! Started logfile: J0024-0811_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:40:00 2016 obs J0024-0811_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0024-0811_S_2014_06_09_pus_uva.fits ! AN table 1: 103 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.614455 visibilities/baseline/integration-bin. ! Found source: J0024-0811 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 11392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0024-0811_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938309Jy sigma=0.010069 ! Fit after self-cal, rms=0.908451Jy sigma=0.009740 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=9.636 mas, bpa=14.13 degrees ! Estimated noise=1093.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0706537 Jy ! Component: 100 - total flux cleaned = 0.0886473 Jy ! Total flux subtracted in 100 components = 0.0886473 Jy ! Clean residual min=-0.003809 max=0.007077 Jy/beam ! Clean residual mean=0.000010 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.0886473 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0886473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084541Jy sigma=0.000815 ! Fit after self-cal, rms=0.084567Jy sigma=0.000815 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.13 mas, bmaj=11.28 mas, bpa=12.45 degrees ! Estimated noise=630.173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111124 Jy ! Component: 100 - total flux cleaned = 0.016573 Jy ! Component: 150 - total flux cleaned = 0.019627 Jy ! Component: 200 - total flux cleaned = 0.0214446 Jy ! Total flux subtracted in 200 components = 0.0214446 Jy ! Clean residual min=-0.002422 max=0.002782 Jy/beam ! Clean residual mean=-0.000001 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.110092 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 59 components and 0.110092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083155Jy sigma=0.000799 ! Fit after self-cal, rms=0.083199Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00 KP 1.04 ! LA 1.15 MK 1.00* NL 0.99 OV 0.98 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 1.01 ! LA 1.10 MK 1.00* NL 1.06 OV 0.99 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.03 KP 0.92 ! LA 0.89 MK 1.00* NL 1.04 OV 0.92 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.04 KP 0.89 ! LA 0.84 MK 1.00* NL 1.09 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.083199Jy sigma=0.000798 ! Fit after self-cal, rms=0.081799Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.143 mas, bmaj=11.41 mas, bpa=12.41 degrees ! Estimated noise=628.783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167634 Jy ! Component: 100 - total flux cleaned = -4.54054e-05 Jy ! Component: 150 - total flux cleaned = -2.97225e-05 Jy ! Component: 200 - total flux cleaned = -1.56706e-05 Jy ! Total flux subtracted in 200 components = -1.56706e-05 Jy ! Clean residual min=-0.001905 max=0.001904 Jy/beam ! Clean residual mean=0.000000 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.110076 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.110076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081788Jy sigma=0.000792 ! Fit after self-cal, rms=0.081799Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081799Jy sigma=0.000791 ! Fit after self-cal, rms=0.081109Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.142 mas, bmaj=11.41 mas, bpa=12.54 degrees ! Estimated noise=628.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.45242e-05 Jy ! Component: 100 - total flux cleaned = 9.9019e-05 Jy ! Component: 150 - total flux cleaned = 0.000112059 Jy ! Component: 200 - total flux cleaned = 0.000124253 Jy ! Total flux subtracted in 200 components = 0.000124253 Jy ! Clean residual min=-0.001819 max=0.001717 Jy/beam ! Clean residual mean=-0.000000 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.1102 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 76 components and 0.1102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081104Jy sigma=0.000790 ! Fit after self-cal, rms=0.081112Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20898e-05 Jy ! Component: 100 - total flux cleaned = 4.36824e-05 Jy ! Component: 150 - total flux cleaned = 5.43647e-05 Jy ! Component: 200 - total flux cleaned = 6.42599e-05 Jy ! Total flux subtracted in 200 components = 6.42599e-05 Jy ! Clean residual min=-0.001823 max=0.001705 Jy/beam ! Clean residual mean=-0.000000 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.110265 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 0.110265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081109Jy sigma=0.000790 ! Fit after self-cal, rms=0.081107Jy sigma=0.000790 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081107Jy sigma=0.000790 ! Fit after self-cal, rms=0.081143Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.141 mas, bmaj=11.41 mas, bpa=12.58 degrees ! Estimated noise=629.336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89257e-05 Jy ! Component: 100 - total flux cleaned = 6.99299e-05 Jy ! Component: 150 - total flux cleaned = 8.03025e-05 Jy ! Component: 200 - total flux cleaned = 9.96931e-05 Jy ! Total flux subtracted in 200 components = 9.96931e-05 Jy ! Clean residual min=-0.001800 max=0.001662 Jy/beam ! Clean residual mean=-0.000000 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.110364 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 0.110364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081140Jy sigma=0.000790 ! Fit after self-cal, rms=0.081140Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37348e-05 Jy ! Component: 100 - total flux cleaned = 2.30849e-05 Jy ! Component: 150 - total flux cleaned = 4.08312e-05 Jy ! Component: 200 - total flux cleaned = 5.77436e-05 Jy ! Total flux subtracted in 200 components = 5.77436e-05 Jy ! Clean residual min=-0.001791 max=0.001648 Jy/beam ! Clean residual mean=-0.000000 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.110422 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.110422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081138Jy sigma=0.000790 ! Fit after self-cal, rms=0.081137Jy sigma=0.000790 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081137Jy sigma=0.000790 ! Fit after self-cal, rms=0.081208Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.902 mas, bmaj=17.76 mas, bpa=-2.838 degrees ! Estimated noise=705.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114905 Jy ! Component: 100 - total flux cleaned = 0.000149253 Jy ! Component: 150 - total flux cleaned = 0.000177547 Jy ! Component: 200 - total flux cleaned = 0.000201377 Jy ! Total flux subtracted in 200 components = 0.000201377 Jy ! Clean residual min=-0.001630 max=0.001560 Jy/beam ! Clean residual mean=-0.000000 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.110624 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.110624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081207Jy sigma=0.000790 ! Fit after self-cal, rms=0.081207Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.81575e-06 Jy ! Component: 100 - total flux cleaned = 2.12769e-05 Jy ! Component: 150 - total flux cleaned = 2.18341e-05 Jy ! Component: 200 - total flux cleaned = 2.88224e-05 Jy ! Total flux subtracted in 200 components = 2.88224e-05 Jy ! Clean residual min=-0.001638 max=0.001539 Jy/beam ! Clean residual mean=-0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.110652 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.110652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081207Jy sigma=0.000790 ! Fit after self-cal, rms=0.081206Jy sigma=0.000790 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=11.42 mas, bpa=12.61 degrees ! Estimated noise=629.819 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.14 x 11.42 at 12.61 degrees (North through East) ! Clean map min=-0.0017048 max=0.09283 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=9.712 mas, bpa=14.46 degrees ! Estimated noise=1093.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703704 Jy ! Component: 100 - total flux cleaned = 0.0889761 Jy ! Component: 150 - total flux cleaned = 0.0966865 Jy ! Component: 200 - total flux cleaned = 0.101021 Jy ! Total flux subtracted in 200 components = 0.101021 Jy ! Clean residual min=-0.003076 max=0.003241 Jy/beam ! Clean residual mean=0.000004 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.101021 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.101021 Jy ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=11.42 mas, bpa=12.61 degrees ! Estimated noise=629.819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426998 Jy ! Component: 100 - total flux cleaned = 0.00644093 Jy ! Component: 150 - total flux cleaned = 0.00765643 Jy ! Component: 200 - total flux cleaned = 0.00837865 Jy ! Total flux subtracted in 200 components = 0.00837865 Jy ! Clean residual min=-0.001810 max=0.001668 Jy/beam ! Clean residual mean=0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.1094 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.1094 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.902 mas, bmaj=17.76 mas, bpa=-2.838 degrees ! Estimated noise=705.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677517 Jy ! Component: 100 - total flux cleaned = 0.000839321 Jy ! Component: 150 - total flux cleaned = 0.000860443 Jy ! Component: 200 - total flux cleaned = 0.000880934 Jy ! Total flux subtracted in 200 components = 0.000880934 Jy ! Clean residual min=-0.001645 max=0.001577 Jy/beam ! Clean residual mean=0.000000 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.110281 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96022e-05 Jy ! Component: 100 - total flux cleaned = 3.83124e-05 Jy ! Component: 150 - total flux cleaned = 4.7428e-05 Jy ! Component: 200 - total flux cleaned = 6.50903e-05 Jy ! Total flux subtracted in 200 components = 6.50903e-05 Jy ! Clean residual min=-0.001643 max=0.001564 Jy/beam ! Clean residual mean=0.000000 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.110346 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.110346 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=11.42 mas, bpa=12.61 degrees ! Estimated noise=629.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.29455e-05 Jy ! Component: 100 - total flux cleaned = -8.18575e-05 Jy ! Component: 150 - total flux cleaned = -8.14323e-05 Jy ! Component: 200 - total flux cleaned = -9.18674e-05 Jy ! Total flux subtracted in 200 components = -9.18674e-05 Jy ! Clean residual min=-0.001814 max=0.001679 Jy/beam ! Clean residual mean=-0.000000 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.110254 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.110254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081211Jy sigma=0.000790 ! Fit after self-cal, rms=0.081210Jy sigma=0.000790 wmodel J0024-0811_S_2014_06_09_pus_map.mod ! Writing 76 model components to file: J0024-0811_S_2014_06_09_pus_map.mod wobs J0024-0811_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0024-0811_S_2014_06_09_pus_uvs.fits wwins J0024-0811_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J0024-0811_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299447 Jy ! Component: 100 - total flux cleaned = -0.000446319 Jy ! Component: 150 - total flux cleaned = -0.000474288 Jy ! Component: 200 - total flux cleaned = -0.000553582 Jy ! Component: 250 - total flux cleaned = -0.000578546 Jy ! Component: 300 - total flux cleaned = -0.000602832 Jy ! Component: 350 - total flux cleaned = -0.000625904 Jy ! Component: 400 - total flux cleaned = -0.000625245 Jy ! Component: 450 - total flux cleaned = -0.000646824 Jy ! Component: 500 - total flux cleaned = -0.000646712 Jy ! Component: 550 - total flux cleaned = -0.000625777 Jy ! Component: 600 - total flux cleaned = -0.000584988 Jy ! Component: 650 - total flux cleaned = -0.000565211 Jy ! Component: 700 - total flux cleaned = -0.000584018 Jy ! Component: 750 - total flux cleaned = -0.000564886 Jy ! Component: 800 - total flux cleaned = -0.000564898 Jy ! Component: 850 - total flux cleaned = -0.000564721 Jy ! Component: 900 - total flux cleaned = -0.000529494 Jy ! Component: 950 - total flux cleaned = -0.000529393 Jy ! Component: 1000 - total flux cleaned = -0.000478784 Jy ! Component: 1050 - total flux cleaned = -0.00046269 Jy ! Component: 1100 - total flux cleaned = -0.000463182 Jy ! Component: 1150 - total flux cleaned = -0.000463307 Jy ! Component: 1200 - total flux cleaned = -0.000495128 Jy ! Component: 1250 - total flux cleaned = -0.000541637 Jy ! Component: 1300 - total flux cleaned = -0.000556651 Jy ! Component: 1350 - total flux cleaned = -0.000571835 Jy ! Component: 1400 - total flux cleaned = -0.000601632 Jy ! Component: 1450 - total flux cleaned = -0.000659356 Jy ! Component: 1500 - total flux cleaned = -0.000630304 Jy ! Component: 1550 - total flux cleaned = -0.000686943 Jy ! Component: 1600 - total flux cleaned = -0.000700972 Jy ! Component: 1650 - total flux cleaned = -0.000700758 Jy ! Component: 1700 - total flux cleaned = -0.000700709 Jy ! Component: 1750 - total flux cleaned = -0.000687602 Jy ! Component: 1800 - total flux cleaned = -0.000700944 Jy ! Component: 1850 - total flux cleaned = -0.000675136 Jy ! Component: 1900 - total flux cleaned = -0.000687971 Jy ! Component: 1950 - total flux cleaned = -0.000700608 Jy ! Component: 2000 - total flux cleaned = -0.000700453 Jy ! Component: 2050 - total flux cleaned = -0.000688493 Jy ! Component: 2100 - total flux cleaned = -0.00074926 Jy ! Component: 2150 - total flux cleaned = -0.000725006 Jy ! Component: 2200 - total flux cleaned = -0.000725034 Jy ! Component: 2250 - total flux cleaned = -0.000678255 Jy ! Component: 2300 - total flux cleaned = -0.000701432 Jy ! Component: 2350 - total flux cleaned = -0.000678491 Jy ! Component: 2400 - total flux cleaned = -0.000701281 Jy ! Component: 2450 - total flux cleaned = -0.000690148 Jy ! Component: 2500 - total flux cleaned = -0.000690139 Jy ! Component: 2550 - total flux cleaned = -0.000734097 Jy ! Component: 2600 - total flux cleaned = -0.000766603 Jy ! Component: 2650 - total flux cleaned = -0.000745143 Jy ! Component: 2700 - total flux cleaned = -0.000798504 Jy ! Component: 2750 - total flux cleaned = -0.000830163 Jy ! Component: 2800 - total flux cleaned = -0.000871934 Jy ! Component: 2850 - total flux cleaned = -0.000882198 Jy ! Component: 2900 - total flux cleaned = -0.000943756 Jy ! Component: 2950 - total flux cleaned = -0.000933747 Jy ! Component: 3000 - total flux cleaned = -0.000974223 Jy ! Component: 3050 - total flux cleaned = -0.0010242 Jy ! Component: 3100 - total flux cleaned = -0.00104399 Jy ! Component: 3150 - total flux cleaned = -0.00107359 Jy ! Component: 3200 - total flux cleaned = -0.00111257 Jy ! Component: 3250 - total flux cleaned = -0.00115127 Jy ! Component: 3300 - total flux cleaned = -0.00117049 Jy ! Component: 3350 - total flux cleaned = -0.00120867 Jy ! Component: 3400 - total flux cleaned = -0.00123707 Jy ! Component: 3450 - total flux cleaned = -0.00128398 Jy ! Component: 3500 - total flux cleaned = -0.00132126 Jy ! Component: 3550 - total flux cleaned = -0.00136742 Jy ! Component: 3600 - total flux cleaned = -0.00137667 Jy ! Component: 3650 - total flux cleaned = -0.00140402 Jy ! Component: 3700 - total flux cleaned = -0.00141301 Jy ! Component: 3750 - total flux cleaned = -0.001422 Jy ! Component: 3800 - total flux cleaned = -0.0014309 Jy ! Component: 3850 - total flux cleaned = -0.00143091 Jy ! Component: 3900 - total flux cleaned = -0.0013957 Jy ! Component: 3950 - total flux cleaned = -0.00142203 Jy ! Component: 4000 - total flux cleaned = -0.00142196 Jy ! Component: 4050 - total flux cleaned = -0.00140458 Jy ! Total flux subtracted in 4096 components = -0.00137018 Jy ! Clean residual min=-0.000569 max=0.000620 Jy/beam ! Clean residual mean=-0.000002 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.108884 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 334 components and 0.108884 Jy ![Exited script file: muppet] wmap "J0024-0811_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.14 x 11.42 at 12.61 degrees (North through East) ! Clean map min=-0.0016229 max=0.093345 Jy/beam ! Writing clean map to FITS file: J0024-0811_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0933449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162668 device "J0024-0811_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0024-0811_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.522796 0.522796 1.04559 2.09119 4.18237 8.36474 16.7295 33.459 66.9179 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.14 x 11.42 at 12.61 degrees (North through East) ! Clean map min=-0.0016229 max=0.093345 Jy/beam quit ! Quitting program ! Log file J0024-0811_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:40:05 2016