! Started logfile: J0110+5632_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:00:18 2017 obs J0110+5632_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0110+5632_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.796175 visibilities/baseline/integration-bin. ! Found source: J0110+5632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0110+5632_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959240Jy sigma=0.010046 ! Fit after self-cal, rms=0.923973Jy sigma=0.009754 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=5.784 mas, bpa=38.75 degrees ! Estimated noise=846.573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591083 Jy ! Component: 100 - total flux cleaned = 0.0815122 Jy ! Total flux subtracted in 100 components = 0.0815122 Jy ! Clean residual min=-0.010654 max=0.013211 Jy/beam ! Clean residual mean=-0.000198 rms=0.003160 Jy/beam ! Combined flux in latest and established models = 0.0815122 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0815122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174237Jy sigma=0.001209 ! Fit after self-cal, rms=0.174209Jy sigma=0.001207 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=6.314 mas, bpa=39.22 degrees ! Estimated noise=546.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234844 Jy ! Component: 100 - total flux cleaned = 0.0362039 Jy ! Component: 150 - total flux cleaned = 0.0441976 Jy ! Component: 200 - total flux cleaned = 0.0494303 Jy ! Total flux subtracted in 200 components = 0.0494303 Jy ! Clean residual min=-0.017236 max=0.022094 Jy/beam ! Clean residual mean=-0.000513 rms=0.006713 Jy/beam ! Combined flux in latest and established models = 0.130942 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 52 components and 0.130943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171054Jy sigma=0.001157 ! Fit after self-cal, rms=0.170935Jy sigma=0.001155 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.14 HN 1.02 KP 1.70 ! LA 0.70 MK 1.30 NL 1.09 OV 1.10 ! PT 0.66 SC 1.07 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.24 HN 1.14 KP 1.60 ! LA 0.69 MK 1.26 NL 1.05 OV 1.12 ! PT 0.71 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.31 HN 1.13 KP 1.49 ! LA 0.55 MK 1.28 NL 1.30 OV 1.06 ! PT 0.66 SC 1.12 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.03 KP 1.33 ! LA 0.61 MK 1.24 NL 1.12 OV 1.05 ! PT 0.77 SC 1.12 ! ! ! Fit before self-cal, rms=0.170935Jy sigma=0.001155 ! Fit after self-cal, rms=0.197012Jy sigma=0.001115 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=6.542 mas, bpa=38.98 degrees ! Estimated noise=565.061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105068 Jy ! Component: 100 - total flux cleaned = -0.000763364 Jy ! Component: 150 - total flux cleaned = -0.000830868 Jy ! Component: 200 - total flux cleaned = -0.000951825 Jy ! Total flux subtracted in 200 components = -0.000951825 Jy ! Clean residual min=-0.014909 max=0.024045 Jy/beam ! Clean residual mean=-0.000308 rms=0.006266 Jy/beam ! Combined flux in latest and established models = 0.129991 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.129991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196848Jy sigma=0.001115 ! Fit after self-cal, rms=0.198751Jy sigma=0.001102 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198751Jy sigma=0.001102 ! Fit after self-cal, rms=0.576651Jy sigma=0.001033 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.247 mas, bmaj=6.199 mas, bpa=39.76 degrees ! Estimated noise=664.559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718523 Jy ! Component: 100 - total flux cleaned = 0.00696216 Jy ! Component: 150 - total flux cleaned = 0.00679874 Jy ! Component: 200 - total flux cleaned = 0.00680914 Jy ! Total flux subtracted in 200 components = 0.00680914 Jy ! Clean residual min=-0.014565 max=0.029888 Jy/beam ! Clean residual mean=-0.000056 rms=0.005488 Jy/beam ! Combined flux in latest and established models = 0.1368 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.1368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.575018Jy sigma=0.001039 ! Fit after self-cal, rms=0.585464Jy sigma=0.001030 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-82.5, -55.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240602 Jy ! Component: 100 - total flux cleaned = 0.0356624 Jy ! Component: 150 - total flux cleaned = 0.0388878 Jy ! Component: 200 - total flux cleaned = 0.0407149 Jy ! Total flux subtracted in 200 components = 0.0407149 Jy ! Clean residual min=-0.012486 max=0.017590 Jy/beam ! Clean residual mean=-0.000263 rms=0.003747 Jy/beam ! Combined flux in latest and established models = 0.177515 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 112 components and 0.177515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.583432Jy sigma=0.000994 ! Fit after self-cal, rms=0.584587Jy sigma=0.000978 ! Inverting map ! Added new window around map position (9, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211907 Jy ! Component: 100 - total flux cleaned = 0.0298801 Jy ! Component: 150 - total flux cleaned = 0.035004 Jy ! Component: 200 - total flux cleaned = 0.038748 Jy ! Total flux subtracted in 200 components = 0.038748 Jy ! Clean residual min=-0.012989 max=0.015952 Jy/beam ! Clean residual mean=-0.000161 rms=0.003798 Jy/beam ! Combined flux in latest and established models = 0.216263 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 149 components and 0.216263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.581275Jy sigma=0.000950 ! Fit after self-cal, rms=0.581060Jy sigma=0.000941 ! Inverting map ! Added new window around map position (23, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013195 Jy ! Component: 100 - total flux cleaned = 0.0199702 Jy ! Component: 150 - total flux cleaned = 0.0247624 Jy ! Component: 200 - total flux cleaned = 0.0280582 Jy ! Total flux subtracted in 200 components = 0.0280582 Jy ! Clean residual min=-0.013615 max=0.016061 Jy/beam ! Clean residual mean=-0.000068 rms=0.004032 Jy/beam ! Combined flux in latest and established models = 0.244321 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 194 components and 0.244321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577822Jy sigma=0.000938 ! Fit after self-cal, rms=0.576606Jy sigma=0.000934 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.576606Jy sigma=0.000934 ! Fit after self-cal, rms=0.370516Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.229 mas, bmaj=6.397 mas, bpa=39.88 degrees ! Estimated noise=630.705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022888 Jy ! Component: 100 - total flux cleaned = 0.00360367 Jy ! Component: 150 - total flux cleaned = 0.00441349 Jy ! Component: 200 - total flux cleaned = 0.00489547 Jy ! Total flux subtracted in 200 components = 0.00489547 Jy ! Clean residual min=-0.012126 max=0.014069 Jy/beam ! Clean residual mean=-0.000110 rms=0.003461 Jy/beam ! Combined flux in latest and established models = 0.249216 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 212 components and 0.249216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369136Jy sigma=0.000902 ! Fit after self-cal, rms=0.366788Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.16858e-05 Jy ! Component: 100 - total flux cleaned = 0.00150644 Jy ! Component: 150 - total flux cleaned = 0.00244026 Jy ! Component: 200 - total flux cleaned = 0.00353417 Jy ! Total flux subtracted in 200 components = 0.00353417 Jy ! Clean residual min=-0.012881 max=0.014686 Jy/beam ! Clean residual mean=-0.000091 rms=0.003592 Jy/beam ! Combined flux in latest and established models = 0.252751 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 225 components and 0.252751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365757Jy sigma=0.000899 ! Fit after self-cal, rms=0.365545Jy sigma=0.000899 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365545Jy sigma=0.000899 ! Fit after self-cal, rms=0.318943Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.349 mas, bmaj=8.862 mas, bpa=43.89 degrees ! Estimated noise=686.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133188 Jy ! Component: 100 - total flux cleaned = -0.00166866 Jy ! Component: 150 - total flux cleaned = -0.00195585 Jy ! Component: 200 - total flux cleaned = -0.00169106 Jy ! Total flux subtracted in 200 components = -0.00169106 Jy ! Clean residual min=-0.017821 max=0.017238 Jy/beam ! Clean residual mean=-0.000214 rms=0.005136 Jy/beam ! Combined flux in latest and established models = 0.25106 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 244 components and 0.25106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318064Jy sigma=0.000896 ! Fit after self-cal, rms=0.317240Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518362 Jy ! Component: 100 - total flux cleaned = -4.17212e-05 Jy ! Component: 150 - total flux cleaned = 0.000410009 Jy ! Component: 200 - total flux cleaned = 0.000826556 Jy ! Total flux subtracted in 200 components = 0.000826556 Jy ! Clean residual min=-0.018455 max=0.017617 Jy/beam ! Clean residual mean=-0.000200 rms=0.005094 Jy/beam ! Combined flux in latest and established models = 0.251886 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 256 components and 0.251886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316734Jy sigma=0.000896 ! Fit after self-cal, rms=0.316591Jy sigma=0.000895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=6.523 mas, bpa=40.26 degrees ! Estimated noise=613.471 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.23 x 6.523 at 40.26 degrees (North through East) ! Clean map min=-0.021946 max=0.10634 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=5.77 mas, bpa=39.79 degrees ! Estimated noise=1072.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636939 Jy ! Component: 100 - total flux cleaned = 0.0958182 Jy ! Component: 150 - total flux cleaned = 0.120614 Jy ! Component: 200 - total flux cleaned = 0.139547 Jy ! Total flux subtracted in 200 components = 0.139547 Jy ! Clean residual min=-0.014594 max=0.015613 Jy/beam ! Clean residual mean=-0.000125 rms=0.003783 Jy/beam ! Combined flux in latest and established models = 0.139547 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.139547 Jy ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=6.523 mas, bpa=40.26 degrees ! Estimated noise=613.471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023172 Jy ! Component: 100 - total flux cleaned = 0.0365522 Jy ! Component: 150 - total flux cleaned = 0.0475216 Jy ! Component: 200 - total flux cleaned = 0.0566102 Jy ! Total flux subtracted in 200 components = 0.0566102 Jy ! Clean residual min=-0.013724 max=0.017164 Jy/beam ! Clean residual mean=-0.000201 rms=0.004414 Jy/beam ! Combined flux in latest and established models = 0.196157 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 72 components and 0.196157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.349 mas, bmaj=8.862 mas, bpa=43.89 degrees ! Estimated noise=686.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111831 Jy ! Component: 100 - total flux cleaned = 0.0207504 Jy ! Component: 150 - total flux cleaned = 0.0288254 Jy ! Component: 200 - total flux cleaned = 0.034389 Jy ! Total flux subtracted in 200 components = 0.034389 Jy ! Clean residual min=-0.020583 max=0.020567 Jy/beam ! Clean residual mean=-0.000277 rms=0.005773 Jy/beam ! Combined flux in latest and established models = 0.230546 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448904 Jy ! Component: 100 - total flux cleaned = 0.0070636 Jy ! Component: 150 - total flux cleaned = 0.00908211 Jy ! Component: 200 - total flux cleaned = 0.0109199 Jy ! Total flux subtracted in 200 components = 0.0109199 Jy ! Clean residual min=-0.019390 max=0.019916 Jy/beam ! Clean residual mean=-0.000258 rms=0.005427 Jy/beam ! Combined flux in latest and established models = 0.241466 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 125 components and 0.241466 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=6.523 mas, bpa=40.26 degrees ! Estimated noise=613.471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309264 Jy ! Component: 100 - total flux cleaned = 0.00464936 Jy ! Component: 150 - total flux cleaned = 0.00662126 Jy ! Component: 200 - total flux cleaned = 0.00841588 Jy ! Total flux subtracted in 200 components = 0.00841588 Jy ! Clean residual min=-0.013894 max=0.015146 Jy/beam ! Clean residual mean=-0.000094 rms=0.003508 Jy/beam ! Combined flux in latest and established models = 0.249882 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 151 components and 0.249882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317517Jy sigma=0.000905 ! Fit after self-cal, rms=0.317245Jy sigma=0.000900 wmodel J0110+5632_S_2015_01_23_pus_map.mod ! Writing 151 model components to file: J0110+5632_S_2015_01_23_pus_map.mod wobs J0110+5632_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0110+5632_S_2015_01_23_pus_uvs.fits wwins J0110+5632_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0110+5632_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000400455 Jy ! Component: 100 - total flux cleaned = -0.000627849 Jy ! Component: 150 - total flux cleaned = -0.000224333 Jy ! Component: 200 - total flux cleaned = 0.000931785 Jy ! Component: 250 - total flux cleaned = 0.00202791 Jy ! Component: 300 - total flux cleaned = 0.0027296 Jy ! Component: 350 - total flux cleaned = 0.00425076 Jy ! Component: 400 - total flux cleaned = 0.00588134 Jy ! Component: 450 - total flux cleaned = 0.00714687 Jy ! Component: 500 - total flux cleaned = 0.00791639 Jy ! Component: 550 - total flux cleaned = 0.00866567 Jy ! Component: 600 - total flux cleaned = 0.00940072 Jy ! Component: 650 - total flux cleaned = 0.0101184 Jy ! Component: 700 - total flux cleaned = 0.0108222 Jy ! Component: 750 - total flux cleaned = 0.0113732 Jy ! Component: 800 - total flux cleaned = 0.0119174 Jy ! Component: 850 - total flux cleaned = 0.0124524 Jy ! Component: 900 - total flux cleaned = 0.0131064 Jy ! Component: 950 - total flux cleaned = 0.0136216 Jy ! Component: 1000 - total flux cleaned = 0.0141278 Jy ! Component: 1050 - total flux cleaned = 0.0146239 Jy ! Component: 1100 - total flux cleaned = 0.0147459 Jy ! Component: 1150 - total flux cleaned = 0.0149875 Jy ! Component: 1200 - total flux cleaned = 0.0153449 Jy ! Component: 1250 - total flux cleaned = 0.0159307 Jy ! Component: 1300 - total flux cleaned = 0.0160457 Jy ! Component: 1350 - total flux cleaned = 0.0165019 Jy ! Component: 1400 - total flux cleaned = 0.016614 Jy ! Component: 1450 - total flux cleaned = 0.0169468 Jy ! Component: 1500 - total flux cleaned = 0.0172758 Jy ! Component: 1550 - total flux cleaned = 0.017277 Jy ! Component: 1600 - total flux cleaned = 0.017811 Jy ! Component: 1650 - total flux cleaned = 0.017811 Jy ! Component: 1700 - total flux cleaned = 0.0181225 Jy ! Component: 1750 - total flux cleaned = 0.018225 Jy ! Component: 1800 - total flux cleaned = 0.0186316 Jy ! Component: 1850 - total flux cleaned = 0.0188319 Jy ! Component: 1900 - total flux cleaned = 0.0193276 Jy ! Component: 1950 - total flux cleaned = 0.0195238 Jy ! Component: 2000 - total flux cleaned = 0.0198145 Jy ! Component: 2050 - total flux cleaned = 0.020006 Jy ! Component: 2100 - total flux cleaned = 0.0203865 Jy ! Component: 2150 - total flux cleaned = 0.0205746 Jy ! Component: 2200 - total flux cleaned = 0.0209471 Jy ! Component: 2250 - total flux cleaned = 0.0211307 Jy ! Component: 2300 - total flux cleaned = 0.0214955 Jy ! Component: 2350 - total flux cleaned = 0.0218561 Jy ! Component: 2400 - total flux cleaned = 0.022035 Jy ! Component: 2450 - total flux cleaned = 0.0224764 Jy ! Component: 2500 - total flux cleaned = 0.0228259 Jy ! Component: 2550 - total flux cleaned = 0.0231712 Jy ! Component: 2600 - total flux cleaned = 0.0234282 Jy ! Component: 2650 - total flux cleaned = 0.0237673 Jy ! Component: 2700 - total flux cleaned = 0.0242716 Jy ! Component: 2750 - total flux cleaned = 0.0245208 Jy ! Component: 2800 - total flux cleaned = 0.0249323 Jy ! Component: 2850 - total flux cleaned = 0.0250954 Jy ! Component: 2900 - total flux cleaned = 0.0253384 Jy ! Component: 2950 - total flux cleaned = 0.0258191 Jy ! Component: 3000 - total flux cleaned = 0.0261369 Jy ! Component: 3050 - total flux cleaned = 0.0263726 Jy ! Component: 3100 - total flux cleaned = 0.0267618 Jy ! Component: 3150 - total flux cleaned = 0.0269935 Jy ! Component: 3200 - total flux cleaned = 0.0273764 Jy ! Component: 3250 - total flux cleaned = 0.0276799 Jy ! Component: 3300 - total flux cleaned = 0.02798 Jy ! Component: 3350 - total flux cleaned = 0.0282775 Jy ! Component: 3400 - total flux cleaned = 0.0286463 Jy ! Component: 3450 - total flux cleaned = 0.0288659 Jy ! Component: 3500 - total flux cleaned = 0.0292287 Jy ! Component: 3550 - total flux cleaned = 0.0293722 Jy ! Component: 3600 - total flux cleaned = 0.0296579 Jy ! Component: 3650 - total flux cleaned = 0.0300113 Jy ! Component: 3700 - total flux cleaned = 0.0302209 Jy ! Component: 3750 - total flux cleaned = 0.0304301 Jy ! Component: 3800 - total flux cleaned = 0.0307064 Jy ! Component: 3850 - total flux cleaned = 0.0311172 Jy ! Component: 3900 - total flux cleaned = 0.0313875 Jy ! Component: 3950 - total flux cleaned = 0.0315893 Jy ! Component: 4000 - total flux cleaned = 0.0317897 Jy ! Component: 4050 - total flux cleaned = 0.0319877 Jy ! Total flux subtracted in 4096 components = 0.0322509 Jy ! Clean residual min=-0.003265 max=0.004103 Jy/beam ! Clean residual mean=-0.000010 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.282132 Jy keep ! Adding 350 model components to the UV plane model. ! The established model now contains 500 components and 0.282132 Jy ![Exited script file: muppet] wmap "J0110+5632_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.23 x 6.523 at 40.26 degrees (North through East) ! Clean map min=-0.022176 max=0.10277 Jy/beam ! Writing clean map to FITS file: J0110+5632_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102766 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133209 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.88871 3.88871 7.77742 15.5548 31.1097 62.2194 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.23 x 6.523 at 40.26 degrees (North through East) ! Clean map min=-0.022176 max=0.10277 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0110+5632_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:00:24 2017