! Started logfile: J0022+0608_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:10:25 2016
obs J0022+0608_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0022+0608_S_2014_08_05_pus_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.777778 visibilities/baseline/integration-bin.
! Found source: J0022+0608
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 2240 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0022+0608_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.740848Jy  sigma=0.008075
! Fit after  self-cal, rms=0.735440Jy  sigma=0.008019
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.119 mas, bmaj=11.31 mas, bpa=24.89 degrees
! Estimated noise=2069.79 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.206006 Jy
! Component: 100  -  total flux cleaned = 0.251167 Jy
! Total flux subtracted in 100 components = 0.251167 Jy
! Clean residual min=-0.009101 max=0.013889 Jy/beam
! Clean residual mean=-0.000034 rms=0.002929 Jy/beam
! Combined flux in latest and established models = 0.251167 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.251167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086725Jy  sigma=0.000877
! Fit after  self-cal, rms=0.086711Jy  sigma=0.000877
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=11.26 mas, bpa=22.17 degrees
! Estimated noise=1396.94 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169412 Jy
! Component: 100  -  total flux cleaned = 0.0254391 Jy
! Component: 150  -  total flux cleaned = 0.0307823 Jy
! Component: 200  -  total flux cleaned = 0.0342837 Jy
! Total flux subtracted in 200 components = 0.0342837 Jy
! Clean residual min=-0.008140 max=0.006753 Jy/beam
! Clean residual mean=-0.000007 rms=0.001818 Jy/beam
! Combined flux in latest and established models = 0.285451 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 67 components and 0.285451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083091Jy  sigma=0.000843
! Fit after  self-cal, rms=0.083098Jy  sigma=0.000843
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.88     HN        0.97     KP        1.07     
!   LA        1.06     MK        1.00*    NL        0.96     OV        0.95     
!   PT        1.08     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.05     KP        1.00     
!   LA        1.06     MK        1.00*    NL        1.02     OV        1.01     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.18     HN        1.05     KP        0.87     
!   LA        0.86     MK        1.00*    NL        1.01     OV        0.93     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.07     HN        1.06     KP        0.87     
!   LA        0.82     MK        1.00*    NL        1.07     OV        0.98     
!   PT        1.04     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.083098Jy  sigma=0.000843
! Fit after  self-cal, rms=0.076904Jy  sigma=0.000785
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.11 mas, bmaj=11.34 mas, bpa=22.13 degrees
! Estimated noise=1391.76 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.90529e-05 Jy
! Component: 100  -  total flux cleaned = -0.000301151 Jy
! Component: 150  -  total flux cleaned = -0.000369191 Jy
! Component: 200  -  total flux cleaned = -0.000389468 Jy
! Total flux subtracted in 200 components = -0.000389468 Jy
! Clean residual min=-0.003692 max=0.003943 Jy/beam
! Clean residual mean=-0.000005 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.285061 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.285061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076882Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076897Jy  sigma=0.000784
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076897Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076873Jy  sigma=0.000784
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.108 mas, bmaj=11.35 mas, bpa=22.15 degrees
! Estimated noise=1391.05 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211547 Jy
! Component: 100  -  total flux cleaned = -0.000337821 Jy
! Component: 150  -  total flux cleaned = -0.000356307 Jy
! Component: 200  -  total flux cleaned = -0.000341077 Jy
! Total flux subtracted in 200 components = -0.000341077 Jy
! Clean residual min=-0.003682 max=0.003825 Jy/beam
! Clean residual mean=-0.000005 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.28472 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 90 components and 0.28472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076862Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076863Jy  sigma=0.000784
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.10575e-07 Jy
! Component: 100  -  total flux cleaned = 5.45606e-08 Jy
! Component: 150  -  total flux cleaned = 1.2757e-05 Jy
! Component: 200  -  total flux cleaned = 2.64781e-08 Jy
! Total flux subtracted in 200 components = 2.64781e-08 Jy
! Clean residual min=-0.003694 max=0.003749 Jy/beam
! Clean residual mean=-0.000005 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.28472 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 91 components and 0.28472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076857Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076857Jy  sigma=0.000784
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076857Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076827Jy  sigma=0.000784
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.106 mas, bmaj=11.36 mas, bpa=22.18 degrees
! Estimated noise=1390.24 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027362 Jy
! Component: 100  -  total flux cleaned = -0.000302382 Jy
! Component: 150  -  total flux cleaned = -0.000289547 Jy
! Component: 200  -  total flux cleaned = -0.000277383 Jy
! Total flux subtracted in 200 components = -0.000277383 Jy
! Clean residual min=-0.003684 max=0.003710 Jy/beam
! Clean residual mean=-0.000005 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.284443 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 94 components and 0.284443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076822Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076823Jy  sigma=0.000784
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04694e-05 Jy
! Component: 100  -  total flux cleaned = 2.20078e-05 Jy
! Component: 150  -  total flux cleaned = 2.21643e-05 Jy
! Component: 200  -  total flux cleaned = 2.18903e-05 Jy
! Total flux subtracted in 200 components = 2.18903e-05 Jy
! Clean residual min=-0.003680 max=0.003682 Jy/beam
! Clean residual mean=-0.000005 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.284465 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 98 components and 0.284465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076820Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076820Jy  sigma=0.000784
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076820Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076793Jy  sigma=0.000784
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.095 mas, bmaj=12.28 mas, bpa=15.18 degrees
! Estimated noise=1490.72 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109933 Jy
! Component: 100  -  total flux cleaned = -0.000213336 Jy
! Component: 150  -  total flux cleaned = -0.000233996 Jy
! Component: 200  -  total flux cleaned = -0.000234005 Jy
! Total flux subtracted in 200 components = -0.000234005 Jy
! Clean residual min=-0.004115 max=0.003998 Jy/beam
! Clean residual mean=-0.000008 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.284231 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 107 components and 0.284231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076791Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076792Jy  sigma=0.000784
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.32359e-05 Jy
! Component: 100  -  total flux cleaned = 1.35404e-05 Jy
! Component: 150  -  total flux cleaned = 2.22822e-05 Jy
! Component: 200  -  total flux cleaned = 2.22537e-05 Jy
! Total flux subtracted in 200 components = 2.22537e-05 Jy
! Clean residual min=-0.004117 max=0.003955 Jy/beam
! Clean residual mean=-0.000008 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.284253 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 112 components and 0.284253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076791Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076791Jy  sigma=0.000784
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.103 mas, bmaj=11.36 mas, bpa=22.2 degrees
! Estimated noise=1389.53 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.103 x 11.36 at 22.2 degrees (North through East)
! Clean map  min=-0.0036437  max=0.26576 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.128 mas, bmaj=11.38 mas, bpa=24.76 degrees
! Estimated noise=2046.81 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203691 Jy
! Component: 100  -  total flux cleaned = 0.248337 Jy
! Component: 150  -  total flux cleaned = 0.262093 Jy
! Component: 200  -  total flux cleaned = 0.268874 Jy
! Total flux subtracted in 200 components = 0.268874 Jy
! Clean residual min=-0.006605 max=0.005771 Jy/beam
! Clean residual mean=-0.000014 rms=0.001813 Jy/beam
! Combined flux in latest and established models = 0.268874 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.268874 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.103 mas, bmaj=11.36 mas, bpa=22.2 degrees
! Estimated noise=1389.53 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00618496 Jy
! Component: 100  -  total flux cleaned = 0.0095476 Jy
! Component: 150  -  total flux cleaned = 0.0111199 Jy
! Component: 200  -  total flux cleaned = 0.0120846 Jy
! Total flux subtracted in 200 components = 0.0120846 Jy
! Clean residual min=-0.003741 max=0.003757 Jy/beam
! Clean residual mean=-0.000010 rms=0.000969 Jy/beam
! Combined flux in latest and established models = 0.280958 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 76 components and 0.280958 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.095 mas, bmaj=12.28 mas, bpa=15.18 degrees
! Estimated noise=1490.72 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158839 Jy
! Component: 100  -  total flux cleaned = 0.00199259 Jy
! Component: 150  -  total flux cleaned = 0.00232106 Jy
! Component: 200  -  total flux cleaned = 0.0025396 Jy
! Total flux subtracted in 200 components = 0.0025396 Jy
! Clean residual min=-0.004184 max=0.004010 Jy/beam
! Clean residual mean=-0.000010 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.283498 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016595 Jy
! Component: 100  -  total flux cleaned = 0.000292001 Jy
! Component: 150  -  total flux cleaned = 0.000359914 Jy
! Component: 200  -  total flux cleaned = 0.000400778 Jy
! Total flux subtracted in 200 components = 0.000400778 Jy
! Clean residual min=-0.004142 max=0.003992 Jy/beam
! Clean residual mean=-0.000009 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.283899 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 97 components and 0.283899 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.103 mas, bmaj=11.36 mas, bpa=22.2 degrees
! Estimated noise=1389.53 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233688 Jy
! Component: 100  -  total flux cleaned = -0.000197764 Jy
! Component: 150  -  total flux cleaned = -0.000164941 Jy
! Component: 200  -  total flux cleaned = -0.000165583 Jy
! Total flux subtracted in 200 components = -0.000165583 Jy
! Clean residual min=-0.003662 max=0.003650 Jy/beam
! Clean residual mean=-0.000006 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.283733 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 108 components and 0.283733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076799Jy  sigma=0.000784
! Fit after  self-cal, rms=0.076796Jy  sigma=0.000784
wmodel J0022+0608_S_2014_08_05_pus_map.mod
! Writing 108 model components to file: J0022+0608_S_2014_08_05_pus_map.mod
wobs J0022+0608_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0022+0608_S_2014_08_05_pus_uvs.fits
wwins J0022+0608_S_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J0022+0608_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000449918 Jy
! Component: 100  -  total flux cleaned = -0.00130152 Jy
! Component: 150  -  total flux cleaned = -0.00198056 Jy
! Component: 200  -  total flux cleaned = -0.00256407 Jy
! Component: 250  -  total flux cleaned = -0.0029803 Jy
! Component: 300  -  total flux cleaned = -0.00315585 Jy
! Component: 350  -  total flux cleaned = -0.00328188 Jy
! Component: 400  -  total flux cleaned = -0.00344381 Jy
! Component: 450  -  total flux cleaned = -0.00355941 Jy
! Component: 500  -  total flux cleaned = -0.0035204 Jy
! Component: 550  -  total flux cleaned = -0.00352003 Jy
! Component: 600  -  total flux cleaned = -0.00348346 Jy
! Component: 650  -  total flux cleaned = -0.00341446 Jy
! Component: 700  -  total flux cleaned = -0.00338129 Jy
! Component: 750  -  total flux cleaned = -0.00338082 Jy
! Component: 800  -  total flux cleaned = -0.0032202 Jy
! Component: 850  -  total flux cleaned = -0.00318838 Jy
! Component: 900  -  total flux cleaned = -0.00303514 Jy
! Component: 950  -  total flux cleaned = -0.00288571 Jy
! Component: 1000  -  total flux cleaned = -0.00274032 Jy
! Component: 1050  -  total flux cleaned = -0.00259832 Jy
! Component: 1100  -  total flux cleaned = -0.00245892 Jy
! Component: 1150  -  total flux cleaned = -0.00234922 Jy
! Component: 1200  -  total flux cleaned = -0.00226852 Jy
! Component: 1250  -  total flux cleaned = -0.00218955 Jy
! Component: 1300  -  total flux cleaned = -0.00216363 Jy
! Component: 1350  -  total flux cleaned = -0.00206167 Jy
! Component: 1400  -  total flux cleaned = -0.00191205 Jy
! Component: 1450  -  total flux cleaned = -0.00188752 Jy
! Component: 1500  -  total flux cleaned = -0.00171854 Jy
! Component: 1550  -  total flux cleaned = -0.00169482 Jy
! Component: 1600  -  total flux cleaned = -0.00160135 Jy
! Component: 1650  -  total flux cleaned = -0.00155476 Jy
! Component: 1700  -  total flux cleaned = -0.00148638 Jy
! Component: 1750  -  total flux cleaned = -0.00141877 Jy
! Component: 1800  -  total flux cleaned = -0.00133022 Jy
! Component: 1850  -  total flux cleaned = -0.00124302 Jy
! Component: 1900  -  total flux cleaned = -0.00122137 Jy
! Component: 1950  -  total flux cleaned = -0.00126375 Jy
! Component: 2000  -  total flux cleaned = -0.0012218 Jy
! Component: 2050  -  total flux cleaned = -0.00122158 Jy
! Component: 2100  -  total flux cleaned = -0.00118047 Jy
! Component: 2150  -  total flux cleaned = -0.00116013 Jy
! Component: 2200  -  total flux cleaned = -0.00120011 Jy
! Component: 2250  -  total flux cleaned = -0.00121999 Jy
! Component: 2300  -  total flux cleaned = -0.00118085 Jy
! Component: 2350  -  total flux cleaned = -0.00118088 Jy
! Component: 2400  -  total flux cleaned = -0.00118087 Jy
! Component: 2450  -  total flux cleaned = -0.00119978 Jy
! Component: 2500  -  total flux cleaned = -0.00123737 Jy
! Component: 2550  -  total flux cleaned = -0.00127462 Jy
! Component: 2600  -  total flux cleaned = -0.00134831 Jy
! Component: 2650  -  total flux cleaned = -0.00138474 Jy
! Component: 2700  -  total flux cleaned = -0.00143895 Jy
! Component: 2750  -  total flux cleaned = -0.00145679 Jy
! Component: 2800  -  total flux cleaned = -0.00147451 Jy
! Component: 2850  -  total flux cleaned = -0.00149212 Jy
! Component: 2900  -  total flux cleaned = -0.00152694 Jy
! Component: 2950  -  total flux cleaned = -0.0015961 Jy
! Component: 3000  -  total flux cleaned = -0.0015791 Jy
! Component: 3050  -  total flux cleaned = -0.00163021 Jy
! Component: 3100  -  total flux cleaned = -0.00174829 Jy
! Component: 3150  -  total flux cleaned = -0.00178169 Jy
! Component: 3200  -  total flux cleaned = -0.00186487 Jy
! Component: 3250  -  total flux cleaned = -0.00186489 Jy
! Component: 3300  -  total flux cleaned = -0.00196311 Jy
! Component: 3350  -  total flux cleaned = -0.00199569 Jy
! Component: 3400  -  total flux cleaned = -0.00212516 Jy
! Component: 3450  -  total flux cleaned = -0.00217336 Jy
! Component: 3500  -  total flux cleaned = -0.00223728 Jy
! Component: 3550  -  total flux cleaned = -0.00231666 Jy
! Component: 3600  -  total flux cleaned = -0.00233251 Jy
! Component: 3650  -  total flux cleaned = -0.00239542 Jy
! Component: 3700  -  total flux cleaned = -0.00245794 Jy
! Component: 3750  -  total flux cleaned = -0.00256688 Jy
! Component: 3800  -  total flux cleaned = -0.00265976 Jy
! Component: 3850  -  total flux cleaned = -0.00276765 Jy
! Component: 3900  -  total flux cleaned = -0.00287511 Jy
! Component: 3950  -  total flux cleaned = -0.0029515 Jy
! Component: 4000  -  total flux cleaned = -0.00301237 Jy
! Component: 4050  -  total flux cleaned = -0.00308814 Jy
! Total flux subtracted in 4096 components = -0.00314851 Jy
! Clean residual min=-0.000820 max=0.000946 Jy/beam
! Clean residual mean=0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.280584 Jy
keep
! Adding 275 model components to the UV plane model.
! The established model now contains 383 components and 0.280584 Jy
![Exited script file: muppet]
wmap "J0022+0608_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.103 x 11.36 at 22.2 degrees (North through East)
! Clean map  min=-0.0021836  max=0.26558 Jy/beam
! Writing clean map to FITS file: J0022+0608_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.265585 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000264124 
device "J0022+0608_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0022+0608_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.29835 0.29835 0.5967 1.1934 2.3868 4.7736 9.54721 19.0944 38.1888 76.3777
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.265 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.103 x 11.36 at 22.2 degrees (North through East)
! Clean map  min=-0.0021836  max=0.26558 Jy/beam
quit
! Quitting program
! Log file J0022+0608_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:10:30 2016