! Started logfile: J0047+5657_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:55 2017 obs J0047+5657_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0047+5657_S_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.501412 visibilities/baseline/integration-bin. ! Found source: J0047+5657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0047+5657_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893009Jy sigma=0.013050 ! Fit after self-cal, rms=0.884023Jy sigma=0.012936 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=4.066 mas, bpa=-68.86 degrees ! Estimated noise=1251.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0879323 Jy ! Component: 100 - total flux cleaned = 0.112707 Jy ! Total flux subtracted in 100 components = 0.112707 Jy ! Clean residual min=-0.007180 max=0.011224 Jy/beam ! Clean residual mean=0.000024 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.112707 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.112707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078994Jy sigma=0.000965 ! Fit after self-cal, rms=0.079020Jy sigma=0.000964 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=4.945 mas, bpa=-63.51 degrees ! Estimated noise=791.334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157524 Jy ! Component: 100 - total flux cleaned = 0.0227307 Jy ! Component: 150 - total flux cleaned = 0.0262221 Jy ! Component: 200 - total flux cleaned = 0.0282873 Jy ! Total flux subtracted in 200 components = 0.0282873 Jy ! Clean residual min=-0.004145 max=0.004655 Jy/beam ! Clean residual mean=0.000027 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.140994 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.140994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075869Jy sigma=0.000924 ! Fit after self-cal, rms=0.075905Jy sigma=0.000923 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 1.01 ! MK 1.07 NL 0.97 OV 0.96 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 1.00 ! MK 0.99 NL 1.06 OV 0.98 PT 0.93 ! SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.86 ! MK 1.07 NL 0.98 OV 0.93 PT 0.96 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.86 ! MK 1.01 NL 1.07 OV 1.02 PT 1.03 ! SC 0.86 ! ! ! Fit before self-cal, rms=0.075905Jy sigma=0.000923 ! Fit after self-cal, rms=0.072128Jy sigma=0.000904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=4.899 mas, bpa=-64.26 degrees ! Estimated noise=786.794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300338 Jy ! Component: 100 - total flux cleaned = 0.000494718 Jy ! Component: 150 - total flux cleaned = 0.000496875 Jy ! Component: 200 - total flux cleaned = 0.000447426 Jy ! Total flux subtracted in 200 components = 0.000447426 Jy ! Clean residual min=-0.002403 max=0.002998 Jy/beam ! Clean residual mean=0.000000 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.141441 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.141442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072061Jy sigma=0.000903 ! Fit after self-cal, rms=0.071754Jy sigma=0.000903 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071754Jy sigma=0.000903 ! Fit after self-cal, rms=0.071505Jy sigma=0.000901 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.639 mas, bmaj=4.893 mas, bpa=-64.19 degrees ! Estimated noise=785.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.1101e-05 Jy ! Component: 100 - total flux cleaned = -8.93376e-05 Jy ! Component: 150 - total flux cleaned = -0.000167575 Jy ! Component: 200 - total flux cleaned = -0.000237235 Jy ! Total flux subtracted in 200 components = -0.000237235 Jy ! Clean residual min=-0.002361 max=0.002641 Jy/beam ! Clean residual mean=-0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.141204 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.141204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071472Jy sigma=0.000901 ! Fit after self-cal, rms=0.071515Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165429 Jy ! Component: 100 - total flux cleaned = 0.00156849 Jy ! Component: 150 - total flux cleaned = 0.00146582 Jy ! Component: 200 - total flux cleaned = 0.00146434 Jy ! Total flux subtracted in 200 components = 0.00146434 Jy ! Clean residual min=-0.002225 max=0.002347 Jy/beam ! Clean residual mean=-0.000005 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.142669 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.142669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071440Jy sigma=0.000899 ! Fit after self-cal, rms=0.071460Jy sigma=0.000899 ! Inverting map ! Added new window around map position (67, 120). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947051 Jy ! Component: 100 - total flux cleaned = 0.000876682 Jy ! Component: 150 - total flux cleaned = 0.000872187 Jy ! Component: 200 - total flux cleaned = 0.000907754 Jy ! Total flux subtracted in 200 components = 0.000907754 Jy ! Clean residual min=-0.002146 max=0.001887 Jy/beam ! Clean residual mean=-0.000005 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.143576 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.143576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071377Jy sigma=0.000898 ! Fit after self-cal, rms=0.071372Jy sigma=0.000898 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071372Jy sigma=0.000898 ! Fit after self-cal, rms=0.071199Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=4.884 mas, bpa=-64.24 degrees ! Estimated noise=782.631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391312 Jy ! Component: 100 - total flux cleaned = 0.000357739 Jy ! Component: 150 - total flux cleaned = 0.000297809 Jy ! Component: 200 - total flux cleaned = 0.000298543 Jy ! Total flux subtracted in 200 components = 0.000298543 Jy ! Clean residual min=-0.001961 max=0.001822 Jy/beam ! Clean residual mean=-0.000005 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.143875 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.143875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071167Jy sigma=0.000898 ! Fit after self-cal, rms=0.071195Jy sigma=0.000898 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.22876e-06 Jy ! Component: 100 - total flux cleaned = -4.71707e-05 Jy ! Component: 150 - total flux cleaned = -9.77984e-05 Jy ! Component: 200 - total flux cleaned = -0.000169033 Jy ! Total flux subtracted in 200 components = -0.000169033 Jy ! Clean residual min=-0.001878 max=0.001753 Jy/beam ! Clean residual mean=-0.000006 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.143706 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 0.143706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071175Jy sigma=0.000897 ! Fit after self-cal, rms=0.071185Jy sigma=0.000897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071185Jy sigma=0.000897 ! Fit after self-cal, rms=0.071259Jy sigma=0.000897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.718 mas, bmaj=8.644 mas, bpa=-73.48 degrees ! Estimated noise=910.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.39447e-05 Jy ! Component: 100 - total flux cleaned = -0.000363439 Jy ! Component: 150 - total flux cleaned = -0.000580981 Jy ! Component: 200 - total flux cleaned = -0.000746442 Jy ! Total flux subtracted in 200 components = -0.000746442 Jy ! Clean residual min=-0.001580 max=0.001777 Jy/beam ! Clean residual mean=-0.000009 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.14296 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.142959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071252Jy sigma=0.000897 ! Fit after self-cal, rms=0.071255Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175932 Jy ! Component: 100 - total flux cleaned = -0.000302331 Jy ! Component: 150 - total flux cleaned = -0.00043511 Jy ! Component: 200 - total flux cleaned = -0.00053262 Jy ! Total flux subtracted in 200 components = -0.00053262 Jy ! Clean residual min=-0.001548 max=0.001698 Jy/beam ! Clean residual mean=-0.000009 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.142427 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.142427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071252Jy sigma=0.000897 ! Fit after self-cal, rms=0.071252Jy sigma=0.000897 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=4.885 mas, bpa=-64.12 degrees ! Estimated noise=783.044 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 4.885 at -64.12 degrees (North through East) ! Clean map min=-0.0016419 max=0.11855 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=3.999 mas, bpa=-70.66 degrees ! Estimated noise=1236.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0866097 Jy ! Component: 100 - total flux cleaned = 0.112162 Jy ! Component: 150 - total flux cleaned = 0.125015 Jy ! Component: 200 - total flux cleaned = 0.132047 Jy ! Total flux subtracted in 200 components = 0.132047 Jy ! Clean residual min=-0.004664 max=0.004702 Jy/beam ! Clean residual mean=0.000006 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.132047 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.132047 Jy ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=4.885 mas, bpa=-64.12 degrees ! Estimated noise=783.044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591139 Jy ! Component: 100 - total flux cleaned = 0.00939532 Jy ! Component: 150 - total flux cleaned = 0.0114322 Jy ! Component: 200 - total flux cleaned = 0.01184 Jy ! Total flux subtracted in 200 components = 0.01184 Jy ! Clean residual min=-0.002363 max=0.002347 Jy/beam ! Clean residual mean=0.000000 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.143887 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 45 components and 0.143887 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.718 mas, bmaj=8.644 mas, bpa=-73.48 degrees ! Estimated noise=910.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114667 Jy ! Component: 100 - total flux cleaned = 0.00120938 Jy ! Component: 150 - total flux cleaned = 0.000868712 Jy ! Component: 200 - total flux cleaned = 0.000535569 Jy ! Total flux subtracted in 200 components = 0.000535569 Jy ! Clean residual min=-0.001894 max=0.002056 Jy/beam ! Clean residual mean=-0.000012 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.144422 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238197 Jy ! Component: 100 - total flux cleaned = -0.000430658 Jy ! Component: 150 - total flux cleaned = -0.000636325 Jy ! Component: 200 - total flux cleaned = -0.000804416 Jy ! Total flux subtracted in 200 components = -0.000804416 Jy ! Clean residual min=-0.001785 max=0.001904 Jy/beam ! Clean residual mean=-0.000012 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.143618 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 96 components and 0.143618 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=4.885 mas, bpa=-64.12 degrees ! Estimated noise=783.044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201339 Jy ! Component: 100 - total flux cleaned = -0.000298788 Jy ! Component: 150 - total flux cleaned = -0.00021916 Jy ! Component: 200 - total flux cleaned = -0.000145532 Jy ! Total flux subtracted in 200 components = -0.000145532 Jy ! Clean residual min=-0.001955 max=0.001742 Jy/beam ! Clean residual mean=-0.000004 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.143472 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 0.143472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071289Jy sigma=0.000898 ! Fit after self-cal, rms=0.071263Jy sigma=0.000898 wmodel J0047+5657_S_2014_01_04_pus_map.mod ! Writing 113 model components to file: J0047+5657_S_2014_01_04_pus_map.mod wobs J0047+5657_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0047+5657_S_2014_01_04_pus_uvs.fits wwins J0047+5657_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0047+5657_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000769845 Jy ! Component: 100 - total flux cleaned = -0.00105422 Jy ! Component: 150 - total flux cleaned = -0.00111439 Jy ! Component: 200 - total flux cleaned = -0.0011708 Jy ! Component: 250 - total flux cleaned = -0.00133299 Jy ! Component: 300 - total flux cleaned = -0.00156768 Jy ! Component: 350 - total flux cleaned = -0.00174495 Jy ! Component: 400 - total flux cleaned = -0.00201619 Jy ! Component: 450 - total flux cleaned = -0.00225641 Jy ! Component: 500 - total flux cleaned = -0.00246761 Jy ! Component: 550 - total flux cleaned = -0.00269623 Jy ! Component: 600 - total flux cleaned = -0.00285223 Jy ! Component: 650 - total flux cleaned = -0.00300564 Jy ! Component: 700 - total flux cleaned = -0.00324085 Jy ! Component: 750 - total flux cleaned = -0.00334583 Jy ! Component: 800 - total flux cleaned = -0.00351022 Jy ! Component: 850 - total flux cleaned = -0.00369079 Jy ! Component: 900 - total flux cleaned = -0.00376925 Jy ! Component: 950 - total flux cleaned = -0.00392418 Jy ! Component: 1000 - total flux cleaned = -0.00403845 Jy ! Component: 1050 - total flux cleaned = -0.00420644 Jy ! Component: 1100 - total flux cleaned = -0.00440816 Jy ! Component: 1150 - total flux cleaned = -0.00449821 Jy ! Component: 1200 - total flux cleaned = -0.00455147 Jy ! Component: 1250 - total flux cleaned = -0.00462146 Jy ! Component: 1300 - total flux cleaned = -0.00462166 Jy ! Component: 1350 - total flux cleaned = -0.00467323 Jy ! Component: 1400 - total flux cleaned = -0.00472411 Jy ! Component: 1450 - total flux cleaned = -0.00474083 Jy ! Component: 1500 - total flux cleaned = -0.00479053 Jy ! Component: 1550 - total flux cleaned = -0.00483963 Jy ! Component: 1600 - total flux cleaned = -0.00488794 Jy ! Component: 1650 - total flux cleaned = -0.00491965 Jy ! Component: 1700 - total flux cleaned = -0.00496694 Jy ! Component: 1750 - total flux cleaned = -0.00501389 Jy ! Component: 1800 - total flux cleaned = -0.00507562 Jy ! Component: 1850 - total flux cleaned = -0.00509091 Jy ! Component: 1900 - total flux cleaned = -0.00521184 Jy ! Component: 1950 - total flux cleaned = -0.00525664 Jy ! Component: 2000 - total flux cleaned = -0.00536036 Jy ! Component: 2050 - total flux cleaned = -0.00540425 Jy ! Component: 2100 - total flux cleaned = -0.00549134 Jy ! Component: 2150 - total flux cleaned = -0.00557741 Jy ! Component: 2200 - total flux cleaned = -0.00560586 Jy ! Component: 2250 - total flux cleaned = -0.00567641 Jy ! Component: 2300 - total flux cleaned = -0.00573219 Jy ! Component: 2350 - total flux cleaned = -0.00578739 Jy ! Component: 2400 - total flux cleaned = -0.00585588 Jy ! Component: 2450 - total flux cleaned = -0.00589664 Jy ! Component: 2500 - total flux cleaned = -0.00595051 Jy ! Component: 2550 - total flux cleaned = -0.00597722 Jy ! Component: 2600 - total flux cleaned = -0.00603023 Jy ! Component: 2650 - total flux cleaned = -0.00605664 Jy ! Component: 2700 - total flux cleaned = -0.00614778 Jy ! Component: 2750 - total flux cleaned = -0.00621217 Jy ! Component: 2800 - total flux cleaned = -0.00623768 Jy ! Component: 2850 - total flux cleaned = -0.00631381 Jy ! Component: 2900 - total flux cleaned = -0.0063642 Jy ! Component: 2950 - total flux cleaned = -0.00643928 Jy ! Component: 3000 - total flux cleaned = -0.00647651 Jy ! Component: 3050 - total flux cleaned = -0.00651358 Jy ! Component: 3100 - total flux cleaned = -0.00658707 Jy ! Component: 3150 - total flux cleaned = -0.00663586 Jy ! Component: 3200 - total flux cleaned = -0.00670848 Jy ! Component: 3250 - total flux cleaned = -0.00676871 Jy ! Component: 3300 - total flux cleaned = -0.0068286 Jy ! Component: 3350 - total flux cleaned = -0.00687621 Jy ! Component: 3400 - total flux cleaned = -0.00697086 Jy ! Component: 3450 - total flux cleaned = -0.0070062 Jy ! Component: 3500 - total flux cleaned = -0.00711163 Jy ! Component: 3550 - total flux cleaned = -0.00718152 Jy ! Component: 3600 - total flux cleaned = -0.00725106 Jy ! Component: 3650 - total flux cleaned = -0.00732024 Jy ! Component: 3700 - total flux cleaned = -0.00742361 Jy ! Component: 3750 - total flux cleaned = -0.00746932 Jy ! Component: 3800 - total flux cleaned = -0.00758298 Jy ! Component: 3850 - total flux cleaned = -0.00767347 Jy ! Component: 3900 - total flux cleaned = -0.00771849 Jy ! Component: 3950 - total flux cleaned = -0.00777457 Jy ! Component: 4000 - total flux cleaned = -0.00784158 Jy ! Component: 4050 - total flux cleaned = -0.00788601 Jy ! Total flux subtracted in 4096 components = -0.00791926 Jy ! Clean residual min=-0.000743 max=0.000558 Jy/beam ! Clean residual mean=-0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.135553 Jy keep ! Adding 207 model components to the UV plane model. ! The established model now contains 320 components and 0.135553 Jy ![Exited script file: muppet] wmap "J0047+5657_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 4.885 at -64.12 degrees (North through East) ! Clean map min=-0.0017293 max=0.11741 Jy/beam ! Writing clean map to FITS file: J0047+5657_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117406 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179024 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.45745 0.45745 0.9149 1.8298 3.6596 7.3192 14.6384 29.2768 58.5536 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 4.885 at -64.12 degrees (North through East) ! Clean map min=-0.0017293 max=0.11741 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0047+5657_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:59 2017