! Started logfile: J0059+5812_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:13:08 2017 obs J0059+5812_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0059+5812_S_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.499141 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0059+5812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0059+5812_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884652Jy sigma=0.012925 ! Fit after self-cal, rms=0.838767Jy sigma=0.012297 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=3.935 mas, bpa=-62.89 degrees ! Estimated noise=1052.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122344 Jy ! Component: 100 - total flux cleaned = 0.151392 Jy ! Total flux subtracted in 100 components = 0.151392 Jy ! Clean residual min=-0.006756 max=0.010856 Jy/beam ! Clean residual mean=0.000027 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.151392 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.151392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080312Jy sigma=0.000961 ! Fit after self-cal, rms=0.080329Jy sigma=0.000961 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=4.92 mas, bpa=-62.06 degrees ! Estimated noise=622.014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143587 Jy ! Component: 100 - total flux cleaned = 0.0201333 Jy ! Component: 150 - total flux cleaned = 0.022916 Jy ! Component: 200 - total flux cleaned = 0.0244007 Jy ! Total flux subtracted in 200 components = 0.0244007 Jy ! Clean residual min=-0.004979 max=0.005585 Jy/beam ! Clean residual mean=0.000044 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.175793 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 19 components and 0.175793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077489Jy sigma=0.000934 ! Fit after self-cal, rms=0.077494Jy sigma=0.000934 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.04 ! MK 1.00 NL 0.97 OV 0.98 PT 1.03 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.99 ! MK 1.04 NL 1.03 OV 0.96 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.82 ! MK 1.06 NL 1.00 OV 0.89 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.86 ! MK 1.01 NL 1.06 OV 0.97 PT 1.00 ! SC 0.89 ! ! ! Fit before self-cal, rms=0.077494Jy sigma=0.000934 ! Fit after self-cal, rms=0.072357Jy sigma=0.000897 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=4.888 mas, bpa=-62.59 degrees ! Estimated noise=620.233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286811 Jy ! Component: 100 - total flux cleaned = 0.000494652 Jy ! Component: 150 - total flux cleaned = 0.000413685 Jy ! Component: 200 - total flux cleaned = 0.000340071 Jy ! Total flux subtracted in 200 components = 0.000340071 Jy ! Clean residual min=-0.002429 max=0.003113 Jy/beam ! Clean residual mean=0.000018 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.176133 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.176133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072312Jy sigma=0.000897 ! Fit after self-cal, rms=0.071979Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071979Jy sigma=0.000896 ! Fit after self-cal, rms=0.071893Jy sigma=0.000895 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=4.89 mas, bpa=-62.18 degrees ! Estimated noise=619.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348257 Jy ! Component: 100 - total flux cleaned = 0.000322524 Jy ! Component: 150 - total flux cleaned = 0.000303726 Jy ! Component: 200 - total flux cleaned = 0.000287768 Jy ! Total flux subtracted in 200 components = 0.000287768 Jy ! Clean residual min=-0.002390 max=0.002854 Jy/beam ! Clean residual mean=0.000015 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.17642 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.17642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071873Jy sigma=0.000895 ! Fit after self-cal, rms=0.071875Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268047 Jy ! Component: 100 - total flux cleaned = 0.00411758 Jy ! Component: 150 - total flux cleaned = 0.00498177 Jy ! Component: 200 - total flux cleaned = 0.00535789 Jy ! Total flux subtracted in 200 components = 0.00535789 Jy ! Clean residual min=-0.002044 max=0.002171 Jy/beam ! Clean residual mean=0.000007 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.181778 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.181778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071752Jy sigma=0.000893 ! Fit after self-cal, rms=0.071741Jy sigma=0.000893 ! Inverting map ! Added new window around map position (-14, 67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074525 Jy ! Component: 100 - total flux cleaned = 0.00054849 Jy ! Component: 150 - total flux cleaned = 0.000733652 Jy ! Component: 200 - total flux cleaned = 0.000999526 Jy ! Total flux subtracted in 200 components = 0.000999526 Jy ! Clean residual min=-0.001829 max=0.001664 Jy/beam ! Clean residual mean=0.000006 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.182778 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.182778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071658Jy sigma=0.000892 ! Fit after self-cal, rms=0.071661Jy sigma=0.000892 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071661Jy sigma=0.000892 ! Fit after self-cal, rms=0.071527Jy sigma=0.000892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=4.884 mas, bpa=-62.25 degrees ! Estimated noise=618.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736876 Jy ! Component: 100 - total flux cleaned = 0.000961604 Jy ! Component: 150 - total flux cleaned = 0.00130037 Jy ! Component: 200 - total flux cleaned = 0.00163066 Jy ! Total flux subtracted in 200 components = 0.00163066 Jy ! Clean residual min=-0.001735 max=0.001639 Jy/beam ! Clean residual mean=0.000002 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.184409 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.184409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071494Jy sigma=0.000892 ! Fit after self-cal, rms=0.071506Jy sigma=0.000892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261829 Jy ! Component: 100 - total flux cleaned = 0.000470771 Jy ! Component: 150 - total flux cleaned = 0.000647447 Jy ! Component: 200 - total flux cleaned = 0.000795741 Jy ! Total flux subtracted in 200 components = 0.000795741 Jy ! Clean residual min=-0.001701 max=0.001635 Jy/beam ! Clean residual mean=0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.185204 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.185204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071489Jy sigma=0.000891 ! Fit after self-cal, rms=0.071492Jy sigma=0.000891 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071492Jy sigma=0.000891 ! Fit after self-cal, rms=0.071484Jy sigma=0.000891 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.649 mas, bmaj=8.7 mas, bpa=-74.04 degrees ! Estimated noise=717.875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590121 Jy ! Component: 100 - total flux cleaned = 0.000945759 Jy ! Component: 150 - total flux cleaned = 0.00123211 Jy ! Component: 200 - total flux cleaned = 0.0014477 Jy ! Total flux subtracted in 200 components = 0.0014477 Jy ! Clean residual min=-0.001444 max=0.001295 Jy/beam ! Clean residual mean=-0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.186652 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.186652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071481Jy sigma=0.000891 ! Fit after self-cal, rms=0.071484Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298866 Jy ! Component: 100 - total flux cleaned = 0.000521986 Jy ! Component: 150 - total flux cleaned = 0.000718735 Jy ! Component: 200 - total flux cleaned = 0.000903089 Jy ! Total flux subtracted in 200 components = 0.000903089 Jy ! Clean residual min=-0.001383 max=0.001325 Jy/beam ! Clean residual mean=-0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.187555 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 126 components and 0.187555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071482Jy sigma=0.000891 ! Fit after self-cal, rms=0.071481Jy sigma=0.000891 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=4.882 mas, bpa=-62.36 degrees ! Estimated noise=618.423 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 4.882 at -62.36 degrees (North through East) ! Clean map min=-0.0015386 max=0.15992 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=3.888 mas, bpa=-63.3 degrees ! Estimated noise=1048.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121718 Jy ! Component: 100 - total flux cleaned = 0.151442 Jy ! Component: 150 - total flux cleaned = 0.163681 Jy ! Component: 200 - total flux cleaned = 0.168613 Jy ! Total flux subtracted in 200 components = 0.168613 Jy ! Clean residual min=-0.003408 max=0.003575 Jy/beam ! Clean residual mean=0.000009 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.168613 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.168613 Jy ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=4.882 mas, bpa=-62.36 degrees ! Estimated noise=618.423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438327 Jy ! Component: 100 - total flux cleaned = 0.00699545 Jy ! Component: 150 - total flux cleaned = 0.00847958 Jy ! Component: 200 - total flux cleaned = 0.00960652 Jy ! Total flux subtracted in 200 components = 0.00960652 Jy ! Clean residual min=-0.002176 max=0.001853 Jy/beam ! Clean residual mean=0.000011 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.178219 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.178219 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.649 mas, bmaj=8.7 mas, bpa=-74.04 degrees ! Estimated noise=717.875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193914 Jy ! Component: 100 - total flux cleaned = 0.00288847 Jy ! Component: 150 - total flux cleaned = 0.00355633 Jy ! Component: 200 - total flux cleaned = 0.00410189 Jy ! Total flux subtracted in 200 components = 0.00410189 Jy ! Clean residual min=-0.001936 max=0.001444 Jy/beam ! Clean residual mean=0.000008 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.182321 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559928 Jy ! Component: 100 - total flux cleaned = 0.00104954 Jy ! Component: 150 - total flux cleaned = 0.00147914 Jy ! Component: 200 - total flux cleaned = 0.00185639 Jy ! Total flux subtracted in 200 components = 0.00185639 Jy ! Clean residual min=-0.001714 max=0.001405 Jy/beam ! Clean residual mean=0.000003 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.184178 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 79 components and 0.184178 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=4.882 mas, bpa=-62.36 degrees ! Estimated noise=618.423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366859 Jy ! Component: 100 - total flux cleaned = 0.000783129 Jy ! Component: 150 - total flux cleaned = 0.00106437 Jy ! Component: 200 - total flux cleaned = 0.00129495 Jy ! Total flux subtracted in 200 components = 0.00129495 Jy ! Clean residual min=-0.001696 max=0.001617 Jy/beam ! Clean residual mean=0.000000 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.185472 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 0.185472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071506Jy sigma=0.000891 ! Fit after self-cal, rms=0.071500Jy sigma=0.000891 wmodel J0059+5812_S_2014_01_04_pus_map.mod ! Writing 98 model components to file: J0059+5812_S_2014_01_04_pus_map.mod wobs J0059+5812_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0059+5812_S_2014_01_04_pus_uvs.fits wwins J0059+5812_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0059+5812_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221397 Jy ! Component: 100 - total flux cleaned = -0.00036289 Jy ! Component: 150 - total flux cleaned = -0.000390037 Jy ! Component: 200 - total flux cleaned = -0.000464597 Jy ! Component: 250 - total flux cleaned = -0.000464783 Jy ! Component: 300 - total flux cleaned = -0.000511224 Jy ! Component: 350 - total flux cleaned = -0.000533805 Jy ! Component: 400 - total flux cleaned = -0.000599615 Jy ! Component: 450 - total flux cleaned = -0.000641456 Jy ! Component: 500 - total flux cleaned = -0.000702655 Jy ! Component: 550 - total flux cleaned = -0.000782808 Jy ! Component: 600 - total flux cleaned = -0.000880439 Jy ! Component: 650 - total flux cleaned = -0.000956566 Jy ! Component: 700 - total flux cleaned = -0.000993995 Jy ! Component: 750 - total flux cleaned = -0.00108576 Jy ! Component: 800 - total flux cleaned = -0.00113963 Jy ! Component: 850 - total flux cleaned = -0.00115712 Jy ! Component: 900 - total flux cleaned = -0.00120856 Jy ! Component: 950 - total flux cleaned = -0.00122543 Jy ! Component: 1000 - total flux cleaned = -0.00129199 Jy ! Component: 1050 - total flux cleaned = -0.00135695 Jy ! Component: 1100 - total flux cleaned = -0.00138913 Jy ! Component: 1150 - total flux cleaned = -0.00143636 Jy ! Component: 1200 - total flux cleaned = -0.00148276 Jy ! Component: 1250 - total flux cleaned = -0.00149795 Jy ! Component: 1300 - total flux cleaned = -0.001498 Jy ! Component: 1350 - total flux cleaned = -0.0014981 Jy ! Component: 1400 - total flux cleaned = -0.00154161 Jy ! Component: 1450 - total flux cleaned = -0.00148477 Jy ! Component: 1500 - total flux cleaned = -0.00151289 Jy ! Component: 1550 - total flux cleaned = -0.00149873 Jy ! Component: 1600 - total flux cleaned = -0.00148488 Jy ! Component: 1650 - total flux cleaned = -0.00149833 Jy ! Component: 1700 - total flux cleaned = -0.00148493 Jy ! Component: 1750 - total flux cleaned = -0.00147185 Jy ! Component: 1800 - total flux cleaned = -0.00147173 Jy ! Component: 1850 - total flux cleaned = -0.00147171 Jy ! Component: 1900 - total flux cleaned = -0.00144626 Jy ! Component: 1950 - total flux cleaned = -0.0014713 Jy ! Component: 2000 - total flux cleaned = -0.00142131 Jy ! Component: 2050 - total flux cleaned = -0.00144593 Jy ! Component: 2100 - total flux cleaned = -0.00143362 Jy ! Component: 2150 - total flux cleaned = -0.00144571 Jy ! Component: 2200 - total flux cleaned = -0.00144559 Jy ! Component: 2250 - total flux cleaned = -0.00142148 Jy ! Component: 2300 - total flux cleaned = -0.0013741 Jy ! Component: 2350 - total flux cleaned = -0.00135067 Jy ! Component: 2400 - total flux cleaned = -0.00132753 Jy ! Component: 2450 - total flux cleaned = -0.00129293 Jy ! Component: 2500 - total flux cleaned = -0.00127004 Jy ! Component: 2550 - total flux cleaned = -0.00122463 Jy ! Component: 2600 - total flux cleaned = -0.00122464 Jy ! Component: 2650 - total flux cleaned = -0.00117988 Jy ! Component: 2700 - total flux cleaned = -0.00120216 Jy ! Component: 2750 - total flux cleaned = -0.00116906 Jy ! Component: 2800 - total flux cleaned = -0.00115805 Jy ! Component: 2850 - total flux cleaned = -0.00113617 Jy ! Component: 2900 - total flux cleaned = -0.00110369 Jy ! Component: 2950 - total flux cleaned = -0.00110364 Jy ! Component: 3000 - total flux cleaned = -0.00110356 Jy ! Component: 3050 - total flux cleaned = -0.00111408 Jy ! Component: 3100 - total flux cleaned = -0.00104012 Jy ! Component: 3150 - total flux cleaned = -0.0010927 Jy ! Component: 3200 - total flux cleaned = -0.00109271 Jy ! Component: 3250 - total flux cleaned = -0.00106162 Jy ! Component: 3300 - total flux cleaned = -0.00108236 Jy ! Component: 3350 - total flux cleaned = -0.00112355 Jy ! Component: 3400 - total flux cleaned = -0.00109288 Jy ! Component: 3450 - total flux cleaned = -0.00114393 Jy ! Component: 3500 - total flux cleaned = -0.00118456 Jy ! Component: 3550 - total flux cleaned = -0.00117444 Jy ! Component: 3600 - total flux cleaned = -0.00124483 Jy ! Component: 3650 - total flux cleaned = -0.00124475 Jy ! Component: 3700 - total flux cleaned = -0.00124473 Jy ! Component: 3750 - total flux cleaned = -0.00128452 Jy ! Component: 3800 - total flux cleaned = -0.0012845 Jy ! Component: 3850 - total flux cleaned = -0.00131415 Jy ! Component: 3900 - total flux cleaned = -0.00130432 Jy ! Component: 3950 - total flux cleaned = -0.00133371 Jy ! Component: 4000 - total flux cleaned = -0.00135322 Jy ! Component: 4050 - total flux cleaned = -0.00139208 Jy ! Total flux subtracted in 4096 components = -0.00138239 Jy ! Clean residual min=-0.000605 max=0.000525 Jy/beam ! Clean residual mean=-0.000002 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.18409 Jy keep ! Adding 218 model components to the UV plane model. ! The established model now contains 316 components and 0.18409 Jy ![Exited script file: muppet] wmap "J0059+5812_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 4.882 at -62.36 degrees (North through East) ! Clean map min=-0.0015863 max=0.15947 Jy/beam ! Writing clean map to FITS file: J0059+5812_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.159469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151386 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.284795 0.284795 0.569589 1.13918 2.27836 4.55671 9.11343 18.2269 36.4537 72.9074 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.159 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 4.882 at -62.36 degrees (North through East) ! Clean map min=-0.0015863 max=0.15947 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0059+5812_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:13:13 2017