! Started logfile: J0106-4034_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:51:14 2016 obs J0106-4034_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2014_08_09_pus_uva.fits ! AN table 1: 90 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.396049 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 6416 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.695799Jy sigma=0.004415 ! Fit after self-cal, rms=0.652468Jy sigma=0.004191 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=14.04 mas, bpa=11.22 degrees ! Estimated noise=1845.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284138 Jy ! Component: 100 - total flux cleaned = 0.367663 Jy ! Total flux subtracted in 100 components = 0.367663 Jy ! Clean residual min=-0.024912 max=0.061167 Jy/beam ! Clean residual mean=-0.000086 rms=0.006052 Jy/beam ! Combined flux in latest and established models = 0.367663 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.367663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177937Jy sigma=0.001095 ! Fit after self-cal, rms=0.177763Jy sigma=0.001094 ! Inverting map ! Added new window around map position (-5.5, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535721 Jy ! Component: 100 - total flux cleaned = 0.0700741 Jy ! Total flux subtracted in 100 components = 0.0700741 Jy ! Clean residual min=-0.018124 max=0.044280 Jy/beam ! Clean residual mean=-0.000044 rms=0.004507 Jy/beam ! Combined flux in latest and established models = 0.437737 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.437737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159629Jy sigma=0.000945 ! Fit after self-cal, rms=0.158749Jy sigma=0.000938 ! Inverting map ! Added new window around map position (6, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326764 Jy ! Component: 100 - total flux cleaned = 0.0390182 Jy ! Total flux subtracted in 100 components = 0.0390182 Jy ! Clean residual min=-0.015146 max=0.014193 Jy/beam ! Clean residual mean=-0.000016 rms=0.003633 Jy/beam ! Combined flux in latest and established models = 0.476755 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.476755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152017Jy sigma=0.000896 ! Fit after self-cal, rms=0.151952Jy sigma=0.000895 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=18.1 mas, bpa=9.961 degrees ! Estimated noise=1321.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150929 Jy ! Component: 100 - total flux cleaned = 0.0162439 Jy ! Component: 150 - total flux cleaned = 0.0165672 Jy ! Component: 200 - total flux cleaned = 0.0171112 Jy ! Total flux subtracted in 200 components = 0.0171112 Jy ! Clean residual min=-0.015420 max=0.012973 Jy/beam ! Clean residual mean=0.000028 rms=0.003467 Jy/beam ! Combined flux in latest and established models = 0.493866 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.493866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149707Jy sigma=0.000883 ! Fit after self-cal, rms=0.149615Jy sigma=0.000883 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.41 KP 1.09 ! LA 1.11 MK 1.00* NL 1.09 OV 0.91 ! PT 1.05 SC 0.96 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.35 KP 1.03 ! LA 1.08 MK 1.00* NL 1.16 OV 0.97 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.52 KP 0.91 ! LA 0.84 MK 1.00* NL 1.14 OV 0.89 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.39 KP 0.88 ! LA 0.82 MK 1.00* NL 1.17 OV 0.92 ! PT 1.04 SC 0.95 ! ! ! Fit before self-cal, rms=0.149615Jy sigma=0.000883 ! Fit after self-cal, rms=0.159595Jy sigma=0.000791 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=18.8 mas, bpa=10.78 degrees ! Estimated noise=1370.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00577936 Jy ! Component: 100 - total flux cleaned = -0.00753649 Jy ! Component: 150 - total flux cleaned = -0.00846516 Jy ! Component: 200 - total flux cleaned = -0.00866885 Jy ! Total flux subtracted in 200 components = -0.00866885 Jy ! Clean residual min=-0.009039 max=0.010387 Jy/beam ! Clean residual mean=0.000009 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 0.485197 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.485197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158592Jy sigma=0.000784 ! Fit after self-cal, rms=0.159245Jy sigma=0.000783 ! Inverting map ! Added new window around map position (-31, 62.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488753 Jy ! Component: 100 - total flux cleaned = 0.00397562 Jy ! Component: 150 - total flux cleaned = 0.00416306 Jy ! Component: 200 - total flux cleaned = 0.00433187 Jy ! Total flux subtracted in 200 components = 0.00433187 Jy ! Clean residual min=-0.008280 max=0.007888 Jy/beam ! Clean residual mean=0.000016 rms=0.001946 Jy/beam ! Combined flux in latest and established models = 0.489529 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 99 components and 0.489529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158162Jy sigma=0.000779 ! Fit after self-cal, rms=0.158210Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158210Jy sigma=0.000778 ! Fit after self-cal, rms=0.167831Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.979 mas, bmaj=18.87 mas, bpa=10.84 degrees ! Estimated noise=1375.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00487877 Jy ! Component: 100 - total flux cleaned = -0.00506961 Jy ! Component: 150 - total flux cleaned = -0.00458127 Jy ! Component: 200 - total flux cleaned = -0.00428494 Jy ! Total flux subtracted in 200 components = -0.00428494 Jy ! Clean residual min=-0.006761 max=0.005531 Jy/beam ! Clean residual mean=0.000016 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.485244 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 123 components and 0.485244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167373Jy sigma=0.000770 ! Fit after self-cal, rms=0.167565Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424089 Jy ! Component: 100 - total flux cleaned = 0.000422681 Jy ! Component: 150 - total flux cleaned = 0.000302474 Jy ! Component: 200 - total flux cleaned = 0.000524516 Jy ! Total flux subtracted in 200 components = 0.000524516 Jy ! Clean residual min=-0.006447 max=0.005409 Jy/beam ! Clean residual mean=0.000019 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.485769 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 148 components and 0.485769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167330Jy sigma=0.000769 ! Fit after self-cal, rms=0.167358Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167358Jy sigma=0.000769 ! Fit after self-cal, rms=0.180159Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.982 mas, bmaj=18.86 mas, bpa=10.77 degrees ! Estimated noise=1375.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00333739 Jy ! Component: 100 - total flux cleaned = -0.00357851 Jy ! Component: 150 - total flux cleaned = -0.00347335 Jy ! Component: 200 - total flux cleaned = -0.00328824 Jy ! Total flux subtracted in 200 components = -0.00328824 Jy ! Clean residual min=-0.005849 max=0.004691 Jy/beam ! Clean residual mean=0.000037 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.482481 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 170 components and 0.482481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179949Jy sigma=0.000762 ! Fit after self-cal, rms=0.180027Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245593 Jy ! Component: 100 - total flux cleaned = 0.000414817 Jy ! Component: 150 - total flux cleaned = 0.000495556 Jy ! Component: 200 - total flux cleaned = 0.000651656 Jy ! Total flux subtracted in 200 components = 0.000651656 Jy ! Clean residual min=-0.005647 max=0.004596 Jy/beam ! Clean residual mean=0.000040 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.483132 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 181 components and 0.483132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179900Jy sigma=0.000761 ! Fit after self-cal, rms=0.179886Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179886Jy sigma=0.000761 ! Fit after self-cal, rms=0.183626Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.967 mas, bmaj=34.38 mas, bpa=0.03077 degrees ! Estimated noise=1503.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00269378 Jy ! Component: 100 - total flux cleaned = -0.00307128 Jy ! Component: 150 - total flux cleaned = -0.00307195 Jy ! Component: 200 - total flux cleaned = -0.0030706 Jy ! Total flux subtracted in 200 components = -0.0030706 Jy ! Clean residual min=-0.005998 max=0.004588 Jy/beam ! Clean residual mean=0.000069 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.480062 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 200 components and 0.480062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183515Jy sigma=0.000760 ! Fit after self-cal, rms=0.183555Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133569 Jy ! Component: 100 - total flux cleaned = -0.000135387 Jy ! Component: 150 - total flux cleaned = -0.000140187 Jy ! Component: 200 - total flux cleaned = -0.000140853 Jy ! Total flux subtracted in 200 components = -0.000140853 Jy ! Clean residual min=-0.005966 max=0.004601 Jy/beam ! Clean residual mean=0.000069 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.479921 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 211 components and 0.479921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183487Jy sigma=0.000760 ! Fit after self-cal, rms=0.183478Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=18.92 mas, bpa=10.81 degrees ! Estimated noise=1375.55 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.985 x 18.92 at 10.81 degrees (North through East) ! Clean map min=-0.011555 max=0.35139 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=14.63 mas, bpa=11.98 degrees ! Estimated noise=1965.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.30203 Jy ! Component: 100 - total flux cleaned = 0.378587 Jy ! Component: 150 - total flux cleaned = 0.414263 Jy ! Component: 200 - total flux cleaned = 0.432684 Jy ! Total flux subtracted in 200 components = 0.432684 Jy ! Clean residual min=-0.009319 max=0.012650 Jy/beam ! Clean residual mean=-0.000012 rms=0.002158 Jy/beam ! Combined flux in latest and established models = 0.432684 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.432684 Jy ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=18.92 mas, bpa=10.81 degrees ! Estimated noise=1375.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197163 Jy ! Component: 100 - total flux cleaned = 0.0307677 Jy ! Component: 150 - total flux cleaned = 0.0378955 Jy ! Component: 200 - total flux cleaned = 0.041396 Jy ! Total flux subtracted in 200 components = 0.041396 Jy ! Clean residual min=-0.006625 max=0.004980 Jy/beam ! Clean residual mean=0.000023 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.47408 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 65 components and 0.47408 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.967 mas, bmaj=34.38 mas, bpa=0.03077 degrees ! Estimated noise=1503.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436892 Jy ! Component: 100 - total flux cleaned = 0.00572026 Jy ! Component: 150 - total flux cleaned = 0.00618768 Jy ! Component: 200 - total flux cleaned = 0.00626989 Jy ! Total flux subtracted in 200 components = 0.00626989 Jy ! Clean residual min=-0.006507 max=0.004786 Jy/beam ! Clean residual mean=0.000078 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.48035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151726 Jy ! Component: 100 - total flux cleaned = -0.000151829 Jy ! Component: 150 - total flux cleaned = -0.000215383 Jy ! Component: 200 - total flux cleaned = -0.000278026 Jy ! Total flux subtracted in 200 components = -0.000278026 Jy ! Clean residual min=-0.006172 max=0.004782 Jy/beam ! Clean residual mean=0.000077 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.480071 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 106 components and 0.480071 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=18.92 mas, bpa=10.81 degrees ! Estimated noise=1375.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.2823e-05 Jy ! Component: 100 - total flux cleaned = 0.000196508 Jy ! Component: 150 - total flux cleaned = 0.000305064 Jy ! Component: 200 - total flux cleaned = 0.000401983 Jy ! Total flux subtracted in 200 components = 0.000401983 Jy ! Clean residual min=-0.005373 max=0.004525 Jy/beam ! Clean residual mean=0.000046 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 0.480473 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 127 components and 0.480473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184138Jy sigma=0.000761 ! Fit after self-cal, rms=0.183919Jy sigma=0.000761 wmodel J0106-4034_S_2014_08_09_pus_map.mod ! Writing 127 model components to file: J0106-4034_S_2014_08_09_pus_map.mod wobs J0106-4034_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2014_08_09_pus_uvs.fits wwins J0106-4034_S_2014_08_09_pus_map.win ! wwins: Wrote 4 windows to J0106-4034_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015184 Jy ! Component: 100 - total flux cleaned = -0.00160067 Jy ! Component: 150 - total flux cleaned = -0.00152708 Jy ! Component: 200 - total flux cleaned = -0.001527 Jy ! Component: 250 - total flux cleaned = -0.00131856 Jy ! Component: 300 - total flux cleaned = -0.00131772 Jy ! Component: 350 - total flux cleaned = -0.00112236 Jy ! Component: 400 - total flux cleaned = -0.00118556 Jy ! Component: 450 - total flux cleaned = -0.00130762 Jy ! Component: 500 - total flux cleaned = -0.00142658 Jy ! Component: 550 - total flux cleaned = -0.00136893 Jy ! Component: 600 - total flux cleaned = -0.00136906 Jy ! Component: 650 - total flux cleaned = -0.00114733 Jy ! Component: 700 - total flux cleaned = -0.00120215 Jy ! Component: 750 - total flux cleaned = -0.00109399 Jy ! Component: 800 - total flux cleaned = -0.000831106 Jy ! Component: 850 - total flux cleaned = -0.000830724 Jy ! Component: 900 - total flux cleaned = -0.000526649 Jy ! Component: 950 - total flux cleaned = -0.000477711 Jy ! Component: 1000 - total flux cleaned = -0.000478208 Jy ! Component: 1050 - total flux cleaned = -0.000624418 Jy ! Component: 1100 - total flux cleaned = -0.000862503 Jy ! Component: 1150 - total flux cleaned = -0.000861629 Jy ! Component: 1200 - total flux cleaned = -0.00114032 Jy ! Component: 1250 - total flux cleaned = -0.00127819 Jy ! Component: 1300 - total flux cleaned = -0.00155074 Jy ! Component: 1350 - total flux cleaned = -0.00172957 Jy ! Component: 1400 - total flux cleaned = -0.00173006 Jy ! Component: 1450 - total flux cleaned = -0.00173094 Jy ! Component: 1500 - total flux cleaned = -0.00190471 Jy ! Component: 1550 - total flux cleaned = -0.00190457 Jy ! Component: 1600 - total flux cleaned = -0.00177745 Jy ! Component: 1650 - total flux cleaned = -0.00181919 Jy ! Component: 1700 - total flux cleaned = -0.00181957 Jy ! Component: 1750 - total flux cleaned = -0.00169631 Jy ! Component: 1800 - total flux cleaned = -0.00177749 Jy ! Component: 1850 - total flux cleaned = -0.00173754 Jy ! Component: 1900 - total flux cleaned = -0.00157861 Jy ! Component: 1950 - total flux cleaned = -0.00150016 Jy ! Component: 2000 - total flux cleaned = -0.00157893 Jy ! Component: 2050 - total flux cleaned = -0.00146302 Jy ! Component: 2100 - total flux cleaned = -0.00169318 Jy ! Component: 2150 - total flux cleaned = -0.00161646 Jy ! Component: 2200 - total flux cleaned = -0.0014661 Jy ! Component: 2250 - total flux cleaned = -0.00161513 Jy ! Component: 2300 - total flux cleaned = -0.00146721 Jy ! Component: 2350 - total flux cleaned = -0.00139407 Jy ! Component: 2400 - total flux cleaned = -0.00135776 Jy ! Component: 2450 - total flux cleaned = -0.00117695 Jy ! Component: 2500 - total flux cleaned = -0.0011411 Jy ! Component: 2550 - total flux cleaned = -0.00103453 Jy ! Component: 2600 - total flux cleaned = -0.00103477 Jy ! Component: 2650 - total flux cleaned = -0.000999285 Jy ! Component: 2700 - total flux cleaned = -0.000859822 Jy ! Component: 2750 - total flux cleaned = -0.000859731 Jy ! Component: 2800 - total flux cleaned = -0.00075667 Jy ! Component: 2850 - total flux cleaned = -0.000790764 Jy ! Component: 2900 - total flux cleaned = -0.000621058 Jy ! Component: 2950 - total flux cleaned = -0.00062106 Jy ! Component: 3000 - total flux cleaned = -0.000687867 Jy ! Component: 3050 - total flux cleaned = -0.000521898 Jy ! Component: 3100 - total flux cleaned = -0.000621302 Jy ! Component: 3150 - total flux cleaned = -0.000588326 Jy ! Component: 3200 - total flux cleaned = -0.000556068 Jy ! Component: 3250 - total flux cleaned = -0.000491387 Jy ! Component: 3300 - total flux cleaned = -0.000459478 Jy ! Component: 3350 - total flux cleaned = -0.000427765 Jy ! Component: 3400 - total flux cleaned = -0.000332197 Jy ! Component: 3450 - total flux cleaned = -0.000364044 Jy ! Component: 3500 - total flux cleaned = -0.000301062 Jy ! Component: 3550 - total flux cleaned = -0.000144608 Jy ! Component: 3600 - total flux cleaned = -0.000206955 Jy ! Component: 3650 - total flux cleaned = -0.000114031 Jy ! Component: 3700 - total flux cleaned = -2.18383e-05 Jy ! Component: 3750 - total flux cleaned = 7.02519e-05 Jy ! Component: 3800 - total flux cleaned = 3.9703e-05 Jy ! Component: 3850 - total flux cleaned = 9.41662e-06 Jy ! Component: 3900 - total flux cleaned = 9.31694e-06 Jy ! Component: 3950 - total flux cleaned = 8.92229e-06 Jy ! Component: 4000 - total flux cleaned = 0.000128347 Jy ! Component: 4050 - total flux cleaned = 0.00015812 Jy ! Total flux subtracted in 4096 components = 0.000187631 Jy ! Clean residual min=-0.001687 max=0.001580 Jy/beam ! Clean residual mean=0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.480661 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 463 components and 0.480661 Jy ![Exited script file: muppet] wmap "J0106-4034_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.985 x 18.92 at 10.81 degrees (North through East) ! Clean map min=-0.0047638 max=0.36714 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.367137 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000617659 device "J0106-4034_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0106-4034_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.504711 0.504711 1.00942 2.01884 4.03768 8.07537 16.1507 32.3015 64.603 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.367 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.985 x 18.92 at 10.81 degrees (North through East) ! Clean map min=-0.0047638 max=0.36714 Jy/beam quit ! Quitting program ! Log file J0106-4034_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:51:20 2016