! Started logfile: J0025+3919_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:15 2017 obs J0025+3919_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0025+3919_S_2014_01_04_pus_uva.fits ! AN table 1: 74 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0025+3919 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0025+3919_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.630081Jy sigma=0.010322 ! Fit after self-cal, rms=0.612011Jy sigma=0.010016 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=4.659 mas, bpa=-11.83 degrees ! Estimated noise=900.222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.285674 Jy ! Component: 100 - total flux cleaned = 0.356699 Jy ! Total flux subtracted in 100 components = 0.356699 Jy ! Clean residual min=-0.023800 max=0.034101 Jy/beam ! Clean residual mean=0.000084 rms=0.005956 Jy/beam ! Combined flux in latest and established models = 0.356699 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.356699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122863Jy sigma=0.001621 ! Fit after self-cal, rms=0.122740Jy sigma=0.001620 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=5.512 mas, bpa=-9.467 degrees ! Estimated noise=700.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494808 Jy ! Component: 100 - total flux cleaned = 0.0774864 Jy ! Component: 150 - total flux cleaned = 0.0962935 Jy ! Component: 200 - total flux cleaned = 0.109079 Jy ! Total flux subtracted in 200 components = 0.109079 Jy ! Clean residual min=-0.018683 max=0.035959 Jy/beam ! Clean residual mean=0.000087 rms=0.006141 Jy/beam ! Combined flux in latest and established models = 0.465777 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.465777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093318Jy sigma=0.001311 ! Fit after self-cal, rms=0.093060Jy sigma=0.001308 ! Inverting map ! Added new window around map position (2.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312728 Jy ! Component: 100 - total flux cleaned = 0.0461087 Jy ! Component: 150 - total flux cleaned = 0.0558255 Jy ! Component: 200 - total flux cleaned = 0.0633921 Jy ! Total flux subtracted in 200 components = 0.0633921 Jy ! Clean residual min=-0.011960 max=0.011912 Jy/beam ! Clean residual mean=0.000037 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.529169 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 61 components and 0.529169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081746Jy sigma=0.001113 ! Fit after self-cal, rms=0.081326Jy sigma=0.001106 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.02 ! MK 0.98 NL 0.96 OV 0.97 PT 1.00 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.00 ! MK 0.97 NL 1.02 OV 1.01 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.82 ! MK 1.00 NL 1.14 OV 0.94 PT 0.96 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.91 ! MK 1.00 NL 1.10 OV 1.00 PT 1.00 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.081326Jy sigma=0.001106 ! Fit after self-cal, rms=0.067697Jy sigma=0.000926 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.522 mas, bpa=-8.709 degrees ! Estimated noise=696.721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223993 Jy ! Component: 100 - total flux cleaned = -0.00215981 Jy ! Component: 150 - total flux cleaned = -0.00189834 Jy ! Component: 200 - total flux cleaned = -0.00189871 Jy ! Total flux subtracted in 200 components = -0.00189871 Jy ! Clean residual min=-0.004615 max=0.003901 Jy/beam ! Clean residual mean=0.000003 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.527271 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.527271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067361Jy sigma=0.000922 ! Fit after self-cal, rms=0.067175Jy sigma=0.000922 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067175Jy sigma=0.000922 ! Fit after self-cal, rms=0.066876Jy sigma=0.000919 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=5.528 mas, bpa=-8.872 degrees ! Estimated noise=696.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198051 Jy ! Component: 100 - total flux cleaned = -0.00235829 Jy ! Component: 150 - total flux cleaned = -0.00249373 Jy ! Component: 200 - total flux cleaned = -0.00261626 Jy ! Total flux subtracted in 200 components = -0.00261626 Jy ! Clean residual min=-0.004241 max=0.003589 Jy/beam ! Clean residual mean=-0.000001 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.524654 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.524654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066688Jy sigma=0.000917 ! Fit after self-cal, rms=0.066694Jy sigma=0.000917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000377992 Jy ! Component: 100 - total flux cleaned = -0.000323971 Jy ! Component: 150 - total flux cleaned = -0.000372247 Jy ! Component: 200 - total flux cleaned = -0.000457324 Jy ! Total flux subtracted in 200 components = -0.000457324 Jy ! Clean residual min=-0.003697 max=0.003512 Jy/beam ! Clean residual mean=-0.000000 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.524197 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.524197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066610Jy sigma=0.000916 ! Fit after self-cal, rms=0.066620Jy sigma=0.000916 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066620Jy sigma=0.000916 ! Fit after self-cal, rms=0.066404Jy sigma=0.000915 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.715 mas, bmaj=5.53 mas, bpa=-9.012 degrees ! Estimated noise=695.603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000954627 Jy ! Component: 100 - total flux cleaned = -0.00132565 Jy ! Component: 150 - total flux cleaned = -0.00144723 Jy ! Component: 200 - total flux cleaned = -0.00152112 Jy ! Total flux subtracted in 200 components = -0.00152112 Jy ! Clean residual min=-0.003482 max=0.003466 Jy/beam ! Clean residual mean=-0.000002 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.522676 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.522676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066333Jy sigma=0.000914 ! Fit after self-cal, rms=0.066333Jy sigma=0.000914 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317059 Jy ! Component: 100 - total flux cleaned = -0.000244202 Jy ! Component: 150 - total flux cleaned = -0.000339991 Jy ! Component: 200 - total flux cleaned = -0.000458841 Jy ! Total flux subtracted in 200 components = -0.000458841 Jy ! Clean residual min=-0.003151 max=0.003376 Jy/beam ! Clean residual mean=-0.000002 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.522217 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.522217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066292Jy sigma=0.000914 ! Fit after self-cal, rms=0.066299Jy sigma=0.000914 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066299Jy sigma=0.000914 ! Fit after self-cal, rms=0.066166Jy sigma=0.000914 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.545 mas, bmaj=9.352 mas, bpa=7.32 degrees ! Estimated noise=799.013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000974336 Jy ! Component: 100 - total flux cleaned = -0.000937753 Jy ! Component: 150 - total flux cleaned = -0.00102912 Jy ! Component: 200 - total flux cleaned = -0.00105564 Jy ! Total flux subtracted in 200 components = -0.00105564 Jy ! Clean residual min=-0.003730 max=0.003718 Jy/beam ! Clean residual mean=-0.000005 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.521162 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.521162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066144Jy sigma=0.000913 ! Fit after self-cal, rms=0.066141Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000482933 Jy ! Component: 100 - total flux cleaned = -0.000456067 Jy ! Component: 150 - total flux cleaned = -0.000455605 Jy ! Component: 200 - total flux cleaned = -0.000434727 Jy ! Total flux subtracted in 200 components = -0.000434727 Jy ! Clean residual min=-0.003358 max=0.003528 Jy/beam ! Clean residual mean=-0.000004 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.520727 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 113 components and 0.520727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066139Jy sigma=0.000913 ! Fit after self-cal, rms=0.066143Jy sigma=0.000913 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.711 mas, bmaj=5.531 mas, bpa=-9.119 degrees ! Estimated noise=695.344 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.711 x 5.531 at -9.119 degrees (North through East) ! Clean map min=-0.0029653 max=0.37573 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=4.66 mas, bpa=-10.69 degrees ! Estimated noise=896.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284386 Jy ! Component: 100 - total flux cleaned = 0.355966 Jy ! Component: 150 - total flux cleaned = 0.3915 Jy ! Component: 200 - total flux cleaned = 0.413726 Jy ! Total flux subtracted in 200 components = 0.413726 Jy ! Clean residual min=-0.009682 max=0.012481 Jy/beam ! Clean residual mean=0.000044 rms=0.003018 Jy/beam ! Combined flux in latest and established models = 0.413726 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.413726 Jy ! Inverting map and beam ! Estimated beam: bmin=3.711 mas, bmaj=5.531 mas, bpa=-9.119 degrees ! Estimated noise=695.344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272786 Jy ! Component: 100 - total flux cleaned = 0.0456451 Jy ! Component: 150 - total flux cleaned = 0.0590818 Jy ! Component: 200 - total flux cleaned = 0.0691803 Jy ! Total flux subtracted in 200 components = 0.0691803 Jy ! Clean residual min=-0.005748 max=0.007225 Jy/beam ! Clean residual mean=0.000035 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.482906 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 88 components and 0.482906 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.545 mas, bmaj=9.352 mas, bpa=7.32 degrees ! Estimated noise=799.013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125078 Jy ! Component: 100 - total flux cleaned = 0.0202004 Jy ! Component: 150 - total flux cleaned = 0.0252673 Jy ! Component: 200 - total flux cleaned = 0.0287351 Jy ! Total flux subtracted in 200 components = 0.0287351 Jy ! Clean residual min=-0.003874 max=0.003763 Jy/beam ! Clean residual mean=0.000011 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.511642 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024322 Jy ! Component: 100 - total flux cleaned = 0.00415358 Jy ! Component: 150 - total flux cleaned = 0.00537756 Jy ! Component: 200 - total flux cleaned = 0.00625023 Jy ! Total flux subtracted in 200 components = 0.00625023 Jy ! Clean residual min=-0.002940 max=0.003155 Jy/beam ! Clean residual mean=0.000000 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.517892 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 164 components and 0.517892 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.711 mas, bmaj=5.531 mas, bpa=-9.119 degrees ! Estimated noise=695.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.14358e-05 Jy ! Component: 100 - total flux cleaned = 0.000140671 Jy ! Component: 150 - total flux cleaned = 0.000415506 Jy ! Component: 200 - total flux cleaned = 0.000600339 Jy ! Total flux subtracted in 200 components = 0.000600339 Jy ! Clean residual min=-0.003487 max=0.003815 Jy/beam ! Clean residual mean=0.000000 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.518492 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 182 components and 0.518492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066240Jy sigma=0.000914 ! Fit after self-cal, rms=0.066215Jy sigma=0.000914 wmodel J0025+3919_S_2014_01_04_pus_map.mod ! Writing 182 model components to file: J0025+3919_S_2014_01_04_pus_map.mod wobs J0025+3919_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0025+3919_S_2014_01_04_pus_uvs.fits wwins J0025+3919_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0025+3919_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621023 Jy ! Component: 100 - total flux cleaned = 0.000570399 Jy ! Component: 150 - total flux cleaned = 0.000661771 Jy ! Component: 200 - total flux cleaned = 0.000748924 Jy ! Component: 250 - total flux cleaned = 0.000790753 Jy ! Component: 300 - total flux cleaned = 0.000830107 Jy ! Component: 350 - total flux cleaned = 0.000867982 Jy ! Component: 400 - total flux cleaned = 0.000972214 Jy ! Component: 450 - total flux cleaned = 0.000972501 Jy ! Component: 500 - total flux cleaned = 0.00100381 Jy ! Component: 550 - total flux cleaned = 0.000911719 Jy ! Component: 600 - total flux cleaned = 0.000911158 Jy ! Component: 650 - total flux cleaned = 0.000910481 Jy ! Component: 700 - total flux cleaned = 0.000827666 Jy ! Component: 750 - total flux cleaned = 0.000774732 Jy ! Component: 800 - total flux cleaned = 0.000723617 Jy ! Component: 850 - total flux cleaned = 0.000649235 Jy ! Component: 900 - total flux cleaned = 0.000577073 Jy ! Component: 950 - total flux cleaned = 0.000483873 Jy ! Component: 1000 - total flux cleaned = 0.000438711 Jy ! Component: 1050 - total flux cleaned = 0.000305249 Jy ! Component: 1100 - total flux cleaned = 0.000174602 Jy ! Component: 1150 - total flux cleaned = 8.92737e-05 Jy ! Component: 1200 - total flux cleaned = -3.49105e-05 Jy ! Component: 1250 - total flux cleaned = -9.58512e-05 Jy ! Component: 1300 - total flux cleaned = -0.000195036 Jy ! Component: 1350 - total flux cleaned = -0.000253406 Jy ! Component: 1400 - total flux cleaned = -0.000310586 Jy ! Component: 1450 - total flux cleaned = -0.000311023 Jy ! Component: 1500 - total flux cleaned = -0.000384308 Jy ! Component: 1550 - total flux cleaned = -0.000384064 Jy ! Component: 1600 - total flux cleaned = -0.000401531 Jy ! Component: 1650 - total flux cleaned = -0.000401734 Jy ! Component: 1700 - total flux cleaned = -0.000367889 Jy ! Component: 1750 - total flux cleaned = -0.000434338 Jy ! Component: 1800 - total flux cleaned = -0.000467195 Jy ! Component: 1850 - total flux cleaned = -0.000483499 Jy ! Component: 1900 - total flux cleaned = -0.000563004 Jy ! Component: 1950 - total flux cleaned = -0.00060967 Jy ! Component: 2000 - total flux cleaned = -0.000609569 Jy ! Component: 2050 - total flux cleaned = -0.000685374 Jy ! Component: 2100 - total flux cleaned = -0.000745221 Jy ! Component: 2150 - total flux cleaned = -0.000760084 Jy ! Component: 2200 - total flux cleaned = -0.000789568 Jy ! Component: 2250 - total flux cleaned = -0.000905118 Jy ! Component: 2300 - total flux cleaned = -0.000947923 Jy ! Component: 2350 - total flux cleaned = -0.00103266 Jy ! Component: 2400 - total flux cleaned = -0.00106056 Jy ! Component: 2450 - total flux cleaned = -0.00114326 Jy ! Component: 2500 - total flux cleaned = -0.00122535 Jy ! Component: 2550 - total flux cleaned = -0.00130659 Jy ! Component: 2600 - total flux cleaned = -0.00138691 Jy ! Component: 2650 - total flux cleaned = -0.00147961 Jy ! Component: 2700 - total flux cleaned = -0.0015715 Jy ! Component: 2750 - total flux cleaned = -0.00161075 Jy ! Component: 2800 - total flux cleaned = -0.00168811 Jy ! Component: 2850 - total flux cleaned = -0.00168812 Jy ! Component: 2900 - total flux cleaned = -0.00177662 Jy ! Component: 2950 - total flux cleaned = -0.00180172 Jy ! Component: 3000 - total flux cleaned = -0.0018392 Jy ! Component: 3050 - total flux cleaned = -0.00190122 Jy ! Component: 3100 - total flux cleaned = -0.00192582 Jy ! Component: 3150 - total flux cleaned = -0.00196248 Jy ! Component: 3200 - total flux cleaned = -0.00202326 Jy ! Component: 3250 - total flux cleaned = -0.00210785 Jy ! Component: 3300 - total flux cleaned = -0.00215592 Jy ! Component: 3350 - total flux cleaned = -0.00219184 Jy ! Component: 3400 - total flux cleaned = -0.00226321 Jy ! Component: 3450 - total flux cleaned = -0.00228692 Jy ! Component: 3500 - total flux cleaned = -0.00232235 Jy ! Component: 3550 - total flux cleaned = -0.00236927 Jy ! Component: 3600 - total flux cleaned = -0.0024276 Jy ! Component: 3650 - total flux cleaned = -0.0024392 Jy ! Component: 3700 - total flux cleaned = -0.00248559 Jy ! Component: 3750 - total flux cleaned = -0.00249719 Jy ! Component: 3800 - total flux cleaned = -0.00252025 Jy ! Component: 3850 - total flux cleaned = -0.00255481 Jy ! Component: 3900 - total flux cleaned = -0.00256628 Jy ! Component: 3950 - total flux cleaned = -0.00258917 Jy ! Component: 4000 - total flux cleaned = -0.00262351 Jy ! Component: 4050 - total flux cleaned = -0.00261207 Jy ! Total flux subtracted in 4096 components = -0.00262346 Jy ! Clean residual min=-0.000716 max=0.000705 Jy/beam ! Clean residual mean=-0.000007 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.515869 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 409 components and 0.515869 Jy ![Exited script file: muppet] wmap "J0025+3919_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.711 x 5.531 at -9.119 degrees (North through East) ! Clean map min=-0.0016142 max=0.38241 Jy/beam ! Writing clean map to FITS file: J0025+3919_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.382409 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180084 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.141276 0.141276 0.282552 0.565104 1.13021 2.26042 4.52083 9.04166 18.0833 36.1667 72.3333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.382 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.711 x 5.531 at -9.119 degrees (North through East) ! Clean map min=-0.0016142 max=0.38241 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0025+3919_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:19 2017