! Started logfile: J0044+6803_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:46 2017 obs J0044+6803_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0044+6803_S_2014_01_04_pus_uva.fits ! AN table 1: 85 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.49902 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0044+6803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0044+6803_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914511Jy sigma=0.012065 ! Fit after self-cal, rms=0.889429Jy sigma=0.011867 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.464 mas, bmaj=9.83 mas, bpa=83.96 degrees ! Estimated noise=1184.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0864392 Jy ! Component: 100 - total flux cleaned = 0.106248 Jy ! Total flux subtracted in 100 components = 0.106248 Jy ! Clean residual min=-0.005124 max=0.007250 Jy/beam ! Clean residual mean=0.000000 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.106248 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.106248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083920Jy sigma=0.000913 ! Fit after self-cal, rms=0.083915Jy sigma=0.000913 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=11 mas, bpa=84.84 degrees ! Estimated noise=726.657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100786 Jy ! Component: 100 - total flux cleaned = 0.0144041 Jy ! Component: 150 - total flux cleaned = 0.0173446 Jy ! Component: 200 - total flux cleaned = 0.0195646 Jy ! Total flux subtracted in 200 components = 0.0195646 Jy ! Clean residual min=-0.003905 max=0.004404 Jy/beam ! Clean residual mean=-0.000001 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.125812 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.125812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082695Jy sigma=0.000898 ! Fit after self-cal, rms=0.082823Jy sigma=0.000898 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 1.01 ! MK 0.99 NL 0.97 OV 0.99 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.96 ! MK 0.98 NL 0.97 OV 1.03 PT 0.99 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.83 ! MK 0.99 NL 1.00 OV 0.93 PT 0.94 ! SC 1.13 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.88 ! MK 1.03 NL 1.06 OV 0.99 PT 1.02 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.082823Jy sigma=0.000898 ! Fit after self-cal, rms=0.081369Jy sigma=0.000887 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=11.01 mas, bpa=85.04 degrees ! Estimated noise=721.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456626 Jy ! Component: 100 - total flux cleaned = 0.000502631 Jy ! Component: 150 - total flux cleaned = 0.000609628 Jy ! Component: 200 - total flux cleaned = 0.000706585 Jy ! Total flux subtracted in 200 components = 0.000706585 Jy ! Clean residual min=-0.002603 max=0.003332 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.126519 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.126519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081354Jy sigma=0.000887 ! Fit after self-cal, rms=0.081116Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081116Jy sigma=0.000887 ! Fit after self-cal, rms=0.082203Jy sigma=0.000884 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=10.93 mas, bpa=84.88 degrees ! Estimated noise=721.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000968972 Jy ! Component: 100 - total flux cleaned = 0.000966009 Jy ! Component: 150 - total flux cleaned = 0.000868141 Jy ! Component: 200 - total flux cleaned = 0.000785424 Jy ! Total flux subtracted in 200 components = 0.000785424 Jy ! Clean residual min=-0.002412 max=0.002538 Jy/beam ! Clean residual mean=-0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.127304 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.127304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082180Jy sigma=0.000884 ! Fit after self-cal, rms=0.082199Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.25123e-05 Jy ! Component: 100 - total flux cleaned = -0.000115688 Jy ! Component: 150 - total flux cleaned = -0.000164006 Jy ! Component: 200 - total flux cleaned = -0.000207931 Jy ! Total flux subtracted in 200 components = -0.000207931 Jy ! Clean residual min=-0.002402 max=0.002495 Jy/beam ! Clean residual mean=-0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.127096 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.127096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082191Jy sigma=0.000883 ! Fit after self-cal, rms=0.082196Jy sigma=0.000883 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082196Jy sigma=0.000883 ! Fit after self-cal, rms=0.082455Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=10.9 mas, bpa=84.84 degrees ! Estimated noise=722.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314344 Jy ! Component: 100 - total flux cleaned = 0.000275764 Jy ! Component: 150 - total flux cleaned = 0.000207934 Jy ! Component: 200 - total flux cleaned = 0.000162545 Jy ! Total flux subtracted in 200 components = 0.000162545 Jy ! Clean residual min=-0.002342 max=0.002318 Jy/beam ! Clean residual mean=-0.000001 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.127259 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.127259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082447Jy sigma=0.000883 ! Fit after self-cal, rms=0.082449Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.40522e-05 Jy ! Component: 100 - total flux cleaned = -8.40343e-05 Jy ! Component: 150 - total flux cleaned = -0.000132254 Jy ! Component: 200 - total flux cleaned = -0.000164927 Jy ! Total flux subtracted in 200 components = -0.000164927 Jy ! Clean residual min=-0.002344 max=0.002294 Jy/beam ! Clean residual mean=-0.000001 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.127094 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.127094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082445Jy sigma=0.000883 ! Fit after self-cal, rms=0.082449Jy sigma=0.000883 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082449Jy sigma=0.000883 ! Fit after self-cal, rms=0.082496Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.736 mas, bmaj=13.29 mas, bpa=84.24 degrees ! Estimated noise=828.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015792 Jy ! Component: 100 - total flux cleaned = -0.000177588 Jy ! Component: 150 - total flux cleaned = -0.000177678 Jy ! Component: 200 - total flux cleaned = -0.000177995 Jy ! Total flux subtracted in 200 components = -0.000177995 Jy ! Clean residual min=-0.002268 max=0.002044 Jy/beam ! Clean residual mean=-0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.126916 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.126916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082506Jy sigma=0.000883 ! Fit after self-cal, rms=0.082471Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.47086e-05 Jy ! Component: 100 - total flux cleaned = -2.03275e-05 Jy ! Component: 150 - total flux cleaned = 8.80277e-06 Jy ! Component: 200 - total flux cleaned = 3.33077e-05 Jy ! Total flux subtracted in 200 components = 3.33077e-05 Jy ! Clean residual min=-0.002228 max=0.002029 Jy/beam ! Clean residual mean=-0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.126949 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.126949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082478Jy sigma=0.000883 ! Fit after self-cal, rms=0.082466Jy sigma=0.000883 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=10.88 mas, bpa=84.8 degrees ! Estimated noise=722.403 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 10.88 at 84.8 degrees (North through East) ! Clean map min=-0.0021256 max=0.11457 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=9.666 mas, bpa=83.79 degrees ! Estimated noise=1193.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869311 Jy ! Component: 100 - total flux cleaned = 0.107451 Jy ! Component: 150 - total flux cleaned = 0.115234 Jy ! Component: 200 - total flux cleaned = 0.11938 Jy ! Total flux subtracted in 200 components = 0.11938 Jy ! Clean residual min=-0.003305 max=0.003977 Jy/beam ! Clean residual mean=-0.000000 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.11938 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.11938 Jy ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=10.88 mas, bpa=84.8 degrees ! Estimated noise=722.403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296923 Jy ! Component: 100 - total flux cleaned = 0.0045622 Jy ! Component: 150 - total flux cleaned = 0.00560764 Jy ! Component: 200 - total flux cleaned = 0.00634597 Jy ! Total flux subtracted in 200 components = 0.00634597 Jy ! Clean residual min=-0.002393 max=0.002392 Jy/beam ! Clean residual mean=-0.000001 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.125726 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.125726 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.736 mas, bmaj=13.29 mas, bpa=84.24 degrees ! Estimated noise=828.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554167 Jy ! Component: 100 - total flux cleaned = 0.000698206 Jy ! Component: 150 - total flux cleaned = 0.00081089 Jy ! Component: 200 - total flux cleaned = 0.000891874 Jy ! Total flux subtracted in 200 components = 0.000891874 Jy ! Clean residual min=-0.002276 max=0.002075 Jy/beam ! Clean residual mean=-0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.126617 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.95885e-05 Jy ! Component: 100 - total flux cleaned = 0.000120412 Jy ! Component: 150 - total flux cleaned = 0.000158919 Jy ! Component: 200 - total flux cleaned = 0.000165879 Jy ! Total flux subtracted in 200 components = 0.000165879 Jy ! Clean residual min=-0.002255 max=0.002069 Jy/beam ! Clean residual mean=-0.000001 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.126783 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 60 components and 0.126783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=10.88 mas, bpa=84.8 degrees ! Estimated noise=722.403 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.53744e-05 Jy ! Component: 100 - total flux cleaned = 7.15946e-05 Jy ! Component: 150 - total flux cleaned = 0.000108413 Jy ! Component: 200 - total flux cleaned = 0.000109092 Jy ! Total flux subtracted in 200 components = 0.000109092 Jy ! Clean residual min=-0.002340 max=0.002212 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.126892 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.126892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082462Jy sigma=0.000883 ! Fit after self-cal, rms=0.082484Jy sigma=0.000883 wmodel J0044+6803_S_2014_01_04_pus_map.mod ! Writing 68 model components to file: J0044+6803_S_2014_01_04_pus_map.mod wobs J0044+6803_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0044+6803_S_2014_01_04_pus_uvs.fits wwins J0044+6803_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0044+6803_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.04861e-05 Jy ! Component: 100 - total flux cleaned = 0.00024807 Jy ! Component: 150 - total flux cleaned = 0.000601209 Jy ! Component: 200 - total flux cleaned = 0.000868871 Jy ! Component: 250 - total flux cleaned = 0.00106035 Jy ! Component: 300 - total flux cleaned = 0.00124416 Jy ! Component: 350 - total flux cleaned = 0.00136227 Jy ! Component: 400 - total flux cleaned = 0.00139097 Jy ! Component: 450 - total flux cleaned = 0.001446 Jy ! Component: 500 - total flux cleaned = 0.00155115 Jy ! Component: 550 - total flux cleaned = 0.00157577 Jy ! Component: 600 - total flux cleaned = 0.00160004 Jy ! Component: 650 - total flux cleaned = 0.0017202 Jy ! Component: 700 - total flux cleaned = 0.00176719 Jy ! Component: 750 - total flux cleaned = 0.00185806 Jy ! Component: 800 - total flux cleaned = 0.00187996 Jy ! Component: 850 - total flux cleaned = 0.00192394 Jy ! Component: 900 - total flux cleaned = 0.00198807 Jy ! Component: 950 - total flux cleaned = 0.00202993 Jy ! Component: 1000 - total flux cleaned = 0.00209092 Jy ! Component: 1050 - total flux cleaned = 0.00209105 Jy ! Component: 1100 - total flux cleaned = 0.00203273 Jy ! Component: 1150 - total flux cleaned = 0.00201361 Jy ! Component: 1200 - total flux cleaned = 0.00201361 Jy ! Component: 1250 - total flux cleaned = 0.00199514 Jy ! Component: 1300 - total flux cleaned = 0.00197701 Jy ! Component: 1350 - total flux cleaned = 0.00201315 Jy ! Component: 1400 - total flux cleaned = 0.00201284 Jy ! Component: 1450 - total flux cleaned = 0.00201264 Jy ! Component: 1500 - total flux cleaned = 0.00201287 Jy ! Component: 1550 - total flux cleaned = 0.00204707 Jy ! Component: 1600 - total flux cleaned = 0.0020639 Jy ! Component: 1650 - total flux cleaned = 0.00204735 Jy ! Component: 1700 - total flux cleaned = 0.00209644 Jy ! Component: 1750 - total flux cleaned = 0.00206422 Jy ! Component: 1800 - total flux cleaned = 0.00208026 Jy ! Component: 1850 - total flux cleaned = 0.00212723 Jy ! Component: 1900 - total flux cleaned = 0.00214264 Jy ! Component: 1950 - total flux cleaned = 0.00217351 Jy ! Component: 2000 - total flux cleaned = 0.0021734 Jy ! Component: 2050 - total flux cleaned = 0.00220342 Jy ! Component: 2100 - total flux cleaned = 0.00218866 Jy ! Component: 2150 - total flux cleaned = 0.00221834 Jy ! Component: 2200 - total flux cleaned = 0.00221843 Jy ! Component: 2250 - total flux cleaned = 0.00220401 Jy ! Component: 2300 - total flux cleaned = 0.00218974 Jy ! Component: 2350 - total flux cleaned = 0.00216118 Jy ! Component: 2400 - total flux cleaned = 0.00210459 Jy ! Component: 2450 - total flux cleaned = 0.00207648 Jy ! Component: 2500 - total flux cleaned = 0.00202082 Jy ! Component: 2550 - total flux cleaned = 0.00202088 Jy ! Component: 2600 - total flux cleaned = 0.0019936 Jy ! Component: 2650 - total flux cleaned = 0.002007 Jy ! Component: 2700 - total flux cleaned = 0.00200687 Jy ! Component: 2750 - total flux cleaned = 0.00200684 Jy ! Component: 2800 - total flux cleaned = 0.00196698 Jy ! Component: 2850 - total flux cleaned = 0.00199335 Jy ! Component: 2900 - total flux cleaned = 0.00198017 Jy ! Component: 2950 - total flux cleaned = 0.00195401 Jy ! Component: 3000 - total flux cleaned = 0.00190207 Jy ! Component: 3050 - total flux cleaned = 0.00182475 Jy ! Component: 3100 - total flux cleaned = 0.00185041 Jy ! Component: 3150 - total flux cleaned = 0.00176116 Jy ! Component: 3200 - total flux cleaned = 0.00168512 Jy ! Component: 3250 - total flux cleaned = 0.00162214 Jy ! Component: 3300 - total flux cleaned = 0.00154697 Jy ! Component: 3350 - total flux cleaned = 0.00149701 Jy ! Component: 3400 - total flux cleaned = 0.00137292 Jy ! Component: 3450 - total flux cleaned = 0.00132357 Jy ! Component: 3500 - total flux cleaned = 0.00123762 Jy ! Component: 3550 - total flux cleaned = 0.00121322 Jy ! Component: 3600 - total flux cleaned = 0.00112804 Jy ! Component: 3650 - total flux cleaned = 0.00109171 Jy ! Component: 3700 - total flux cleaned = 0.00100738 Jy ! Component: 3750 - total flux cleaned = 0.000935379 Jy ! Component: 3800 - total flux cleaned = 0.000911515 Jy ! Component: 3850 - total flux cleaned = 0.000828275 Jy ! Component: 3900 - total flux cleaned = 0.000757304 Jy ! Component: 3950 - total flux cleaned = 0.000745561 Jy ! Component: 4000 - total flux cleaned = 0.000686716 Jy ! Component: 4050 - total flux cleaned = 0.000639907 Jy ! Total flux subtracted in 4096 components = 0.000628227 Jy ! Clean residual min=-0.000746 max=0.000672 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.127521 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 327 components and 0.127521 Jy ![Exited script file: muppet] wmap "J0044+6803_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 10.88 at 84.8 degrees (North through East) ! Clean map min=-0.0012885 max=0.11421 Jy/beam ! Writing clean map to FITS file: J0044+6803_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114206 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201975 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.530553 0.530553 1.06111 2.12221 4.24442 8.48884 16.9777 33.9554 67.9107 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 10.88 at 84.8 degrees (North through East) ! Clean map min=-0.0012885 max=0.11421 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0044+6803_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:50 2017