! Started logfile: J0037+3659_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:33 2017 obs J0037+3659_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0037+3659_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0037+3659 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0037+3659_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964033Jy sigma=0.015129 ! Fit after self-cal, rms=0.940530Jy sigma=0.014853 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=4.7 mas, bpa=2.31 degrees ! Estimated noise=936.073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465645 Jy ! Component: 100 - total flux cleaned = 0.057814 Jy ! Total flux subtracted in 100 components = 0.057814 Jy ! Clean residual min=-0.004608 max=0.006153 Jy/beam ! Clean residual mean=0.000013 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.0578139 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0578139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070669Jy sigma=0.000936 ! Fit after self-cal, rms=0.070574Jy sigma=0.000935 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=5.723 mas, bpa=-1.984 degrees ! Estimated noise=498.969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608546 Jy ! Component: 100 - total flux cleaned = 0.00899234 Jy ! Component: 150 - total flux cleaned = 0.0106589 Jy ! Component: 200 - total flux cleaned = 0.0117293 Jy ! Total flux subtracted in 200 components = 0.0117293 Jy ! Clean residual min=-0.004862 max=0.005542 Jy/beam ! Clean residual mean=0.000013 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.0695433 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.0695433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070031Jy sigma=0.000928 ! Fit after self-cal, rms=0.070023Jy sigma=0.000927 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 1.00 ! MK 1.02 NL 1.15 OV 1.03 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.94 ! MK 0.89 NL 1.20 OV 1.06 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.76 ! MK 0.97 NL 1.08 OV 0.94 PT 0.96 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.83 ! MK 0.96 NL 1.13 OV 1.12 PT 0.99 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.070023Jy sigma=0.000927 ! Fit after self-cal, rms=0.067278Jy sigma=0.000920 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=5.691 mas, bpa=-1.975 degrees ! Estimated noise=494.883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809589 Jy ! Component: 100 - total flux cleaned = 0.000889269 Jy ! Component: 150 - total flux cleaned = 0.000955134 Jy ! Component: 200 - total flux cleaned = 0.00101602 Jy ! Total flux subtracted in 200 components = 0.00101602 Jy ! Clean residual min=-0.003895 max=0.004927 Jy/beam ! Clean residual mean=0.000010 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.0705593 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0705593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067256Jy sigma=0.000919 ! Fit after self-cal, rms=0.067235Jy sigma=0.000919 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067235Jy sigma=0.000919 ! Fit after self-cal, rms=0.066807Jy sigma=0.000916 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=5.689 mas, bpa=-2.754 degrees ! Estimated noise=493.823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293893 Jy ! Component: 100 - total flux cleaned = 0.000343737 Jy ! Component: 150 - total flux cleaned = 0.000435531 Jy ! Component: 200 - total flux cleaned = 0.000499983 Jy ! Total flux subtracted in 200 components = 0.000499983 Jy ! Clean residual min=-0.003760 max=0.004489 Jy/beam ! Clean residual mean=0.000004 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.0710593 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.0710593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066786Jy sigma=0.000916 ! Fit after self-cal, rms=0.066848Jy sigma=0.000916 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.9547e-05 Jy ! Component: 100 - total flux cleaned = 0.000146352 Jy ! Component: 150 - total flux cleaned = 0.000215344 Jy ! Component: 200 - total flux cleaned = 0.000264217 Jy ! Total flux subtracted in 200 components = 0.000264217 Jy ! Clean residual min=-0.003801 max=0.004467 Jy/beam ! Clean residual mean=0.000004 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.0713235 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0713235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066836Jy sigma=0.000915 ! Fit after self-cal, rms=0.066848Jy sigma=0.000915 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066848Jy sigma=0.000915 ! Fit after self-cal, rms=0.066256Jy sigma=0.000915 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=5.666 mas, bpa=-3.48 degrees ! Estimated noise=491.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250135 Jy ! Component: 100 - total flux cleaned = 0.000314739 Jy ! Component: 150 - total flux cleaned = 0.000392892 Jy ! Component: 200 - total flux cleaned = 0.000429639 Jy ! Total flux subtracted in 200 components = 0.000429639 Jy ! Clean residual min=-0.003733 max=0.004336 Jy/beam ! Clean residual mean=0.000003 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.0717531 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0717531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066240Jy sigma=0.000915 ! Fit after self-cal, rms=0.066257Jy sigma=0.000915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.60894e-05 Jy ! Component: 100 - total flux cleaned = 0.000125299 Jy ! Component: 150 - total flux cleaned = 0.00015596 Jy ! Component: 200 - total flux cleaned = 0.000200061 Jy ! Total flux subtracted in 200 components = 0.000200061 Jy ! Clean residual min=-0.003750 max=0.004354 Jy/beam ! Clean residual mean=0.000003 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.0719532 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0719532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066249Jy sigma=0.000915 ! Fit after self-cal, rms=0.066257Jy sigma=0.000915 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066257Jy sigma=0.000915 ! Fit after self-cal, rms=0.065631Jy sigma=0.000915 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.773 mas, bmaj=9.652 mas, bpa=15.42 degrees ! Estimated noise=565.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169371 Jy ! Component: 100 - total flux cleaned = 0.00230578 Jy ! Component: 150 - total flux cleaned = 0.00250427 Jy ! Component: 200 - total flux cleaned = 0.00272206 Jy ! Total flux subtracted in 200 components = 0.00272206 Jy ! Clean residual min=-0.005167 max=0.006174 Jy/beam ! Clean residual mean=0.000002 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.0746752 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.0746752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065656Jy sigma=0.000915 ! Fit after self-cal, rms=0.065604Jy sigma=0.000915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349088 Jy ! Component: 100 - total flux cleaned = 0.000548267 Jy ! Component: 150 - total flux cleaned = 0.000707582 Jy ! Component: 200 - total flux cleaned = 0.000881693 Jy ! Total flux subtracted in 200 components = 0.000881693 Jy ! Clean residual min=-0.005106 max=0.006109 Jy/beam ! Clean residual mean=0.000001 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.0755569 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.0755569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065615Jy sigma=0.000915 ! Fit after self-cal, rms=0.065587Jy sigma=0.000915 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=5.643 mas, bpa=-4.225 degrees ! Estimated noise=488.997 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 5.643 at -4.225 degrees (North through East) ! Clean map min=-0.00355 max=0.057492 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=4.621 mas, bpa=-0.4774 degrees ! Estimated noise=907.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451257 Jy ! Component: 100 - total flux cleaned = 0.0570349 Jy ! Component: 150 - total flux cleaned = 0.0622357 Jy ! Component: 200 - total flux cleaned = 0.0652963 Jy ! Total flux subtracted in 200 components = 0.0652963 Jy ! Clean residual min=-0.004605 max=0.004914 Jy/beam ! Clean residual mean=0.000006 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.0652963 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0652963 Jy ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=5.643 mas, bpa=-4.225 degrees ! Estimated noise=488.997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333852 Jy ! Component: 100 - total flux cleaned = 0.00507184 Jy ! Component: 150 - total flux cleaned = 0.0061383 Jy ! Component: 200 - total flux cleaned = 0.00682201 Jy ! Total flux subtracted in 200 components = 0.00682201 Jy ! Clean residual min=-0.003793 max=0.004504 Jy/beam ! Clean residual mean=0.000004 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.0721183 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.0721183 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.773 mas, bmaj=9.652 mas, bpa=15.42 degrees ! Estimated noise=565.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176104 Jy ! Component: 100 - total flux cleaned = 0.00234953 Jy ! Component: 150 - total flux cleaned = 0.0025616 Jy ! Component: 200 - total flux cleaned = 0.00279354 Jy ! Total flux subtracted in 200 components = 0.00279354 Jy ! Clean residual min=-0.005178 max=0.006260 Jy/beam ! Clean residual mean=0.000002 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.0749119 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216645 Jy ! Component: 100 - total flux cleaned = 0.00038993 Jy ! Component: 150 - total flux cleaned = 0.000580099 Jy ! Component: 200 - total flux cleaned = 0.000732038 Jy ! Total flux subtracted in 200 components = 0.000732038 Jy ! Clean residual min=-0.005098 max=0.006156 Jy/beam ! Clean residual mean=0.000001 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.0756439 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0756439 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=5.643 mas, bpa=-4.225 degrees ! Estimated noise=488.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112575 Jy ! Component: 100 - total flux cleaned = -0.00137103 Jy ! Component: 150 - total flux cleaned = -0.00146108 Jy ! Component: 200 - total flux cleaned = -0.00154247 Jy ! Total flux subtracted in 200 components = -0.00154247 Jy ! Clean residual min=-0.003817 max=0.004488 Jy/beam ! Clean residual mean=0.000002 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.0741014 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.0741014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065578Jy sigma=0.000916 ! Fit after self-cal, rms=0.065587Jy sigma=0.000915 wmodel J0037+3659_S_2014_01_04_pus_map.mod ! Writing 41 model components to file: J0037+3659_S_2014_01_04_pus_map.mod wobs J0037+3659_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0037+3659_S_2014_01_04_pus_uvs.fits wwins J0037+3659_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0037+3659_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171548 Jy ! Component: 100 - total flux cleaned = 0.00245538 Jy ! Component: 150 - total flux cleaned = 0.00275666 Jy ! Component: 200 - total flux cleaned = 0.00292498 Jy ! Component: 250 - total flux cleaned = 0.00292584 Jy ! Component: 300 - total flux cleaned = 0.00287795 Jy ! Component: 350 - total flux cleaned = 0.00273966 Jy ! Component: 400 - total flux cleaned = 0.0026952 Jy ! Component: 450 - total flux cleaned = 0.00252558 Jy ! Component: 500 - total flux cleaned = 0.00228241 Jy ! Component: 550 - total flux cleaned = 0.00208833 Jy ! Component: 600 - total flux cleaned = 0.00201633 Jy ! Component: 650 - total flux cleaned = 0.00201697 Jy ! Component: 700 - total flux cleaned = 0.00198249 Jy ! Component: 750 - total flux cleaned = 0.00198221 Jy ! Component: 800 - total flux cleaned = 0.00188745 Jy ! Component: 850 - total flux cleaned = 0.0018885 Jy ! Component: 900 - total flux cleaned = 0.00188893 Jy ! Component: 950 - total flux cleaned = 0.00188953 Jy ! Component: 1000 - total flux cleaned = 0.00183527 Jy ! Component: 1050 - total flux cleaned = 0.00183567 Jy ! Component: 1100 - total flux cleaned = 0.00188716 Jy ! Component: 1150 - total flux cleaned = 0.00191266 Jy ! Component: 1200 - total flux cleaned = 0.00196084 Jy ! Component: 1250 - total flux cleaned = 0.00200737 Jy ! Component: 1300 - total flux cleaned = 0.00205263 Jy ! Component: 1350 - total flux cleaned = 0.00205231 Jy ! Component: 1400 - total flux cleaned = 0.00203115 Jy ! Component: 1450 - total flux cleaned = 0.00203147 Jy ! Component: 1500 - total flux cleaned = 0.00205173 Jy ! Component: 1550 - total flux cleaned = 0.00205196 Jy ! Component: 1600 - total flux cleaned = 0.00207089 Jy ! Component: 1650 - total flux cleaned = 0.0020897 Jy ! Component: 1700 - total flux cleaned = 0.00212579 Jy ! Component: 1750 - total flux cleaned = 0.00214276 Jy ! Component: 1800 - total flux cleaned = 0.00217616 Jy ! Component: 1850 - total flux cleaned = 0.00219279 Jy ! Component: 1900 - total flux cleaned = 0.00225733 Jy ! Component: 1950 - total flux cleaned = 0.00225743 Jy ! Component: 2000 - total flux cleaned = 0.00230411 Jy ! Component: 2050 - total flux cleaned = 0.00233433 Jy ! Component: 2100 - total flux cleaned = 0.00230457 Jy ! Component: 2150 - total flux cleaned = 0.00227521 Jy ! Component: 2200 - total flux cleaned = 0.00221814 Jy ! Component: 2250 - total flux cleaned = 0.00220409 Jy ! Component: 2300 - total flux cleaned = 0.00216298 Jy ! Component: 2350 - total flux cleaned = 0.00212273 Jy ! Component: 2400 - total flux cleaned = 0.00210964 Jy ! Component: 2450 - total flux cleaned = 0.00212263 Jy ! Component: 2500 - total flux cleaned = 0.00210966 Jy ! Component: 2550 - total flux cleaned = 0.00212196 Jy ! Component: 2600 - total flux cleaned = 0.00210934 Jy ! Component: 2650 - total flux cleaned = 0.00212143 Jy ! Component: 2700 - total flux cleaned = 0.00210933 Jy ! Component: 2750 - total flux cleaned = 0.00208563 Jy ! Component: 2800 - total flux cleaned = 0.00208562 Jy ! Component: 2850 - total flux cleaned = 0.00206251 Jy ! Component: 2900 - total flux cleaned = 0.0020853 Jy ! Component: 2950 - total flux cleaned = 0.00198338 Jy ! Component: 3000 - total flux cleaned = 0.00197238 Jy ! Component: 3050 - total flux cleaned = 0.00197238 Jy ! Component: 3100 - total flux cleaned = 0.0019504 Jy ! Component: 3150 - total flux cleaned = 0.00191776 Jy ! Component: 3200 - total flux cleaned = 0.00186399 Jy ! Component: 3250 - total flux cleaned = 0.00183198 Jy ! Component: 3300 - total flux cleaned = 0.00177896 Jy ! Component: 3350 - total flux cleaned = 0.00170525 Jy ! Component: 3400 - total flux cleaned = 0.00162153 Jy ! Component: 3450 - total flux cleaned = 0.00157993 Jy ! Component: 3500 - total flux cleaned = 0.00152819 Jy ! Component: 3550 - total flux cleaned = 0.00143562 Jy ! Component: 3600 - total flux cleaned = 0.00137421 Jy ! Component: 3650 - total flux cleaned = 0.00130294 Jy ! Component: 3700 - total flux cleaned = 0.00125223 Jy ! Component: 3750 - total flux cleaned = 0.00121177 Jy ! Component: 3800 - total flux cleaned = 0.00119157 Jy ! Component: 3850 - total flux cleaned = 0.00112107 Jy ! Component: 3900 - total flux cleaned = 0.00110095 Jy ! Component: 3950 - total flux cleaned = 0.00106074 Jy ! Component: 4000 - total flux cleaned = 0.000990458 Jy ! Component: 4050 - total flux cleaned = 0.000960363 Jy ! Total flux subtracted in 4096 components = 0.000940316 Jy ! Clean residual min=-0.000582 max=0.000739 Jy/beam ! Clean residual mean=-0.000002 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.0750417 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 321 components and 0.0750418 Jy ![Exited script file: muppet] wmap "J0037+3659_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 5.643 at -4.225 degrees (North through East) ! Clean map min=-0.0013603 max=0.057157 Jy/beam ! Writing clean map to FITS file: J0037+3659_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.057157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162199 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.851331 0.851331 1.70266 3.40533 6.81065 13.6213 27.2426 54.4852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 5.643 at -4.225 degrees (North through East) ! Clean map min=-0.0013603 max=0.057157 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0037+3659_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:37 2017