! Started logfile: J0101-2831_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:51:00 2016
obs J0101-2831_S_2014_08_09_pus_uva.fits
! Reading UV FITS file: J0101-2831_S_2014_08_09_pus_uva.fits
! AN table 1: 123 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.768022 visibilities/baseline/integration-bin.
! Found source: J0101-2831
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 342 lines of history.
! 
! Reading 17004 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0101-2831_S_2014_08_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.848704Jy  sigma=0.007342
! Fit after  self-cal, rms=0.811601Jy  sigma=0.006998
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.984 mas, bmaj=14.11 mas, bpa=14.68 degrees
! Estimated noise=1012.93 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13611 Jy
! Component: 100  -  total flux cleaned = 0.189878 Jy
! Total flux subtracted in 100 components = 0.189878 Jy
! Clean residual min=-0.018415 max=0.042904 Jy/beam
! Clean residual mean=0.000029 rms=0.007015 Jy/beam
! Combined flux in latest and established models = 0.189877 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.189877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152479Jy  sigma=0.001331
! Fit after  self-cal, rms=0.152213Jy  sigma=0.001330
! Inverting map 
! Added new window around map position (13.5, 5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0440324 Jy
! Component: 100  -  total flux cleaned = 0.0746115 Jy
! Total flux subtracted in 100 components = 0.0746115 Jy
! Clean residual min=-0.016304 max=0.026068 Jy/beam
! Clean residual mean=0.000024 rms=0.005153 Jy/beam
! Combined flux in latest and established models = 0.264489 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 45 components and 0.264489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131061Jy  sigma=0.001116
! Fit after  self-cal, rms=0.129259Jy  sigma=0.001100
! Inverting map 
! Added new window around map position (6.5, 3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311117 Jy
! Component: 100  -  total flux cleaned = 0.05194 Jy
! Total flux subtracted in 100 components = 0.05194 Jy
! Clean residual min=-0.014365 max=0.019324 Jy/beam
! Clean residual mean=0.000018 rms=0.003756 Jy/beam
! Combined flux in latest and established models = 0.316429 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 77 components and 0.316429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116869Jy  sigma=0.000975
! Fit after  self-cal, rms=0.115746Jy  sigma=0.000964
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.832 mas, bmaj=15.9 mas, bpa=12.91 degrees
! Estimated noise=626.603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0325882 Jy
! Component: 100  -  total flux cleaned = 0.0543247 Jy
! Component: 150  -  total flux cleaned = 0.0698001 Jy
! Component: 200  -  total flux cleaned = 0.0810126 Jy
! Total flux subtracted in 200 components = 0.0810126 Jy
! Clean residual min=-0.011295 max=0.016104 Jy/beam
! Clean residual mean=-0.000016 rms=0.002797 Jy/beam
! Combined flux in latest and established models = 0.397442 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 130 components and 0.397442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104543Jy  sigma=0.000853
! Fit after  self-cal, rms=0.103698Jy  sigma=0.000845
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.84     HN        1.03     KP        1.02     
!   LA        1.10     MK        1.00*    NL        1.00     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.15     KP        0.97     
!   LA        1.09     MK        1.00*    NL        1.02     OV        1.04     
!   PT        0.94     SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.15     HN        1.16     KP        0.87     
!   LA        0.85     MK        1.00*    NL        1.02     OV        0.97     
!   PT        0.94     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.12     KP        0.86     
!   LA        0.81     MK        1.00*    NL        1.10     OV        1.08     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.103698Jy  sigma=0.000845
! Fit after  self-cal, rms=0.099933Jy  sigma=0.000805
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.88 mas, bmaj=16.25 mas, bpa=13.11 degrees
! Estimated noise=623.986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00691235 Jy
! Component: 100  -  total flux cleaned = 0.00790297 Jy
! Component: 150  -  total flux cleaned = 0.00816262 Jy
! Component: 200  -  total flux cleaned = 0.00866963 Jy
! Total flux subtracted in 200 components = 0.00866963 Jy
! Clean residual min=-0.006769 max=0.009366 Jy/beam
! Clean residual mean=-0.000019 rms=0.001715 Jy/beam
! Combined flux in latest and established models = 0.406111 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 158 components and 0.406111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099074Jy  sigma=0.000796
! Fit after  self-cal, rms=0.098795Jy  sigma=0.000793
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098795Jy  sigma=0.000793
! Fit after  self-cal, rms=0.099734Jy  sigma=0.000791
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.888 mas, bmaj=16.32 mas, bpa=13.1 degrees
! Estimated noise=626.517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277041 Jy
! Component: 100  -  total flux cleaned = 0.00334727 Jy
! Component: 150  -  total flux cleaned = 0.00388366 Jy
! Component: 200  -  total flux cleaned = 0.0038922 Jy
! Total flux subtracted in 200 components = 0.0038922 Jy
! Clean residual min=-0.005989 max=0.007510 Jy/beam
! Clean residual mean=-0.000011 rms=0.001394 Jy/beam
! Combined flux in latest and established models = 0.410003 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 173 components and 0.410003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099275Jy  sigma=0.000787
! Fit after  self-cal, rms=0.099108Jy  sigma=0.000786
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016432 Jy
! Component: 100  -  total flux cleaned = 0.00197814 Jy
! Component: 150  -  total flux cleaned = 0.00234484 Jy
! Component: 200  -  total flux cleaned = 0.00249588 Jy
! Total flux subtracted in 200 components = 0.00249588 Jy
! Clean residual min=-0.005624 max=0.006057 Jy/beam
! Clean residual mean=-0.000010 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 0.412499 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 198 components and 0.412499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098831Jy  sigma=0.000784
! Fit after  self-cal, rms=0.098733Jy  sigma=0.000783
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098733Jy  sigma=0.000783
! Fit after  self-cal, rms=0.099621Jy  sigma=0.000781
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.898 mas, bmaj=16.35 mas, bpa=13.07 degrees
! Estimated noise=627.128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280318 Jy
! Component: 100  -  total flux cleaned = 0.00066134 Jy
! Component: 150  -  total flux cleaned = 0.000747787 Jy
! Component: 200  -  total flux cleaned = 0.000877458 Jy
! Total flux subtracted in 200 components = 0.000877458 Jy
! Clean residual min=-0.004580 max=0.005079 Jy/beam
! Clean residual mean=-0.000004 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.413377 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 215 components and 0.413377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099419Jy  sigma=0.000779
! Fit after  self-cal, rms=0.099369Jy  sigma=0.000778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000593033 Jy
! Component: 100  -  total flux cleaned = 0.000905493 Jy
! Component: 150  -  total flux cleaned = 0.00116216 Jy
! Component: 200  -  total flux cleaned = 0.00127927 Jy
! Total flux subtracted in 200 components = 0.00127927 Jy
! Clean residual min=-0.004370 max=0.004434 Jy/beam
! Clean residual mean=-0.000004 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.414656 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 230 components and 0.414656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099233Jy  sigma=0.000777
! Fit after  self-cal, rms=0.099190Jy  sigma=0.000777
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099190Jy  sigma=0.000777
! Fit after  self-cal, rms=0.099686Jy  sigma=0.000777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.332 mas, bmaj=23.45 mas, bpa=2.939 degrees
! Estimated noise=695.963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108909 Jy
! Component: 100  -  total flux cleaned = 0.00117457 Jy
! Component: 150  -  total flux cleaned = 0.00107748 Jy
! Component: 200  -  total flux cleaned = 0.000997853 Jy
! Total flux subtracted in 200 components = 0.000997853 Jy
! Clean residual min=-0.003678 max=0.004819 Jy/beam
! Clean residual mean=-0.000002 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.415654 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 254 components and 0.415654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099623Jy  sigma=0.000776
! Fit after  self-cal, rms=0.099604Jy  sigma=0.000776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000393733 Jy
! Component: 100  -  total flux cleaned = 0.000701794 Jy
! Component: 150  -  total flux cleaned = 0.000705157 Jy
! Component: 200  -  total flux cleaned = 0.000702846 Jy
! Total flux subtracted in 200 components = 0.000702846 Jy
! Clean residual min=-0.003572 max=0.004219 Jy/beam
! Clean residual mean=-0.000001 rms=0.000969 Jy/beam
! Combined flux in latest and established models = 0.416357 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 264 components and 0.416357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099548Jy  sigma=0.000776
! Fit after  self-cal, rms=0.099531Jy  sigma=0.000776
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=16.39 mas, bpa=13.11 degrees
! Estimated noise=626.996 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 16.39 at 13.11 degrees (North through East)
! Clean map  min=-0.0036217  max=0.17178 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.996 mas, bmaj=14.53 mas, bpa=14.9 degrees
! Estimated noise=1031.49 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138739 Jy
! Component: 100  -  total flux cleaned = 0.207267 Jy
! Component: 150  -  total flux cleaned = 0.254654 Jy
! Component: 200  -  total flux cleaned = 0.288572 Jy
! Total flux subtracted in 200 components = 0.288572 Jy
! Clean residual min=-0.009128 max=0.019113 Jy/beam
! Clean residual mean=0.000008 rms=0.003777 Jy/beam
! Combined flux in latest and established models = 0.288572 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.288572 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=16.39 mas, bpa=13.11 degrees
! Estimated noise=626.996 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0396727 Jy
! Component: 100  -  total flux cleaned = 0.0645152 Jy
! Component: 150  -  total flux cleaned = 0.0814518 Jy
! Component: 200  -  total flux cleaned = 0.0933805 Jy
! Total flux subtracted in 200 components = 0.0933805 Jy
! Clean residual min=-0.004655 max=0.007029 Jy/beam
! Clean residual mean=-0.000023 rms=0.001721 Jy/beam
! Combined flux in latest and established models = 0.381952 Jy
! Adding 93 model components to the UV plane model.
! The established model now contains 141 components and 0.381952 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.332 mas, bmaj=23.45 mas, bpa=2.939 degrees
! Estimated noise=695.963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121767 Jy
! Component: 100  -  total flux cleaned = 0.0195967 Jy
! Component: 150  -  total flux cleaned = 0.0243664 Jy
! Component: 200  -  total flux cleaned = 0.0275523 Jy
! Total flux subtracted in 200 components = 0.0275523 Jy
! Clean residual min=-0.003846 max=0.004822 Jy/beam
! Clean residual mean=-0.000009 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.409504 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307394 Jy
! Component: 100  -  total flux cleaned = 0.00374069 Jy
! Component: 150  -  total flux cleaned = 0.00465942 Jy
! Component: 200  -  total flux cleaned = 0.00543685 Jy
! Total flux subtracted in 200 components = 0.00543685 Jy
! Clean residual min=-0.002809 max=0.002713 Jy/beam
! Clean residual mean=-0.000005 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.414941 Jy
! Adding 138 model components to the UV plane model.
! The established model now contains 265 components and 0.414941 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=16.39 mas, bpa=13.11 degrees
! Estimated noise=626.996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111519 Jy
! Component: 100  -  total flux cleaned = 0.00138386 Jy
! Component: 150  -  total flux cleaned = 0.00177913 Jy
! Component: 200  -  total flux cleaned = 0.00213826 Jy
! Total flux subtracted in 200 components = 0.00213826 Jy
! Clean residual min=-0.002303 max=0.002720 Jy/beam
! Clean residual mean=-0.000001 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.417079 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 292 components and 0.417079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099178Jy  sigma=0.000773
! Fit after  self-cal, rms=0.099136Jy  sigma=0.000773
wmodel J0101-2831_S_2014_08_09_pus_map.mod
! Writing 292 model components to file: J0101-2831_S_2014_08_09_pus_map.mod
wobs J0101-2831_S_2014_08_09_pus_uvs.fits
! Writing UV FITS file: J0101-2831_S_2014_08_09_pus_uvs.fits
wwins J0101-2831_S_2014_08_09_pus_map.win
! wwins: Wrote 4 windows to J0101-2831_S_2014_08_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208479 Jy
! Component: 100  -  total flux cleaned = 0.000326207 Jy
! Component: 150  -  total flux cleaned = 0.000111202 Jy
! Component: 200  -  total flux cleaned = -0.000196297 Jy
! Component: 250  -  total flux cleaned = -0.000457565 Jy
! Component: 300  -  total flux cleaned = -0.000647032 Jy
! Component: 350  -  total flux cleaned = -0.000893603 Jy
! Component: 400  -  total flux cleaned = -0.00116466 Jy
! Component: 450  -  total flux cleaned = -0.00142932 Jy
! Component: 500  -  total flux cleaned = -0.00171806 Jy
! Component: 550  -  total flux cleaned = -0.00200066 Jy
! Component: 600  -  total flux cleaned = -0.00235981 Jy
! Component: 650  -  total flux cleaned = -0.00252229 Jy
! Component: 700  -  total flux cleaned = -0.00278886 Jy
! Component: 750  -  total flux cleaned = -0.00307635 Jy
! Component: 800  -  total flux cleaned = -0.00328126 Jy
! Component: 850  -  total flux cleaned = -0.00340761 Jy
! Component: 900  -  total flux cleaned = -0.00355589 Jy
! Component: 950  -  total flux cleaned = -0.00375062 Jy
! Component: 1000  -  total flux cleaned = -0.00387034 Jy
! Component: 1050  -  total flux cleaned = -0.003988 Jy
! Component: 1100  -  total flux cleaned = -0.00408106 Jy
! Component: 1150  -  total flux cleaned = -0.00417256 Jy
! Component: 1200  -  total flux cleaned = -0.00426282 Jy
! Component: 1250  -  total flux cleaned = -0.00441713 Jy
! Component: 1300  -  total flux cleaned = -0.00443881 Jy
! Component: 1350  -  total flux cleaned = -0.00450352 Jy
! Component: 1400  -  total flux cleaned = -0.00460957 Jy
! Component: 1450  -  total flux cleaned = -0.00469281 Jy
! Component: 1500  -  total flux cleaned = -0.00481646 Jy
! Component: 1550  -  total flux cleaned = -0.00493858 Jy
! Component: 1600  -  total flux cleaned = -0.00497859 Jy
! Component: 1650  -  total flux cleaned = -0.0049986 Jy
! Component: 1700  -  total flux cleaned = -0.00511653 Jy
! Component: 1750  -  total flux cleaned = -0.00519396 Jy
! Component: 1800  -  total flux cleaned = -0.00530842 Jy
! Component: 1850  -  total flux cleaned = -0.00528968 Jy
! Component: 1900  -  total flux cleaned = -0.00536471 Jy
! Component: 1950  -  total flux cleaned = -0.0054383 Jy
! Component: 2000  -  total flux cleaned = -0.00551119 Jy
! Component: 2050  -  total flux cleaned = -0.00552948 Jy
! Component: 2100  -  total flux cleaned = -0.00558294 Jy
! Component: 2150  -  total flux cleaned = -0.00560092 Jy
! Component: 2200  -  total flux cleaned = -0.00560081 Jy
! Component: 2250  -  total flux cleaned = -0.00561802 Jy
! Component: 2300  -  total flux cleaned = -0.00565212 Jy
! Component: 2350  -  total flux cleaned = -0.00561827 Jy
! Component: 2400  -  total flux cleaned = -0.00570204 Jy
! Component: 2450  -  total flux cleaned = -0.0057351 Jy
! Component: 2500  -  total flux cleaned = -0.00573504 Jy
! Component: 2550  -  total flux cleaned = -0.00580022 Jy
! Component: 2600  -  total flux cleaned = -0.00584846 Jy
! Component: 2650  -  total flux cleaned = -0.00586443 Jy
! Component: 2700  -  total flux cleaned = -0.00589629 Jy
! Component: 2750  -  total flux cleaned = -0.0059594 Jy
! Component: 2800  -  total flux cleaned = -0.00595914 Jy
! Component: 2850  -  total flux cleaned = -0.00599015 Jy
! Component: 2900  -  total flux cleaned = -0.00606657 Jy
! Component: 2950  -  total flux cleaned = -0.00606651 Jy
! Component: 3000  -  total flux cleaned = -0.00614161 Jy
! Component: 3050  -  total flux cleaned = -0.00615646 Jy
! Component: 3100  -  total flux cleaned = -0.00620071 Jy
! Component: 3150  -  total flux cleaned = -0.00627377 Jy
! Component: 3200  -  total flux cleaned = -0.00627349 Jy
! Component: 3250  -  total flux cleaned = -0.00628792 Jy
! Component: 3300  -  total flux cleaned = -0.00631657 Jy
! Component: 3350  -  total flux cleaned = -0.00640198 Jy
! Component: 3400  -  total flux cleaned = -0.00645828 Jy
! Component: 3450  -  total flux cleaned = -0.00654203 Jy
! Component: 3500  -  total flux cleaned = -0.00658354 Jy
! Component: 3550  -  total flux cleaned = -0.00661105 Jy
! Component: 3600  -  total flux cleaned = -0.00669278 Jy
! Component: 3650  -  total flux cleaned = -0.00674677 Jy
! Component: 3700  -  total flux cleaned = -0.00680036 Jy
! Component: 3750  -  total flux cleaned = -0.00686699 Jy
! Component: 3800  -  total flux cleaned = -0.00694588 Jy
! Component: 3850  -  total flux cleaned = -0.00698496 Jy
! Component: 3900  -  total flux cleaned = -0.00701108 Jy
! Component: 3950  -  total flux cleaned = -0.00703678 Jy
! Component: 4000  -  total flux cleaned = -0.00713895 Jy
! Component: 4050  -  total flux cleaned = -0.00705007 Jy
! Total flux subtracted in 4096 components = -0.00712549 Jy
! Clean residual min=-0.000627 max=0.000937 Jy/beam
! Clean residual mean=-0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.409954 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 588 components and 0.409954 Jy
![Exited script file: muppet]
wmap "J0101-2831_S_2014_08_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 16.39 at 13.11 degrees (North through East)
! Clean map  min=-0.0027607  max=0.16791 Jy/beam
! Writing clean map to FITS file: J0101-2831_S_2014_08_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.167915 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000254851 
device "J0101-2831_S_2014_08_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0101-2831_S_2014_08_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.455323 0.455323 0.910646 1.82129 3.64258 7.28517 14.5703 29.1407 58.2813
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.167 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 16.39 at 13.11 degrees (North through East)
! Clean map  min=-0.0027607  max=0.16791 Jy/beam
quit
! Quitting program
! Log file J0101-2831_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:51:07 2016