! Started logfile: J0107+1312_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:40:28 2016 obs J0107+1312_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0107+1312_S_2014_06_09_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.611382 visibilities/baseline/integration-bin. ! Found source: J0107+1312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 9024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0107+1312_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.874801Jy sigma=0.010341 ! Fit after self-cal, rms=0.845323Jy sigma=0.009993 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=8.625 mas, bpa=8.647 degrees ! Estimated noise=1023.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120206 Jy ! Component: 100 - total flux cleaned = 0.146787 Jy ! Total flux subtracted in 100 components = 0.146787 Jy ! Clean residual min=-0.008533 max=0.016507 Jy/beam ! Clean residual mean=-0.000042 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 0.146787 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.146787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082975Jy sigma=0.000910 ! Fit after self-cal, rms=0.082976Jy sigma=0.000910 ! Inverting map ! Added new window around map position (-6.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145834 Jy ! Component: 100 - total flux cleaned = 0.0235016 Jy ! Total flux subtracted in 100 components = 0.0235016 Jy ! Clean residual min=-0.006964 max=0.013875 Jy/beam ! Clean residual mean=-0.000028 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.170289 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.170289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079228Jy sigma=0.000861 ! Fit after self-cal, rms=0.078796Jy sigma=0.000858 ! Inverting map ! Added new window around map position (-15, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128427 Jy ! Component: 100 - total flux cleaned = 0.0203033 Jy ! Total flux subtracted in 100 components = 0.0203033 Jy ! Clean residual min=-0.005790 max=0.005713 Jy/beam ! Clean residual mean=-0.000017 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 0.190592 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.190592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076149Jy sigma=0.000822 ! Fit after self-cal, rms=0.075876Jy sigma=0.000820 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.641 mas, bmaj=9.598 mas, bpa=9.331 degrees ! Estimated noise=642.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00910199 Jy ! Component: 100 - total flux cleaned = 0.0148503 Jy ! Component: 150 - total flux cleaned = 0.0190761 Jy ! Component: 200 - total flux cleaned = 0.0223634 Jy ! Total flux subtracted in 200 components = 0.0223634 Jy ! Clean residual min=-0.004239 max=0.005092 Jy/beam ! Clean residual mean=-0.000018 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.212955 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 91 components and 0.212955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074539Jy sigma=0.000804 ! Fit after self-cal, rms=0.074400Jy sigma=0.000802 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.97 KP 1.02 ! LA 1.13 MK 1.00* NL 1.00 OV 1.02 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.04 KP 1.01 ! LA 1.13 MK 1.00* NL 1.15 OV 1.03 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.00 KP 0.90 ! LA 0.86 MK 1.00* NL 0.99 OV 0.95 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00 KP 0.87 ! LA 0.85 MK 1.00* NL 1.04 OV 1.01 ! PT 0.97 SC 0.99 ! ! ! Fit before self-cal, rms=0.074400Jy sigma=0.000802 ! Fit after self-cal, rms=0.070727Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.657 mas, bmaj=9.661 mas, bpa=9.102 degrees ! Estimated noise=637.067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303882 Jy ! Component: 100 - total flux cleaned = 0.00384792 Jy ! Component: 150 - total flux cleaned = 0.00412762 Jy ! Component: 200 - total flux cleaned = 0.00424473 Jy ! Total flux subtracted in 200 components = 0.00424473 Jy ! Clean residual min=-0.002403 max=0.003249 Jy/beam ! Clean residual mean=0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.2172 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 0.2172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070453Jy sigma=0.000769 ! Fit after self-cal, rms=0.070445Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070445Jy sigma=0.000768 ! Fit after self-cal, rms=0.070152Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.663 mas, bmaj=9.658 mas, bpa=9.081 degrees ! Estimated noise=635.806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011874 Jy ! Component: 100 - total flux cleaned = 0.00151538 Jy ! Component: 150 - total flux cleaned = 0.00169615 Jy ! Component: 200 - total flux cleaned = 0.00169606 Jy ! Total flux subtracted in 200 components = 0.00169606 Jy ! Clean residual min=-0.002063 max=0.002684 Jy/beam ! Clean residual mean=0.000004 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.218896 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 0.218896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070071Jy sigma=0.000765 ! Fit after self-cal, rms=0.070064Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214858 Jy ! Component: 100 - total flux cleaned = 0.00258904 Jy ! Component: 150 - total flux cleaned = 0.00280164 Jy ! Component: 200 - total flux cleaned = 0.00295683 Jy ! Total flux subtracted in 200 components = 0.00295683 Jy ! Clean residual min=-0.001937 max=0.002123 Jy/beam ! Clean residual mean=0.000009 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.221853 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 167 components and 0.221853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069979Jy sigma=0.000763 ! Fit after self-cal, rms=0.069974Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069974Jy sigma=0.000763 ! Fit after self-cal, rms=0.069805Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.661 mas, bmaj=9.652 mas, bpa=9.122 degrees ! Estimated noise=634.915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115901 Jy ! Component: 100 - total flux cleaned = 0.00162 Jy ! Component: 150 - total flux cleaned = 0.00188766 Jy ! Component: 200 - total flux cleaned = 0.00203614 Jy ! Total flux subtracted in 200 components = 0.00203614 Jy ! Clean residual min=-0.001805 max=0.001869 Jy/beam ! Clean residual mean=0.000006 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.223889 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 197 components and 0.223889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069770Jy sigma=0.000763 ! Fit after self-cal, rms=0.069764Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333541 Jy ! Component: 100 - total flux cleaned = 0.000362794 Jy ! Component: 150 - total flux cleaned = 0.000363622 Jy ! Component: 200 - total flux cleaned = 0.000363851 Jy ! Total flux subtracted in 200 components = 0.000363851 Jy ! Clean residual min=-0.001767 max=0.001818 Jy/beam ! Clean residual mean=0.000007 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.224253 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 219 components and 0.224253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069744Jy sigma=0.000763 ! Fit after self-cal, rms=0.069742Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069742Jy sigma=0.000763 ! Fit after self-cal, rms=0.069693Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.367 mas, bmaj=13.29 mas, bpa=-11.16 degrees ! Estimated noise=698.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765985 Jy ! Component: 100 - total flux cleaned = 0.000956456 Jy ! Component: 150 - total flux cleaned = 0.00100267 Jy ! Component: 200 - total flux cleaned = 0.000981745 Jy ! Total flux subtracted in 200 components = 0.000981745 Jy ! Clean residual min=-0.001839 max=0.001684 Jy/beam ! Clean residual mean=0.000009 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.225235 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 253 components and 0.225235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069680Jy sigma=0.000762 ! Fit after self-cal, rms=0.069677Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173503 Jy ! Component: 100 - total flux cleaned = 0.0001735 Jy ! Component: 150 - total flux cleaned = 0.000155198 Jy ! Component: 200 - total flux cleaned = 0.00012014 Jy ! Total flux subtracted in 200 components = 0.00012014 Jy ! Clean residual min=-0.001780 max=0.001607 Jy/beam ! Clean residual mean=0.000009 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.225355 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 273 components and 0.225355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069670Jy sigma=0.000762 ! Fit after self-cal, rms=0.069669Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=9.648 mas, bpa=9.134 degrees ! Estimated noise=634.815 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.66 x 9.648 at 9.134 degrees (North through East) ! Clean map min=-0.0021201 max=0.15083 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=8.648 mas, bpa=8.54 degrees ! Estimated noise=1002.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117147 Jy ! Component: 100 - total flux cleaned = 0.148167 Jy ! Component: 150 - total flux cleaned = 0.164872 Jy ! Component: 200 - total flux cleaned = 0.175861 Jy ! Total flux subtracted in 200 components = 0.175861 Jy ! Clean residual min=-0.004957 max=0.006187 Jy/beam ! Clean residual mean=-0.000024 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.175861 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.175861 Jy ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=9.648 mas, bpa=9.134 degrees ! Estimated noise=634.815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012353 Jy ! Component: 100 - total flux cleaned = 0.0205739 Jy ! Component: 150 - total flux cleaned = 0.0264182 Jy ! Component: 200 - total flux cleaned = 0.030893 Jy ! Total flux subtracted in 200 components = 0.030893 Jy ! Clean residual min=-0.002874 max=0.002917 Jy/beam ! Clean residual mean=-0.000019 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.206754 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 82 components and 0.206754 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.367 mas, bmaj=13.29 mas, bpa=-11.16 degrees ! Estimated noise=698.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491914 Jy ! Component: 100 - total flux cleaned = 0.00840843 Jy ! Component: 150 - total flux cleaned = 0.0108435 Jy ! Component: 200 - total flux cleaned = 0.0121684 Jy ! Total flux subtracted in 200 components = 0.0121684 Jy ! Clean residual min=-0.002146 max=0.001998 Jy/beam ! Clean residual mean=-0.000005 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.218923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100817 Jy ! Component: 100 - total flux cleaned = 0.00189174 Jy ! Component: 150 - total flux cleaned = 0.00261969 Jy ! Component: 200 - total flux cleaned = 0.00322493 Jy ! Total flux subtracted in 200 components = 0.00322493 Jy ! Clean residual min=-0.001899 max=0.001592 Jy/beam ! Clean residual mean=0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.222148 Jy ! Adding 131 model components to the UV plane model. ! The established model now contains 200 components and 0.222148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=9.648 mas, bpa=9.134 degrees ! Estimated noise=634.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435205 Jy ! Component: 100 - total flux cleaned = 0.000761074 Jy ! Component: 150 - total flux cleaned = 0.00101349 Jy ! Component: 200 - total flux cleaned = 0.00109829 Jy ! Total flux subtracted in 200 components = 0.00109829 Jy ! Clean residual min=-0.001762 max=0.001637 Jy/beam ! Clean residual mean=0.000003 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.223246 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 225 components and 0.223246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069699Jy sigma=0.000762 ! Fit after self-cal, rms=0.069680Jy sigma=0.000762 wmodel J0107+1312_S_2014_06_09_pus_map.mod ! Writing 225 model components to file: J0107+1312_S_2014_06_09_pus_map.mod wobs J0107+1312_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0107+1312_S_2014_06_09_pus_uvs.fits wwins J0107+1312_S_2014_06_09_pus_map.win ! wwins: Wrote 5 windows to J0107+1312_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036587 Jy ! Component: 100 - total flux cleaned = -0.000336318 Jy ! Component: 150 - total flux cleaned = -0.000437809 Jy ! Component: 200 - total flux cleaned = -0.000485855 Jy ! Component: 250 - total flux cleaned = -0.000508274 Jy ! Component: 300 - total flux cleaned = -0.0005299 Jy ! Component: 350 - total flux cleaned = -0.000551448 Jy ! Component: 400 - total flux cleaned = -0.000551612 Jy ! Component: 450 - total flux cleaned = -0.000531313 Jy ! Component: 500 - total flux cleaned = -0.00051138 Jy ! Component: 550 - total flux cleaned = -0.000454273 Jy ! Component: 600 - total flux cleaned = -0.000398874 Jy ! Component: 650 - total flux cleaned = -0.000308384 Jy ! Component: 700 - total flux cleaned = -0.000202067 Jy ! Component: 750 - total flux cleaned = -0.000167329 Jy ! Component: 800 - total flux cleaned = -6.47468e-05 Jy ! Component: 850 - total flux cleaned = 2.39196e-06 Jy ! Component: 900 - total flux cleaned = 6.81047e-05 Jy ! Component: 950 - total flux cleaned = 0.000164563 Jy ! Component: 1000 - total flux cleaned = 0.000227356 Jy ! Component: 1050 - total flux cleaned = 0.000258311 Jy ! Component: 1100 - total flux cleaned = 0.00033395 Jy ! Component: 1150 - total flux cleaned = 0.000333541 Jy ! Component: 1200 - total flux cleaned = 0.00030417 Jy ! Component: 1250 - total flux cleaned = 0.000318706 Jy ! Component: 1300 - total flux cleaned = 0.000318619 Jy ! Component: 1350 - total flux cleaned = 0.00029044 Jy ! Component: 1400 - total flux cleaned = 0.000262597 Jy ! Component: 1450 - total flux cleaned = 0.000262875 Jy ! Component: 1500 - total flux cleaned = 0.000249469 Jy ! Component: 1550 - total flux cleaned = 0.000262812 Jy ! Component: 1600 - total flux cleaned = 0.000276024 Jy ! Component: 1650 - total flux cleaned = 0.00028899 Jy ! Component: 1700 - total flux cleaned = 0.000327569 Jy ! Component: 1750 - total flux cleaned = 0.000302104 Jy ! Component: 1800 - total flux cleaned = 0.000339877 Jy ! Component: 1850 - total flux cleaned = 0.000340003 Jy ! Component: 1900 - total flux cleaned = 0.000352237 Jy ! Component: 1950 - total flux cleaned = 0.000352303 Jy ! Component: 2000 - total flux cleaned = 0.000376697 Jy ! Component: 2050 - total flux cleaned = 0.000436516 Jy ! Component: 2100 - total flux cleaned = 0.000471908 Jy ! Component: 2150 - total flux cleaned = 0.000448585 Jy ! Component: 2200 - total flux cleaned = 0.000460181 Jy ! Component: 2250 - total flux cleaned = 0.000471573 Jy ! Component: 2300 - total flux cleaned = 0.000505572 Jy ! Component: 2350 - total flux cleaned = 0.000483071 Jy ! Component: 2400 - total flux cleaned = 0.000494152 Jy ! Component: 2450 - total flux cleaned = 0.000494012 Jy ! Component: 2500 - total flux cleaned = 0.000471895 Jy ! Component: 2550 - total flux cleaned = 0.000428555 Jy ! Component: 2600 - total flux cleaned = 0.000439409 Jy ! Component: 2650 - total flux cleaned = 0.000428845 Jy ! Component: 2700 - total flux cleaned = 0.000418367 Jy ! Component: 2750 - total flux cleaned = 0.000428877 Jy ! Component: 2800 - total flux cleaned = 0.000387099 Jy ! Component: 2850 - total flux cleaned = 0.000376739 Jy ! Component: 2900 - total flux cleaned = 0.000335761 Jy ! Component: 2950 - total flux cleaned = 0.000305231 Jy ! Component: 3000 - total flux cleaned = 0.000295201 Jy ! Component: 3050 - total flux cleaned = 0.000285185 Jy ! Component: 3100 - total flux cleaned = 0.00028519 Jy ! Component: 3150 - total flux cleaned = 0.000245696 Jy ! Component: 3200 - total flux cleaned = 0.0002457 Jy ! Component: 3250 - total flux cleaned = 0.000265144 Jy ! Component: 3300 - total flux cleaned = 0.000245871 Jy ! Component: 3350 - total flux cleaned = 0.000207524 Jy ! Component: 3400 - total flux cleaned = 0.000217014 Jy ! Component: 3450 - total flux cleaned = 0.000207579 Jy ! Component: 3500 - total flux cleaned = 0.000160769 Jy ! Component: 3550 - total flux cleaned = 0.000123583 Jy ! Component: 3600 - total flux cleaned = 0.00011434 Jy ! Component: 3650 - total flux cleaned = 9.59923e-05 Jy ! Component: 3700 - total flux cleaned = 7.77929e-05 Jy ! Component: 3750 - total flux cleaned = 9.59802e-05 Jy ! Component: 3800 - total flux cleaned = 9.59814e-05 Jy ! Component: 3850 - total flux cleaned = 8.71157e-05 Jy ! Component: 3900 - total flux cleaned = 0.000122755 Jy ! Component: 3950 - total flux cleaned = 9.62479e-05 Jy ! Component: 4000 - total flux cleaned = 8.75229e-05 Jy ! Component: 4050 - total flux cleaned = 0.000105056 Jy ! Total flux subtracted in 4096 components = 9.63647e-05 Jy ! Clean residual min=-0.000585 max=0.000490 Jy/beam ! Clean residual mean=0.000002 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.223342 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 470 components and 0.223342 Jy ![Exited script file: muppet] wmap "J0107+1312_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.66 x 9.648 at 9.134 degrees (North through East) ! Clean map min=-0.0016676 max=0.15116 Jy/beam ! Writing clean map to FITS file: J0107+1312_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.151158 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00015442 device "J0107+1312_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0107+1312_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.306476 0.306476 0.612951 1.2259 2.4518 4.90361 9.80722 19.6144 39.2289 78.4577 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.151 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.66 x 9.648 at 9.134 degrees (North through East) ! Clean map min=-0.0016676 max=0.15116 Jy/beam quit ! Quitting program ! Log file J0107+1312_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:40:33 2016