! Started logfile: J0050-0929_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:50:25 2016 obs J0050-0929_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0050-0929_S_2014_08_09_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.748889 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 4044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0050-0929_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.686035Jy sigma=0.007077 ! Fit after self-cal, rms=0.681448Jy sigma=0.007032 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=9.664 mas, bpa=17.36 degrees ! Estimated noise=1381.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.245429 Jy ! Component: 100 - total flux cleaned = 0.299013 Jy ! Total flux subtracted in 100 components = 0.299013 Jy ! Clean residual min=-0.009232 max=0.015835 Jy/beam ! Clean residual mean=-0.000055 rms=0.002840 Jy/beam ! Combined flux in latest and established models = 0.299013 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.299013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098351Jy sigma=0.000911 ! Fit after self-cal, rms=0.098349Jy sigma=0.000911 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.365 mas, bmaj=11.03 mas, bpa=17.26 degrees ! Estimated noise=1104.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023127 Jy ! Component: 100 - total flux cleaned = 0.035306 Jy ! Component: 150 - total flux cleaned = 0.0426655 Jy ! Component: 200 - total flux cleaned = 0.0474336 Jy ! Total flux subtracted in 200 components = 0.0474336 Jy ! Clean residual min=-0.007632 max=0.007945 Jy/beam ! Clean residual mean=-0.000009 rms=0.001934 Jy/beam ! Combined flux in latest and established models = 0.346447 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 95 components and 0.346447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091677Jy sigma=0.000861 ! Fit after self-cal, rms=0.091663Jy sigma=0.000861 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.88 HN 0.96 KP 1.08 ! LA 1.12 MK 1.00* NL 0.95 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.04 KP 1.02 ! LA 1.07 MK 1.00* NL 0.93 OV 0.99 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.14 HN 1.08 KP 0.92 ! LA 0.83 MK 1.00* NL 0.98 OV 0.96 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 1.03 KP 0.86 ! LA 0.81 MK 1.00* NL 1.08 OV 1.00 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.091663Jy sigma=0.000861 ! Fit after self-cal, rms=0.082604Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.398 mas, bmaj=11.09 mas, bpa=17.08 degrees ! Estimated noise=1106.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709034 Jy ! Component: 100 - total flux cleaned = 0.000657025 Jy ! Component: 150 - total flux cleaned = 0.000554319 Jy ! Component: 200 - total flux cleaned = 0.000466488 Jy ! Total flux subtracted in 200 components = 0.000466488 Jy ! Clean residual min=-0.005975 max=0.005603 Jy/beam ! Clean residual mean=0.000018 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.346913 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 106 components and 0.346913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082523Jy sigma=0.000788 ! Fit after self-cal, rms=0.082504Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082504Jy sigma=0.000787 ! Fit after self-cal, rms=0.079154Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=11.12 mas, bpa=17.31 degrees ! Estimated noise=1105.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125837 Jy ! Component: 100 - total flux cleaned = -0.00155406 Jy ! Component: 150 - total flux cleaned = -0.00159516 Jy ! Component: 200 - total flux cleaned = -0.00163104 Jy ! Total flux subtracted in 200 components = -0.00163104 Jy ! Clean residual min=-0.003975 max=0.004157 Jy/beam ! Clean residual mean=0.000010 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.345282 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 116 components and 0.345282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079090Jy sigma=0.000765 ! Fit after self-cal, rms=0.079072Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365629 Jy ! Component: 100 - total flux cleaned = -0.000336757 Jy ! Component: 150 - total flux cleaned = -0.0002565 Jy ! Component: 200 - total flux cleaned = -0.000255444 Jy ! Total flux subtracted in 200 components = -0.000255444 Jy ! Clean residual min=-0.003943 max=0.004057 Jy/beam ! Clean residual mean=0.000009 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.345026 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 0.345027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079047Jy sigma=0.000765 ! Fit after self-cal, rms=0.079042Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079042Jy sigma=0.000765 ! Fit after self-cal, rms=0.079052Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=11.13 mas, bpa=17.35 degrees ! Estimated noise=1105.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000756568 Jy ! Component: 100 - total flux cleaned = -0.000964917 Jy ! Component: 150 - total flux cleaned = -0.00103423 Jy ! Component: 200 - total flux cleaned = -0.00105428 Jy ! Total flux subtracted in 200 components = -0.00105428 Jy ! Clean residual min=-0.003987 max=0.004015 Jy/beam ! Clean residual mean=0.000008 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.343972 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 127 components and 0.343972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079029Jy sigma=0.000765 ! Fit after self-cal, rms=0.079026Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190766 Jy ! Component: 100 - total flux cleaned = -0.000192653 Jy ! Component: 150 - total flux cleaned = -0.000126206 Jy ! Component: 200 - total flux cleaned = -0.000126197 Jy ! Total flux subtracted in 200 components = -0.000126197 Jy ! Clean residual min=-0.003965 max=0.003979 Jy/beam ! Clean residual mean=0.000008 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.343846 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 134 components and 0.343846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079017Jy sigma=0.000765 ! Fit after self-cal, rms=0.079015Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079015Jy sigma=0.000765 ! Fit after self-cal, rms=0.079007Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.281 mas, bmaj=14.52 mas, bpa=7.123 degrees ! Estimated noise=1245.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.25116e-05 Jy ! Component: 100 - total flux cleaned = 8.51541e-05 Jy ! Component: 150 - total flux cleaned = 0.000104093 Jy ! Component: 200 - total flux cleaned = 0.000136632 Jy ! Total flux subtracted in 200 components = 0.000136632 Jy ! Clean residual min=-0.004074 max=0.004968 Jy/beam ! Clean residual mean=0.000014 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.343983 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 143 components and 0.343983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079008Jy sigma=0.000764 ! Fit after self-cal, rms=0.079000Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.64846e-05 Jy ! Component: 100 - total flux cleaned = 6.93752e-05 Jy ! Component: 150 - total flux cleaned = 8.43195e-05 Jy ! Component: 200 - total flux cleaned = 9.72917e-05 Jy ! Total flux subtracted in 200 components = 9.72917e-05 Jy ! Clean residual min=-0.004044 max=0.004987 Jy/beam ! Clean residual mean=0.000014 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.34408 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 148 components and 0.34408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079001Jy sigma=0.000764 ! Fit after self-cal, rms=0.078998Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.404 mas, bmaj=11.14 mas, bpa=17.37 degrees ! Estimated noise=1104.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.404 x 11.14 at 17.37 degrees (North through East) ! Clean map min=-0.0038093 max=0.31655 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.621 mas, bmaj=9.763 mas, bpa=17.5 degrees ! Estimated noise=1390.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246953 Jy ! Component: 100 - total flux cleaned = 0.300832 Jy ! Component: 150 - total flux cleaned = 0.316882 Jy ! Component: 200 - total flux cleaned = 0.325744 Jy ! Total flux subtracted in 200 components = 0.325744 Jy ! Clean residual min=-0.005459 max=0.004935 Jy/beam ! Clean residual mean=-0.000008 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.325744 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.325744 Jy ! Inverting map and beam ! Estimated beam: bmin=4.404 mas, bmaj=11.14 mas, bpa=17.37 degrees ! Estimated noise=1104.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00763692 Jy ! Component: 100 - total flux cleaned = 0.0116725 Jy ! Component: 150 - total flux cleaned = 0.0140864 Jy ! Component: 200 - total flux cleaned = 0.0155789 Jy ! Total flux subtracted in 200 components = 0.0155789 Jy ! Clean residual min=-0.003921 max=0.004074 Jy/beam ! Clean residual mean=0.000005 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.341323 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 76 components and 0.341322 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.281 mas, bmaj=14.52 mas, bpa=7.123 degrees ! Estimated noise=1245.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017509 Jy ! Component: 100 - total flux cleaned = 0.0023226 Jy ! Component: 150 - total flux cleaned = 0.00243655 Jy ! Component: 200 - total flux cleaned = 0.00255898 Jy ! Total flux subtracted in 200 components = 0.00255898 Jy ! Clean residual min=-0.004125 max=0.005170 Jy/beam ! Clean residual mean=0.000013 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.343881 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.196e-05 Jy ! Component: 100 - total flux cleaned = 0.000159441 Jy ! Component: 150 - total flux cleaned = 0.000206403 Jy ! Component: 200 - total flux cleaned = 0.000235066 Jy ! Total flux subtracted in 200 components = 0.000235066 Jy ! Clean residual min=-0.004075 max=0.005115 Jy/beam ! Clean residual mean=0.000014 rms=0.001250 Jy/beam ! Combined flux in latest and established models = 0.344117 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.344117 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.404 mas, bmaj=11.14 mas, bpa=17.37 degrees ! Estimated noise=1104.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505355 Jy ! Component: 100 - total flux cleaned = -0.000479107 Jy ! Component: 150 - total flux cleaned = -0.000429757 Jy ! Component: 200 - total flux cleaned = -0.000430558 Jy ! Total flux subtracted in 200 components = -0.000430558 Jy ! Clean residual min=-0.003872 max=0.003888 Jy/beam ! Clean residual mean=0.000008 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.343686 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 94 components and 0.343686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079007Jy sigma=0.000765 ! Fit after self-cal, rms=0.079002Jy sigma=0.000764 wmodel J0050-0929_S_2014_08_09_pus_map.mod ! Writing 94 model components to file: J0050-0929_S_2014_08_09_pus_map.mod wobs J0050-0929_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0050-0929_S_2014_08_09_pus_uvs.fits wwins J0050-0929_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J0050-0929_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216883 Jy ! Component: 100 - total flux cleaned = 8.50543e-05 Jy ! Component: 150 - total flux cleaned = 0.00038093 Jy ! Component: 200 - total flux cleaned = 0.000546485 Jy ! Component: 250 - total flux cleaned = 0.000652753 Jy ! Component: 300 - total flux cleaned = 0.000601451 Jy ! Component: 350 - total flux cleaned = 0.00045545 Jy ! Component: 400 - total flux cleaned = 0.000362258 Jy ! Component: 450 - total flux cleaned = 0.000272595 Jy ! Component: 500 - total flux cleaned = 0.000143373 Jy ! Component: 550 - total flux cleaned = 0.000143709 Jy ! Component: 600 - total flux cleaned = 0.000223072 Jy ! Component: 650 - total flux cleaned = 0.000300498 Jy ! Component: 700 - total flux cleaned = 0.000338945 Jy ! Component: 750 - total flux cleaned = 0.000488769 Jy ! Component: 800 - total flux cleaned = 0.000562364 Jy ! Component: 850 - total flux cleaned = 0.000776649 Jy ! Component: 900 - total flux cleaned = 0.000950863 Jy ! Component: 950 - total flux cleaned = 0.000985171 Jy ! Component: 1000 - total flux cleaned = 0.00108562 Jy ! Component: 1050 - total flux cleaned = 0.00115167 Jy ! Component: 1100 - total flux cleaned = 0.00118382 Jy ! Component: 1150 - total flux cleaned = 0.00137514 Jy ! Component: 1200 - total flux cleaned = 0.00146925 Jy ! Component: 1250 - total flux cleaned = 0.001655 Jy ! Component: 1300 - total flux cleaned = 0.00177702 Jy ! Component: 1350 - total flux cleaned = 0.0018974 Jy ! Component: 1400 - total flux cleaned = 0.00204571 Jy ! Component: 1450 - total flux cleaned = 0.00222017 Jy ! Component: 1500 - total flux cleaned = 0.00239225 Jy ! Component: 1550 - total flux cleaned = 0.00253373 Jy ! Component: 1600 - total flux cleaned = 0.00275731 Jy ! Component: 1650 - total flux cleaned = 0.0029226 Jy ! Component: 1700 - total flux cleaned = 0.00308618 Jy ! Component: 1750 - total flux cleaned = 0.00330079 Jy ! Component: 1800 - total flux cleaned = 0.00346022 Jy ! Component: 1850 - total flux cleaned = 0.0036705 Jy ! Component: 1900 - total flux cleaned = 0.0039036 Jy ! Component: 1950 - total flux cleaned = 0.00392941 Jy ! Component: 2000 - total flux cleaned = 0.00415765 Jy ! Component: 2050 - total flux cleaned = 0.00435871 Jy ! Component: 2100 - total flux cleaned = 0.00440887 Jy ! Component: 2150 - total flux cleaned = 0.00458134 Jy ! Component: 2200 - total flux cleaned = 0.00482473 Jy ! Component: 2250 - total flux cleaned = 0.00492072 Jy ! Component: 2300 - total flux cleaned = 0.00503945 Jy ! Component: 2350 - total flux cleaned = 0.00515735 Jy ! Component: 2400 - total flux cleaned = 0.00525072 Jy ! Component: 2450 - total flux cleaned = 0.0054358 Jy ! Component: 2500 - total flux cleaned = 0.00561883 Jy ! Component: 2550 - total flux cleaned = 0.00577768 Jy ! Component: 2600 - total flux cleaned = 0.00593512 Jy ! Component: 2650 - total flux cleaned = 0.00609116 Jy ! Component: 2700 - total flux cleaned = 0.0061352 Jy ! Component: 2750 - total flux cleaned = 0.00628834 Jy ! Component: 2800 - total flux cleaned = 0.00644013 Jy ! Component: 2850 - total flux cleaned = 0.00661192 Jy ! Component: 2900 - total flux cleaned = 0.00665441 Jy ! Component: 2950 - total flux cleaned = 0.0067601 Jy ! Component: 3000 - total flux cleaned = 0.00692775 Jy ! Component: 3050 - total flux cleaned = 0.00705253 Jy ! Component: 3100 - total flux cleaned = 0.0071145 Jy ! Component: 3150 - total flux cleaned = 0.00715554 Jy ! Component: 3200 - total flux cleaned = 0.00731797 Jy ! Component: 3250 - total flux cleaned = 0.00735843 Jy ! Component: 3300 - total flux cleaned = 0.00743838 Jy ! Component: 3350 - total flux cleaned = 0.00753719 Jy ! Component: 3400 - total flux cleaned = 0.0076747 Jy ! Component: 3450 - total flux cleaned = 0.00769419 Jy ! Component: 3500 - total flux cleaned = 0.00773293 Jy ! Component: 3550 - total flux cleaned = 0.00784841 Jy ! Component: 3600 - total flux cleaned = 0.00786749 Jy ! Component: 3650 - total flux cleaned = 0.00801895 Jy ! Component: 3700 - total flux cleaned = 0.00803762 Jy ! Component: 3750 - total flux cleaned = 0.00818709 Jy ! Component: 3800 - total flux cleaned = 0.00826111 Jy ! Component: 3850 - total flux cleaned = 0.00838978 Jy ! Component: 3900 - total flux cleaned = 0.00837155 Jy ! Component: 3950 - total flux cleaned = 0.00848043 Jy ! Component: 4000 - total flux cleaned = 0.00858854 Jy ! Component: 4050 - total flux cleaned = 0.00862447 Jy ! Total flux subtracted in 4096 components = 0.00866003 Jy ! Clean residual min=-0.001005 max=0.000904 Jy/beam ! Clean residual mean=0.000004 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.352346 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 386 components and 0.352346 Jy ![Exited script file: muppet] wmap "J0050-0929_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.404 x 11.14 at 17.37 degrees (North through East) ! Clean map min=-0.0024013 max=0.31732 Jy/beam ! Writing clean map to FITS file: J0050-0929_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.317324 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00034517 device "J0050-0929_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326325 0.326325 0.652651 1.3053 2.6106 5.22121 10.4424 20.8848 41.7697 83.5393 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.317 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.404 x 11.14 at 17.37 degrees (North through East) ! Clean map min=-0.0024013 max=0.31732 Jy/beam quit ! Quitting program ! Log file J0050-0929_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:50:30 2016