! Started logfile: J0029-0113_X_2014_01_04_pus_uvs.log on Fri Jan 13 17:20:38 2017 obs J0029-0113_X_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0029-0113_X_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.415235 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0029-0113 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 382 lines of history. ! ! Reading 17400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0029-0113_X_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943395Jy sigma=0.011428 ! Fit after self-cal, rms=0.901860Jy sigma=0.011012 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6324 mas, bmaj=1.69 mas, bpa=2.732 degrees ! Estimated noise=933.707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0742364 Jy ! Component: 100 - total flux cleaned = 0.0972243 Jy ! Total flux subtracted in 100 components = 0.0972243 Jy ! Clean residual min=-0.008603 max=0.010935 Jy/beam ! Clean residual mean=0.000011 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.0972243 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0972243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077381Jy sigma=0.000857 ! Fit after self-cal, rms=0.077348Jy sigma=0.000855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7612 mas, bmaj=1.922 mas, bpa=1.553 degrees ! Estimated noise=446.485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193737 Jy ! Component: 100 - total flux cleaned = 0.0294525 Jy ! Component: 150 - total flux cleaned = 0.0349366 Jy ! Component: 200 - total flux cleaned = 0.037947 Jy ! Total flux subtracted in 200 components = 0.037947 Jy ! Clean residual min=-0.006594 max=0.009412 Jy/beam ! Clean residual mean=0.000034 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.135171 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.135171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073369Jy sigma=0.000782 ! Fit after self-cal, rms=0.073457Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.91 ! MK 1.02 NL 1.05 OV 1.04 PT 0.93 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.94 ! MK 1.09 NL 1.06 OV 1.02 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.98 ! MK 1.07 NL 1.05 OV 1.02 PT 0.88 ! SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.97 ! MK 0.99 NL 1.05 OV 1.04 PT 0.87 ! SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.96 ! MK 1.06 NL 1.06 OV 1.06 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.96 ! MK 1.02 NL 1.07 OV 1.06 PT 0.88 ! SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.96 ! MK 1.03 NL 1.08 OV 1.07 PT 0.89 ! SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.94 ! MK 1.04 NL 1.09 OV 1.11 PT 0.88 ! SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.98 ! MK 0.99 NL 1.08 OV 1.08 PT 0.89 ! SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.99 ! MK 0.97 NL 1.11 OV 1.05 PT 0.89 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.98 ! MK 1.05 NL 1.11 OV 1.03 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.98 ! MK 0.99 NL 1.05 OV 1.05 PT 0.91 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.073457Jy sigma=0.000781 ! Fit after self-cal, rms=0.074405Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7718 mas, bmaj=1.952 mas, bpa=1.645 degrees ! Estimated noise=446.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688705 Jy ! Component: 100 - total flux cleaned = 0.00912585 Jy ! Component: 150 - total flux cleaned = 0.0099098 Jy ! Component: 200 - total flux cleaned = 0.0107015 Jy ! Total flux subtracted in 200 components = 0.0107015 Jy ! Clean residual min=-0.002794 max=0.004018 Jy/beam ! Clean residual mean=0.000007 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.145873 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.145873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073787Jy sigma=0.000761 ! Fit after self-cal, rms=0.073706Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073706Jy sigma=0.000759 ! Fit after self-cal, rms=0.072384Jy sigma=0.000758 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.772 mas, bmaj=1.946 mas, bpa=1.522 degrees ! Estimated noise=442.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279231 Jy ! Component: 100 - total flux cleaned = 0.00397751 Jy ! Component: 150 - total flux cleaned = 0.00411824 Jy ! Component: 200 - total flux cleaned = 0.00411844 Jy ! Total flux subtracted in 200 components = 0.00411844 Jy ! Clean residual min=-0.002181 max=0.002670 Jy/beam ! Clean residual mean=0.000003 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.149991 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.149991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072273Jy sigma=0.000756 ! Fit after self-cal, rms=0.072224Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243268 Jy ! Component: 100 - total flux cleaned = 0.00308136 Jy ! Component: 150 - total flux cleaned = 0.00338573 Jy ! Component: 200 - total flux cleaned = 0.00356696 Jy ! Total flux subtracted in 200 components = 0.00356696 Jy ! Clean residual min=-0.001674 max=0.001650 Jy/beam ! Clean residual mean=0.000000 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.153558 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.153558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072134Jy sigma=0.000754 ! Fit after self-cal, rms=0.072110Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072110Jy sigma=0.000754 ! Fit after self-cal, rms=0.071414Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7719 mas, bmaj=1.945 mas, bpa=1.458 degrees ! Estimated noise=439.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106242 Jy ! Component: 100 - total flux cleaned = 0.00131905 Jy ! Component: 150 - total flux cleaned = 0.00143286 Jy ! Component: 200 - total flux cleaned = 0.00151156 Jy ! Total flux subtracted in 200 components = 0.00151156 Jy ! Clean residual min=-0.001255 max=0.001519 Jy/beam ! Clean residual mean=0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.15507 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.15507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071388Jy sigma=0.000754 ! Fit after self-cal, rms=0.071380Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034912 Jy ! Component: 100 - total flux cleaned = 0.000471201 Jy ! Component: 150 - total flux cleaned = 0.000538052 Jy ! Component: 200 - total flux cleaned = 0.000538745 Jy ! Total flux subtracted in 200 components = 0.000538745 Jy ! Clean residual min=-0.001185 max=0.001357 Jy/beam ! Clean residual mean=0.000001 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.155609 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.155609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071365Jy sigma=0.000754 ! Fit after self-cal, rms=0.071365Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071365Jy sigma=0.000754 ! Fit after self-cal, rms=0.071179Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.089 mas, bmaj=4.616 mas, bpa=-3.756 degrees ! Estimated noise=552.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000699531 Jy ! Component: 100 - total flux cleaned = 0.00100459 Jy ! Component: 150 - total flux cleaned = 0.00109635 Jy ! Component: 200 - total flux cleaned = 0.00112997 Jy ! Total flux subtracted in 200 components = 0.00112997 Jy ! Clean residual min=-0.000932 max=0.000901 Jy/beam ! Clean residual mean=0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.156739 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 0.156739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071178Jy sigma=0.000754 ! Fit after self-cal, rms=0.071178Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270265 Jy ! Component: 100 - total flux cleaned = 0.000302101 Jy ! Component: 150 - total flux cleaned = 0.000330388 Jy ! Component: 200 - total flux cleaned = 0.000322058 Jy ! Total flux subtracted in 200 components = 0.000322058 Jy ! Clean residual min=-0.000829 max=0.000860 Jy/beam ! Clean residual mean=0.000001 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.157061 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.157061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071180Jy sigma=0.000754 ! Fit after self-cal, rms=0.071183Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7717 mas, bmaj=1.945 mas, bpa=1.461 degrees ! Estimated noise=439.745 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7717 x 1.945 at 1.461 degrees (North through East) ! Clean map min=-0.0017955 max=0.10417 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.639 mas, bmaj=1.701 mas, bpa=2.647 degrees ! Estimated noise=931.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0736589 Jy ! Component: 100 - total flux cleaned = 0.0969999 Jy ! Component: 150 - total flux cleaned = 0.108714 Jy ! Component: 200 - total flux cleaned = 0.11653 Jy ! Total flux subtracted in 200 components = 0.11653 Jy ! Clean residual min=-0.006584 max=0.006347 Jy/beam ! Clean residual mean=0.000010 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.11653 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.11653 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7717 mas, bmaj=1.945 mas, bpa=1.461 degrees ! Estimated noise=439.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101977 Jy ! Component: 100 - total flux cleaned = 0.0169275 Jy ! Component: 150 - total flux cleaned = 0.0218977 Jy ! Component: 200 - total flux cleaned = 0.0257671 Jy ! Total flux subtracted in 200 components = 0.0257671 Jy ! Clean residual min=-0.003199 max=0.003378 Jy/beam ! Clean residual mean=0.000014 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.142297 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 33 components and 0.142297 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.089 mas, bmaj=4.616 mas, bpa=-3.756 degrees ! Estimated noise=552.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525395 Jy ! Component: 100 - total flux cleaned = 0.00848969 Jy ! Component: 150 - total flux cleaned = 0.01064 Jy ! Component: 200 - total flux cleaned = 0.0121385 Jy ! Total flux subtracted in 200 components = 0.0121385 Jy ! Clean residual min=-0.002096 max=0.001508 Jy/beam ! Clean residual mean=0.000007 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.154436 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748487 Jy ! Component: 100 - total flux cleaned = 0.00114873 Jy ! Component: 150 - total flux cleaned = 0.0014437 Jy ! Component: 200 - total flux cleaned = 0.00171345 Jy ! Total flux subtracted in 200 components = 0.00171345 Jy ! Clean residual min=-0.001393 max=0.001087 Jy/beam ! Clean residual mean=0.000003 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.156149 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 71 components and 0.156149 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7717 mas, bmaj=1.945 mas, bpa=1.461 degrees ! Estimated noise=439.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278259 Jy ! Component: 100 - total flux cleaned = 3.7771e-05 Jy ! Component: 150 - total flux cleaned = 0.000300075 Jy ! Component: 200 - total flux cleaned = 0.000341326 Jy ! Total flux subtracted in 200 components = 0.000341326 Jy ! Clean residual min=-0.001368 max=0.001816 Jy/beam ! Clean residual mean=0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.15649 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.15649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071218Jy sigma=0.000754 ! Fit after self-cal, rms=0.071159Jy sigma=0.000754 wmodel J0029-0113_X_2014_01_04_pus_map.mod ! Writing 88 model components to file: J0029-0113_X_2014_01_04_pus_map.mod wobs J0029-0113_X_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0029-0113_X_2014_01_04_pus_uvs.fits wwins J0029-0113_X_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0029-0113_X_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705304 Jy ! Component: 100 - total flux cleaned = 0.00117369 Jy ! Component: 150 - total flux cleaned = 0.00140453 Jy ! Component: 200 - total flux cleaned = 0.00149961 Jy ! Component: 250 - total flux cleaned = 0.00160644 Jy ! Component: 300 - total flux cleaned = 0.00170722 Jy ! Component: 350 - total flux cleaned = 0.00177174 Jy ! Component: 400 - total flux cleaned = 0.00178694 Jy ! Component: 450 - total flux cleaned = 0.00178711 Jy ! Component: 500 - total flux cleaned = 0.00171674 Jy ! Component: 550 - total flux cleaned = 0.00170304 Jy ! Component: 600 - total flux cleaned = 0.00165001 Jy ! Component: 650 - total flux cleaned = 0.00158599 Jy ! Component: 700 - total flux cleaned = 0.00156145 Jy ! Component: 750 - total flux cleaned = 0.00151336 Jy ! Component: 800 - total flux cleaned = 0.00144268 Jy ! Component: 850 - total flux cleaned = 0.00136212 Jy ! Component: 900 - total flux cleaned = 0.00130568 Jy ! Component: 950 - total flux cleaned = 0.00122829 Jy ! Component: 1000 - total flux cleaned = 0.00117437 Jy ! Component: 1050 - total flux cleaned = 0.00118508 Jy ! Component: 1100 - total flux cleaned = 0.00116409 Jy ! Component: 1150 - total flux cleaned = 0.00116397 Jy ! Component: 1200 - total flux cleaned = 0.00115379 Jy ! Component: 1250 - total flux cleaned = 0.00113377 Jy ! Component: 1300 - total flux cleaned = 0.0011238 Jy ! Component: 1350 - total flux cleaned = 0.00109473 Jy ! Component: 1400 - total flux cleaned = 0.00106619 Jy ! Component: 1450 - total flux cleaned = 0.00107565 Jy ! Component: 1500 - total flux cleaned = 0.00107532 Jy ! Component: 1550 - total flux cleaned = 0.00106613 Jy ! Component: 1600 - total flux cleaned = 0.0010391 Jy ! Component: 1650 - total flux cleaned = 0.00103891 Jy ! Component: 1700 - total flux cleaned = 0.00098606 Jy ! Component: 1750 - total flux cleaned = 0.000951327 Jy ! Component: 1800 - total flux cleaned = 0.000925471 Jy ! Component: 1850 - total flux cleaned = 0.000899742 Jy ! Component: 1900 - total flux cleaned = 0.000916758 Jy ! Component: 1950 - total flux cleaned = 0.000942259 Jy ! Component: 2000 - total flux cleaned = 0.000950678 Jy ! Total flux subtracted in 2048 components = 0.00095065 Jy ! Clean residual min=-0.000598 max=0.000468 Jy/beam ! Clean residual mean=-0.000001 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.157441 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 210 components and 0.157441 Jy ![Exited script file: muppet] wmap "J0029-0113_X_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7717 x 1.945 at 1.461 degrees (North through East) ! Clean map min=-0.0013396 max=0.10401 Jy/beam ! Writing clean map to FITS file: J0029-0113_X_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104009 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000144508 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.416812 0.416812 0.833623 1.66725 3.33449 6.66899 13.338 26.6759 53.3519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7717 x 1.945 at 1.461 degrees (North through East) ! Clean map min=-0.0013396 max=0.10401 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0029-0113_X_2014_01_04_pus_uvs.log closed on Fri Jan 13 17:20:39 2017