! Started logfile: J0019+7327_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:12:06 2017 obs J0019+7327_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0019+7327_S_2014_01_04_pus_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0019+7327 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 2880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0019+7327_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.493556Jy sigma=0.006548 ! Fit after self-cal, rms=0.460978Jy sigma=0.006173 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=9.896 mas, bpa=78.64 degrees ! Estimated noise=1260.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.424556 Jy ! Component: 100 - total flux cleaned = 0.526257 Jy ! Total flux subtracted in 100 components = 0.526257 Jy ! Clean residual min=-0.032622 max=0.041074 Jy/beam ! Clean residual mean=-0.000014 rms=0.007574 Jy/beam ! Combined flux in latest and established models = 0.526257 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.526257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163851Jy sigma=0.001941 ! Fit after self-cal, rms=0.163929Jy sigma=0.001940 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=11.03 mas, bpa=79.41 degrees ! Estimated noise=1042.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602213 Jy ! Component: 100 - total flux cleaned = 0.0875615 Jy ! Component: 150 - total flux cleaned = 0.103075 Jy ! Component: 200 - total flux cleaned = 0.114484 Jy ! Total flux subtracted in 200 components = 0.114484 Jy ! Clean residual min=-0.021568 max=0.017563 Jy/beam ! Clean residual mean=-0.000006 rms=0.004417 Jy/beam ! Combined flux in latest and established models = 0.64074 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 46 components and 0.64074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139960Jy sigma=0.001663 ! Fit after self-cal, rms=0.139980Jy sigma=0.001662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.00 ! MK 1.05 NL 0.98 OV 0.96 PT 1.01 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.98 ! MK 1.03 NL 1.04 OV 0.98 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.81 ! MK 1.06 NL 0.99 OV 0.93 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.85 ! MK 1.04 NL 1.07 OV 0.97 PT 0.94 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.139980Jy sigma=0.001662 ! Fit after self-cal, rms=0.125100Jy sigma=0.001447 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=11.03 mas, bpa=79.2 degrees ! Estimated noise=1033.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (79, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00594269 Jy ! Component: 100 - total flux cleaned = 0.00526632 Jy ! Component: 150 - total flux cleaned = 0.00441345 Jy ! Component: 200 - total flux cleaned = 0.00404786 Jy ! Total flux subtracted in 200 components = 0.00404786 Jy ! Clean residual min=-0.006149 max=0.006709 Jy/beam ! Clean residual mean=0.000000 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.644788 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.644788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124450Jy sigma=0.001440 ! Fit after self-cal, rms=0.124175Jy sigma=0.001440 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124175Jy sigma=0.001440 ! Fit after self-cal, rms=0.124807Jy sigma=0.001432 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=11.07 mas, bpa=79.11 degrees ! Estimated noise=1033.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168636 Jy ! Component: 100 - total flux cleaned = -0.00156865 Jy ! Component: 150 - total flux cleaned = -0.0017561 Jy ! Component: 200 - total flux cleaned = -0.00220453 Jy ! Total flux subtracted in 200 components = -0.00220453 Jy ! Clean residual min=-0.004933 max=0.006223 Jy/beam ! Clean residual mean=0.000000 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.642584 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.642584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124560Jy sigma=0.001430 ! Fit after self-cal, rms=0.124534Jy sigma=0.001430 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (94, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445573 Jy ! Component: 100 - total flux cleaned = 0.00631844 Jy ! Component: 150 - total flux cleaned = 0.00744952 Jy ! Component: 200 - total flux cleaned = 0.0079918 Jy ! Total flux subtracted in 200 components = 0.0079918 Jy ! Clean residual min=-0.005064 max=0.004968 Jy/beam ! Clean residual mean=-0.000001 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.650576 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 108 components and 0.650576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124197Jy sigma=0.001426 ! Fit after self-cal, rms=0.124153Jy sigma=0.001425 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124153Jy sigma=0.001425 ! Fit after self-cal, rms=0.124698Jy sigma=0.001425 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=11.08 mas, bpa=79.03 degrees ! Estimated noise=1031.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269781 Jy ! Component: 100 - total flux cleaned = 0.00017847 Jy ! Component: 150 - total flux cleaned = 0.000501295 Jy ! Component: 200 - total flux cleaned = 0.000502122 Jy ! Total flux subtracted in 200 components = 0.000502122 Jy ! Clean residual min=-0.004397 max=0.004422 Jy/beam ! Clean residual mean=-0.000000 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.651078 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 123 components and 0.651078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124543Jy sigma=0.001423 ! Fit after self-cal, rms=0.124530Jy sigma=0.001423 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034208 Jy ! Component: 100 - total flux cleaned = 0.000554947 Jy ! Component: 150 - total flux cleaned = 0.000623434 Jy ! Component: 200 - total flux cleaned = 0.000563394 Jy ! Total flux subtracted in 200 components = 0.000563394 Jy ! Clean residual min=-0.004195 max=0.004148 Jy/beam ! Clean residual mean=-0.000000 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.651641 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 133 components and 0.651641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124449Jy sigma=0.001423 ! Fit after self-cal, rms=0.124446Jy sigma=0.001422 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124446Jy sigma=0.001422 ! Fit after self-cal, rms=0.124860Jy sigma=0.001422 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.661 mas, bmaj=13.41 mas, bpa=79.45 degrees ! Estimated noise=1185.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197072 Jy ! Component: 100 - total flux cleaned = 0.000119414 Jy ! Component: 150 - total flux cleaned = 0.00025651 Jy ! Component: 200 - total flux cleaned = 0.000409277 Jy ! Total flux subtracted in 200 components = 0.000409277 Jy ! Clean residual min=-0.002874 max=0.002464 Jy/beam ! Clean residual mean=-0.000002 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.65205 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 156 components and 0.65205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124843Jy sigma=0.001422 ! Fit after self-cal, rms=0.124839Jy sigma=0.001422 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290454 Jy ! Component: 100 - total flux cleaned = -0.000263736 Jy ! Component: 150 - total flux cleaned = -0.000238437 Jy ! Component: 200 - total flux cleaned = -0.000190496 Jy ! Total flux subtracted in 200 components = -0.000190496 Jy ! Clean residual min=-0.002870 max=0.002473 Jy/beam ! Clean residual mean=-0.000002 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.65186 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 173 components and 0.65186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124827Jy sigma=0.001422 ! Fit after self-cal, rms=0.124826Jy sigma=0.001422 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=11.08 mas, bpa=78.98 degrees ! Estimated noise=1030.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 11.08 at 78.98 degrees (North through East) ! Clean map min=-0.0039714 max=0.55812 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124826Jy sigma=0.001422 ! Fit after self-cal, rms=0.349207Jy sigma=0.000788 ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=11.09 mas, bpa=78.95 degrees ! Estimated noise=1030.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128463 Jy ! Component: 100 - total flux cleaned = -0.00135326 Jy ! Component: 150 - total flux cleaned = -0.00135363 Jy ! Component: 200 - total flux cleaned = -0.0013562 Jy ! Total flux subtracted in 200 components = -0.0013562 Jy ! Clean residual min=-0.003547 max=0.003546 Jy/beam ! Clean residual mean=-0.000000 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.650504 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 187 components and 0.650504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349171Jy sigma=0.000787 ! Fit after self-cal, rms=0.349160Jy sigma=0.000787 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.49097e-05 Jy ! Component: 100 - total flux cleaned = -6.58349e-05 Jy ! Component: 150 - total flux cleaned = -1.72767e-05 Jy ! Component: 200 - total flux cleaned = -6.48648e-05 Jy ! Total flux subtracted in 200 components = -6.48648e-05 Jy ! Clean residual min=-0.003523 max=0.003439 Jy/beam ! Clean residual mean=-0.000001 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.650439 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 194 components and 0.650439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349135Jy sigma=0.000786 ! Fit after self-cal, rms=0.349129Jy sigma=0.000786 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349129Jy sigma=0.000786 ! Fit after self-cal, rms=0.353932Jy sigma=0.000786 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.495 mas, bmaj=9.891 mas, bpa=78.24 degrees ! Estimated noise=1258.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.423659 Jy ! Component: 100 - total flux cleaned = 0.523747 Jy ! Component: 150 - total flux cleaned = 0.567305 Jy ! Component: 200 - total flux cleaned = 0.589843 Jy ! Total flux subtracted in 200 components = 0.589843 Jy ! Clean residual min=-0.009575 max=0.014676 Jy/beam ! Clean residual mean=0.000001 rms=0.002707 Jy/beam ! Combined flux in latest and established models = 0.589843 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.589843 Jy ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=11.1 mas, bpa=78.9 degrees ! Estimated noise=1030.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177981 Jy ! Component: 100 - total flux cleaned = 0.0277406 Jy ! Component: 150 - total flux cleaned = 0.0346853 Jy ! Component: 200 - total flux cleaned = 0.039253 Jy ! Total flux subtracted in 200 components = 0.039253 Jy ! Clean residual min=-0.004627 max=0.004545 Jy/beam ! Clean residual mean=-0.000001 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.629096 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.629096 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.659 mas, bmaj=13.42 mas, bpa=79.42 degrees ! Estimated noise=1184.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527875 Jy ! Component: 100 - total flux cleaned = 0.00850842 Jy ! Component: 150 - total flux cleaned = 0.0110156 Jy ! Component: 200 - total flux cleaned = 0.0129314 Jy ! Total flux subtracted in 200 components = 0.0129314 Jy ! Clean residual min=-0.003052 max=0.002465 Jy/beam ! Clean residual mean=-0.000003 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.642028 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142026 Jy ! Component: 100 - total flux cleaned = 0.00252502 Jy ! Component: 150 - total flux cleaned = 0.00338848 Jy ! Component: 200 - total flux cleaned = 0.00397316 Jy ! Total flux subtracted in 200 components = 0.00397316 Jy ! Clean residual min=-0.002878 max=0.002177 Jy/beam ! Clean residual mean=-0.000004 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.646001 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 128 components and 0.646001 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=11.1 mas, bpa=78.9 degrees ! Estimated noise=1030.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000581953 Jy ! Component: 100 - total flux cleaned = -2.93966e-05 Jy ! Component: 150 - total flux cleaned = 0.000461678 Jy ! Component: 200 - total flux cleaned = 0.000985918 Jy ! Total flux subtracted in 200 components = 0.000985918 Jy ! Clean residual min=-0.003937 max=0.003384 Jy/beam ! Clean residual mean=-0.000001 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.646987 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 0.646987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353931Jy sigma=0.000786 ! Fit after self-cal, rms=0.353896Jy sigma=0.000786 wmodel J0019+7327_S_2014_01_04_pus_map.mod ! Writing 147 model components to file: J0019+7327_S_2014_01_04_pus_map.mod wobs J0019+7327_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0019+7327_S_2014_01_04_pus_uvs.fits wwins J0019+7327_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0019+7327_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114493 Jy ! Component: 100 - total flux cleaned = -0.000581713 Jy ! Component: 150 - total flux cleaned = -0.000104467 Jy ! Component: 200 - total flux cleaned = 0.000149385 Jy ! Component: 250 - total flux cleaned = 0.000247101 Jy ! Component: 300 - total flux cleaned = 0.00024845 Jy ! Component: 350 - total flux cleaned = 0.000247127 Jy ! Component: 400 - total flux cleaned = 0.000290471 Jy ! Component: 450 - total flux cleaned = 0.000291181 Jy ! Component: 500 - total flux cleaned = 0.000415057 Jy ! Component: 550 - total flux cleaned = 0.000456032 Jy ! Component: 600 - total flux cleaned = 0.000612506 Jy ! Component: 650 - total flux cleaned = 0.000764311 Jy ! Component: 700 - total flux cleaned = 0.000875998 Jy ! Component: 750 - total flux cleaned = 0.000912958 Jy ! Component: 800 - total flux cleaned = 0.0010565 Jy ! Component: 850 - total flux cleaned = 0.00119685 Jy ! Component: 900 - total flux cleaned = 0.00126555 Jy ! Component: 950 - total flux cleaned = 0.00140075 Jy ! Component: 1000 - total flux cleaned = 0.00159926 Jy ! Component: 1050 - total flux cleaned = 0.00166484 Jy ! Component: 1100 - total flux cleaned = 0.00195272 Jy ! Component: 1150 - total flux cleaned = 0.00204711 Jy ! Component: 1200 - total flux cleaned = 0.00223185 Jy ! Component: 1250 - total flux cleaned = 0.00241339 Jy ! Component: 1300 - total flux cleaned = 0.00253283 Jy ! Component: 1350 - total flux cleaned = 0.00262141 Jy ! Component: 1400 - total flux cleaned = 0.00276569 Jy ! Component: 1450 - total flux cleaned = 0.0027941 Jy ! Component: 1500 - total flux cleaned = 0.00285108 Jy ! Component: 1550 - total flux cleaned = 0.00307224 Jy ! Component: 1600 - total flux cleaned = 0.00307199 Jy ! Component: 1650 - total flux cleaned = 0.00312545 Jy ! Component: 1700 - total flux cleaned = 0.00309898 Jy ! Component: 1750 - total flux cleaned = 0.00309922 Jy ! Component: 1800 - total flux cleaned = 0.00315099 Jy ! Component: 1850 - total flux cleaned = 0.0032523 Jy ! Component: 1900 - total flux cleaned = 0.00330186 Jy ! Component: 1950 - total flux cleaned = 0.00337614 Jy ! Component: 2000 - total flux cleaned = 0.00352344 Jy ! Component: 2050 - total flux cleaned = 0.00357164 Jy ! Component: 2100 - total flux cleaned = 0.00369117 Jy ! Component: 2150 - total flux cleaned = 0.00383349 Jy ! Component: 2200 - total flux cleaned = 0.00402069 Jy ! Component: 2250 - total flux cleaned = 0.00413646 Jy ! Component: 2300 - total flux cleaned = 0.00427403 Jy ! Component: 2350 - total flux cleaned = 0.0044326 Jy ! Component: 2400 - total flux cleaned = 0.00447738 Jy ! Component: 2450 - total flux cleaned = 0.00461042 Jy ! Component: 2500 - total flux cleaned = 0.00467624 Jy ! Component: 2550 - total flux cleaned = 0.00476343 Jy ! Component: 2600 - total flux cleaned = 0.00491429 Jy ! Component: 2650 - total flux cleaned = 0.00497801 Jy ! Component: 2700 - total flux cleaned = 0.00504137 Jy ! Component: 2750 - total flux cleaned = 0.00504148 Jy ! Component: 2800 - total flux cleaned = 0.00512483 Jy ! Component: 2850 - total flux cleaned = 0.00512496 Jy ! Component: 2900 - total flux cleaned = 0.00520684 Jy ! Component: 2950 - total flux cleaned = 0.0052269 Jy ! Component: 3000 - total flux cleaned = 0.00526688 Jy ! Component: 3050 - total flux cleaned = 0.00528679 Jy ! Component: 3100 - total flux cleaned = 0.00528661 Jy ! Component: 3150 - total flux cleaned = 0.0052866 Jy ! Component: 3200 - total flux cleaned = 0.00536462 Jy ! Component: 3250 - total flux cleaned = 0.00540314 Jy ! Component: 3300 - total flux cleaned = 0.00547981 Jy ! Component: 3350 - total flux cleaned = 0.00549891 Jy ! Component: 3400 - total flux cleaned = 0.00549908 Jy ! Component: 3450 - total flux cleaned = 0.00555552 Jy ! Component: 3500 - total flux cleaned = 0.00557421 Jy ! Component: 3550 - total flux cleaned = 0.00564849 Jy ! Component: 3600 - total flux cleaned = 0.00566703 Jy ! Component: 3650 - total flux cleaned = 0.00570374 Jy ! Component: 3700 - total flux cleaned = 0.00575825 Jy ! Component: 3750 - total flux cleaned = 0.00579452 Jy ! Component: 3800 - total flux cleaned = 0.0058487 Jy ! Component: 3850 - total flux cleaned = 0.00592048 Jy ! Component: 3900 - total flux cleaned = 0.00593829 Jy ! Component: 3950 - total flux cleaned = 0.0060093 Jy ! Component: 4000 - total flux cleaned = 0.00608004 Jy ! Component: 4050 - total flux cleaned = 0.0061505 Jy ! Total flux subtracted in 4096 components = 0.00623803 Jy ! Clean residual min=-0.001012 max=0.001293 Jy/beam ! Clean residual mean=0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.653225 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 412 components and 0.653225 Jy ![Exited script file: muppet] wmap "J0019+7327_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 11.1 at 78.9 degrees (North through East) ! Clean map min=-0.0027103 max=0.55817 Jy/beam ! Writing clean map to FITS file: J0019+7327_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.558174 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031012 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.166679 0.166679 0.333358 0.666717 1.33343 2.66687 5.33373 10.6675 21.3349 42.6699 85.3397 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.558 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 11.1 at 78.9 degrees (North through East) ! Clean map min=-0.0027103 max=0.55817 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0019+7327_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:12:10 2017