! Started logfile: J0026+3508_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:19 2017 obs J0026+3508_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0026+3508_S_2014_01_04_pus_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.431778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0026+3508 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0026+3508_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970334Jy sigma=0.015208 ! Fit after self-cal, rms=0.940836Jy sigma=0.014666 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=4.705 mas, bpa=-12.31 degrees ! Estimated noise=1032.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416332 Jy ! Component: 100 - total flux cleaned = 0.0574594 Jy ! Total flux subtracted in 100 components = 0.0574594 Jy ! Clean residual min=-0.009920 max=0.015536 Jy/beam ! Clean residual mean=0.000033 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 0.0574594 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0574594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088734Jy sigma=0.001208 ! Fit after self-cal, rms=0.088443Jy sigma=0.001200 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=5.568 mas, bpa=-6.411 degrees ! Estimated noise=548.808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205177 Jy ! Component: 100 - total flux cleaned = 0.0332568 Jy ! Component: 150 - total flux cleaned = 0.0417463 Jy ! Component: 200 - total flux cleaned = 0.0474712 Jy ! Total flux subtracted in 200 components = 0.0474712 Jy ! Clean residual min=-0.012691 max=0.023295 Jy/beam ! Clean residual mean=0.000050 rms=0.004794 Jy/beam ! Combined flux in latest and established models = 0.104931 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.104931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082790Jy sigma=0.001119 ! Fit after self-cal, rms=0.081253Jy sigma=0.001110 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 1.00* KP 1.00* LA 0.86 ! MK 1.50 NL 1.02 OV 1.05 PT 0.79 ! SC 1.19 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 1.00* KP 1.00* LA 0.78 ! MK 1.38 NL 1.15 OV 1.13 PT 0.78 ! SC 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.00* KP 1.00* LA 0.64 ! MK 1.31 NL 1.05 OV 1.04 PT 0.76 ! SC 1.24 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 1.00* KP 1.00* LA 0.67 ! MK 1.28 NL 1.20 OV 1.12 PT 0.83 ! SC 1.11 ! ! ! Fit before self-cal, rms=0.081253Jy sigma=0.001110 ! Fit after self-cal, rms=0.091147Jy sigma=0.001058 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=6.149 mas, bpa=-3.549 degrees ! Estimated noise=585.873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000455426 Jy ! Component: 100 - total flux cleaned = -0.000126435 Jy ! Component: 150 - total flux cleaned = 0.000157409 Jy ! Component: 200 - total flux cleaned = 0.000275729 Jy ! Total flux subtracted in 200 components = 0.000275729 Jy ! Clean residual min=-0.010543 max=0.016938 Jy/beam ! Clean residual mean=0.000023 rms=0.004077 Jy/beam ! Combined flux in latest and established models = 0.105206 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.105206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090853Jy sigma=0.001048 ! Fit after self-cal, rms=0.090770Jy sigma=0.001039 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090770Jy sigma=0.001039 ! Fit after self-cal, rms=0.116131Jy sigma=0.001020 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.198 mas, bmaj=6.049 mas, bpa=7.893 degrees ! Estimated noise=590.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.87475e-05 Jy ! Component: 100 - total flux cleaned = 0.000357266 Jy ! Component: 150 - total flux cleaned = 0.000714379 Jy ! Component: 200 - total flux cleaned = 0.00109204 Jy ! Total flux subtracted in 200 components = 0.00109204 Jy ! Clean residual min=-0.009234 max=0.014652 Jy/beam ! Clean residual mean=0.000004 rms=0.003547 Jy/beam ! Combined flux in latest and established models = 0.106298 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.106298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116074Jy sigma=0.001014 ! Fit after self-cal, rms=0.116482Jy sigma=0.001011 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185924 Jy ! Component: 100 - total flux cleaned = 0.000577045 Jy ! Component: 150 - total flux cleaned = 0.00090506 Jy ! Component: 200 - total flux cleaned = 0.00111688 Jy ! Total flux subtracted in 200 components = 0.00111688 Jy ! Clean residual min=-0.009285 max=0.014393 Jy/beam ! Clean residual mean=0.000004 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 0.107415 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.107415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116408Jy sigma=0.001006 ! Fit after self-cal, rms=0.116346Jy sigma=0.001006 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116346Jy sigma=0.001006 ! Fit after self-cal, rms=0.116664Jy sigma=0.001003 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.315 mas, bmaj=6.146 mas, bpa=9.904 degrees ! Estimated noise=576.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000450314 Jy ! Component: 100 - total flux cleaned = 0.00011022 Jy ! Component: 150 - total flux cleaned = 0.000589335 Jy ! Component: 200 - total flux cleaned = 0.000911916 Jy ! Total flux subtracted in 200 components = 0.000911916 Jy ! Clean residual min=-0.008647 max=0.013789 Jy/beam ! Clean residual mean=0.000002 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 0.108327 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.108327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116550Jy sigma=0.000995 ! Fit after self-cal, rms=0.116477Jy sigma=0.000995 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216325 Jy ! Component: 100 - total flux cleaned = 0.000595467 Jy ! Component: 150 - total flux cleaned = 0.0007621 Jy ! Component: 200 - total flux cleaned = 0.000911262 Jy ! Total flux subtracted in 200 components = 0.000911262 Jy ! Clean residual min=-0.008967 max=0.013365 Jy/beam ! Clean residual mean=0.000002 rms=0.003208 Jy/beam ! Combined flux in latest and established models = 0.109238 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.109238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116339Jy sigma=0.000991 ! Fit after self-cal, rms=0.116145Jy sigma=0.000990 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116145Jy sigma=0.000990 ! Fit after self-cal, rms=0.110018Jy sigma=0.000987 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.095 mas, bmaj=10.27 mas, bpa=55.35 degrees ! Estimated noise=537.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.90708e-05 Jy ! Component: 100 - total flux cleaned = 0.000312289 Jy ! Component: 150 - total flux cleaned = 0.000525774 Jy ! Component: 200 - total flux cleaned = 0.000714655 Jy ! Total flux subtracted in 200 components = 0.000714655 Jy ! Clean residual min=-0.009553 max=0.015883 Jy/beam ! Clean residual mean=0.000003 rms=0.003885 Jy/beam ! Combined flux in latest and established models = 0.109953 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.109953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109947Jy sigma=0.000980 ! Fit after self-cal, rms=0.109753Jy sigma=0.000979 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128034 Jy ! Component: 100 - total flux cleaned = 5.88361e-05 Jy ! Component: 150 - total flux cleaned = 0.000228846 Jy ! Component: 200 - total flux cleaned = 0.000384593 Jy ! Total flux subtracted in 200 components = 0.000384593 Jy ! Clean residual min=-0.009942 max=0.015507 Jy/beam ! Clean residual mean=0.000003 rms=0.003844 Jy/beam ! Combined flux in latest and established models = 0.110338 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.110338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109763Jy sigma=0.000976 ! Fit after self-cal, rms=0.109552Jy sigma=0.000975 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.457 mas, bmaj=6.242 mas, bpa=9.127 degrees ! Estimated noise=550.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.457 x 6.242 at 9.127 degrees (North through East) ! Clean map min=-0.0077826 max=0.046399 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=5.035 mas, bpa=3.284 degrees ! Estimated noise=1161.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463121 Jy ! Component: 100 - total flux cleaned = 0.0706118 Jy ! Component: 150 - total flux cleaned = 0.0850861 Jy ! Component: 200 - total flux cleaned = 0.0942362 Jy ! Total flux subtracted in 200 components = 0.0942362 Jy ! Clean residual min=-0.009417 max=0.009726 Jy/beam ! Clean residual mean=0.000010 rms=0.002642 Jy/beam ! Combined flux in latest and established models = 0.0942362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0942362 Jy ! Inverting map and beam ! Estimated beam: bmin=4.457 mas, bmaj=6.242 mas, bpa=9.127 degrees ! Estimated noise=550.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783297 Jy ! Component: 100 - total flux cleaned = 0.0120226 Jy ! Component: 150 - total flux cleaned = 0.0131252 Jy ! Component: 200 - total flux cleaned = 0.0135657 Jy ! Total flux subtracted in 200 components = 0.0135657 Jy ! Clean residual min=-0.008301 max=0.011640 Jy/beam ! Clean residual mean=0.000005 rms=0.002852 Jy/beam ! Combined flux in latest and established models = 0.107802 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.107802 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.095 mas, bmaj=10.27 mas, bpa=55.35 degrees ! Estimated noise=537.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273893 Jy ! Component: 100 - total flux cleaned = 0.003123 Jy ! Component: 150 - total flux cleaned = 0.00337952 Jy ! Component: 200 - total flux cleaned = 0.00345558 Jy ! Total flux subtracted in 200 components = 0.00345558 Jy ! Clean residual min=-0.010092 max=0.014903 Jy/beam ! Clean residual mean=0.000002 rms=0.003755 Jy/beam ! Combined flux in latest and established models = 0.111258 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.02372e-05 Jy ! Component: 100 - total flux cleaned = 0.000135312 Jy ! Component: 150 - total flux cleaned = 0.000134779 Jy ! Component: 200 - total flux cleaned = 0.000193484 Jy ! Total flux subtracted in 200 components = 0.000193484 Jy ! Clean residual min=-0.010106 max=0.014676 Jy/beam ! Clean residual mean=0.000002 rms=0.003700 Jy/beam ! Combined flux in latest and established models = 0.111451 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.111451 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.457 mas, bmaj=6.242 mas, bpa=9.127 degrees ! Estimated noise=550.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016384 Jy ! Component: 100 - total flux cleaned = -0.00174037 Jy ! Component: 150 - total flux cleaned = -0.0017407 Jy ! Component: 200 - total flux cleaned = -0.00174268 Jy ! Total flux subtracted in 200 components = -0.00174268 Jy ! Clean residual min=-0.007943 max=0.011494 Jy/beam ! Clean residual mean=0.000003 rms=0.002737 Jy/beam ! Combined flux in latest and established models = 0.109708 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.109708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109297Jy sigma=0.000970 ! Fit after self-cal, rms=0.108860Jy sigma=0.000967 wmodel J0026+3508_S_2014_01_04_pus_map.mod ! Writing 35 model components to file: J0026+3508_S_2014_01_04_pus_map.mod wobs J0026+3508_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0026+3508_S_2014_01_04_pus_uvs.fits wwins J0026+3508_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0026+3508_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516713 Jy ! Component: 100 - total flux cleaned = 0.00944235 Jy ! Component: 150 - total flux cleaned = 0.0120697 Jy ! Component: 200 - total flux cleaned = 0.0134767 Jy ! Component: 250 - total flux cleaned = 0.0144001 Jy ! Component: 300 - total flux cleaned = 0.0151331 Jy ! Component: 350 - total flux cleaned = 0.0157091 Jy ! Component: 400 - total flux cleaned = 0.0165923 Jy ! Component: 450 - total flux cleaned = 0.0173298 Jy ! Component: 500 - total flux cleaned = 0.0179392 Jy ! Component: 550 - total flux cleaned = 0.0183705 Jy ! Component: 600 - total flux cleaned = 0.0185706 Jy ! Component: 650 - total flux cleaned = 0.0185716 Jy ! Component: 700 - total flux cleaned = 0.0188118 Jy ! Component: 750 - total flux cleaned = 0.0189827 Jy ! Component: 800 - total flux cleaned = 0.019198 Jy ! Component: 850 - total flux cleaned = 0.0193515 Jy ! Component: 900 - total flux cleaned = 0.0195946 Jy ! Component: 950 - total flux cleaned = 0.0197788 Jy ! Component: 1000 - total flux cleaned = 0.0196917 Jy ! Component: 1050 - total flux cleaned = 0.0196925 Jy ! Component: 1100 - total flux cleaned = 0.0196923 Jy ! Component: 1150 - total flux cleaned = 0.0196137 Jy ! Component: 1200 - total flux cleaned = 0.0194611 Jy ! Component: 1250 - total flux cleaned = 0.0192771 Jy ! Component: 1300 - total flux cleaned = 0.0190981 Jy ! Component: 1350 - total flux cleaned = 0.0189936 Jy ! Component: 1400 - total flux cleaned = 0.0187914 Jy ! Component: 1450 - total flux cleaned = 0.0187592 Jy ! Component: 1500 - total flux cleaned = 0.0186617 Jy ! Component: 1550 - total flux cleaned = 0.0185354 Jy ! Component: 1600 - total flux cleaned = 0.0185045 Jy ! Component: 1650 - total flux cleaned = 0.0183828 Jy ! Component: 1700 - total flux cleaned = 0.0182638 Jy ! Component: 1750 - total flux cleaned = 0.018205 Jy ! Component: 1800 - total flux cleaned = 0.0180604 Jy ! Component: 1850 - total flux cleaned = 0.0179751 Jy ! Component: 1900 - total flux cleaned = 0.017835 Jy ! Component: 1950 - total flux cleaned = 0.017807 Jy ! Component: 2000 - total flux cleaned = 0.0176699 Jy ! Component: 2050 - total flux cleaned = 0.017616 Jy ! Component: 2100 - total flux cleaned = 0.0176427 Jy ! Component: 2150 - total flux cleaned = 0.0175893 Jy ! Component: 2200 - total flux cleaned = 0.0176424 Jy ! Component: 2250 - total flux cleaned = 0.0176164 Jy ! Component: 2300 - total flux cleaned = 0.0176687 Jy ! Component: 2350 - total flux cleaned = 0.0176948 Jy ! Component: 2400 - total flux cleaned = 0.0177726 Jy ! Component: 2450 - total flux cleaned = 0.0178243 Jy ! Component: 2500 - total flux cleaned = 0.0178757 Jy ! Component: 2550 - total flux cleaned = 0.0179014 Jy ! Component: 2600 - total flux cleaned = 0.0179268 Jy ! Component: 2650 - total flux cleaned = 0.0179523 Jy ! Component: 2700 - total flux cleaned = 0.0179269 Jy ! Component: 2750 - total flux cleaned = 0.0179773 Jy ! Component: 2800 - total flux cleaned = 0.0179521 Jy ! Component: 2850 - total flux cleaned = 0.0180023 Jy ! Component: 2900 - total flux cleaned = 0.0180025 Jy ! Component: 2950 - total flux cleaned = 0.0179523 Jy ! Component: 3000 - total flux cleaned = 0.017852 Jy ! Component: 3050 - total flux cleaned = 0.0178018 Jy ! Component: 3100 - total flux cleaned = 0.0177767 Jy ! Component: 3150 - total flux cleaned = 0.017676 Jy ! Component: 3200 - total flux cleaned = 0.0176004 Jy ! Component: 3250 - total flux cleaned = 0.0175501 Jy ! Component: 3300 - total flux cleaned = 0.0174995 Jy ! Component: 3350 - total flux cleaned = 0.0174741 Jy ! Component: 3400 - total flux cleaned = 0.0174489 Jy ! Component: 3450 - total flux cleaned = 0.0174742 Jy ! Component: 3500 - total flux cleaned = 0.0174743 Jy ! Component: 3550 - total flux cleaned = 0.0174234 Jy ! Component: 3600 - total flux cleaned = 0.0174488 Jy ! Component: 3650 - total flux cleaned = 0.0173975 Jy ! Component: 3700 - total flux cleaned = 0.0173719 Jy ! Component: 3750 - total flux cleaned = 0.0173459 Jy ! Component: 3800 - total flux cleaned = 0.0173977 Jy ! Component: 3850 - total flux cleaned = 0.0173978 Jy ! Component: 3900 - total flux cleaned = 0.0174498 Jy ! Component: 3950 - total flux cleaned = 0.0175021 Jy ! Component: 4000 - total flux cleaned = 0.0175283 Jy ! Component: 4050 - total flux cleaned = 0.0175813 Jy ! Total flux subtracted in 4096 components = 0.0175812 Jy ! Clean residual min=-0.001840 max=0.001478 Jy/beam ! Clean residual mean=-0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.12729 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 302 components and 0.127289 Jy ![Exited script file: muppet] wmap "J0026+3508_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.457 x 6.242 at 9.127 degrees (North through East) ! Clean map min=-0.0028796 max=0.049846 Jy/beam ! Writing clean map to FITS file: J0026+3508_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0498464 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000394554 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.37462 2.37462 4.74924 9.49848 18.997 37.9939 75.9879 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.457 x 6.242 at 9.127 degrees (North through East) ! Clean map min=-0.0028796 max=0.049846 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0026+3508_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:23 2017