! Started logfile: J0019-3031_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:48:40 2016
obs J0019-3031_S_2014_08_09_pus_uva.fits
! Reading UV FITS file: J0019-3031_S_2014_08_09_pus_uva.fits
! AN table 1: 94 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.77565 visibilities/baseline/integration-bin.
! Found source: J0019-3031
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 342 lines of history.
! 
! Reading 13124 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0019-3031_S_2014_08_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.721013Jy  sigma=0.005649
! Fit after  self-cal, rms=0.681326Jy  sigma=0.005327
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.111 mas, bmaj=12.33 mas, bpa=18.84 degrees
! Estimated noise=1056.76 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.259694 Jy
! Component: 100  -  total flux cleaned = 0.326935 Jy
! Total flux subtracted in 100 components = 0.326935 Jy
! Clean residual min=-0.015857 max=0.030062 Jy/beam
! Clean residual mean=-0.000105 rms=0.005186 Jy/beam
! Combined flux in latest and established models = 0.326936 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.326936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144953Jy  sigma=0.001009
! Fit after  self-cal, rms=0.144912Jy  sigma=0.001009
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.946 mas, bmaj=14.73 mas, bpa=17.44 degrees
! Estimated noise=780.061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0407243 Jy
! Component: 100  -  total flux cleaned = 0.060867 Jy
! Component: 150  -  total flux cleaned = 0.0726621 Jy
! Component: 200  -  total flux cleaned = 0.0799246 Jy
! Total flux subtracted in 200 components = 0.0799246 Jy
! Clean residual min=-0.011955 max=0.014323 Jy/beam
! Clean residual mean=-0.000050 rms=0.003259 Jy/beam
! Combined flux in latest and established models = 0.40686 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 36 components and 0.40686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133651Jy  sigma=0.000905
! Fit after  self-cal, rms=0.133613Jy  sigma=0.000905
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.84     HN        1.22     KP        1.06     
!   LA        1.11     MK        1.00*    NL        0.96     OV        0.96     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.30     KP        1.02     
!   LA        1.07     MK        1.00*    NL        1.01     OV        1.00     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.12     HN        1.33     KP        0.90     
!   LA        0.84     MK        1.00*    NL        0.99     OV        0.93     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.18     KP        0.88     
!   LA        0.80     MK        1.00*    NL        1.08     OV        0.97     
!   PT        1.05     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.133613Jy  sigma=0.000905
! Fit after  self-cal, rms=0.132907Jy  sigma=0.000839
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.968 mas, bmaj=15.16 mas, bpa=18.04 degrees
! Estimated noise=780.566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00839252 Jy
! Component: 100  -  total flux cleaned = -0.00948575 Jy
! Component: 150  -  total flux cleaned = -0.0104382 Jy
! Component: 200  -  total flux cleaned = -0.0110642 Jy
! Total flux subtracted in 200 components = -0.0110642 Jy
! Clean residual min=-0.010955 max=0.012310 Jy/beam
! Clean residual mean=-0.000036 rms=0.002513 Jy/beam
! Combined flux in latest and established models = 0.395796 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 46 components and 0.395796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131442Jy  sigma=0.000831
! Fit after  self-cal, rms=0.131433Jy  sigma=0.000831
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131433Jy  sigma=0.000831
! Fit after  self-cal, rms=0.180439Jy  sigma=0.000793
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.962 mas, bmaj=15 mas, bpa=17.66 degrees
! Estimated noise=783.792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00616092 Jy
! Component: 100  -  total flux cleaned = -0.00750475 Jy
! Component: 150  -  total flux cleaned = -0.00841796 Jy
! Component: 200  -  total flux cleaned = -0.00888864 Jy
! Total flux subtracted in 200 components = -0.00888864 Jy
! Clean residual min=-0.006243 max=0.004753 Jy/beam
! Clean residual mean=-0.000035 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 0.386907 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.386907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180131Jy  sigma=0.000786
! Fit after  self-cal, rms=0.180456Jy  sigma=0.000786
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132462 Jy
! Component: 100  -  total flux cleaned = -1.33855e-05 Jy
! Component: 150  -  total flux cleaned = -1.91807e-05 Jy
! Component: 200  -  total flux cleaned = -1.93809e-05 Jy
! Total flux subtracted in 200 components = -1.93809e-05 Jy
! Clean residual min=-0.005624 max=0.004544 Jy/beam
! Clean residual mean=-0.000035 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 0.386888 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.386888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180450Jy  sigma=0.000784
! Fit after  self-cal, rms=0.180463Jy  sigma=0.000784
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.180463Jy  sigma=0.000784
! Fit after  self-cal, rms=0.206680Jy  sigma=0.000782
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.966 mas, bmaj=15.03 mas, bpa=17.71 degrees
! Estimated noise=783.713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00420672 Jy
! Component: 100  -  total flux cleaned = -0.00491497 Jy
! Component: 150  -  total flux cleaned = -0.00515595 Jy
! Component: 200  -  total flux cleaned = -0.00526829 Jy
! Total flux subtracted in 200 components = -0.00526829 Jy
! Clean residual min=-0.004890 max=0.004026 Jy/beam
! Clean residual mean=-0.000032 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.38162 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.38162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206508Jy  sigma=0.000779
! Fit after  self-cal, rms=0.206612Jy  sigma=0.000779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207643 Jy
! Component: 100  -  total flux cleaned = -0.00039714 Jy
! Component: 150  -  total flux cleaned = -0.000565003 Jy
! Component: 200  -  total flux cleaned = -0.000639929 Jy
! Total flux subtracted in 200 components = -0.000639929 Jy
! Clean residual min=-0.004384 max=0.004076 Jy/beam
! Clean residual mean=-0.000033 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.38098 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 62 components and 0.38098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206570Jy  sigma=0.000778
! Fit after  self-cal, rms=0.206593Jy  sigma=0.000778
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206593Jy  sigma=0.000778
! Fit after  self-cal, rms=0.216842Jy  sigma=0.000777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.675 mas, bmaj=24.28 mas, bpa=7.728 degrees
! Estimated noise=853.39 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00357129 Jy
! Component: 100  -  total flux cleaned = -0.00405016 Jy
! Component: 150  -  total flux cleaned = -0.00417191 Jy
! Component: 200  -  total flux cleaned = -0.00427907 Jy
! Total flux subtracted in 200 components = -0.00427907 Jy
! Clean residual min=-0.003793 max=0.003785 Jy/beam
! Clean residual mean=-0.000050 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.376701 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 90 components and 0.376701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216775Jy  sigma=0.000776
! Fit after  self-cal, rms=0.216829Jy  sigma=0.000776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.8533e-05 Jy
! Component: 100  -  total flux cleaned = -0.000186533 Jy
! Component: 150  -  total flux cleaned = -0.000266218 Jy
! Component: 200  -  total flux cleaned = -0.000304039 Jy
! Total flux subtracted in 200 components = -0.000304039 Jy
! Clean residual min=-0.003592 max=0.003919 Jy/beam
! Clean residual mean=-0.000051 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.376397 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 90 components and 0.376397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216809Jy  sigma=0.000776
! Fit after  self-cal, rms=0.216819Jy  sigma=0.000776
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.968 mas, bmaj=15.08 mas, bpa=17.78 degrees
! Estimated noise=783.03 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.968 x 15.08 at 17.78 degrees (North through East)
! Clean map  min=-0.0036972  max=0.32933 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.074 mas, bmaj=12.53 mas, bpa=19.13 degrees
! Estimated noise=1086.49 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.266888 Jy
! Component: 100  -  total flux cleaned = 0.325236 Jy
! Component: 150  -  total flux cleaned = 0.344214 Jy
! Component: 200  -  total flux cleaned = 0.355088 Jy
! Total flux subtracted in 200 components = 0.355088 Jy
! Clean residual min=-0.003873 max=0.006517 Jy/beam
! Clean residual mean=-0.000045 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.355088 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.355088 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.968 mas, bmaj=15.08 mas, bpa=17.78 degrees
! Estimated noise=783.03 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00886205 Jy
! Component: 100  -  total flux cleaned = 0.0136185 Jy
! Component: 150  -  total flux cleaned = 0.0163785 Jy
! Component: 200  -  total flux cleaned = 0.0180501 Jy
! Total flux subtracted in 200 components = 0.0180501 Jy
! Clean residual min=-0.002872 max=0.003939 Jy/beam
! Clean residual mean=-0.000038 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.373139 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 88 components and 0.373139 Jy
! Inverting map 
! Added new window around map position (-42, 97).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381783 Jy
! Component: 100  -  total flux cleaned = 0.00499801 Jy
! Component: 150  -  total flux cleaned = 0.00560528 Jy
! Component: 200  -  total flux cleaned = 0.00572004 Jy
! Total flux subtracted in 200 components = 0.00572004 Jy
! Clean residual min=-0.002731 max=0.002966 Jy/beam
! Clean residual mean=-0.000025 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.378859 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.378859 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.675 mas, bmaj=24.28 mas, bpa=7.728 degrees
! Estimated noise=853.39 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000558419 Jy
! Component: 100  -  total flux cleaned = 0.000784207 Jy
! Component: 150  -  total flux cleaned = 0.00100789 Jy
! Component: 200  -  total flux cleaned = 0.00109425 Jy
! Total flux subtracted in 200 components = 0.00109425 Jy
! Clean residual min=-0.002898 max=0.002957 Jy/beam
! Clean residual mean=-0.000032 rms=0.000935 Jy/beam
! Combined flux in latest and established models = 0.379953 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.70112e-05 Jy
! Component: 100  -  total flux cleaned = 2.74904e-05 Jy
! Component: 150  -  total flux cleaned = 2.82083e-05 Jy
! Component: 200  -  total flux cleaned = 5.31699e-05 Jy
! Total flux subtracted in 200 components = 5.31699e-05 Jy
! Clean residual min=-0.002864 max=0.002915 Jy/beam
! Clean residual mean=-0.000031 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.380006 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 146 components and 0.380006 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.968 mas, bmaj=15.08 mas, bpa=17.78 degrees
! Estimated noise=783.03 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000379065 Jy
! Component: 100  -  total flux cleaned = -0.000553587 Jy
! Component: 150  -  total flux cleaned = -0.00055316 Jy
! Component: 200  -  total flux cleaned = -0.000627275 Jy
! Total flux subtracted in 200 components = -0.000627275 Jy
! Clean residual min=-0.002748 max=0.002821 Jy/beam
! Clean residual mean=-0.000022 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.379379 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 159 components and 0.379379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216662Jy  sigma=0.000773
! Fit after  self-cal, rms=0.216678Jy  sigma=0.000773
wmodel J0019-3031_S_2014_08_09_pus_map.mod
! Writing 159 model components to file: J0019-3031_S_2014_08_09_pus_map.mod
wobs J0019-3031_S_2014_08_09_pus_uvs.fits
! Writing UV FITS file: J0019-3031_S_2014_08_09_pus_uvs.fits
wwins J0019-3031_S_2014_08_09_pus_map.win
! wwins: Wrote 2 windows to J0019-3031_S_2014_08_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000296958 Jy
! Component: 100  -  total flux cleaned = 7.07912e-05 Jy
! Component: 150  -  total flux cleaned = -1.22791e-05 Jy
! Component: 200  -  total flux cleaned = -5.27353e-05 Jy
! Component: 250  -  total flux cleaned = -1.43225e-05 Jy
! Component: 300  -  total flux cleaned = -5.28044e-05 Jy
! Component: 350  -  total flux cleaned = -1.65992e-05 Jy
! Component: 400  -  total flux cleaned = -1.69738e-05 Jy
! Component: 450  -  total flux cleaned = 4.96561e-05 Jy
! Component: 500  -  total flux cleaned = -8.17708e-05 Jy
! Component: 550  -  total flux cleaned = -8.1463e-05 Jy
! Component: 600  -  total flux cleaned = -0.00014354 Jy
! Component: 650  -  total flux cleaned = -8.27514e-05 Jy
! Component: 700  -  total flux cleaned = 3.51533e-05 Jy
! Component: 750  -  total flux cleaned = 3.45032e-05 Jy
! Component: 800  -  total flux cleaned = -7.83865e-05 Jy
! Component: 850  -  total flux cleaned = -0.000215787 Jy
! Component: 900  -  total flux cleaned = -0.000242595 Jy
! Component: 950  -  total flux cleaned = -0.000242396 Jy
! Component: 1000  -  total flux cleaned = -0.000321088 Jy
! Component: 1050  -  total flux cleaned = -0.000320762 Jy
! Component: 1100  -  total flux cleaned = -0.000295426 Jy
! Component: 1150  -  total flux cleaned = -0.000320476 Jy
! Component: 1200  -  total flux cleaned = -0.00034481 Jy
! Component: 1250  -  total flux cleaned = -0.000392456 Jy
! Component: 1300  -  total flux cleaned = -0.000439835 Jy
! Component: 1350  -  total flux cleaned = -0.000440075 Jy
! Component: 1400  -  total flux cleaned = -0.000531783 Jy
! Component: 1450  -  total flux cleaned = -0.000577061 Jy
! Component: 1500  -  total flux cleaned = -0.000687957 Jy
! Component: 1550  -  total flux cleaned = -0.000687657 Jy
! Component: 1600  -  total flux cleaned = -0.000795123 Jy
! Component: 1650  -  total flux cleaned = -0.000731327 Jy
! Component: 1700  -  total flux cleaned = -0.00083667 Jy
! Component: 1750  -  total flux cleaned = -0.000836814 Jy
! Component: 1800  -  total flux cleaned = -0.00091831 Jy
! Component: 1850  -  total flux cleaned = -0.000918039 Jy
! Component: 1900  -  total flux cleaned = -0.000997555 Jy
! Component: 1950  -  total flux cleaned = -0.000997576 Jy
! Component: 2000  -  total flux cleaned = -0.00101708 Jy
! Component: 2050  -  total flux cleaned = -0.00101727 Jy
! Component: 2100  -  total flux cleaned = -0.00107456 Jy
! Component: 2150  -  total flux cleaned = -0.00111231 Jy
! Component: 2200  -  total flux cleaned = -0.00105698 Jy
! Component: 2250  -  total flux cleaned = -0.00114914 Jy
! Component: 2300  -  total flux cleaned = -0.00120363 Jy
! Component: 2350  -  total flux cleaned = -0.00114968 Jy
! Component: 2400  -  total flux cleaned = -0.00120335 Jy
! Component: 2450  -  total flux cleaned = -0.00125619 Jy
! Component: 2500  -  total flux cleaned = -0.00125596 Jy
! Component: 2550  -  total flux cleaned = -0.0012731 Jy
! Component: 2600  -  total flux cleaned = -0.00122142 Jy
! Component: 2650  -  total flux cleaned = -0.00123837 Jy
! Component: 2700  -  total flux cleaned = -0.00125528 Jy
! Component: 2750  -  total flux cleaned = -0.00115503 Jy
! Component: 2800  -  total flux cleaned = -0.00115517 Jy
! Component: 2850  -  total flux cleaned = -0.00113864 Jy
! Component: 2900  -  total flux cleaned = -0.00107331 Jy
! Component: 2950  -  total flux cleaned = -0.00104118 Jy
! Component: 3000  -  total flux cleaned = -0.00108957 Jy
! Component: 3050  -  total flux cleaned = -0.00100994 Jy
! Component: 3100  -  total flux cleaned = -0.00100995 Jy
! Component: 3150  -  total flux cleaned = -0.00101 Jy
! Component: 3200  -  total flux cleaned = -0.000963204 Jy
! Component: 3250  -  total flux cleaned = -0.000932271 Jy
! Component: 3300  -  total flux cleaned = -0.000962939 Jy
! Component: 3350  -  total flux cleaned = -0.000932375 Jy
! Component: 3400  -  total flux cleaned = -0.000932386 Jy
! Component: 3450  -  total flux cleaned = -0.000947479 Jy
! Component: 3500  -  total flux cleaned = -0.00094738 Jy
! Component: 3550  -  total flux cleaned = -0.000932624 Jy
! Component: 3600  -  total flux cleaned = -0.000962002 Jy
! Component: 3650  -  total flux cleaned = -0.000932646 Jy
! Component: 3700  -  total flux cleaned = -0.000976272 Jy
! Component: 3750  -  total flux cleaned = -0.000961599 Jy
! Component: 3800  -  total flux cleaned = -0.000918602 Jy
! Component: 3850  -  total flux cleaned = -0.00090429 Jy
! Component: 3900  -  total flux cleaned = -0.000904345 Jy
! Component: 3950  -  total flux cleaned = -0.000890311 Jy
! Component: 4000  -  total flux cleaned = -0.000876311 Jy
! Component: 4050  -  total flux cleaned = -0.000862264 Jy
! Total flux subtracted in 4096 components = -0.000903862 Jy
! Clean residual min=-0.001088 max=0.000871 Jy/beam
! Clean residual mean=-0.000006 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.378475 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 471 components and 0.378475 Jy
![Exited script file: muppet]
wmap "J0019-3031_S_2014_08_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.968 x 15.08 at 17.78 degrees (North through East)
! Clean map  min=-0.0021985  max=0.33293 Jy/beam
! Writing clean map to FITS file: J0019-3031_S_2014_08_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.332932 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000283765 
device "J0019-3031_S_2014_08_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0019-3031_S_2014_08_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.255696 0.255696 0.511392 1.02278 2.04557 4.09114 8.18228 16.3646 32.7291 65.4582
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.332 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.968 x 15.08 at 17.78 degrees (North through East)
! Clean map  min=-0.0021985  max=0.33293 Jy/beam
quit
! Quitting program
! Log file J0019-3031_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:48:46 2016