean=-0.000010 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.14935 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.6492e-05 Jy ! Component: 100 - total flux cleaned = 5.09117e-05 Jy ! Component: 150 - total flux cleaned = 6.2184e-05 Jy ! Component: 200 - total flux cleaned = 7.34297e-05 Jy ! Total flux subtracted in 200 components = 7.34297e-05 Jy ! Clean residual min=-0.001626 max=0.001756 Jy/beam ! Clean residual mean=-0.000010 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.149424 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 100 components and 0.149424 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.579 mas, bmaj=9.565 mas, bpa=9.196 degrees ! Estimated noise=595.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012725 Jy ! Component: 100 - total flux cleaned = -7.88591e-05 Jy ! Component: 150 - total flux cleaned = -7.82427e-05 Jy ! Component: 200 - total flux cleaned = -7.82435e-05 Jy ! Total flux subtracted in 200 components = -7.82435e-05 Jy ! Clean residual min=-0.001638 max=0.001447 Jy/beam ! Clean residual mean=-0.000006 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.149345 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 112 components and 0.149345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069965Jy sigma=0.000768 ! Fit after self-cal, rms=0.069962Jy sigma=0.000768 wmodel J0117+1418_S_2014_06_09_pus_map.mod ! Writing 112 model components to file: J0117+1418_S_2014_06_09_pus_map.mod wobs J0117+1418_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0117+1418_S_2014_06_09_pus_uvs.fits wwins J0117+1418_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J0117+1418_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184831 Jy ! Component: 100 - total flux cleaned = -0.000210704 Jy ! Component: 150 - total flux cleaned = -0.000281942 Jy ! Component: 200 - total flux cleaned = -0.000260458 Jy ! Component: 250 - total flux cleaned = -0.000302697 Jy ! Component: 300 - total flux cleaned = -0.000302951 Jy ! Component: 350 - total flux cleaned = -0.000244521 Jy ! Component: 400 - total flux cleaned = -0.000282376 Jy ! Component: 450 - total flux cleaned = -0.000300438 Jy ! Component: 500 - total flux cleaned = -0.000300286 Jy ! Component: 550 - total flux cleaned = -0.000265167 Jy ! Component: 600 - total flux cleaned = -0.000265291 Jy ! Component: 650 - total flux cleaned = -0.000231704 Jy ! Component: 700 - total flux cleaned = -0.000248326 Jy ! Component: 750 - total flux cleaned = -0.000280666 Jy ! Component: 800 - total flux cleaned = -0.000343516 Jy ! Component: 850 - total flux cleaned = -0.000389219 Jy ! Component: 900 - total flux cleaned = -0.000434412 Jy ! Component: 950 - total flux cleaned = -0.000493771 Jy ! Component: 1000 - total flux cleaned = -0.000566447 Jy ! Component: 1050 - total flux cleaned = -0.000595048 Jy ! Component: 1100 - total flux cleaned = -0.000637062 Jy ! Component: 1150 - total flux cleaned = -0.000664691 Jy ! Component: 1200 - total flux cleaned = -0.000678574 Jy ! Component: 1250 - total flux cleaned = -0.000758652 Jy ! Component: 1300 - total flux cleaned = -0.000771617 Jy ! Component: 1350 - total flux cleaned = -0.000836087 Jy ! Component: 1400 - total flux cleaned = -0.000873935 Jy ! Component: 1450 - total flux cleaned = -0.00092382 Jy ! Component: 1500 - total flux cleaned = -0.000948488 Jy ! Component: 1550 - total flux cleaned = -0.000972636 Jy ! Component: 1600 - total flux cleaned = -0.000996394 Jy ! Component: 1650 - total flux cleaned = -0.00100826 Jy ! Component: 1700 - total flux cleaned = -0.000996825 Jy ! Component: 1750 - total flux cleaned = -0.000996842 Jy ! Component: 1800 - total flux cleaned = -0.00100792 Jy ! Component: 1850 - total flux cleaned = -0.00097447 Jy ! Component: 1900 - total flux cleaned = -0.000963536 Jy ! Component: 1950 - total flux cleaned = -0.000952665 Jy ! Component: 2000 - total flux cleaned = -0.000920591 Jy ! Component: 2050 - total flux cleaned = -0.000899413 Jy ! Component: 2100 - total flux cleaned = -0.000920336 Jy ! Component: 2150 - total flux cleaned = -0.000920284 Jy ! Component: 2200 - total flux cleaned = -0.000899937 Jy ! Component: 2250 - total flux cleaned = -0.000920123 Jy ! Component: 2300 - total flux cleaned = -0.000930022 Jy ! Component: 2350 - total flux cleaned = -0.000910264 Jy ! Component: 2400 - total flux cleaned = -0.000929864 Jy ! Component: 2450 - total flux cleaned = -0.000910401 Jy ! Component: 2500 - total flux cleaned = -0.000900719 Jy ! Component: 2550 - total flux cleaned = -0.000891303 Jy ! Component: 2600 - total flux cleaned = -0.000853878 Jy ! Component: 2650 - total flux cleaned = -0.000872481 Jy ! Component: 2700 - total flux cleaned = -0.000863255 Jy ! Component: 2750 - total flux cleaned = -0.000881502 Jy ! Component: 2800 - total flux cleaned = -0.000899502 Jy ! Component: 2850 - total flux cleaned = -0.000854663 Jy ! Component: 2900 - total flux cleaned = -0.000881331 Jy ! Component: 2950 - total flux cleaned = -0.000890012 Jy ! Component: 3000 - total flux cleaned = -0.00085503 Jy ! Component: 3050 - total flux cleaned = -0.00082051 Jy ! Component: 3100 - total flux cleaned = -0.000829132 Jy ! Component: 3150 - total flux cleaned = -0.00075239 Jy ! Component: 3200 - total flux cleaned = -0.000710132 Jy ! Component: 3250 - total flux cleaned = -0.000684904 Jy ! Component: 3300 - total flux cleaned = -0.000660029 Jy ! Component: 3350 - total flux cleaned = -0.000668173 Jy ! Component: 3400 - total flux cleaned = -0.000610783 Jy ! Component: 3450 - total flux cleaned = -0.000610733 Jy ! Component: 3500 - total flux cleaned = -0.000594522 Jy ! Component: 3550 - total flux cleaned = -0.000570355 Jy ! Component: 3600 - total flux cleaned = -0.000538475 Jy ! Component: 3650 - total flux cleaned = -0.000514748 Jy ! Component: 3700 - total flux cleaned = -0.000491099 Jy ! Component: 3750 - total flux cleaned = -0.000452109 Jy ! Component: 3800 - total flux cleaned = -0.000405504 Jy ! Component: 3850 - total flux cleaned = -0.000374674 Jy ! Component: 3900 - total flux cleaned = -0.000321086 Jy ! Component: 3950 - total flux cleaned = -0.000275449 Jy ! Component: 4000 - total flux cleaned = -0.000230055 Jy ! Component: 4050 - total flux cleaned = -0.000177432 Jy ! Total flux subtracted in 4096 components = -0.000155016 Jy ! Clean residual min=-0.000445 max=0.000486 Jy/beam ! Clean residual mean=0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.14919 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 396 components and 0.14919 Jy ![Exited script file: muppet] wmap "J0117+1418_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.579 x 9.565 at 9.196 degrees (North through East) ! Clean map min=-0.0010443 max=0.13505 Jy/beam ! Writing clean map to FITS file: J0117+1418_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135055 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000138104 device "J0117+1418_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0117+1418_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.306774 0.306774 0.613549 1.2271 2.45419 4.90839 9.81678 19.6336 39.2671 78.5342 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.579 x 9.565 at 9.196 degrees (North through East) ! Clean map min=-0.0010443 max=0.13505 Jy/beam quit ! Quitting program ! Log file J0117+1418_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:40:38 2016