! Started logfile: J0038+4137_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:00:01 2017 obs J0038+4137_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0038+4137_S_2015_01_23_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.522222 visibilities/baseline/integration-bin. ! Found source: J0038+4137 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0038+4137_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.759510Jy sigma=0.009997 ! Fit after self-cal, rms=0.751381Jy sigma=0.009891 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=8.368 mas, bpa=-14.05 degrees ! Estimated noise=1463.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188597 Jy ! Component: 100 - total flux cleaned = 0.240682 Jy ! Total flux subtracted in 100 components = 0.240682 Jy ! Clean residual min=-0.014765 max=0.024114 Jy/beam ! Clean residual mean=0.000085 rms=0.004745 Jy/beam ! Combined flux in latest and established models = 0.240682 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.240682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101193Jy sigma=0.001229 ! Fit after self-cal, rms=0.101117Jy sigma=0.001228 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=8.245 mas, bpa=-12.67 degrees ! Estimated noise=1104.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0384001 Jy ! Component: 100 - total flux cleaned = 0.0585535 Jy ! Component: 150 - total flux cleaned = 0.0721131 Jy ! Component: 200 - total flux cleaned = 0.0819907 Jy ! Total flux subtracted in 200 components = 0.0819907 Jy ! Clean residual min=-0.014857 max=0.020249 Jy/beam ! Clean residual mean=0.000076 rms=0.004739 Jy/beam ! Combined flux in latest and established models = 0.322672 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.322672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083722Jy sigma=0.001020 ! Fit after self-cal, rms=0.083589Jy sigma=0.001018 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.98 KP 1.04 ! LA 0.92 MK 1.03 NL 1.01 OV 1.07 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.03 KP 0.97 ! LA 0.88 MK 1.01 NL 1.18 OV 1.10 ! PT 0.93 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.10 KP 0.82 ! LA 0.72 MK 1.01 NL 1.25 OV 1.02 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 1.06 KP 0.75 ! LA 0.79 MK 1.00 NL 1.06 OV 1.10 ! PT 0.94 SC 0.96 ! ! ! Fit before self-cal, rms=0.083589Jy sigma=0.001018 ! Fit after self-cal, rms=0.067588Jy sigma=0.000869 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=8.333 mas, bpa=-12.55 degrees ! Estimated noise=1089.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172278 Jy ! Component: 100 - total flux cleaned = 0.0262183 Jy ! Component: 150 - total flux cleaned = 0.0313955 Jy ! Component: 200 - total flux cleaned = 0.0333831 Jy ! Total flux subtracted in 200 components = 0.0333831 Jy ! Clean residual min=-0.005128 max=0.007102 Jy/beam ! Clean residual mean=0.000007 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.356055 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 0.356055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062859Jy sigma=0.000796 ! Fit after self-cal, rms=0.062662Jy sigma=0.000793 ! Inverting map ! Added new window around map position (4.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550223 Jy ! Component: 100 - total flux cleaned = 0.0055185 Jy ! Component: 150 - total flux cleaned = 0.00520956 Jy ! Component: 200 - total flux cleaned = 0.00481983 Jy ! Total flux subtracted in 200 components = 0.00481983 Jy ! Clean residual min=-0.004244 max=0.004811 Jy/beam ! Clean residual mean=0.000003 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.360875 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.360875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061598Jy sigma=0.000779 ! Fit after self-cal, rms=0.061534Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061534Jy sigma=0.000778 ! Fit after self-cal, rms=0.060709Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=8.316 mas, bpa=-12.49 degrees ! Estimated noise=1084.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401504 Jy ! Component: 100 - total flux cleaned = 0.00561826 Jy ! Component: 150 - total flux cleaned = 0.00600299 Jy ! Component: 200 - total flux cleaned = 0.00600603 Jy ! Total flux subtracted in 200 components = 0.00600603 Jy ! Clean residual min=-0.003721 max=0.003397 Jy/beam ! Clean residual mean=0.000002 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.366881 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 107 components and 0.366881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060353Jy sigma=0.000770 ! Fit after self-cal, rms=0.060327Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085951 Jy ! Component: 100 - total flux cleaned = 0.000862849 Jy ! Component: 150 - total flux cleaned = 0.000599852 Jy ! Component: 200 - total flux cleaned = 0.000295508 Jy ! Total flux subtracted in 200 components = 0.000295508 Jy ! Clean residual min=-0.003724 max=0.003134 Jy/beam ! Clean residual mean=0.000002 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.367177 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 121 components and 0.367177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060197Jy sigma=0.000767 ! Fit after self-cal, rms=0.060192Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060192Jy sigma=0.000767 ! Fit after self-cal, rms=0.060154Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=8.308 mas, bpa=-12.49 degrees ! Estimated noise=1084.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201559 Jy ! Component: 100 - total flux cleaned = 0.00283324 Jy ! Component: 150 - total flux cleaned = 0.00308098 Jy ! Component: 200 - total flux cleaned = 0.00303703 Jy ! Total flux subtracted in 200 components = 0.00303703 Jy ! Clean residual min=-0.003592 max=0.002907 Jy/beam ! Clean residual mean=0.000003 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.370214 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 147 components and 0.370214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060062Jy sigma=0.000765 ! Fit after self-cal, rms=0.060055Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383653 Jy ! Component: 100 - total flux cleaned = 0.000344877 Jy ! Component: 150 - total flux cleaned = 0.000230717 Jy ! Component: 200 - total flux cleaned = 8.82721e-05 Jy ! Total flux subtracted in 200 components = 8.82721e-05 Jy ! Clean residual min=-0.003588 max=0.002792 Jy/beam ! Clean residual mean=0.000003 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.370302 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 165 components and 0.370302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060014Jy sigma=0.000765 ! Fit after self-cal, rms=0.060013Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060013Jy sigma=0.000765 ! Fit after self-cal, rms=0.060050Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.633 mas, bmaj=9.607 mas, bpa=-10.78 degrees ! Estimated noise=1411.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179213 Jy ! Component: 100 - total flux cleaned = 0.00221745 Jy ! Component: 150 - total flux cleaned = 0.00226161 Jy ! Component: 200 - total flux cleaned = 0.00229638 Jy ! Total flux subtracted in 200 components = 0.00229638 Jy ! Clean residual min=-0.004578 max=0.003362 Jy/beam ! Clean residual mean=0.000009 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.372598 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 189 components and 0.372598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060023Jy sigma=0.000764 ! Fit after self-cal, rms=0.060016Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118331 Jy ! Component: 100 - total flux cleaned = -0.000121254 Jy ! Component: 150 - total flux cleaned = -0.000120131 Jy ! Component: 200 - total flux cleaned = -9.68603e-05 Jy ! Total flux subtracted in 200 components = -9.68603e-05 Jy ! Clean residual min=-0.004550 max=0.003216 Jy/beam ! Clean residual mean=0.000009 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.372501 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 203 components and 0.372501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060007Jy sigma=0.000764 ! Fit after self-cal, rms=0.060006Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=8.303 mas, bpa=-12.49 degrees ! Estimated noise=1085.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.714 x 8.303 at -12.49 degrees (North through East) ! Clean map min=-0.0035436 max=0.24817 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=8.423 mas, bpa=-13.82 degrees ! Estimated noise=1442.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185203 Jy ! Component: 100 - total flux cleaned = 0.236298 Jy ! Component: 150 - total flux cleaned = 0.264826 Jy ! Component: 200 - total flux cleaned = 0.283982 Jy ! Total flux subtracted in 200 components = 0.283982 Jy ! Clean residual min=-0.008679 max=0.010643 Jy/beam ! Clean residual mean=0.000036 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.283982 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.283982 Jy ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=8.303 mas, bpa=-12.49 degrees ! Estimated noise=1085.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019908 Jy ! Component: 100 - total flux cleaned = 0.0340065 Jy ! Component: 150 - total flux cleaned = 0.0444775 Jy ! Component: 200 - total flux cleaned = 0.0526495 Jy ! Total flux subtracted in 200 components = 0.0526495 Jy ! Clean residual min=-0.005980 max=0.006256 Jy/beam ! Clean residual mean=0.000027 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.336632 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 57 components and 0.336632 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.633 mas, bmaj=9.607 mas, bpa=-10.78 degrees ! Estimated noise=1411.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132855 Jy ! Component: 100 - total flux cleaned = 0.0214717 Jy ! Component: 150 - total flux cleaned = 0.0270445 Jy ! Component: 200 - total flux cleaned = 0.0307141 Jy ! Total flux subtracted in 200 components = 0.0307141 Jy ! Clean residual min=-0.004707 max=0.004614 Jy/beam ! Clean residual mean=0.000019 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.367346 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146352 Jy ! Component: 100 - total flux cleaned = 0.00206926 Jy ! Component: 150 - total flux cleaned = 0.00276361 Jy ! Component: 200 - total flux cleaned = 0.00321352 Jy ! Total flux subtracted in 200 components = 0.00321352 Jy ! Clean residual min=-0.004362 max=0.003619 Jy/beam ! Clean residual mean=0.000013 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.370559 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 146 components and 0.370559 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=8.303 mas, bpa=-12.49 degrees ! Estimated noise=1085.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101897 Jy ! Component: 100 - total flux cleaned = 0.00125727 Jy ! Component: 150 - total flux cleaned = 0.00132296 Jy ! Component: 200 - total flux cleaned = 0.00125921 Jy ! Total flux subtracted in 200 components = 0.00125921 Jy ! Clean residual min=-0.003310 max=0.003172 Jy/beam ! Clean residual mean=0.000004 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.371819 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 166 components and 0.371819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060218Jy sigma=0.000767 ! Fit after self-cal, rms=0.060170Jy sigma=0.000766 wmodel J0038+4137_S_2015_01_23_pus_map.mod ! Writing 166 model components to file: J0038+4137_S_2015_01_23_pus_map.mod wobs J0038+4137_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0038+4137_S_2015_01_23_pus_uvs.fits wwins J0038+4137_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0038+4137_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000806553 Jy ! Component: 100 - total flux cleaned = -0.000966909 Jy ! Component: 150 - total flux cleaned = -0.00116562 Jy ! Component: 200 - total flux cleaned = -0.00116618 Jy ! Component: 250 - total flux cleaned = -0.00129811 Jy ! Component: 300 - total flux cleaned = -0.00125479 Jy ! Component: 350 - total flux cleaned = -0.00125513 Jy ! Component: 400 - total flux cleaned = -0.00121779 Jy ! Component: 450 - total flux cleaned = -0.00125548 Jy ! Component: 500 - total flux cleaned = -0.00129075 Jy ! Component: 550 - total flux cleaned = -0.00139717 Jy ! Component: 600 - total flux cleaned = -0.00153317 Jy ! Component: 650 - total flux cleaned = -0.00156534 Jy ! Component: 700 - total flux cleaned = -0.00156541 Jy ! Component: 750 - total flux cleaned = -0.00159723 Jy ! Component: 800 - total flux cleaned = -0.00165768 Jy ! Component: 850 - total flux cleaned = -0.00165811 Jy ! Component: 900 - total flux cleaned = -0.00162974 Jy ! Component: 950 - total flux cleaned = -0.00165844 Jy ! Component: 1000 - total flux cleaned = -0.00165755 Jy ! Component: 1050 - total flux cleaned = -0.00168411 Jy ! Component: 1100 - total flux cleaned = -0.00165861 Jy ! Component: 1150 - total flux cleaned = -0.00171053 Jy ! Component: 1200 - total flux cleaned = -0.00181132 Jy ! Component: 1250 - total flux cleaned = -0.00181019 Jy ! Component: 1300 - total flux cleaned = -0.0018825 Jy ! Component: 1350 - total flux cleaned = -0.00185858 Jy ! Component: 1400 - total flux cleaned = -0.0018595 Jy ! Component: 1450 - total flux cleaned = -0.00192756 Jy ! Component: 1500 - total flux cleaned = -0.00188286 Jy ! Component: 1550 - total flux cleaned = -0.00181721 Jy ! Component: 1600 - total flux cleaned = -0.00168831 Jy ! Component: 1650 - total flux cleaned = -0.00168851 Jy ! Component: 1700 - total flux cleaned = -0.00154311 Jy ! Component: 1750 - total flux cleaned = -0.0015231 Jy ! Component: 1800 - total flux cleaned = -0.00144265 Jy ! Component: 1850 - total flux cleaned = -0.00134404 Jy ! Component: 1900 - total flux cleaned = -0.00132437 Jy ! Component: 1950 - total flux cleaned = -0.00126662 Jy ! Component: 2000 - total flux cleaned = -0.00117231 Jy ! Component: 2050 - total flux cleaned = -0.00111695 Jy ! Component: 2100 - total flux cleaned = -0.00100819 Jy ! Component: 2150 - total flux cleaned = -0.00104441 Jy ! Component: 2200 - total flux cleaned = -0.00100901 Jy ! Component: 2250 - total flux cleaned = -0.000939172 Jy ! Component: 2300 - total flux cleaned = -0.000887661 Jy ! Component: 2350 - total flux cleaned = -0.000819797 Jy ! Component: 2400 - total flux cleaned = -0.000786419 Jy ! Component: 2450 - total flux cleaned = -0.000703849 Jy ! Component: 2500 - total flux cleaned = -0.000655023 Jy ! Component: 2550 - total flux cleaned = -0.000558684 Jy ! Component: 2600 - total flux cleaned = -0.000558543 Jy ! Component: 2650 - total flux cleaned = -0.000495835 Jy ! Component: 2700 - total flux cleaned = -0.00043422 Jy ! Component: 2750 - total flux cleaned = -0.000388238 Jy ! Component: 2800 - total flux cleaned = -0.000312595 Jy ! Component: 2850 - total flux cleaned = -0.000237679 Jy ! Component: 2900 - total flux cleaned = -0.000104734 Jy ! Component: 2950 - total flux cleaned = -3.15864e-05 Jy ! Component: 3000 - total flux cleaned = 4.03745e-05 Jy ! Component: 3050 - total flux cleaned = 9.73663e-05 Jy ! Component: 3100 - total flux cleaned = 0.00021059 Jy ! Component: 3150 - total flux cleaned = 0.000238639 Jy ! Component: 3200 - total flux cleaned = 0.000294275 Jy ! Component: 3250 - total flux cleaned = 0.000362919 Jy ! Component: 3300 - total flux cleaned = 0.000444166 Jy ! Component: 3350 - total flux cleaned = 0.000484501 Jy ! Component: 3400 - total flux cleaned = 0.000537824 Jy ! Component: 3450 - total flux cleaned = 0.000577493 Jy ! Component: 3500 - total flux cleaned = 0.000681994 Jy ! Component: 3550 - total flux cleaned = 0.000733712 Jy ! Component: 3600 - total flux cleaned = 0.000836334 Jy ! Component: 3650 - total flux cleaned = 0.000912673 Jy ! Component: 3700 - total flux cleaned = 0.000988419 Jy ! Component: 3750 - total flux cleaned = 0.00105082 Jy ! Component: 3800 - total flux cleaned = 0.0011626 Jy ! Component: 3850 - total flux cleaned = 0.0012364 Jy ! Component: 3900 - total flux cleaned = 0.0013098 Jy ! Component: 3950 - total flux cleaned = 0.00144339 Jy ! Component: 4000 - total flux cleaned = 0.00152778 Jy ! Component: 4050 - total flux cleaned = 0.00155183 Jy ! Total flux subtracted in 4096 components = 0.00158745 Jy ! Clean residual min=-0.000763 max=0.000694 Jy/beam ! Clean residual mean=0.000001 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.373406 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 450 components and 0.373406 Jy ![Exited script file: muppet] wmap "J0038+4137_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.714 x 8.303 at -12.49 degrees (North through East) ! Clean map min=-0.0020978 max=0.25161 Jy/beam ! Writing clean map to FITS file: J0038+4137_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.251613 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202124 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.240993 0.240993 0.481986 0.963972 1.92794 3.85589 7.71178 15.4236 30.8471 61.6942 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.251 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.714 x 8.303 at -12.49 degrees (North through East) ! Clean map min=-0.0020978 max=0.25161 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0038+4137_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:00:06 2017