! Started logfile: J0106+2539_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:11:13 2016 obs J0106+2539_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0106+2539_S_2014_08_05_pus_uva.fits ! AN table 1: 91 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77265 visibilities/baseline/integration-bin. ! Found source: J0106+2539 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 12656 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106+2539_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957435Jy sigma=0.011366 ! Fit after self-cal, rms=0.933545Jy sigma=0.011119 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=7.457 mas, bpa=15.4 degrees ! Estimated noise=824.378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495635 Jy ! Component: 100 - total flux cleaned = 0.0681221 Jy ! Total flux subtracted in 100 components = 0.0681221 Jy ! Clean residual min=-0.004621 max=0.009024 Jy/beam ! Clean residual mean=0.000000 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.0681221 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0681221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076008Jy sigma=0.000817 ! Fit after self-cal, rms=0.075808Jy sigma=0.000815 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118125 Jy ! Component: 100 - total flux cleaned = 0.0184181 Jy ! Total flux subtracted in 100 components = 0.0184181 Jy ! Clean residual min=-0.003248 max=0.005065 Jy/beam ! Clean residual mean=-0.000000 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0865402 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.0865402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073338Jy sigma=0.000785 ! Fit after self-cal, rms=0.073200Jy sigma=0.000783 ! Inverting map ! Added new window around map position (-3, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514604 Jy ! Component: 100 - total flux cleaned = 0.0081535 Jy ! Total flux subtracted in 100 components = 0.0081535 Jy ! Clean residual min=-0.003090 max=0.005089 Jy/beam ! Clean residual mean=-0.000000 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0946937 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.0946937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072612Jy sigma=0.000777 ! Fit after self-cal, rms=0.072563Jy sigma=0.000777 ! Inverting map ! Added new window around map position (5.5, -13.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043173 Jy ! Component: 100 - total flux cleaned = 0.00685322 Jy ! Total flux subtracted in 100 components = 0.00685322 Jy ! Clean residual min=-0.002747 max=0.002790 Jy/beam ! Clean residual mean=-0.000001 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.101547 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.101547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072206Jy sigma=0.000773 ! Fit after self-cal, rms=0.072178Jy sigma=0.000773 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.478 mas, bmaj=8.194 mas, bpa=14.55 degrees ! Estimated noise=538.986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346233 Jy ! Component: 100 - total flux cleaned = 0.00580269 Jy ! Component: 150 - total flux cleaned = 0.007606 Jy ! Component: 200 - total flux cleaned = 0.00906694 Jy ! Total flux subtracted in 200 components = 0.00906694 Jy ! Clean residual min=-0.002062 max=0.002374 Jy/beam ! Clean residual mean=-0.000004 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.110614 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 81 components and 0.110614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071909Jy sigma=0.000770 ! Fit after self-cal, rms=0.071897Jy sigma=0.000770 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.80 HN 1.02 KP 1.11 ! LA 1.09 MK 1.00* NL 1.01 OV 1.01 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.06 KP 1.03 ! LA 1.05 MK 1.00* NL 0.98 OV 1.06 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 1.02 KP 0.89 ! LA 0.86 MK 1.00* NL 0.98 OV 1.01 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 1.00 KP 0.89 ! LA 0.82 MK 1.00* NL 1.09 OV 1.03 ! PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.071897Jy sigma=0.000770 ! Fit after self-cal, rms=0.068765Jy sigma=0.000765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.476 mas, bmaj=8.219 mas, bpa=14.91 degrees ! Estimated noise=534.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078655 Jy ! Component: 100 - total flux cleaned = 0.00133588 Jy ! Component: 150 - total flux cleaned = 0.00163788 Jy ! Component: 200 - total flux cleaned = 0.00187423 Jy ! Total flux subtracted in 200 components = 0.00187423 Jy ! Clean residual min=-0.001919 max=0.002297 Jy/beam ! Clean residual mean=-0.000002 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.112488 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.112488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068730Jy sigma=0.000764 ! Fit after self-cal, rms=0.068673Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068673Jy sigma=0.000764 ! Fit after self-cal, rms=0.067638Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.488 mas, bmaj=8.231 mas, bpa=14.88 degrees ! Estimated noise=534.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052529 Jy ! Component: 100 - total flux cleaned = 0.000570815 Jy ! Component: 150 - total flux cleaned = 0.000590773 Jy ! Component: 200 - total flux cleaned = 0.000623882 Jy ! Total flux subtracted in 200 components = 0.000623882 Jy ! Clean residual min=-0.001522 max=0.001882 Jy/beam ! Clean residual mean=0.000000 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.113112 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.113112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067626Jy sigma=0.000762 ! Fit after self-cal, rms=0.067611Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (43.5, -85.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128428 Jy ! Component: 100 - total flux cleaned = 0.00154825 Jy ! Component: 150 - total flux cleaned = 0.00166979 Jy ! Component: 200 - total flux cleaned = 0.00182591 Jy ! Total flux subtracted in 200 components = 0.00182591 Jy ! Clean residual min=-0.001373 max=0.001578 Jy/beam ! Clean residual mean=-0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.114938 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 0.114938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067565Jy sigma=0.000762 ! Fit after self-cal, rms=0.067563Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067563Jy sigma=0.000762 ! Fit after self-cal, rms=0.067521Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.494 mas, bmaj=8.23 mas, bpa=14.9 degrees ! Estimated noise=533.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549113 Jy ! Component: 100 - total flux cleaned = 0.000723911 Jy ! Component: 150 - total flux cleaned = 0.000854726 Jy ! Component: 200 - total flux cleaned = 0.000975139 Jy ! Total flux subtracted in 200 components = 0.000975139 Jy ! Clean residual min=-0.001329 max=0.001562 Jy/beam ! Clean residual mean=-0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.115913 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 165 components and 0.115913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067503Jy sigma=0.000761 ! Fit after self-cal, rms=0.067503Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.18498e-05 Jy ! Component: 100 - total flux cleaned = 0.000184966 Jy ! Component: 150 - total flux cleaned = 0.000271861 Jy ! Component: 200 - total flux cleaned = 0.000353065 Jy ! Total flux subtracted in 200 components = 0.000353065 Jy ! Clean residual min=-0.001311 max=0.001551 Jy/beam ! Clean residual mean=-0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.116266 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 174 components and 0.116266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067493Jy sigma=0.000761 ! Fit after self-cal, rms=0.067495Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067495Jy sigma=0.000761 ! Fit after self-cal, rms=0.067514Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.015 mas, bmaj=10.02 mas, bpa=0.8849 degrees ! Estimated noise=605.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000462622 Jy ! Component: 100 - total flux cleaned = 0.000702122 Jy ! Component: 150 - total flux cleaned = 0.000886855 Jy ! Component: 200 - total flux cleaned = 0.00103125 Jy ! Total flux subtracted in 200 components = 0.00103125 Jy ! Clean residual min=-0.001511 max=0.001575 Jy/beam ! Clean residual mean=-0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.117297 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 184 components and 0.117297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067509Jy sigma=0.000761 ! Fit after self-cal, rms=0.067509Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.15698e-05 Jy ! Component: 100 - total flux cleaned = 0.000173156 Jy ! Component: 150 - total flux cleaned = 0.000241036 Jy ! Component: 200 - total flux cleaned = 0.000282645 Jy ! Total flux subtracted in 200 components = 0.000282645 Jy ! Clean residual min=-0.001512 max=0.001530 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.11758 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 199 components and 0.11758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067506Jy sigma=0.000761 ! Fit after self-cal, rms=0.067507Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.499 mas, bmaj=8.235 mas, bpa=14.94 degrees ! Estimated noise=534.038 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.499 x 8.235 at 14.94 degrees (North through East) ! Clean map min=-0.0013178 max=0.06162 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=7.494 mas, bpa=15.69 degrees ! Estimated noise=820.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493678 Jy ! Component: 100 - total flux cleaned = 0.0706886 Jy ! Component: 150 - total flux cleaned = 0.0823498 Jy ! Component: 200 - total flux cleaned = 0.0895196 Jy ! Total flux subtracted in 200 components = 0.0895196 Jy ! Clean residual min=-0.002980 max=0.003871 Jy/beam ! Clean residual mean=0.000001 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0895196 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0895196 Jy ! Inverting map and beam ! Estimated beam: bmin=4.499 mas, bmaj=8.235 mas, bpa=14.94 degrees ! Estimated noise=534.038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660997 Jy ! Component: 100 - total flux cleaned = 0.0110772 Jy ! Component: 150 - total flux cleaned = 0.0143962 Jy ! Component: 200 - total flux cleaned = 0.0169201 Jy ! Total flux subtracted in 200 components = 0.0169201 Jy ! Clean residual min=-0.001903 max=0.001813 Jy/beam ! Clean residual mean=0.000001 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.10644 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 56 components and 0.10644 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.015 mas, bmaj=10.02 mas, bpa=0.8849 degrees ! Estimated noise=605.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272942 Jy ! Component: 100 - total flux cleaned = 0.00476612 Jy ! Component: 150 - total flux cleaned = 0.00601585 Jy ! Component: 200 - total flux cleaned = 0.00694265 Jy ! Total flux subtracted in 200 components = 0.00694265 Jy ! Clean residual min=-0.001666 max=0.001822 Jy/beam ! Clean residual mean=0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.113382 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820692 Jy ! Component: 100 - total flux cleaned = 0.00147049 Jy ! Component: 150 - total flux cleaned = 0.00186845 Jy ! Component: 200 - total flux cleaned = 0.00219378 Jy ! Total flux subtracted in 200 components = 0.00219378 Jy ! Clean residual min=-0.001604 max=0.001630 Jy/beam ! Clean residual mean=-0.000000 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.115576 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 126 components and 0.115576 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.499 mas, bmaj=8.235 mas, bpa=14.94 degrees ! Estimated noise=534.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154141 Jy ! Component: 100 - total flux cleaned = 6.17294e-05 Jy ! Component: 150 - total flux cleaned = 0.000301706 Jy ! Component: 200 - total flux cleaned = 0.00054212 Jy ! Total flux subtracted in 200 components = 0.00054212 Jy ! Clean residual min=-0.001416 max=0.001522 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.116118 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 150 components and 0.116118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067530Jy sigma=0.000761 ! Fit after self-cal, rms=0.067525Jy sigma=0.000761 wmodel J0106+2539_S_2014_08_05_pus_map.mod ! Writing 150 model components to file: J0106+2539_S_2014_08_05_pus_map.mod wobs J0106+2539_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0106+2539_S_2014_08_05_pus_uvs.fits wwins J0106+2539_S_2014_08_05_pus_map.win ! wwins: Wrote 4 windows to J0106+2539_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276629 Jy ! Component: 100 - total flux cleaned = 0.000422686 Jy ! Component: 150 - total flux cleaned = 0.000515544 Jy ! Component: 200 - total flux cleaned = 0.00056086 Jy ! Component: 250 - total flux cleaned = 0.000647436 Jy ! Component: 300 - total flux cleaned = 0.000626564 Jy ! Component: 350 - total flux cleaned = 0.00070877 Jy ! Component: 400 - total flux cleaned = 0.000748484 Jy ! Component: 450 - total flux cleaned = 0.000806693 Jy ! Component: 500 - total flux cleaned = 0.000806629 Jy ! Component: 550 - total flux cleaned = 0.000806574 Jy ! Component: 600 - total flux cleaned = 0.00087961 Jy ! Component: 650 - total flux cleaned = 0.000915421 Jy ! Component: 700 - total flux cleaned = 0.000933389 Jy ! Component: 750 - total flux cleaned = 0.00100231 Jy ! Component: 800 - total flux cleaned = 0.000985492 Jy ! Component: 850 - total flux cleaned = 0.00100224 Jy ! Component: 900 - total flux cleaned = 0.00101876 Jy ! Component: 950 - total flux cleaned = 0.0010508 Jy ! Component: 1000 - total flux cleaned = 0.00103516 Jy ! Component: 1050 - total flux cleaned = 0.00108194 Jy ! Component: 1100 - total flux cleaned = 0.0010666 Jy ! Component: 1150 - total flux cleaned = 0.00108179 Jy ! Component: 1200 - total flux cleaned = 0.00112613 Jy ! Component: 1250 - total flux cleaned = 0.00112608 Jy ! Component: 1300 - total flux cleaned = 0.00112624 Jy ! Component: 1350 - total flux cleaned = 0.00119732 Jy ! Component: 1400 - total flux cleaned = 0.00121128 Jy ! Component: 1450 - total flux cleaned = 0.00123878 Jy ! Component: 1500 - total flux cleaned = 0.00126613 Jy ! Component: 1550 - total flux cleaned = 0.00127971 Jy ! Component: 1600 - total flux cleaned = 0.00131976 Jy ! Component: 1650 - total flux cleaned = 0.00135912 Jy ! Component: 1700 - total flux cleaned = 0.00135904 Jy ! Component: 1750 - total flux cleaned = 0.00139708 Jy ! Component: 1800 - total flux cleaned = 0.00135942 Jy ! Component: 1850 - total flux cleaned = 0.00138453 Jy ! Component: 1900 - total flux cleaned = 0.00139694 Jy ! Component: 1950 - total flux cleaned = 0.00142137 Jy ! Component: 2000 - total flux cleaned = 0.00140915 Jy ! Component: 2050 - total flux cleaned = 0.00140909 Jy ! Component: 2100 - total flux cleaned = 0.00142096 Jy ! Component: 2150 - total flux cleaned = 0.00143275 Jy ! Component: 2200 - total flux cleaned = 0.00146739 Jy ! Component: 2250 - total flux cleaned = 0.00152447 Jy ! Component: 2300 - total flux cleaned = 0.00158092 Jy ! Component: 2350 - total flux cleaned = 0.00159195 Jy ! Component: 2400 - total flux cleaned = 0.00163617 Jy ! Component: 2450 - total flux cleaned = 0.00163621 Jy ! Component: 2500 - total flux cleaned = 0.00166869 Jy ! Component: 2550 - total flux cleaned = 0.00169017 Jy ! Component: 2600 - total flux cleaned = 0.0017435 Jy ! Component: 2650 - total flux cleaned = 0.00172219 Jy ! Component: 2700 - total flux cleaned = 0.00177455 Jy ! Component: 2750 - total flux cleaned = 0.00178475 Jy ! Component: 2800 - total flux cleaned = 0.00177443 Jy ! Component: 2850 - total flux cleaned = 0.00179471 Jy ! Component: 2900 - total flux cleaned = 0.0018047 Jy ! Component: 2950 - total flux cleaned = 0.00181465 Jy ! Component: 3000 - total flux cleaned = 0.00182448 Jy ! Component: 3050 - total flux cleaned = 0.00180475 Jy ! Component: 3100 - total flux cleaned = 0.00182443 Jy ! Component: 3150 - total flux cleaned = 0.00183423 Jy ! Component: 3200 - total flux cleaned = 0.00185342 Jy ! Component: 3250 - total flux cleaned = 0.00185341 Jy ! Component: 3300 - total flux cleaned = 0.00185346 Jy ! Component: 3350 - total flux cleaned = 0.00187228 Jy ! Component: 3400 - total flux cleaned = 0.00189095 Jy ! Component: 3450 - total flux cleaned = 0.00190032 Jy ! Component: 3500 - total flux cleaned = 0.00191858 Jy ! Component: 3550 - total flux cleaned = 0.00193678 Jy ! Component: 3600 - total flux cleaned = 0.00195477 Jy ! Component: 3650 - total flux cleaned = 0.00197275 Jy ! Component: 3700 - total flux cleaned = 0.00198169 Jy ! Component: 3750 - total flux cleaned = 0.00201701 Jy ! Component: 3800 - total flux cleaned = 0.00200831 Jy ! Component: 3850 - total flux cleaned = 0.00204312 Jy ! Component: 3900 - total flux cleaned = 0.0020516 Jy ! Component: 3950 - total flux cleaned = 0.00206869 Jy ! Component: 4000 - total flux cleaned = 0.0020433 Jy ! Component: 4050 - total flux cleaned = 0.00206025 Jy ! Total flux subtracted in 4096 components = 0.00207703 Jy ! Clean residual min=-0.000460 max=0.000546 Jy/beam ! Clean residual mean=-0.000002 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.118195 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 428 components and 0.118195 Jy ![Exited script file: muppet] wmap "J0106+2539_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.499 x 8.235 at 14.94 degrees (North through East) ! Clean map min=-0.00109 max=0.061307 Jy/beam ! Writing clean map to FITS file: J0106+2539_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0613066 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155487 device "J0106+2539_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0106+2539_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.760866 0.760866 1.52173 3.04346 6.08693 12.1739 24.3477 48.6954 97.3908 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.499 x 8.235 at 14.94 degrees (North through East) ! Clean map min=-0.00109 max=0.061307 Jy/beam quit ! Quitting program ! Log file J0106+2539_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:11:19 2016