! Started logfile: J0109+6133_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:13:28 2017 obs J0109+6133_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0109+6133_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0109+6133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0109+6133_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.854158Jy sigma=0.012001 ! Fit after self-cal, rms=0.832522Jy sigma=0.011714 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=9.44 mas, bpa=88.34 degrees ! Estimated noise=1158.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126103 Jy ! Component: 100 - total flux cleaned = 0.158081 Jy ! Total flux subtracted in 100 components = 0.158081 Jy ! Clean residual min=-0.008691 max=0.013444 Jy/beam ! Clean residual mean=-0.000001 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 0.158081 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.158081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086714Jy sigma=0.001001 ! Fit after self-cal, rms=0.086754Jy sigma=0.001000 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=10.7 mas, bpa=89.53 degrees ! Estimated noise=748.907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186021 Jy ! Component: 100 - total flux cleaned = 0.0272192 Jy ! Component: 150 - total flux cleaned = 0.0325383 Jy ! Component: 200 - total flux cleaned = 0.0361815 Jy ! Total flux subtracted in 200 components = 0.0361815 Jy ! Clean residual min=-0.005642 max=0.005786 Jy/beam ! Clean residual mean=0.000007 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.194263 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 50 components and 0.194263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082146Jy sigma=0.000953 ! Fit after self-cal, rms=0.082141Jy sigma=0.000952 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.01 ! MK 1.06 NL 0.95 OV 0.95 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.96 ! MK 1.03 NL 1.02 OV 0.99 PT 0.99 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.81 ! MK 1.02 NL 0.97 OV 0.92 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.85 ! MK 1.03 NL 1.05 OV 0.97 PT 0.97 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.082141Jy sigma=0.000952 ! Fit after self-cal, rms=0.078319Jy sigma=0.000915 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=10.7 mas, bpa=89.5 degrees ! Estimated noise=748.579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000783631 Jy ! Component: 100 - total flux cleaned = -0.00101001 Jy ! Component: 150 - total flux cleaned = -0.00125161 Jy ! Component: 200 - total flux cleaned = -0.00138666 Jy ! Total flux subtracted in 200 components = -0.00138666 Jy ! Clean residual min=-0.003222 max=0.002778 Jy/beam ! Clean residual mean=0.000001 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.192876 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.192876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078255Jy sigma=0.000914 ! Fit after self-cal, rms=0.077887Jy sigma=0.000914 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077887Jy sigma=0.000914 ! Fit after self-cal, rms=0.078051Jy sigma=0.000912 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=10.68 mas, bpa=89.57 degrees ! Estimated noise=747.778 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120754 Jy ! Component: 100 - total flux cleaned = -0.00155126 Jy ! Component: 150 - total flux cleaned = -0.00167993 Jy ! Component: 200 - total flux cleaned = -0.00178883 Jy ! Total flux subtracted in 200 components = -0.00178883 Jy ! Clean residual min=-0.002582 max=0.002371 Jy/beam ! Clean residual mean=0.000000 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.191087 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.191087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078000Jy sigma=0.000912 ! Fit after self-cal, rms=0.078045Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285188 Jy ! Component: 100 - total flux cleaned = -0.000353931 Jy ! Component: 150 - total flux cleaned = -0.000435002 Jy ! Component: 200 - total flux cleaned = -0.000524524 Jy ! Total flux subtracted in 200 components = -0.000524524 Jy ! Clean residual min=-0.002483 max=0.002343 Jy/beam ! Clean residual mean=0.000000 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.190563 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.190563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078024Jy sigma=0.000911 ! Fit after self-cal, rms=0.078038Jy sigma=0.000911 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078038Jy sigma=0.000911 ! Fit after self-cal, rms=0.078004Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=10.67 mas, bpa=89.56 degrees ! Estimated noise=748.236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000385421 Jy ! Component: 100 - total flux cleaned = -0.000606313 Jy ! Component: 150 - total flux cleaned = -0.000772539 Jy ! Component: 200 - total flux cleaned = -0.000882925 Jy ! Total flux subtracted in 200 components = -0.000882925 Jy ! Clean residual min=-0.002410 max=0.002340 Jy/beam ! Clean residual mean=0.000000 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.18968 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.18968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077982Jy sigma=0.000911 ! Fit after self-cal, rms=0.077986Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125629 Jy ! Component: 100 - total flux cleaned = -0.000206937 Jy ! Component: 150 - total flux cleaned = -0.000265739 Jy ! Component: 200 - total flux cleaned = -0.000346962 Jy ! Total flux subtracted in 200 components = -0.000346962 Jy ! Clean residual min=-0.002367 max=0.002332 Jy/beam ! Clean residual mean=0.000000 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.189333 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.189333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077974Jy sigma=0.000911 ! Fit after self-cal, rms=0.077984Jy sigma=0.000911 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077984Jy sigma=0.000911 ! Fit after self-cal, rms=0.077902Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.348 mas, bmaj=13.21 mas, bpa=88.32 degrees ! Estimated noise=840.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000693526 Jy ! Component: 100 - total flux cleaned = -0.000784852 Jy ! Component: 150 - total flux cleaned = -0.000811339 Jy ! Component: 200 - total flux cleaned = -0.000835151 Jy ! Total flux subtracted in 200 components = -0.000835151 Jy ! Clean residual min=-0.002211 max=0.002270 Jy/beam ! Clean residual mean=-0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.188498 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.188498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077898Jy sigma=0.000911 ! Fit after self-cal, rms=0.077893Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.43073e-05 Jy ! Component: 100 - total flux cleaned = -6.43349e-05 Jy ! Component: 150 - total flux cleaned = -8.90594e-05 Jy ! Component: 200 - total flux cleaned = -0.000104556 Jy ! Total flux subtracted in 200 components = -0.000104556 Jy ! Clean residual min=-0.002167 max=0.002280 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.188393 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 80 components and 0.188393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077896Jy sigma=0.000911 ! Fit after self-cal, rms=0.077897Jy sigma=0.000911 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=10.67 mas, bpa=89.52 degrees ! Estimated noise=748.802 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.283 x 10.67 at 89.52 degrees (North through East) ! Clean map min=-0.0020729 max=0.16771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=9.32 mas, bpa=88.27 degrees ! Estimated noise=1160.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12619 Jy ! Component: 100 - total flux cleaned = 0.158578 Jy ! Component: 150 - total flux cleaned = 0.173331 Jy ! Component: 200 - total flux cleaned = 0.181099 Jy ! Total flux subtracted in 200 components = 0.181099 Jy ! Clean residual min=-0.004893 max=0.004747 Jy/beam ! Clean residual mean=-0.000001 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.181099 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.181099 Jy ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=10.67 mas, bpa=89.52 degrees ! Estimated noise=748.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514964 Jy ! Component: 100 - total flux cleaned = 0.0066962 Jy ! Component: 150 - total flux cleaned = 0.00718497 Jy ! Component: 200 - total flux cleaned = 0.00709268 Jy ! Total flux subtracted in 200 components = 0.00709268 Jy ! Clean residual min=-0.002584 max=0.002308 Jy/beam ! Clean residual mean=-0.000000 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.188191 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 42 components and 0.188191 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.348 mas, bmaj=13.21 mas, bpa=88.32 degrees ! Estimated noise=840.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639825 Jy ! Component: 100 - total flux cleaned = 0.000713881 Jy ! Component: 150 - total flux cleaned = 0.000714485 Jy ! Component: 200 - total flux cleaned = 0.000685946 Jy ! Total flux subtracted in 200 components = 0.000685946 Jy ! Clean residual min=-0.002309 max=0.002414 Jy/beam ! Clean residual mean=-0.000001 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.188877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.08103e-05 Jy ! Component: 100 - total flux cleaned = -6.68167e-05 Jy ! Component: 150 - total flux cleaned = -9.2431e-05 Jy ! Component: 200 - total flux cleaned = -0.000117477 Jy ! Total flux subtracted in 200 components = -0.000117477 Jy ! Clean residual min=-0.002282 max=0.002382 Jy/beam ! Clean residual mean=-0.000001 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.18876 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.18876 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=10.67 mas, bpa=89.52 degrees ! Estimated noise=748.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.27271e-05 Jy ! Component: 100 - total flux cleaned = -0.000162998 Jy ! Component: 150 - total flux cleaned = -0.000282212 Jy ! Component: 200 - total flux cleaned = -0.000389697 Jy ! Total flux subtracted in 200 components = -0.000389697 Jy ! Clean residual min=-0.002504 max=0.002375 Jy/beam ! Clean residual mean=-0.000000 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.18837 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.18837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077905Jy sigma=0.000911 ! Fit after self-cal, rms=0.077910Jy sigma=0.000911 wmodel J0109+6133_S_2014_01_04_pus_map.mod ! Writing 59 model components to file: J0109+6133_S_2014_01_04_pus_map.mod wobs J0109+6133_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0109+6133_S_2014_01_04_pus_uvs.fits wwins J0109+6133_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0109+6133_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312064 Jy ! Component: 100 - total flux cleaned = -0.000352664 Jy ! Component: 150 - total flux cleaned = -7.58295e-05 Jy ! Component: 200 - total flux cleaned = -0.000107369 Jy ! Component: 250 - total flux cleaned = -0.000137846 Jy ! Component: 300 - total flux cleaned = -0.000226245 Jy ! Component: 350 - total flux cleaned = -0.000310791 Jy ! Component: 400 - total flux cleaned = -0.000336869 Jy ! Component: 450 - total flux cleaned = -0.000310325 Jy ! Component: 500 - total flux cleaned = -0.000361051 Jy ! Component: 550 - total flux cleaned = -0.000312451 Jy ! Component: 600 - total flux cleaned = -0.00021749 Jy ! Component: 650 - total flux cleaned = -0.000102843 Jy ! Component: 700 - total flux cleaned = -8.05722e-05 Jy ! Component: 750 - total flux cleaned = 7.35802e-06 Jy ! Component: 800 - total flux cleaned = 7.12994e-05 Jy ! Component: 850 - total flux cleaned = 2.90248e-05 Jy ! Component: 900 - total flux cleaned = 2.92742e-05 Jy ! Component: 950 - total flux cleaned = 6.9629e-05 Jy ! Component: 1000 - total flux cleaned = 0.000148455 Jy ! Component: 1050 - total flux cleaned = 0.000226055 Jy ! Component: 1100 - total flux cleaned = 0.000339655 Jy ! Component: 1150 - total flux cleaned = 0.000432599 Jy ! Component: 1200 - total flux cleaned = 0.000505075 Jy ! Component: 1250 - total flux cleaned = 0.000594736 Jy ! Component: 1300 - total flux cleaned = 0.000718322 Jy ! Component: 1350 - total flux cleaned = 0.000788065 Jy ! Component: 1400 - total flux cleaned = 0.000890826 Jy ! Component: 1450 - total flux cleaned = 0.000975185 Jy ! Component: 1500 - total flux cleaned = 0.00105816 Jy ! Component: 1550 - total flux cleaned = 0.00105837 Jy ! Component: 1600 - total flux cleaned = 0.00117138 Jy ! Component: 1650 - total flux cleaned = 0.00125096 Jy ! Component: 1700 - total flux cleaned = 0.00128236 Jy ! Component: 1750 - total flux cleaned = 0.0014064 Jy ! Component: 1800 - total flux cleaned = 0.00148297 Jy ! Component: 1850 - total flux cleaned = 0.00154334 Jy ! Component: 1900 - total flux cleaned = 0.00161822 Jy ! Component: 1950 - total flux cleaned = 0.00166247 Jy ! Component: 2000 - total flux cleaned = 0.00180849 Jy ! Component: 2050 - total flux cleaned = 0.00182279 Jy ! Component: 2100 - total flux cleaned = 0.00185134 Jy ! Component: 2150 - total flux cleaned = 0.00185135 Jy ! Component: 2200 - total flux cleaned = 0.00193561 Jy ! Component: 2250 - total flux cleaned = 0.00197723 Jy ! Component: 2300 - total flux cleaned = 0.00203229 Jy ! Component: 2350 - total flux cleaned = 0.00203226 Jy ! Component: 2400 - total flux cleaned = 0.00207294 Jy ! Component: 2450 - total flux cleaned = 0.00208632 Jy ! Component: 2500 - total flux cleaned = 0.00209978 Jy ! Component: 2550 - total flux cleaned = 0.00216591 Jy ! Component: 2600 - total flux cleaned = 0.00215271 Jy ! Component: 2650 - total flux cleaned = 0.0022308 Jy ! Component: 2700 - total flux cleaned = 0.00224367 Jy ! Component: 2750 - total flux cleaned = 0.0022693 Jy ! Component: 2800 - total flux cleaned = 0.00228213 Jy ! Component: 2850 - total flux cleaned = 0.0023583 Jy ! Component: 2900 - total flux cleaned = 0.00238358 Jy ! Component: 2950 - total flux cleaned = 0.00245865 Jy ! Component: 3000 - total flux cleaned = 0.00245879 Jy ! Component: 3050 - total flux cleaned = 0.00257036 Jy ! Component: 3100 - total flux cleaned = 0.00259501 Jy ! Component: 3150 - total flux cleaned = 0.00263182 Jy ! Component: 3200 - total flux cleaned = 0.00268068 Jy ! Component: 3250 - total flux cleaned = 0.00268063 Jy ! Component: 3300 - total flux cleaned = 0.00274123 Jy ! Component: 3350 - total flux cleaned = 0.00275333 Jy ! Component: 3400 - total flux cleaned = 0.00277739 Jy ! Component: 3450 - total flux cleaned = 0.00281336 Jy ! Component: 3500 - total flux cleaned = 0.00281341 Jy ! Component: 3550 - total flux cleaned = 0.00284906 Jy ! Component: 3600 - total flux cleaned = 0.00286086 Jy ! Component: 3650 - total flux cleaned = 0.00286085 Jy ! Component: 3700 - total flux cleaned = 0.00286092 Jy ! Component: 3750 - total flux cleaned = 0.00288442 Jy ! Component: 3800 - total flux cleaned = 0.00289624 Jy ! Component: 3850 - total flux cleaned = 0.00294285 Jy ! Component: 3900 - total flux cleaned = 0.00296609 Jy ! Component: 3950 - total flux cleaned = 0.00298933 Jy ! Component: 4000 - total flux cleaned = 0.00300086 Jy ! Component: 4050 - total flux cleaned = 0.00302405 Jy ! Total flux subtracted in 4096 components = 0.00307029 Jy ! Clean residual min=-0.000838 max=0.000673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.191441 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 303 components and 0.19144 Jy ![Exited script file: muppet] wmap "J0109+6133_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.283 x 10.67 at 89.52 degrees (North through East) ! Clean map min=-0.0013636 max=0.16809 Jy/beam ! Writing clean map to FITS file: J0109+6133_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168088 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189373 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.337987 0.337987 0.675975 1.35195 2.7039 5.4078 10.8156 21.6312 43.2624 86.5247 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.283 x 10.67 at 89.52 degrees (North through East) ! Clean map min=-0.0013636 max=0.16809 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0109+6133_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:13:32 2017