! Started logfile: J0107+2611_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:11:19 2016 obs J0107+2611_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0107+2611_S_2014_08_05_pus_uva.fits ! AN table 1: 102 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774074 visibilities/baseline/integration-bin. ! Found source: J0107+2611 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 14212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0107+2611_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.976532Jy sigma=0.012026 ! Fit after self-cal, rms=0.955851Jy sigma=0.011820 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=7.511 mas, bpa=14.55 degrees ! Estimated noise=677.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352818 Jy ! Component: 100 - total flux cleaned = 0.0442648 Jy ! Total flux subtracted in 100 components = 0.0442648 Jy ! Clean residual min=-0.002397 max=0.003510 Jy/beam ! Clean residual mean=0.000001 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0442648 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0442648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067372Jy sigma=0.000759 ! Fit after self-cal, rms=0.067235Jy sigma=0.000757 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.543 mas, bmaj=8.18 mas, bpa=13.85 degrees ! Estimated noise=490.386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383512 Jy ! Component: 100 - total flux cleaned = 0.00563048 Jy ! Component: 150 - total flux cleaned = 0.00660377 Jy ! Component: 200 - total flux cleaned = 0.00716657 Jy ! Total flux subtracted in 200 components = 0.00716657 Jy ! Clean residual min=-0.001857 max=0.001685 Jy/beam ! Clean residual mean=0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0514314 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0514314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066996Jy sigma=0.000755 ! Fit after self-cal, rms=0.066994Jy sigma=0.000755 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 0.98 KP 1.06 ! LA 1.04 MK 1.00* NL 0.95 OV 0.98 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.12 HN 1.06 KP 1.00 ! LA 1.01 MK 1.00* NL 1.10 OV 1.04 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.25 HN 1.00 KP 0.92 ! LA 0.81 MK 1.00* NL 0.96 OV 0.98 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 1.06 KP 0.86 ! LA 0.78 MK 1.00* NL 1.00 OV 0.96 ! PT 1.08 SC 0.95 ! ! ! Fit before self-cal, rms=0.066994Jy sigma=0.000755 ! Fit after self-cal, rms=0.066040Jy sigma=0.000752 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.517 mas, bmaj=8.216 mas, bpa=14.06 degrees ! Estimated noise=491.142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43134e-05 Jy ! Component: 100 - total flux cleaned = -3.29958e-07 Jy ! Component: 150 - total flux cleaned = 8.21252e-07 Jy ! Component: 200 - total flux cleaned = 7.5356e-07 Jy ! Total flux subtracted in 200 components = 7.5356e-07 Jy ! Clean residual min=-0.001473 max=0.001477 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0514321 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.0514321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066027Jy sigma=0.000752 ! Fit after self-cal, rms=0.066023Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066023Jy sigma=0.000751 ! Fit after self-cal, rms=0.067754Jy sigma=0.000750 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.54 mas, bmaj=8.251 mas, bpa=13.46 degrees ! Estimated noise=497.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221215 Jy ! Component: 100 - total flux cleaned = 0.000329253 Jy ! Component: 150 - total flux cleaned = 0.000423689 Jy ! Component: 200 - total flux cleaned = 0.00046362 Jy ! Total flux subtracted in 200 components = 0.00046362 Jy ! Clean residual min=-0.001544 max=0.001417 Jy/beam ! Clean residual mean=-0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0518957 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0518957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067744Jy sigma=0.000750 ! Fit after self-cal, rms=0.067791Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.08977e-05 Jy ! Component: 100 - total flux cleaned = -2.9299e-05 Jy ! Component: 150 - total flux cleaned = -2.95176e-05 Jy ! Component: 200 - total flux cleaned = -2.26959e-05 Jy ! Total flux subtracted in 200 components = -2.26959e-05 Jy ! Clean residual min=-0.001495 max=0.001407 Jy/beam ! Clean residual mean=-0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0518731 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0518731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067788Jy sigma=0.000750 ! Fit after self-cal, rms=0.067787Jy sigma=0.000750 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067787Jy sigma=0.000750 ! Fit after self-cal, rms=0.068578Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.532 mas, bmaj=8.251 mas, bpa=13.48 degrees ! Estimated noise=501.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349345 Jy ! Component: 100 - total flux cleaned = 0.000429715 Jy ! Component: 150 - total flux cleaned = 0.000468326 Jy ! Component: 200 - total flux cleaned = 0.000475141 Jy ! Total flux subtracted in 200 components = 0.000475141 Jy ! Clean residual min=-0.001523 max=0.001434 Jy/beam ! Clean residual mean=-0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0523482 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.0523482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068572Jy sigma=0.000750 ! Fit after self-cal, rms=0.068580Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.02571e-06 Jy ! Component: 100 - total flux cleaned = -1.935e-05 Jy ! Component: 150 - total flux cleaned = -1.27879e-05 Jy ! Component: 200 - total flux cleaned = -1.2812e-05 Jy ! Total flux subtracted in 200 components = -1.2812e-05 Jy ! Clean residual min=-0.001517 max=0.001426 Jy/beam ! Clean residual mean=-0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0523354 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.0523354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068578Jy sigma=0.000750 ! Fit after self-cal, rms=0.068577Jy sigma=0.000750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068577Jy sigma=0.000750 ! Fit after self-cal, rms=0.069109Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=10.14 mas, bpa=-1.528 degrees ! Estimated noise=571.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427553 Jy ! Component: 100 - total flux cleaned = 0.000468879 Jy ! Component: 150 - total flux cleaned = 0.000495189 Jy ! Component: 200 - total flux cleaned = 0.00048981 Jy ! Total flux subtracted in 200 components = 0.00048981 Jy ! Clean residual min=-0.001853 max=0.001332 Jy/beam ! Clean residual mean=-0.000004 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0528252 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.0528252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069106Jy sigma=0.000750 ! Fit after self-cal, rms=0.069104Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6869e-05 Jy ! Component: 100 - total flux cleaned = 1.33211e-05 Jy ! Component: 150 - total flux cleaned = 5.51214e-06 Jy ! Component: 200 - total flux cleaned = 5.76997e-06 Jy ! Total flux subtracted in 200 components = 5.76997e-06 Jy ! Clean residual min=-0.001847 max=0.001335 Jy/beam ! Clean residual mean=-0.000004 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.052831 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.052831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069104Jy sigma=0.000750 ! Fit after self-cal, rms=0.069102Jy sigma=0.000750 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.521 mas, bmaj=8.248 mas, bpa=13.56 degrees ! Estimated noise=505.063 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.521 x 8.248 at 13.56 degrees (North through East) ! Clean map min=-0.0014855 max=0.04652 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=7.55 mas, bpa=14.49 degrees ! Estimated noise=696.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360835 Jy ! Component: 100 - total flux cleaned = 0.0458061 Jy ! Component: 150 - total flux cleaned = 0.0498101 Jy ! Component: 200 - total flux cleaned = 0.0515923 Jy ! Total flux subtracted in 200 components = 0.0515923 Jy ! Clean residual min=-0.002205 max=0.002317 Jy/beam ! Clean residual mean=0.000001 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0515923 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0515923 Jy ! Inverting map and beam ! Estimated beam: bmin=4.521 mas, bmaj=8.248 mas, bpa=13.56 degrees ! Estimated noise=505.063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437721 Jy ! Component: 100 - total flux cleaned = 0.000712113 Jy ! Component: 150 - total flux cleaned = 0.000915211 Jy ! Component: 200 - total flux cleaned = 0.00103211 Jy ! Total flux subtracted in 200 components = 0.00103211 Jy ! Clean residual min=-0.001570 max=0.001472 Jy/beam ! Clean residual mean=-0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0526244 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0526244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=10.14 mas, bpa=-1.528 degrees ! Estimated noise=571.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198494 Jy ! Component: 100 - total flux cleaned = 0.000234104 Jy ! Component: 150 - total flux cleaned = 0.000225114 Jy ! Component: 200 - total flux cleaned = 0.000217054 Jy ! Total flux subtracted in 200 components = 0.000217054 Jy ! Clean residual min=-0.001836 max=0.001339 Jy/beam ! Clean residual mean=-0.000004 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0528415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.03251e-07 Jy ! Component: 100 - total flux cleaned = -7.67446e-06 Jy ! Component: 150 - total flux cleaned = -1.43219e-05 Jy ! Component: 200 - total flux cleaned = -1.39582e-05 Jy ! Total flux subtracted in 200 components = -1.39582e-05 Jy ! Clean residual min=-0.001840 max=0.001336 Jy/beam ! Clean residual mean=-0.000004 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0528275 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.0528275 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.521 mas, bmaj=8.248 mas, bpa=13.56 degrees ! Estimated noise=505.063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112031 Jy ! Component: 100 - total flux cleaned = -9.06129e-05 Jy ! Component: 150 - total flux cleaned = -5.34883e-05 Jy ! Component: 200 - total flux cleaned = -2.92134e-05 Jy ! Total flux subtracted in 200 components = -2.92134e-05 Jy ! Clean residual min=-0.001543 max=0.001442 Jy/beam ! Clean residual mean=-0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0527983 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0527983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069103Jy sigma=0.000750 ! Fit after self-cal, rms=0.069101Jy sigma=0.000750 wmodel J0107+2611_S_2014_08_05_pus_map.mod ! Writing 54 model components to file: J0107+2611_S_2014_08_05_pus_map.mod wobs J0107+2611_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0107+2611_S_2014_08_05_pus_uvs.fits wwins J0107+2611_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0107+2611_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250517 Jy ! Component: 100 - total flux cleaned = -0.000322326 Jy ! Component: 150 - total flux cleaned = -0.000368076 Jy ! Component: 200 - total flux cleaned = -0.000476741 Jy ! Component: 250 - total flux cleaned = -0.000518659 Jy ! Component: 300 - total flux cleaned = -0.000498409 Jy ! Component: 350 - total flux cleaned = -0.000537804 Jy ! Component: 400 - total flux cleaned = -0.000518108 Jy ! Component: 450 - total flux cleaned = -0.000443988 Jy ! Component: 500 - total flux cleaned = -0.00046229 Jy ! Component: 550 - total flux cleaned = -0.00040941 Jy ! Component: 600 - total flux cleaned = -0.000478266 Jy ! Component: 650 - total flux cleaned = -0.000478143 Jy ! Component: 700 - total flux cleaned = -0.000511365 Jy ! Component: 750 - total flux cleaned = -0.00052759 Jy ! Component: 800 - total flux cleaned = -0.000607107 Jy ! Component: 850 - total flux cleaned = -0.000653857 Jy ! Component: 900 - total flux cleaned = -0.000699928 Jy ! Component: 950 - total flux cleaned = -0.000714933 Jy ! Component: 1000 - total flux cleaned = -0.000774361 Jy ! Component: 1050 - total flux cleaned = -0.000818192 Jy ! Component: 1100 - total flux cleaned = -0.000847079 Jy ! Component: 1150 - total flux cleaned = -0.000889702 Jy ! Component: 1200 - total flux cleaned = -0.000931672 Jy ! Component: 1250 - total flux cleaned = -0.000959249 Jy ! Component: 1300 - total flux cleaned = -0.000945678 Jy ! Component: 1350 - total flux cleaned = -0.000972599 Jy ! Component: 1400 - total flux cleaned = -0.000972564 Jy ! Component: 1450 - total flux cleaned = -0.00097265 Jy ! Component: 1500 - total flux cleaned = -0.0010241 Jy ! Component: 1550 - total flux cleaned = -0.00102379 Jy ! Component: 1600 - total flux cleaned = -0.00103613 Jy ! Component: 1650 - total flux cleaned = -0.000998605 Jy ! Component: 1700 - total flux cleaned = -0.00099847 Jy ! Component: 1750 - total flux cleaned = -0.00102249 Jy ! Component: 1800 - total flux cleaned = -0.00102241 Jy ! Component: 1850 - total flux cleaned = -0.00101034 Jy ! Component: 1900 - total flux cleaned = -0.00103379 Jy ! Component: 1950 - total flux cleaned = -0.00105705 Jy ! Component: 2000 - total flux cleaned = -0.00103422 Jy ! Component: 2050 - total flux cleaned = -0.00106837 Jy ! Component: 2100 - total flux cleaned = -0.001102 Jy ! Component: 2150 - total flux cleaned = -0.00107979 Jy ! Component: 2200 - total flux cleaned = -0.00110182 Jy ! Component: 2250 - total flux cleaned = -0.00111264 Jy ! Component: 2300 - total flux cleaned = -0.00109109 Jy ! Component: 2350 - total flux cleaned = -0.00108046 Jy ! Component: 2400 - total flux cleaned = -0.00110174 Jy ! Component: 2450 - total flux cleaned = -0.00110178 Jy ! Component: 2500 - total flux cleaned = -0.00117465 Jy ! Component: 2550 - total flux cleaned = -0.00116432 Jy ! Component: 2600 - total flux cleaned = -0.00121528 Jy ! Component: 2650 - total flux cleaned = -0.00120511 Jy ! Component: 2700 - total flux cleaned = -0.00121522 Jy ! Component: 2750 - total flux cleaned = -0.00123517 Jy ! Component: 2800 - total flux cleaned = -0.00120561 Jy ! Component: 2850 - total flux cleaned = -0.00129384 Jy ! Component: 2900 - total flux cleaned = -0.00128406 Jy ! Component: 2950 - total flux cleaned = -0.00134202 Jy ! Component: 3000 - total flux cleaned = -0.00136124 Jy ! Component: 3050 - total flux cleaned = -0.00135178 Jy ! Component: 3100 - total flux cleaned = -0.00139894 Jy ! Component: 3150 - total flux cleaned = -0.00137082 Jy ! Component: 3200 - total flux cleaned = -0.00136148 Jy ! Component: 3250 - total flux cleaned = -0.0013708 Jy ! Component: 3300 - total flux cleaned = -0.00140752 Jy ! Component: 3350 - total flux cleaned = -0.00141655 Jy ! Component: 3400 - total flux cleaned = -0.00138041 Jy ! Component: 3450 - total flux cleaned = -0.00141641 Jy ! Component: 3500 - total flux cleaned = -0.00140741 Jy ! Component: 3550 - total flux cleaned = -0.00140744 Jy ! Component: 3600 - total flux cleaned = -0.00138975 Jy ! Component: 3650 - total flux cleaned = -0.00139853 Jy ! Component: 3700 - total flux cleaned = -0.00139848 Jy ! Component: 3750 - total flux cleaned = -0.00138114 Jy ! Component: 3800 - total flux cleaned = -0.00138972 Jy ! Component: 3850 - total flux cleaned = -0.00135549 Jy ! Component: 3900 - total flux cleaned = -0.00133849 Jy ! Component: 3950 - total flux cleaned = -0.00138922 Jy ! Component: 4000 - total flux cleaned = -0.00134709 Jy ! Component: 4050 - total flux cleaned = -0.00133036 Jy ! Total flux subtracted in 4096 components = -0.00133043 Jy ! Clean residual min=-0.000458 max=0.000511 Jy/beam ! Clean residual mean=-0.000003 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.0514679 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 343 components and 0.0514679 Jy ![Exited script file: muppet] wmap "J0107+2611_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.521 x 8.248 at 13.56 degrees (North through East) ! Clean map min=-0.001097 max=0.046461 Jy/beam ! Writing clean map to FITS file: J0107+2611_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0464614 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000157961 device "J0107+2611_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0107+2611_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01995 1.01995 2.03991 4.07981 8.15962 16.3192 32.6385 65.277 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.521 x 8.248 at 13.56 degrees (North through East) ! Clean map min=-0.001097 max=0.046461 Jy/beam quit ! Quitting program ! Log file J0107+2611_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:11:24 2016