! Started logfile: J0102+5824_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:40:19 2016 obs J0102+5824_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0102+5824_S_2014_06_09_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.506667 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 1368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0102+5824_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.556082Jy sigma=0.014074 ! Fit after self-cal, rms=1.547914Jy sigma=0.013997 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=9.318 mas, bpa=73.07 degrees ! Estimated noise=3052.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.82127 Jy ! Component: 100 - total flux cleaned = 2.24284 Jy ! Total flux subtracted in 100 components = 2.24284 Jy ! Clean residual min=-0.104364 max=0.163515 Jy/beam ! Clean residual mean=0.000376 rms=0.029387 Jy/beam ! Combined flux in latest and established models = 2.24284 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.24284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.455970Jy sigma=0.003927 ! Fit after self-cal, rms=0.455968Jy sigma=0.003927 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=11.37 mas, bpa=67.73 degrees ! Estimated noise=2090.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261432 Jy ! Component: 100 - total flux cleaned = 0.374384 Jy ! Component: 150 - total flux cleaned = 0.428451 Jy ! Component: 200 - total flux cleaned = 0.457583 Jy ! Total flux subtracted in 200 components = 0.457583 Jy ! Clean residual min=-0.052630 max=0.051870 Jy/beam ! Clean residual mean=-0.000119 rms=0.014426 Jy/beam ! Combined flux in latest and established models = 2.70042 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 46 components and 2.70042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279829Jy sigma=0.002481 ! Fit after self-cal, rms=0.279775Jy sigma=0.002480 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.00 KP 1.04 ! LA 1.19 MK 1.01 NL 0.97 OV 0.97 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.04 KP 1.01 ! LA 1.14 MK 1.01 NL 1.02 OV 1.00 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.03 KP 0.91 ! LA 0.91 MK 1.03 NL 0.98 OV 0.94 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.99 KP 0.88 ! LA 0.87 MK 1.00 NL 1.05 OV 0.99 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.279775Jy sigma=0.002480 ! Fit after self-cal, rms=0.085978Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=11.42 mas, bpa=67.68 degrees ! Estimated noise=2085.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032488 Jy ! Component: 100 - total flux cleaned = -0.00336837 Jy ! Component: 150 - total flux cleaned = -0.00326729 Jy ! Component: 200 - total flux cleaned = -0.00317789 Jy ! Total flux subtracted in 200 components = -0.00317789 Jy ! Clean residual min=-0.006081 max=0.006443 Jy/beam ! Clean residual mean=-0.000030 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 2.69724 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 2.69724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085454Jy sigma=0.000768 ! Fit after self-cal, rms=0.085439Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085439Jy sigma=0.000768 ! Fit after self-cal, rms=0.085380Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=11.42 mas, bpa=67.69 degrees ! Estimated noise=2086.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209927 Jy ! Component: 100 - total flux cleaned = -0.00217919 Jy ! Component: 150 - total flux cleaned = -0.0021831 Jy ! Component: 200 - total flux cleaned = -0.00212497 Jy ! Total flux subtracted in 200 components = -0.00212497 Jy ! Clean residual min=-0.005403 max=0.006104 Jy/beam ! Clean residual mean=-0.000030 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 2.69512 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 2.69512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085194Jy sigma=0.000765 ! Fit after self-cal, rms=0.085193Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.52787e-05 Jy ! Component: 100 - total flux cleaned = -3.38931e-05 Jy ! Component: 150 - total flux cleaned = 7.121e-06 Jy ! Component: 200 - total flux cleaned = 9.12655e-06 Jy ! Total flux subtracted in 200 components = 9.12655e-06 Jy ! Clean residual min=-0.005200 max=0.006158 Jy/beam ! Clean residual mean=-0.000030 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 2.69513 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 2.69513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085147Jy sigma=0.000765 ! Fit after self-cal, rms=0.085146Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085146Jy sigma=0.000765 ! Fit after self-cal, rms=0.085129Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=11.43 mas, bpa=67.7 degrees ! Estimated noise=2086.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142751 Jy ! Component: 100 - total flux cleaned = -0.00151775 Jy ! Component: 150 - total flux cleaned = -0.00152159 Jy ! Component: 200 - total flux cleaned = -0.00148921 Jy ! Total flux subtracted in 200 components = -0.00148921 Jy ! Clean residual min=-0.005008 max=0.006035 Jy/beam ! Clean residual mean=-0.000029 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 2.69364 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 2.69364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085073Jy sigma=0.000764 ! Fit after self-cal, rms=0.085073Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.78138e-05 Jy ! Component: 100 - total flux cleaned = -4.85644e-05 Jy ! Component: 150 - total flux cleaned = -2.25276e-05 Jy ! Component: 200 - total flux cleaned = 1.03634e-06 Jy ! Total flux subtracted in 200 components = 1.03634e-06 Jy ! Clean residual min=-0.004995 max=0.006029 Jy/beam ! Clean residual mean=-0.000029 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 2.69364 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 2.69364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085057Jy sigma=0.000764 ! Fit after self-cal, rms=0.085057Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085057Jy sigma=0.000764 ! Fit after self-cal, rms=0.085052Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.756 mas, bmaj=26.95 mas, bpa=53.25 degrees ! Estimated noise=2489.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011618 Jy ! Component: 100 - total flux cleaned = -0.00116412 Jy ! Component: 150 - total flux cleaned = -0.0011899 Jy ! Component: 200 - total flux cleaned = -0.00119044 Jy ! Total flux subtracted in 200 components = -0.00119044 Jy ! Clean residual min=-0.004754 max=0.005691 Jy/beam ! Clean residual mean=-0.000053 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 2.69245 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 74 components and 2.69245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085033Jy sigma=0.000764 ! Fit after self-cal, rms=0.085033Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.56372e-05 Jy ! Component: 100 - total flux cleaned = 2.44808e-05 Jy ! Component: 150 - total flux cleaned = 2.48743e-05 Jy ! Component: 200 - total flux cleaned = 2.58461e-05 Jy ! Total flux subtracted in 200 components = 2.58461e-05 Jy ! Clean residual min=-0.004764 max=0.005677 Jy/beam ! Clean residual mean=-0.000053 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 2.69247 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 74 components and 2.69247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085024Jy sigma=0.000764 ! Fit after self-cal, rms=0.085024Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=11.43 mas, bpa=67.7 degrees ! Estimated noise=2086.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.651 x 11.43 at 67.7 degrees (North through East) ! Clean map min=-0.0046692 max=2.4492 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085024Jy sigma=0.000764 ! Fit after self-cal, rms=0.076797Jy sigma=0.000685 ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=11.43 mas, bpa=67.71 degrees ! Estimated noise=2086.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000781855 Jy ! Component: 100 - total flux cleaned = -0.000807466 Jy ! Component: 150 - total flux cleaned = -0.000785058 Jy ! Component: 200 - total flux cleaned = -0.000765315 Jy ! Total flux subtracted in 200 components = -0.000765315 Jy ! Clean residual min=-0.004557 max=0.005700 Jy/beam ! Clean residual mean=-0.000024 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 2.69171 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 2.69171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076778Jy sigma=0.000685 ! Fit after self-cal, rms=0.076778Jy sigma=0.000685 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1685e-06 Jy ! Component: 100 - total flux cleaned = -1.61899e-05 Jy ! Component: 150 - total flux cleaned = -1.5129e-05 Jy ! Component: 200 - total flux cleaned = 1.42403e-06 Jy ! Total flux subtracted in 200 components = 1.42403e-06 Jy ! Clean residual min=-0.004560 max=0.005683 Jy/beam ! Clean residual mean=-0.000024 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 2.69171 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 85 components and 2.69171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076771Jy sigma=0.000685 ! Fit after self-cal, rms=0.076770Jy sigma=0.000685 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076770Jy sigma=0.000685 ! Fit after self-cal, rms=0.076769Jy sigma=0.000685 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=9.33 mas, bpa=73.14 degrees ! Estimated noise=3065.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.82905 Jy ! Component: 100 - total flux cleaned = 2.24764 Jy ! Component: 150 - total flux cleaned = 2.42455 Jy ! Component: 200 - total flux cleaned = 2.52435 Jy ! Total flux subtracted in 200 components = 2.52435 Jy ! Clean residual min=-0.026138 max=0.049574 Jy/beam ! Clean residual mean=0.000131 rms=0.008681 Jy/beam ! Combined flux in latest and established models = 2.52435 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 2.52435 Jy ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=11.43 mas, bpa=67.71 degrees ! Estimated noise=2086.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0837671 Jy ! Component: 100 - total flux cleaned = 0.121641 Jy ! Component: 150 - total flux cleaned = 0.141537 Jy ! Component: 200 - total flux cleaned = 0.152606 Jy ! Total flux subtracted in 200 components = 0.152606 Jy ! Clean residual min=-0.007064 max=0.006721 Jy/beam ! Clean residual mean=0.000002 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 2.67696 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 49 components and 2.67696 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.758 mas, bmaj=26.95 mas, bpa=53.26 degrees ! Estimated noise=2488.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00820136 Jy ! Component: 100 - total flux cleaned = 0.0113653 Jy ! Component: 150 - total flux cleaned = 0.0121439 Jy ! Component: 200 - total flux cleaned = 0.012296 Jy ! Total flux subtracted in 200 components = 0.012296 Jy ! Clean residual min=-0.005853 max=0.005868 Jy/beam ! Clean residual mean=-0.000041 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 2.68926 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.58141e-05 Jy ! Component: 100 - total flux cleaned = 0.000226544 Jy ! Component: 150 - total flux cleaned = 0.000309405 Jy ! Component: 200 - total flux cleaned = 0.000423277 Jy ! Total flux subtracted in 200 components = 0.000423277 Jy ! Clean residual min=-0.005770 max=0.005844 Jy/beam ! Clean residual mean=-0.000043 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 2.68968 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 2.68968 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=11.43 mas, bpa=67.71 degrees ! Estimated noise=2086.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350036 Jy ! Component: 100 - total flux cleaned = -0.000355373 Jy ! Component: 150 - total flux cleaned = -0.000240729 Jy ! Component: 200 - total flux cleaned = -9.10966e-05 Jy ! Total flux subtracted in 200 components = -9.10966e-05 Jy ! Clean residual min=-0.005838 max=0.006103 Jy/beam ! Clean residual mean=-0.000024 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 2.68959 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 2.68959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077046Jy sigma=0.000687 ! Fit after self-cal, rms=0.077038Jy sigma=0.000687 wmodel J0102+5824_S_2014_06_09_pus_map.mod ! Writing 73 model components to file: J0102+5824_S_2014_06_09_pus_map.mod wobs J0102+5824_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0102+5824_S_2014_06_09_pus_uvs.fits wwins J0102+5824_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J0102+5824_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000861531 Jy ! Component: 100 - total flux cleaned = 0.00131515 Jy ! Component: 150 - total flux cleaned = 0.00099872 Jy ! Component: 200 - total flux cleaned = 0.00107731 Jy ! Component: 250 - total flux cleaned = 0.00115255 Jy ! Component: 300 - total flux cleaned = 0.000954001 Jy ! Component: 350 - total flux cleaned = 0.000955311 Jy ! Component: 400 - total flux cleaned = 0.000954752 Jy ! Component: 450 - total flux cleaned = 0.00101472 Jy ! Component: 500 - total flux cleaned = 0.00101402 Jy ! Component: 550 - total flux cleaned = 0.00101432 Jy ! Component: 600 - total flux cleaned = 0.0008019 Jy ! Component: 650 - total flux cleaned = 0.000749868 Jy ! Component: 700 - total flux cleaned = 0.000597826 Jy ! Component: 750 - total flux cleaned = 0.000400085 Jy ! Component: 800 - total flux cleaned = 0.00010843 Jy ! Component: 850 - total flux cleaned = -0.000128752 Jy ! Component: 900 - total flux cleaned = -0.000268552 Jy ! Component: 950 - total flux cleaned = -0.00040483 Jy ! Component: 1000 - total flux cleaned = -0.000360711 Jy ! Component: 1050 - total flux cleaned = -0.000361326 Jy ! Component: 1100 - total flux cleaned = -0.000274317 Jy ! Component: 1150 - total flux cleaned = -0.000146205 Jy ! Component: 1200 - total flux cleaned = 2.23966e-05 Jy ! Component: 1250 - total flux cleaned = 0.000188928 Jy ! Component: 1300 - total flux cleaned = 0.000312868 Jy ! Component: 1350 - total flux cleaned = 0.000354033 Jy ! Component: 1400 - total flux cleaned = 0.000394637 Jy ! Component: 1450 - total flux cleaned = 0.000394769 Jy ! Component: 1500 - total flux cleaned = 0.000314139 Jy ! Component: 1550 - total flux cleaned = 0.00023357 Jy ! Component: 1600 - total flux cleaned = 0.000193592 Jy ! Component: 1650 - total flux cleaned = 7.32556e-05 Jy ! Component: 1700 - total flux cleaned = -6.97568e-06 Jy ! Component: 1750 - total flux cleaned = -7.19826e-06 Jy ! Component: 1800 - total flux cleaned = -8.76404e-05 Jy ! Component: 1850 - total flux cleaned = -8.79566e-05 Jy ! Component: 1900 - total flux cleaned = -0.000169899 Jy ! Component: 1950 - total flux cleaned = -0.000169545 Jy ! Component: 2000 - total flux cleaned = -0.000294407 Jy ! Component: 2050 - total flux cleaned = -0.000336417 Jy ! Component: 2100 - total flux cleaned = -0.00037836 Jy ! Component: 2150 - total flux cleaned = -0.000378551 Jy ! Component: 2200 - total flux cleaned = -0.000421473 Jy ! Component: 2250 - total flux cleaned = -0.000465403 Jy ! Component: 2300 - total flux cleaned = -0.000420976 Jy ! Component: 2350 - total flux cleaned = -0.000375403 Jy ! Component: 2400 - total flux cleaned = -0.000375411 Jy ! Component: 2450 - total flux cleaned = -0.00037553 Jy ! Component: 2500 - total flux cleaned = -0.000375421 Jy ! Component: 2550 - total flux cleaned = -0.000375664 Jy ! Component: 2600 - total flux cleaned = -0.000424063 Jy ! Component: 2650 - total flux cleaned = -0.000424479 Jy ! Component: 2700 - total flux cleaned = -0.000424071 Jy ! Component: 2750 - total flux cleaned = -0.000423978 Jy ! Component: 2800 - total flux cleaned = -0.000476034 Jy ! Component: 2850 - total flux cleaned = -0.000476219 Jy ! Component: 2900 - total flux cleaned = -0.000530318 Jy ! Component: 2950 - total flux cleaned = -0.000585721 Jy ! Component: 3000 - total flux cleaned = -0.000585764 Jy ! Component: 3050 - total flux cleaned = -0.000642063 Jy ! Component: 3100 - total flux cleaned = -0.000642176 Jy ! Component: 3150 - total flux cleaned = -0.000701085 Jy ! Component: 3200 - total flux cleaned = -0.000761145 Jy ! Component: 3250 - total flux cleaned = -0.000822397 Jy ! Component: 3300 - total flux cleaned = -0.000822652 Jy ! Component: 3350 - total flux cleaned = -0.000822972 Jy ! Component: 3400 - total flux cleaned = -0.000823352 Jy ! Component: 3450 - total flux cleaned = -0.000824223 Jy ! Component: 3500 - total flux cleaned = -0.000824258 Jy ! Component: 3550 - total flux cleaned = -0.000823375 Jy ! Component: 3600 - total flux cleaned = -0.000823461 Jy ! Component: 3650 - total flux cleaned = -0.000823596 Jy ! Component: 3700 - total flux cleaned = -0.00089711 Jy ! Component: 3750 - total flux cleaned = -0.000898158 Jy ! Component: 3800 - total flux cleaned = -0.000899012 Jy ! Component: 3850 - total flux cleaned = -0.000899976 Jy ! Component: 3900 - total flux cleaned = -0.000819238 Jy ! Component: 3950 - total flux cleaned = -0.000900005 Jy ! Component: 4000 - total flux cleaned = -0.000900007 Jy ! Component: 4050 - total flux cleaned = -0.000899385 Jy ! Total flux subtracted in 4096 components = -0.000898338 Jy ! Clean residual min=-0.005286 max=0.005083 Jy/beam ! Clean residual mean=0.000032 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 2.68869 Jy keep ! Adding 195 model components to the UV plane model. ! The established model now contains 268 components and 2.68869 Jy ![Exited script file: muppet] wmap "J0102+5824_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 11.43 at 67.71 degrees (North through East) ! Clean map min=-0.011563 max=2.4533 Jy/beam ! Writing clean map to FITS file: J0102+5824_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.45328 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.001524 device "J0102+5824_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0102+5824_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.186363 0.186363 0.372726 0.745451 1.4909 2.98181 5.96361 11.9272 23.8544 47.7089 95.4178 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.453 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 11.43 at 67.71 degrees (North through East) ! Clean map min=-0.011563 max=2.4533 Jy/beam quit ! Quitting program ! Log file J0102+5824_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:40:23 2016