! Started logfile: J0037+2407_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:40:39 2016 obs J0037+2407_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0037+2407_S_2014_05_31_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.982149 visibilities/baseline/integration-bin. ! Found source: J0037+2407 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 21568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0037+2407_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941925Jy sigma=0.011760 ! Fit after self-cal, rms=0.910547Jy sigma=0.011381 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=5.93 mas, bpa=-2.009 degrees ! Estimated noise=584.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066437 Jy ! Component: 100 - total flux cleaned = 0.0940517 Jy ! Total flux subtracted in 100 components = 0.0940517 Jy ! Clean residual min=-0.012675 max=0.032931 Jy/beam ! Clean residual mean=-0.000035 rms=0.004313 Jy/beam ! Combined flux in latest and established models = 0.0940517 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0940517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124471Jy sigma=0.001594 ! Fit after self-cal, rms=0.124105Jy sigma=0.001589 ! Inverting map ! Added new window around map position (-5, 5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290191 Jy ! Component: 100 - total flux cleaned = 0.0463185 Jy ! Total flux subtracted in 100 components = 0.0463185 Jy ! Clean residual min=-0.011801 max=0.025036 Jy/beam ! Clean residual mean=-0.000033 rms=0.003756 Jy/beam ! Combined flux in latest and established models = 0.14037 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.14037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113563Jy sigma=0.001446 ! Fit after self-cal, rms=0.111199Jy sigma=0.001417 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231217 Jy ! Component: 100 - total flux cleaned = 0.0370124 Jy ! Total flux subtracted in 100 components = 0.0370124 Jy ! Clean residual min=-0.010823 max=0.020112 Jy/beam ! Clean residual mean=-0.000026 rms=0.003277 Jy/beam ! Combined flux in latest and established models = 0.177383 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.177383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103740Jy sigma=0.001313 ! Fit after self-cal, rms=0.102470Jy sigma=0.001298 ! Inverting map ! Added new window around map position (-10.5, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021691 Jy ! Component: 100 - total flux cleaned = 0.0347715 Jy ! Total flux subtracted in 100 components = 0.0347715 Jy ! Clean residual min=-0.008949 max=0.013222 Jy/beam ! Clean residual mean=-0.000022 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.212154 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.212154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095770Jy sigma=0.001203 ! Fit after self-cal, rms=0.094805Jy sigma=0.001192 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=7.008 mas, bpa=-3.448 degrees ! Estimated noise=389.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200731 Jy ! Component: 100 - total flux cleaned = 0.0324288 Jy ! Component: 150 - total flux cleaned = 0.0416145 Jy ! Component: 200 - total flux cleaned = 0.0487244 Jy ! Total flux subtracted in 200 components = 0.0487244 Jy ! Clean residual min=-0.013609 max=0.019112 Jy/beam ! Clean residual mean=-0.000054 rms=0.004467 Jy/beam ! Combined flux in latest and established models = 0.260878 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 100 components and 0.260879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089999Jy sigma=0.001126 ! Fit after self-cal, rms=0.089606Jy sigma=0.001121 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.92 HN 0.99 KP 1.12 ! LA 0.96 MK 1.05 NL 1.08 OV 1.14 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.07 HN 1.06 KP 1.10 ! LA 0.91 MK 1.08 NL 1.32 OV 1.17 ! PT 0.87 SC 1.13 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.17 HN 1.09 KP 1.01 ! LA 0.72 MK 1.10 NL 1.21 OV 1.04 ! PT 0.87 SC 1.15 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.12 KP 0.98 ! LA 0.70 MK 1.04 NL 1.18 OV 1.04 ! PT 0.89 SC 1.06 ! ! ! Fit before self-cal, rms=0.089606Jy sigma=0.001121 ! Fit after self-cal, rms=0.085193Jy sigma=0.001069 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=7.055 mas, bpa=-2.833 degrees ! Estimated noise=387.972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035719 Jy ! Component: 100 - total flux cleaned = -0.00443675 Jy ! Component: 150 - total flux cleaned = -0.00455565 Jy ! Component: 200 - total flux cleaned = -0.00465733 Jy ! Total flux subtracted in 200 components = -0.00465733 Jy ! Clean residual min=-0.012341 max=0.017957 Jy/beam ! Clean residual mean=-0.000039 rms=0.003987 Jy/beam ! Combined flux in latest and established models = 0.256221 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 116 components and 0.256221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084746Jy sigma=0.001064 ! Fit after self-cal, rms=0.084902Jy sigma=0.001062 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084902Jy sigma=0.001062 ! Fit after self-cal, rms=0.094627Jy sigma=0.000971 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=7.113 mas, bpa=-2.56 degrees ! Estimated noise=396.948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00259176 Jy ! Component: 100 - total flux cleaned = -0.00348963 Jy ! Component: 150 - total flux cleaned = -0.00404144 Jy ! Component: 200 - total flux cleaned = -0.00433551 Jy ! Total flux subtracted in 200 components = -0.00433551 Jy ! Clean residual min=-0.010596 max=0.012146 Jy/beam ! Clean residual mean=0.000023 rms=0.003156 Jy/beam ! Combined flux in latest and established models = 0.251886 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.251886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094075Jy sigma=0.000969 ! Fit after self-cal, rms=0.094351Jy sigma=0.000968 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000509067 Jy ! Component: 100 - total flux cleaned = -0.00059728 Jy ! Component: 150 - total flux cleaned = -0.000765494 Jy ! Component: 200 - total flux cleaned = -0.0010727 Jy ! Total flux subtracted in 200 components = -0.0010727 Jy ! Clean residual min=-0.010660 max=0.011988 Jy/beam ! Clean residual mean=0.000022 rms=0.003149 Jy/beam ! Combined flux in latest and established models = 0.250813 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 132 components and 0.250813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094036Jy sigma=0.000968 ! Fit after self-cal, rms=0.094011Jy sigma=0.000967 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094011Jy sigma=0.000967 ! Fit after self-cal, rms=0.095519Jy sigma=0.000966 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=7.114 mas, bpa=-1.775 degrees ! Estimated noise=400.446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195722 Jy ! Component: 100 - total flux cleaned = -0.00233641 Jy ! Component: 150 - total flux cleaned = -0.00267409 Jy ! Component: 200 - total flux cleaned = -0.00298621 Jy ! Total flux subtracted in 200 components = -0.00298621 Jy ! Clean residual min=-0.010720 max=0.012289 Jy/beam ! Clean residual mean=0.000024 rms=0.003169 Jy/beam ! Combined flux in latest and established models = 0.247827 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 0.247827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095168Jy sigma=0.000966 ! Fit after self-cal, rms=0.095171Jy sigma=0.000966 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391872 Jy ! Component: 100 - total flux cleaned = -0.000538614 Jy ! Component: 150 - total flux cleaned = -0.000806265 Jy ! Component: 200 - total flux cleaned = -0.000990357 Jy ! Total flux subtracted in 200 components = -0.000990357 Jy ! Clean residual min=-0.010749 max=0.012249 Jy/beam ! Clean residual mean=0.000023 rms=0.003171 Jy/beam ! Combined flux in latest and established models = 0.246836 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 0.246836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094971Jy sigma=0.000966 ! Fit after self-cal, rms=0.094963Jy sigma=0.000966 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094963Jy sigma=0.000966 ! Fit after self-cal, rms=0.096715Jy sigma=0.000965 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.751 mas, bmaj=10.53 mas, bpa=-0.7374 degrees ! Estimated noise=462.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141964 Jy ! Component: 100 - total flux cleaned = -0.00217559 Jy ! Component: 150 - total flux cleaned = -0.00254695 Jy ! Component: 200 - total flux cleaned = -0.00275406 Jy ! Total flux subtracted in 200 components = -0.00275406 Jy ! Clean residual min=-0.018679 max=0.019370 Jy/beam ! Clean residual mean=0.000043 rms=0.005749 Jy/beam ! Combined flux in latest and established models = 0.244082 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 149 components and 0.244082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096594Jy sigma=0.000965 ! Fit after self-cal, rms=0.096594Jy sigma=0.000965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.32545e-05 Jy ! Component: 100 - total flux cleaned = -3.94019e-05 Jy ! Component: 150 - total flux cleaned = -8.16148e-05 Jy ! Component: 200 - total flux cleaned = -0.000164386 Jy ! Total flux subtracted in 200 components = -0.000164386 Jy ! Clean residual min=-0.018662 max=0.019432 Jy/beam ! Clean residual mean=0.000044 rms=0.005749 Jy/beam ! Combined flux in latest and established models = 0.243918 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 156 components and 0.243918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096570Jy sigma=0.000965 ! Fit after self-cal, rms=0.096570Jy sigma=0.000965 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=7.135 mas, bpa=-1.359 degrees ! Estimated noise=405.225 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.619 x 7.135 at -1.359 degrees (North through East) ! Clean map min=-0.010767 max=0.081782 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=6.008 mas, bpa=0.1311 degrees ! Estimated noise=625.051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754956 Jy ! Component: 100 - total flux cleaned = 0.121601 Jy ! Component: 150 - total flux cleaned = 0.15384 Jy ! Component: 200 - total flux cleaned = 0.177689 Jy ! Total flux subtracted in 200 components = 0.177689 Jy ! Clean residual min=-0.009793 max=0.013720 Jy/beam ! Clean residual mean=0.000010 rms=0.002808 Jy/beam ! Combined flux in latest and established models = 0.177689 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.177689 Jy ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=7.135 mas, bpa=-1.359 degrees ! Estimated noise=405.225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243937 Jy ! Component: 100 - total flux cleaned = 0.0402907 Jy ! Component: 150 - total flux cleaned = 0.0507201 Jy ! Component: 200 - total flux cleaned = 0.0548537 Jy ! Total flux subtracted in 200 components = 0.0548537 Jy ! Clean residual min=-0.011574 max=0.012696 Jy/beam ! Clean residual mean=0.000019 rms=0.003336 Jy/beam ! Combined flux in latest and established models = 0.232542 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 58 components and 0.232542 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.751 mas, bmaj=10.53 mas, bpa=-0.7374 degrees ! Estimated noise=462.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00779931 Jy ! Component: 100 - total flux cleaned = 0.00838495 Jy ! Component: 150 - total flux cleaned = 0.00906004 Jy ! Component: 200 - total flux cleaned = 0.00935167 Jy ! Total flux subtracted in 200 components = 0.00935167 Jy ! Clean residual min=-0.019009 max=0.019874 Jy/beam ! Clean residual mean=0.000041 rms=0.005815 Jy/beam ! Combined flux in latest and established models = 0.241894 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013306 Jy ! Component: 100 - total flux cleaned = 0.000374058 Jy ! Component: 150 - total flux cleaned = 0.000590888 Jy ! Component: 200 - total flux cleaned = 0.000685644 Jy ! Total flux subtracted in 200 components = 0.000685644 Jy ! Clean residual min=-0.018871 max=0.019735 Jy/beam ! Clean residual mean=0.000043 rms=0.005786 Jy/beam ! Combined flux in latest and established models = 0.24258 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 0.24258 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=7.135 mas, bpa=-1.359 degrees ! Estimated noise=405.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512106 Jy ! Component: 100 - total flux cleaned = 0.000510714 Jy ! Component: 150 - total flux cleaned = 0.000508378 Jy ! Component: 200 - total flux cleaned = 0.000510615 Jy ! Total flux subtracted in 200 components = 0.000510615 Jy ! Clean residual min=-0.010992 max=0.012314 Jy/beam ! Clean residual mean=0.000024 rms=0.003222 Jy/beam ! Combined flux in latest and established models = 0.24309 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.24309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096715Jy sigma=0.000967 ! Fit after self-cal, rms=0.096638Jy sigma=0.000966 wmodel J0037+2407_S_2014_05_31_pus_map.mod ! Writing 86 model components to file: J0037+2407_S_2014_05_31_pus_map.mod wobs J0037+2407_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0037+2407_S_2014_05_31_pus_uvs.fits wwins J0037+2407_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J0037+2407_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496538 Jy ! Component: 100 - total flux cleaned = 0.00657072 Jy ! Component: 150 - total flux cleaned = 0.00902113 Jy ! Component: 200 - total flux cleaned = 0.0106345 Jy ! Component: 250 - total flux cleaned = 0.0123527 Jy ! Component: 300 - total flux cleaned = 0.0135096 Jy ! Component: 350 - total flux cleaned = 0.0146269 Jy ! Component: 400 - total flux cleaned = 0.0155487 Jy ! Component: 450 - total flux cleaned = 0.0161416 Jy ! Component: 500 - total flux cleaned = 0.0165728 Jy ! Component: 550 - total flux cleaned = 0.0171312 Jy ! Component: 600 - total flux cleaned = 0.0174039 Jy ! Component: 650 - total flux cleaned = 0.0178041 Jy ! Component: 700 - total flux cleaned = 0.0179377 Jy ! Component: 750 - total flux cleaned = 0.0188201 Jy ! Component: 800 - total flux cleaned = 0.0190663 Jy ! Component: 850 - total flux cleaned = 0.019787 Jy ! Component: 900 - total flux cleaned = 0.0204875 Jy ! Component: 950 - total flux cleaned = 0.0209406 Jy ! Component: 1000 - total flux cleaned = 0.0213859 Jy ! Component: 1050 - total flux cleaned = 0.0217124 Jy ! Component: 1100 - total flux cleaned = 0.0221403 Jy ! Component: 1150 - total flux cleaned = 0.0226629 Jy ! Component: 1200 - total flux cleaned = 0.0227652 Jy ! Component: 1250 - total flux cleaned = 0.0233697 Jy ! Component: 1300 - total flux cleaned = 0.023568 Jy ! Component: 1350 - total flux cleaned = 0.0241498 Jy ! Component: 1400 - total flux cleaned = 0.0246217 Jy ! Component: 1450 - total flux cleaned = 0.0249941 Jy ! Component: 1500 - total flux cleaned = 0.0257241 Jy ! Component: 1550 - total flux cleaned = 0.0259934 Jy ! Component: 1600 - total flux cleaned = 0.0262577 Jy ! Component: 1650 - total flux cleaned = 0.0266912 Jy ! Component: 1700 - total flux cleaned = 0.0270296 Jy ! Component: 1750 - total flux cleaned = 0.0273632 Jy ! Component: 1800 - total flux cleaned = 0.027773 Jy ! Component: 1850 - total flux cleaned = 0.027774 Jy ! Component: 1900 - total flux cleaned = 0.0281735 Jy ! Component: 1950 - total flux cleaned = 0.0287989 Jy ! Component: 2000 - total flux cleaned = 0.0291064 Jy ! Component: 2050 - total flux cleaned = 0.0297885 Jy ! Component: 2100 - total flux cleaned = 0.0301631 Jy ! Component: 2150 - total flux cleaned = 0.0306783 Jy ! Component: 2200 - total flux cleaned = 0.0310411 Jy ! Component: 2250 - total flux cleaned = 0.0314703 Jy ! Component: 2300 - total flux cleaned = 0.0320331 Jy ! Component: 2350 - total flux cleaned = 0.0326565 Jy ! Component: 2400 - total flux cleaned = 0.0330663 Jy ! Component: 2450 - total flux cleaned = 0.0333359 Jy ! Component: 2500 - total flux cleaned = 0.0338008 Jy ! Component: 2550 - total flux cleaned = 0.0341937 Jy ! Component: 2600 - total flux cleaned = 0.0348396 Jy ! Component: 2650 - total flux cleaned = 0.0349032 Jy ! Component: 2700 - total flux cleaned = 0.035281 Jy ! Component: 2750 - total flux cleaned = 0.035593 Jy ! Component: 2800 - total flux cleaned = 0.0362652 Jy ! Component: 2850 - total flux cleaned = 0.0364463 Jy ! Component: 2900 - total flux cleaned = 0.0371016 Jy ! Component: 2950 - total flux cleaned = 0.0372196 Jy ! Component: 3000 - total flux cleaned = 0.0377421 Jy ! Component: 3050 - total flux cleaned = 0.0380864 Jy ! Component: 3100 - total flux cleaned = 0.0384828 Jy ! Component: 3150 - total flux cleaned = 0.0388187 Jy ! Component: 3200 - total flux cleaned = 0.0391512 Jy ! Component: 3250 - total flux cleaned = 0.0396968 Jy ! Component: 3300 - total flux cleaned = 0.0397512 Jy ! Component: 3350 - total flux cleaned = 0.0400718 Jy ! Component: 3400 - total flux cleaned = 0.0405466 Jy ! Component: 3450 - total flux cleaned = 0.0407032 Jy ! Component: 3500 - total flux cleaned = 0.0410133 Jy ! Component: 3550 - total flux cleaned = 0.0412685 Jy ! Component: 3600 - total flux cleaned = 0.0417728 Jy ! Component: 3650 - total flux cleaned = 0.0418225 Jy ! Component: 3700 - total flux cleaned = 0.0422664 Jy ! Component: 3750 - total flux cleaned = 0.0425576 Jy ! Component: 3800 - total flux cleaned = 0.0427495 Jy ! Component: 3850 - total flux cleaned = 0.042845 Jy ! Component: 3900 - total flux cleaned = 0.0431288 Jy ! Component: 3950 - total flux cleaned = 0.0433621 Jy ! Component: 4000 - total flux cleaned = 0.0437765 Jy ! Component: 4050 - total flux cleaned = 0.0439128 Jy ! Total flux subtracted in 4096 components = 0.0440479 Jy ! Clean residual min=-0.002388 max=0.002322 Jy/beam ! Clean residual mean=0.000006 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.287138 Jy keep ! Adding 524 model components to the UV plane model. ! The established model now contains 610 components and 0.287138 Jy ![Exited script file: muppet] wmap "J0037+2407_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.619 x 7.135 at -1.359 degrees (North through East) ! Clean map min=-0.0075009 max=0.081053 Jy/beam ! Writing clean map to FITS file: J0037+2407_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0810535 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000955011 device "J0037+2407_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0037+2407_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.53475 3.53475 7.06949 14.139 28.278 56.5559 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.619 x 7.135 at -1.359 degrees (North through East) ! Clean map min=-0.0075009 max=0.081053 Jy/beam quit ! Quitting program ! Log file J0037+2407_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:40:45 2016