! Started logfile: J0038-0329_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:41 2017 obs J0038-0329_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0038-0329_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0038-0329 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0038-0329_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.819361Jy sigma=0.010641 ! Fit after self-cal, rms=0.787740Jy sigma=0.010245 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=5.65 mas, bpa=1.912 degrees ! Estimated noise=950.882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161398 Jy ! Component: 100 - total flux cleaned = 0.199134 Jy ! Total flux subtracted in 100 components = 0.199134 Jy ! Clean residual min=-0.009561 max=0.015183 Jy/beam ! Clean residual mean=0.000016 rms=0.002735 Jy/beam ! Combined flux in latest and established models = 0.199134 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.199134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089961Jy sigma=0.001010 ! Fit after self-cal, rms=0.089974Jy sigma=0.001010 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=6.628 mas, bpa=1.366 degrees ! Estimated noise=719.853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230719 Jy ! Component: 100 - total flux cleaned = 0.0337943 Jy ! Component: 150 - total flux cleaned = 0.039697 Jy ! Component: 200 - total flux cleaned = 0.043375 Jy ! Total flux subtracted in 200 components = 0.043375 Jy ! Clean residual min=-0.005937 max=0.010165 Jy/beam ! Clean residual mean=0.000005 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.242509 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 0.242509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083756Jy sigma=0.000942 ! Fit after self-cal, rms=0.083764Jy sigma=0.000942 ! Inverting map ! Added new window around map position (4, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100314 Jy ! Component: 100 - total flux cleaned = 0.0144373 Jy ! Component: 150 - total flux cleaned = 0.0161038 Jy ! Component: 200 - total flux cleaned = 0.0174855 Jy ! Total flux subtracted in 200 components = 0.0174855 Jy ! Clean residual min=-0.004861 max=0.006134 Jy/beam ! Clean residual mean=0.000001 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.259994 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.259994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082555Jy sigma=0.000925 ! Fit after self-cal, rms=0.082259Jy sigma=0.000924 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 1.05 ! MK 1.01 NL 0.96 OV 0.98 PT 1.01 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 1.00 ! MK 0.98 NL 1.02 OV 1.03 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.83 ! MK 1.01 NL 1.00 OV 0.95 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.93 ! MK 1.01 NL 1.07 OV 1.02 PT 1.02 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.082259Jy sigma=0.000924 ! Fit after self-cal, rms=0.079123Jy sigma=0.000895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=6.653 mas, bpa=1.482 degrees ! Estimated noise=719.173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127371 Jy ! Component: 100 - total flux cleaned = -0.00172507 Jy ! Component: 150 - total flux cleaned = -0.00209596 Jy ! Component: 200 - total flux cleaned = -0.0024623 Jy ! Total flux subtracted in 200 components = -0.0024623 Jy ! Clean residual min=-0.003083 max=0.003257 Jy/beam ! Clean residual mean=-0.000003 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.257532 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 0.257532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079008Jy sigma=0.000894 ! Fit after self-cal, rms=0.078877Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078877Jy sigma=0.000894 ! Fit after self-cal, rms=0.079272Jy sigma=0.000890 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=6.649 mas, bpa=1.487 degrees ! Estimated noise=720.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162707 Jy ! Component: 100 - total flux cleaned = -0.00169915 Jy ! Component: 150 - total flux cleaned = -0.00176028 Jy ! Component: 200 - total flux cleaned = -0.00186841 Jy ! Total flux subtracted in 200 components = -0.00186841 Jy ! Clean residual min=-0.002488 max=0.002586 Jy/beam ! Clean residual mean=-0.000002 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.255664 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.255664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079223Jy sigma=0.000889 ! Fit after self-cal, rms=0.079226Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216973 Jy ! Component: 100 - total flux cleaned = -0.000215642 Jy ! Component: 150 - total flux cleaned = -0.000175953 Jy ! Component: 200 - total flux cleaned = -0.000194472 Jy ! Total flux subtracted in 200 components = -0.000194472 Jy ! Clean residual min=-0.002440 max=0.002606 Jy/beam ! Clean residual mean=-0.000002 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.255469 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.255469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079213Jy sigma=0.000889 ! Fit after self-cal, rms=0.079213Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079213Jy sigma=0.000889 ! Fit after self-cal, rms=0.079262Jy sigma=0.000889 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=6.652 mas, bpa=1.484 degrees ! Estimated noise=721.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000562531 Jy ! Component: 100 - total flux cleaned = -0.000563221 Jy ! Component: 150 - total flux cleaned = -0.000563469 Jy ! Component: 200 - total flux cleaned = -0.000563272 Jy ! Total flux subtracted in 200 components = -0.000563272 Jy ! Clean residual min=-0.002339 max=0.002420 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.254906 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.254906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079249Jy sigma=0.000889 ! Fit after self-cal, rms=0.079241Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.05548e-05 Jy ! Component: 100 - total flux cleaned = 5.83947e-06 Jy ! Component: 150 - total flux cleaned = 1.98724e-05 Jy ! Component: 200 - total flux cleaned = 1.99365e-05 Jy ! Total flux subtracted in 200 components = 1.99365e-05 Jy ! Clean residual min=-0.002338 max=0.002414 Jy/beam ! Clean residual mean=-0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.254926 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.254926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079236Jy sigma=0.000889 ! Fit after self-cal, rms=0.079237Jy sigma=0.000889 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079237Jy sigma=0.000889 ! Fit after self-cal, rms=0.079237Jy sigma=0.000889 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.545 mas, bmaj=12.53 mas, bpa=10.47 degrees ! Estimated noise=858.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295237 Jy ! Component: 100 - total flux cleaned = -0.000366092 Jy ! Component: 150 - total flux cleaned = -0.000395696 Jy ! Component: 200 - total flux cleaned = -0.000412932 Jy ! Total flux subtracted in 200 components = -0.000412932 Jy ! Clean residual min=-0.002430 max=0.002349 Jy/beam ! Clean residual mean=-0.000005 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.254513 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 0.254513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079237Jy sigma=0.000889 ! Fit after self-cal, rms=0.079230Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.26494e-06 Jy ! Component: 100 - total flux cleaned = 3.94107e-05 Jy ! Component: 150 - total flux cleaned = 3.95925e-05 Jy ! Component: 200 - total flux cleaned = 2.39561e-05 Jy ! Total flux subtracted in 200 components = 2.39561e-05 Jy ! Clean residual min=-0.002442 max=0.002332 Jy/beam ! Clean residual mean=-0.000005 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.254537 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 131 components and 0.254537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079231Jy sigma=0.000889 ! Fit after self-cal, rms=0.079231Jy sigma=0.000889 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=6.654 mas, bpa=1.485 degrees ! Estimated noise=721.796 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 6.654 at 1.485 degrees (North through East) ! Clean map min=-0.0031489 max=0.21407 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=5.682 mas, bpa=2.053 degrees ! Estimated noise=959.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162731 Jy ! Component: 100 - total flux cleaned = 0.201351 Jy ! Component: 150 - total flux cleaned = 0.219093 Jy ! Component: 200 - total flux cleaned = 0.229568 Jy ! Total flux subtracted in 200 components = 0.229568 Jy ! Clean residual min=-0.004896 max=0.005729 Jy/beam ! Clean residual mean=0.000005 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.229568 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.229568 Jy ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=6.654 mas, bpa=1.485 degrees ! Estimated noise=721.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00895067 Jy ! Component: 100 - total flux cleaned = 0.0144145 Jy ! Component: 150 - total flux cleaned = 0.0180955 Jy ! Component: 200 - total flux cleaned = 0.0203688 Jy ! Total flux subtracted in 200 components = 0.0203688 Jy ! Clean residual min=-0.002589 max=0.003157 Jy/beam ! Clean residual mean=-0.000000 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.249937 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.249937 Jy ! Inverting map ! Added new window around map position (-98.5, -100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023377 Jy ! Component: 100 - total flux cleaned = 0.00356006 Jy ! Component: 150 - total flux cleaned = 0.00428874 Jy ! Component: 200 - total flux cleaned = 0.00466472 Jy ! Total flux subtracted in 200 components = 0.00466472 Jy ! Clean residual min=-0.002525 max=0.002359 Jy/beam ! Clean residual mean=-0.000002 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.254602 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 59 components and 0.254601 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.545 mas, bmaj=12.53 mas, bpa=10.47 degrees ! Estimated noise=858.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103941 Jy ! Component: 100 - total flux cleaned = 0.00110638 Jy ! Component: 150 - total flux cleaned = 0.00116504 Jy ! Component: 200 - total flux cleaned = 0.0011681 Jy ! Total flux subtracted in 200 components = 0.0011681 Jy ! Clean residual min=-0.002543 max=0.002149 Jy/beam ! Clean residual mean=-0.000004 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.25577 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.95094e-05 Jy ! Component: 100 - total flux cleaned = -5.60116e-05 Jy ! Component: 150 - total flux cleaned = -7.30271e-05 Jy ! Component: 200 - total flux cleaned = -8.85943e-05 Jy ! Total flux subtracted in 200 components = -8.85943e-05 Jy ! Clean residual min=-0.002531 max=0.002090 Jy/beam ! Clean residual mean=-0.000004 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.255681 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 98 components and 0.255681 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=6.654 mas, bpa=1.485 degrees ! Estimated noise=721.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413978 Jy ! Component: 100 - total flux cleaned = -0.000242559 Jy ! Component: 150 - total flux cleaned = -8.49275e-05 Jy ! Component: 200 - total flux cleaned = -4.92798e-05 Jy ! Total flux subtracted in 200 components = -4.92798e-05 Jy ! Clean residual min=-0.002494 max=0.002366 Jy/beam ! Clean residual mean=-0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.255632 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.255632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079167Jy sigma=0.000888 ! Fit after self-cal, rms=0.079172Jy sigma=0.000888 wmodel J0038-0329_S_2014_01_04_pus_map.mod ! Writing 104 model components to file: J0038-0329_S_2014_01_04_pus_map.mod wobs J0038-0329_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0038-0329_S_2014_01_04_pus_uvs.fits wwins J0038-0329_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0038-0329_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413402 Jy ! Component: 100 - total flux cleaned = -0.000455857 Jy ! Component: 150 - total flux cleaned = -0.000274755 Jy ! Component: 200 - total flux cleaned = -3.5253e-05 Jy ! Component: 250 - total flux cleaned = 0.000193094 Jy ! Component: 300 - total flux cleaned = 0.000474271 Jy ! Component: 350 - total flux cleaned = 0.000747005 Jy ! Component: 400 - total flux cleaned = 0.00101089 Jy ! Component: 450 - total flux cleaned = 0.00118212 Jy ! Component: 500 - total flux cleaned = 0.00140327 Jy ! Component: 550 - total flux cleaned = 0.00156454 Jy ! Component: 600 - total flux cleaned = 0.00164296 Jy ! Component: 650 - total flux cleaned = 0.00172004 Jy ! Component: 700 - total flux cleaned = 0.0018205 Jy ! Component: 750 - total flux cleaned = 0.0017958 Jy ! Component: 800 - total flux cleaned = 0.0017477 Jy ! Component: 850 - total flux cleaned = 0.00174804 Jy ! Component: 900 - total flux cleaned = 0.00174825 Jy ! Component: 950 - total flux cleaned = 0.00170203 Jy ! Component: 1000 - total flux cleaned = 0.00165722 Jy ! Component: 1050 - total flux cleaned = 0.00161302 Jy ! Component: 1100 - total flux cleaned = 0.00154783 Jy ! Component: 1150 - total flux cleaned = 0.0015264 Jy ! Component: 1200 - total flux cleaned = 0.00152642 Jy ! Component: 1250 - total flux cleaned = 0.00146407 Jy ! Component: 1300 - total flux cleaned = 0.00140281 Jy ! Component: 1350 - total flux cleaned = 0.00144286 Jy ! Component: 1400 - total flux cleaned = 0.0014033 Jy ! Component: 1450 - total flux cleaned = 0.00142318 Jy ! Component: 1500 - total flux cleaned = 0.00148134 Jy ! Component: 1550 - total flux cleaned = 0.00148141 Jy ! Component: 1600 - total flux cleaned = 0.00151904 Jy ! Component: 1650 - total flux cleaned = 0.00148142 Jy ! Component: 1700 - total flux cleaned = 0.00148139 Jy ! Component: 1750 - total flux cleaned = 0.00148121 Jy ! Component: 1800 - total flux cleaned = 0.00144514 Jy ! Component: 1850 - total flux cleaned = 0.00144542 Jy ! Component: 1900 - total flux cleaned = 0.00146306 Jy ! Component: 1950 - total flux cleaned = 0.00141088 Jy ! Component: 2000 - total flux cleaned = 0.00144544 Jy ! Component: 2050 - total flux cleaned = 0.00141122 Jy ! Component: 2100 - total flux cleaned = 0.00144478 Jy ! Component: 2150 - total flux cleaned = 0.00142823 Jy ! Component: 2200 - total flux cleaned = 0.00149439 Jy ! Component: 2250 - total flux cleaned = 0.00154315 Jy ! Component: 2300 - total flux cleaned = 0.00154303 Jy ! Component: 2350 - total flux cleaned = 0.0014951 Jy ! Component: 2400 - total flux cleaned = 0.00152664 Jy ! Component: 2450 - total flux cleaned = 0.00152651 Jy ! Component: 2500 - total flux cleaned = 0.00157317 Jy ! Component: 2550 - total flux cleaned = 0.00158867 Jy ! Component: 2600 - total flux cleaned = 0.0015888 Jy ! Component: 2650 - total flux cleaned = 0.00158877 Jy ! Component: 2700 - total flux cleaned = 0.00157369 Jy ! Component: 2750 - total flux cleaned = 0.0016178 Jy ! Component: 2800 - total flux cleaned = 0.00161761 Jy ! Component: 2850 - total flux cleaned = 0.00163208 Jy ! Component: 2900 - total flux cleaned = 0.0016895 Jy ! Component: 2950 - total flux cleaned = 0.00166089 Jy ! Component: 3000 - total flux cleaned = 0.0016749 Jy ! Component: 3050 - total flux cleaned = 0.00167501 Jy ! Component: 3100 - total flux cleaned = 0.00164727 Jy ! Component: 3150 - total flux cleaned = 0.00166102 Jy ! Component: 3200 - total flux cleaned = 0.00163393 Jy ! Component: 3250 - total flux cleaned = 0.00158007 Jy ! Component: 3300 - total flux cleaned = 0.00160687 Jy ! Component: 3350 - total flux cleaned = 0.00148732 Jy ! Component: 3400 - total flux cleaned = 0.00147428 Jy ! Component: 3450 - total flux cleaned = 0.00146119 Jy ! Component: 3500 - total flux cleaned = 0.00144809 Jy ! Component: 3550 - total flux cleaned = 0.00144809 Jy ! Component: 3600 - total flux cleaned = 0.00144801 Jy ! Component: 3650 - total flux cleaned = 0.00144805 Jy ! Component: 3700 - total flux cleaned = 0.00147319 Jy ! Component: 3750 - total flux cleaned = 0.0014857 Jy ! Component: 3800 - total flux cleaned = 0.00144845 Jy ! Component: 3850 - total flux cleaned = 0.00148542 Jy ! Component: 3900 - total flux cleaned = 0.00148539 Jy ! Component: 3950 - total flux cleaned = 0.00150982 Jy ! Component: 4000 - total flux cleaned = 0.00150975 Jy ! Component: 4050 - total flux cleaned = 0.00152166 Jy ! Total flux subtracted in 4096 components = 0.00152161 Jy ! Clean residual min=-0.000707 max=0.000642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.257153 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 363 components and 0.257153 Jy ![Exited script file: muppet] wmap "J0038-0329_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 6.654 at 1.485 degrees (North through East) ! Clean map min=-0.0016705 max=0.21489 Jy/beam ! Writing clean map to FITS file: J0038-0329_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.214886 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202012 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.282027 0.282027 0.564054 1.12811 2.25621 4.51243 9.02486 18.0497 36.0994 72.1989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.214 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 6.654 at 1.485 degrees (North through East) ! Clean map min=-0.0016705 max=0.21489 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0038-0329_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:46 2017