! Started logfile: J0046+3900_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:50 2017 obs J0046+3900_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0046+3900_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0046+3900 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0046+3900_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.862919Jy sigma=0.013895 ! Fit after self-cal, rms=0.855830Jy sigma=0.013788 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=4.871 mas, bpa=-2.399 degrees ! Estimated noise=1095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109232 Jy ! Component: 100 - total flux cleaned = 0.133308 Jy ! Total flux subtracted in 100 components = 0.133308 Jy ! Clean residual min=-0.005425 max=0.007496 Jy/beam ! Clean residual mean=0.000019 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.133308 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.133308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070593Jy sigma=0.000961 ! Fit after self-cal, rms=0.070575Jy sigma=0.000961 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=5.698 mas, bpa=-2.411 degrees ! Estimated noise=596.582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111384 Jy ! Component: 100 - total flux cleaned = 0.0166043 Jy ! Component: 150 - total flux cleaned = 0.0199588 Jy ! Component: 200 - total flux cleaned = 0.022108 Jy ! Total flux subtracted in 200 components = 0.022108 Jy ! Clean residual min=-0.004138 max=0.004948 Jy/beam ! Clean residual mean=0.000006 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.155416 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.155416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068330Jy sigma=0.000941 ! Fit after self-cal, rms=0.068286Jy sigma=0.000941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.02 ! MK 1.02 NL 0.97 OV 0.96 PT 1.02 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 1.01 ! MK 1.02 NL 1.05 OV 0.99 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.83 ! MK 1.05 NL 0.96 OV 0.95 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.89 ! MK 1.07 NL 1.08 OV 0.99 PT 0.99 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.068286Jy sigma=0.000941 ! Fit after self-cal, rms=0.065075Jy sigma=0.000908 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=5.763 mas, bpa=-1.368 degrees ! Estimated noise=598.327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.67441e-05 Jy ! Component: 100 - total flux cleaned = -9.66842e-05 Jy ! Component: 150 - total flux cleaned = -0.0002093 Jy ! Component: 200 - total flux cleaned = -0.000338114 Jy ! Total flux subtracted in 200 components = -0.000338114 Jy ! Clean residual min=-0.002104 max=0.002593 Jy/beam ! Clean residual mean=-0.000004 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.155078 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.155078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065043Jy sigma=0.000907 ! Fit after self-cal, rms=0.064809Jy sigma=0.000907 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064809Jy sigma=0.000907 ! Fit after self-cal, rms=0.064402Jy sigma=0.000905 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=5.759 mas, bpa=-1.542 degrees ! Estimated noise=597.663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.33508e-05 Jy ! Component: 100 - total flux cleaned = -1.94412e-05 Jy ! Component: 150 - total flux cleaned = -7.13565e-05 Jy ! Component: 200 - total flux cleaned = -0.000133668 Jy ! Total flux subtracted in 200 components = -0.000133668 Jy ! Clean residual min=-0.002235 max=0.001868 Jy/beam ! Clean residual mean=-0.000002 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.154944 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.154944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064387Jy sigma=0.000905 ! Fit after self-cal, rms=0.064369Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.14333e-05 Jy ! Component: 100 - total flux cleaned = -0.00012626 Jy ! Component: 150 - total flux cleaned = -0.000150008 Jy ! Component: 200 - total flux cleaned = -0.000182829 Jy ! Total flux subtracted in 200 components = -0.000182829 Jy ! Clean residual min=-0.002224 max=0.001888 Jy/beam ! Clean residual mean=-0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.154761 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.154761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064364Jy sigma=0.000905 ! Fit after self-cal, rms=0.064366Jy sigma=0.000905 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064366Jy sigma=0.000905 ! Fit after self-cal, rms=0.064172Jy sigma=0.000905 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=5.757 mas, bpa=-1.507 degrees ! Estimated noise=597.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115966 Jy ! Component: 100 - total flux cleaned = 7.57303e-05 Jy ! Component: 150 - total flux cleaned = 5.18006e-05 Jy ! Component: 200 - total flux cleaned = 2.92904e-05 Jy ! Total flux subtracted in 200 components = 2.92904e-05 Jy ! Clean residual min=-0.002193 max=0.001820 Jy/beam ! Clean residual mean=-0.000002 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.15479 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.15479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064167Jy sigma=0.000905 ! Fit after self-cal, rms=0.064157Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.43263e-05 Jy ! Component: 100 - total flux cleaned = -7.45534e-05 Jy ! Component: 150 - total flux cleaned = -8.42576e-05 Jy ! Component: 200 - total flux cleaned = -0.000101282 Jy ! Total flux subtracted in 200 components = -0.000101282 Jy ! Clean residual min=-0.002186 max=0.001841 Jy/beam ! Clean residual mean=-0.000001 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.154689 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.154689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064154Jy sigma=0.000905 ! Fit after self-cal, rms=0.064156Jy sigma=0.000905 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064156Jy sigma=0.000905 ! Fit after self-cal, rms=0.064024Jy sigma=0.000905 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.78 mas, bmaj=9.658 mas, bpa=12.84 degrees ! Estimated noise=675.267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357734 Jy ! Component: 100 - total flux cleaned = 0.000356059 Jy ! Component: 150 - total flux cleaned = 0.000393462 Jy ! Component: 200 - total flux cleaned = 0.000418884 Jy ! Total flux subtracted in 200 components = 0.000418884 Jy ! Clean residual min=-0.001956 max=0.001820 Jy/beam ! Clean residual mean=-0.000003 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.155108 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.155108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064028Jy sigma=0.000905 ! Fit after self-cal, rms=0.064014Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.65472e-05 Jy ! Component: 100 - total flux cleaned = 4.14002e-05 Jy ! Component: 150 - total flux cleaned = 4.1489e-05 Jy ! Component: 200 - total flux cleaned = 4.15884e-05 Jy ! Total flux subtracted in 200 components = 4.15884e-05 Jy ! Clean residual min=-0.001944 max=0.001775 Jy/beam ! Clean residual mean=-0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.15515 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.15515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064017Jy sigma=0.000905 ! Fit after self-cal, rms=0.064015Jy sigma=0.000905 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=5.755 mas, bpa=-1.419 degrees ! Estimated noise=597.133 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 5.755 at -1.419 degrees (North through East) ! Clean map min=-0.0019314 max=0.14277 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=4.894 mas, bpa=-1.292 degrees ! Estimated noise=1105.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110347 Jy ! Component: 100 - total flux cleaned = 0.134649 Jy ! Component: 150 - total flux cleaned = 0.142502 Jy ! Component: 200 - total flux cleaned = 0.14641 Jy ! Total flux subtracted in 200 components = 0.14641 Jy ! Clean residual min=-0.003584 max=0.003417 Jy/beam ! Clean residual mean=0.000003 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.14641 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.14641 Jy ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=5.755 mas, bpa=-1.419 degrees ! Estimated noise=597.133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378108 Jy ! Component: 100 - total flux cleaned = 0.00547004 Jy ! Component: 150 - total flux cleaned = 0.00643953 Jy ! Component: 200 - total flux cleaned = 0.00700799 Jy ! Total flux subtracted in 200 components = 0.00700799 Jy ! Clean residual min=-0.002127 max=0.001855 Jy/beam ! Clean residual mean=-0.000000 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.153418 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 0.153418 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.78 mas, bmaj=9.658 mas, bpa=12.84 degrees ! Estimated noise=675.267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000898083 Jy ! Component: 100 - total flux cleaned = 0.00118298 Jy ! Component: 150 - total flux cleaned = 0.0012676 Jy ! Component: 200 - total flux cleaned = 0.0013026 Jy ! Total flux subtracted in 200 components = 0.0013026 Jy ! Clean residual min=-0.001974 max=0.001800 Jy/beam ! Clean residual mean=-0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.154721 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10627e-05 Jy ! Component: 100 - total flux cleaned = 6.70653e-05 Jy ! Component: 150 - total flux cleaned = 9.06264e-05 Jy ! Component: 200 - total flux cleaned = 0.000111613 Jy ! Total flux subtracted in 200 components = 0.000111613 Jy ! Clean residual min=-0.001965 max=0.001754 Jy/beam ! Clean residual mean=-0.000002 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.154833 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.154833 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=5.755 mas, bpa=-1.419 degrees ! Estimated noise=597.133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350281 Jy ! Component: 100 - total flux cleaned = -0.000434004 Jy ! Component: 150 - total flux cleaned = -0.000466206 Jy ! Component: 200 - total flux cleaned = -0.000478913 Jy ! Total flux subtracted in 200 components = -0.000478913 Jy ! Clean residual min=-0.002053 max=0.001831 Jy/beam ! Clean residual mean=-0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.154354 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.154354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064007Jy sigma=0.000905 ! Fit after self-cal, rms=0.064031Jy sigma=0.000905 wmodel J0046+3900_S_2014_01_04_pus_map.mod ! Writing 49 model components to file: J0046+3900_S_2014_01_04_pus_map.mod wobs J0046+3900_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0046+3900_S_2014_01_04_pus_uvs.fits wwins J0046+3900_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0046+3900_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336822 Jy ! Component: 100 - total flux cleaned = -0.000401645 Jy ! Component: 150 - total flux cleaned = -0.000581307 Jy ! Component: 200 - total flux cleaned = -0.000639707 Jy ! Component: 250 - total flux cleaned = -0.000640499 Jy ! Component: 300 - total flux cleaned = -0.000589519 Jy ! Component: 350 - total flux cleaned = -0.000564269 Jy ! Component: 400 - total flux cleaned = -0.000539908 Jy ! Component: 450 - total flux cleaned = -0.000563258 Jy ! Component: 500 - total flux cleaned = -0.000675041 Jy ! Component: 550 - total flux cleaned = -0.000696488 Jy ! Component: 600 - total flux cleaned = -0.00084579 Jy ! Component: 650 - total flux cleaned = -0.000929056 Jy ! Component: 700 - total flux cleaned = -0.00101025 Jy ! Component: 750 - total flux cleaned = -0.0011493 Jy ! Component: 800 - total flux cleaned = -0.00124645 Jy ! Component: 850 - total flux cleaned = -0.00138013 Jy ! Component: 900 - total flux cleaned = -0.00147399 Jy ! Component: 950 - total flux cleaned = -0.00154754 Jy ! Component: 1000 - total flux cleaned = -0.00165556 Jy ! Component: 1050 - total flux cleaned = -0.00179659 Jy ! Component: 1100 - total flux cleaned = -0.00193509 Jy ! Component: 1150 - total flux cleaned = -0.00201955 Jy ! Component: 1200 - total flux cleaned = -0.00205277 Jy ! Component: 1250 - total flux cleaned = -0.00211829 Jy ! Component: 1300 - total flux cleaned = -0.00218249 Jy ! Component: 1350 - total flux cleaned = -0.00216659 Jy ! Component: 1400 - total flux cleaned = -0.00218235 Jy ! Component: 1450 - total flux cleaned = -0.00221292 Jy ! Component: 1500 - total flux cleaned = -0.00216741 Jy ! Component: 1550 - total flux cleaned = -0.00219752 Jy ! Component: 1600 - total flux cleaned = -0.00213878 Jy ! Component: 1650 - total flux cleaned = -0.00215356 Jy ! Component: 1700 - total flux cleaned = -0.00218206 Jy ! Component: 1750 - total flux cleaned = -0.0021401 Jy ! Component: 1800 - total flux cleaned = -0.00216793 Jy ! Component: 1850 - total flux cleaned = -0.0021405 Jy ! Component: 1900 - total flux cleaned = -0.00215381 Jy ! Component: 1950 - total flux cleaned = -0.00215369 Jy ! Component: 2000 - total flux cleaned = -0.00212748 Jy ! Component: 2050 - total flux cleaned = -0.00212769 Jy ! Component: 2100 - total flux cleaned = -0.00212783 Jy ! Component: 2150 - total flux cleaned = -0.00211512 Jy ! Component: 2200 - total flux cleaned = -0.00212771 Jy ! Component: 2250 - total flux cleaned = -0.00211516 Jy ! Component: 2300 - total flux cleaned = -0.00210274 Jy ! Component: 2350 - total flux cleaned = -0.00207819 Jy ! Component: 2400 - total flux cleaned = -0.00204186 Jy ! Component: 2450 - total flux cleaned = -0.00204175 Jy ! Component: 2500 - total flux cleaned = -0.00199422 Jy ! Component: 2550 - total flux cleaned = -0.00197062 Jy ! Component: 2600 - total flux cleaned = -0.00194732 Jy ! Component: 2650 - total flux cleaned = -0.00192418 Jy ! Component: 2700 - total flux cleaned = -0.00193553 Jy ! Component: 2750 - total flux cleaned = -0.00190125 Jy ! Component: 2800 - total flux cleaned = -0.0019125 Jy ! Component: 2850 - total flux cleaned = -0.00190129 Jy ! Component: 2900 - total flux cleaned = -0.00191244 Jy ! Component: 2950 - total flux cleaned = -0.00190148 Jy ! Component: 3000 - total flux cleaned = -0.00193438 Jy ! Component: 3050 - total flux cleaned = -0.00193429 Jy ! Component: 3100 - total flux cleaned = -0.00192356 Jy ! Component: 3150 - total flux cleaned = -0.00193435 Jy ! Component: 3200 - total flux cleaned = -0.00193441 Jy ! Component: 3250 - total flux cleaned = -0.00192392 Jy ! Component: 3300 - total flux cleaned = -0.00192395 Jy ! Component: 3350 - total flux cleaned = -0.001903 Jy ! Component: 3400 - total flux cleaned = -0.00188222 Jy ! Component: 3450 - total flux cleaned = -0.00188229 Jy ! Component: 3500 - total flux cleaned = -0.00187208 Jy ! Component: 3550 - total flux cleaned = -0.00189247 Jy ! Component: 3600 - total flux cleaned = -0.00186199 Jy ! Component: 3650 - total flux cleaned = -0.0018418 Jy ! Component: 3700 - total flux cleaned = -0.00180171 Jy ! Component: 3750 - total flux cleaned = -0.00178181 Jy ! Component: 3800 - total flux cleaned = -0.00175204 Jy ! Component: 3850 - total flux cleaned = -0.00173225 Jy ! Component: 3900 - total flux cleaned = -0.00170272 Jy ! Component: 3950 - total flux cleaned = -0.00165369 Jy ! Component: 4000 - total flux cleaned = -0.00167319 Jy ! Component: 4050 - total flux cleaned = -0.00161486 Jy ! Total flux subtracted in 4096 components = -0.00161489 Jy ! Clean residual min=-0.000721 max=0.000589 Jy/beam ! Clean residual mean=0.000000 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.152739 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 276 components and 0.152739 Jy ![Exited script file: muppet] wmap "J0046+3900_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 5.755 at -1.419 degrees (North through East) ! Clean map min=-0.0014767 max=0.14293 Jy/beam ! Writing clean map to FITS file: J0046+3900_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148057 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.310768 0.310768 0.621537 1.24307 2.48615 4.97229 9.94459 19.8892 39.7783 79.5567 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 5.755 at -1.419 degrees (North through East) ! Clean map min=-0.0014767 max=0.14293 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0046+3900_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:54 2017