! Started logfile: J0016-2343_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:39:50 2016 obs J0016-2343_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0016-2343_S_2014_06_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.615611 visibilities/baseline/integration-bin. ! Found source: J0016-2343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 13408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0016-2343_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.909234Jy sigma=0.008799 ! Fit after self-cal, rms=0.884656Jy sigma=0.008577 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=12.41 mas, bpa=15.84 degrees ! Estimated noise=989.617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0877755 Jy ! Component: 100 - total flux cleaned = 0.110257 Jy ! Total flux subtracted in 100 components = 0.110257 Jy ! Clean residual min=-0.005730 max=0.009614 Jy/beam ! Clean residual mean=-0.000040 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 0.110257 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.110257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090459Jy sigma=0.000813 ! Fit after self-cal, rms=0.090472Jy sigma=0.000813 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.92 mas, bmaj=13.92 mas, bpa=13.88 degrees ! Estimated noise=640.076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165405 Jy ! Component: 100 - total flux cleaned = 0.0252877 Jy ! Component: 150 - total flux cleaned = 0.0304601 Jy ! Component: 200 - total flux cleaned = 0.033694 Jy ! Total flux subtracted in 200 components = 0.033694 Jy ! Clean residual min=-0.003278 max=0.004039 Jy/beam ! Clean residual mean=-0.000024 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.143951 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 82 components and 0.143951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087739Jy sigma=0.000780 ! Fit after self-cal, rms=0.087769Jy sigma=0.000780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00 KP 1.02 ! LA 1.14 MK 1.00* NL 1.00 OV 1.01 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.05 KP 0.98 ! LA 1.12 MK 1.00* NL 1.06 OV 0.99 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.08 KP 0.90 ! LA 0.88 MK 1.00* NL 1.00 OV 0.94 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.03 KP 0.88 ! LA 0.82 MK 1.00* NL 1.06 OV 1.03 ! PT 0.98 SC 1.05 ! ! ! Fit before self-cal, rms=0.087769Jy sigma=0.000780 ! Fit after self-cal, rms=0.086863Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.944 mas, bmaj=14.1 mas, bpa=13.86 degrees ! Estimated noise=635.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561732 Jy ! Component: 100 - total flux cleaned = -0.000514751 Jy ! Component: 150 - total flux cleaned = -0.000472336 Jy ! Component: 200 - total flux cleaned = -0.000432826 Jy ! Total flux subtracted in 200 components = -0.000432826 Jy ! Clean residual min=-0.002685 max=0.002939 Jy/beam ! Clean residual mean=-0.000014 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.143518 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.143518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086848Jy sigma=0.000768 ! Fit after self-cal, rms=0.086903Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086903Jy sigma=0.000768 ! Fit after self-cal, rms=0.087352Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=14.1 mas, bpa=13.86 degrees ! Estimated noise=635.969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00026646 Jy ! Component: 100 - total flux cleaned = -0.000286266 Jy ! Component: 150 - total flux cleaned = -0.000304075 Jy ! Component: 200 - total flux cleaned = -0.000287814 Jy ! Total flux subtracted in 200 components = -0.000287814 Jy ! Clean residual min=-0.002588 max=0.002827 Jy/beam ! Clean residual mean=-0.000010 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.14323 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 96 components and 0.14323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087343Jy sigma=0.000767 ! Fit after self-cal, rms=0.087352Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.07024e-05 Jy ! Component: 100 - total flux cleaned = 4.55763e-05 Jy ! Component: 150 - total flux cleaned = 7.50039e-05 Jy ! Component: 200 - total flux cleaned = 0.000103214 Jy ! Total flux subtracted in 200 components = 0.000103214 Jy ! Clean residual min=-0.002559 max=0.002841 Jy/beam ! Clean residual mean=-0.000010 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.143333 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.143333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087347Jy sigma=0.000767 ! Fit after self-cal, rms=0.087343Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087343Jy sigma=0.000767 ! Fit after self-cal, rms=0.087936Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.941 mas, bmaj=14.08 mas, bpa=13.86 degrees ! Estimated noise=635.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242831 Jy ! Component: 100 - total flux cleaned = -0.000242785 Jy ! Component: 150 - total flux cleaned = -0.000242717 Jy ! Component: 200 - total flux cleaned = -0.000258887 Jy ! Total flux subtracted in 200 components = -0.000258887 Jy ! Clean residual min=-0.002580 max=0.002821 Jy/beam ! Clean residual mean=-0.000007 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.143074 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 107 components and 0.143074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087925Jy sigma=0.000766 ! Fit after self-cal, rms=0.087936Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23041e-06 Jy ! Component: 100 - total flux cleaned = 9.74661e-07 Jy ! Component: 150 - total flux cleaned = -1.3335e-05 Jy ! Component: 200 - total flux cleaned = -1.36779e-05 Jy ! Total flux subtracted in 200 components = -1.36779e-05 Jy ! Clean residual min=-0.002570 max=0.002799 Jy/beam ! Clean residual mean=-0.000007 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.143061 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 108 components and 0.143061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087931Jy sigma=0.000766 ! Fit after self-cal, rms=0.087928Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087928Jy sigma=0.000766 ! Fit after self-cal, rms=0.088074Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.963 mas, bmaj=22.81 mas, bpa=0.8093 degrees ! Estimated noise=704.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222852 Jy ! Component: 100 - total flux cleaned = 0.000224182 Jy ! Component: 150 - total flux cleaned = 0.000224801 Jy ! Component: 200 - total flux cleaned = 0.000256931 Jy ! Total flux subtracted in 200 components = 0.000256931 Jy ! Clean residual min=-0.003228 max=0.003679 Jy/beam ! Clean residual mean=-0.000014 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.143318 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 111 components and 0.143318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088077Jy sigma=0.000766 ! Fit after self-cal, rms=0.088073Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.34882e-05 Jy ! Component: 100 - total flux cleaned = 8.3056e-05 Jy ! Component: 150 - total flux cleaned = 0.000112955 Jy ! Component: 200 - total flux cleaned = 0.000141747 Jy ! Total flux subtracted in 200 components = 0.000141747 Jy ! Clean residual min=-0.003217 max=0.003682 Jy/beam ! Clean residual mean=-0.000013 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.143459 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 112 components and 0.143459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088075Jy sigma=0.000766 ! Fit after self-cal, rms=0.088068Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=14.08 mas, bpa=13.93 degrees ! Estimated noise=634.795 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 14.08 at 13.93 degrees (North through East) ! Clean map min=-0.0025146 max=0.11389 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=12.47 mas, bpa=15.78 degrees ! Estimated noise=983.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.086958 Jy ! Component: 100 - total flux cleaned = 0.109228 Jy ! Component: 150 - total flux cleaned = 0.120094 Jy ! Component: 200 - total flux cleaned = 0.126688 Jy ! Total flux subtracted in 200 components = 0.126688 Jy ! Clean residual min=-0.003756 max=0.004239 Jy/beam ! Clean residual mean=-0.000018 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.126688 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 54 model components to the UV plane model. ! The established model now contains 54 components and 0.126688 Jy ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=14.08 mas, bpa=13.93 degrees ! Estimated noise=634.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00653958 Jy ! Component: 100 - total flux cleaned = 0.00998382 Jy ! Component: 150 - total flux cleaned = 0.0119908 Jy ! Component: 200 - total flux cleaned = 0.0132292 Jy ! Total flux subtracted in 200 components = 0.0132292 Jy ! Clean residual min=-0.002477 max=0.002746 Jy/beam ! Clean residual mean=-0.000012 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.139918 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 88 components and 0.139918 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.963 mas, bmaj=22.81 mas, bpa=0.8093 degrees ! Estimated noise=704.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149808 Jy ! Component: 100 - total flux cleaned = 0.00199124 Jy ! Component: 150 - total flux cleaned = 0.00211329 Jy ! Component: 200 - total flux cleaned = 0.00222687 Jy ! Total flux subtracted in 200 components = 0.00222687 Jy ! Clean residual min=-0.003262 max=0.003627 Jy/beam ! Clean residual mean=-0.000016 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.142145 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.45791e-05 Jy ! Component: 100 - total flux cleaned = 0.000165568 Jy ! Component: 150 - total flux cleaned = 0.000223561 Jy ! Component: 200 - total flux cleaned = 0.000298787 Jy ! Total flux subtracted in 200 components = 0.000298787 Jy ! Clean residual min=-0.003247 max=0.003638 Jy/beam ! Clean residual mean=-0.000016 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.142443 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.142443 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=14.08 mas, bpa=13.93 degrees ! Estimated noise=634.795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000369562 Jy ! Component: 100 - total flux cleaned = -0.000368462 Jy ! Component: 150 - total flux cleaned = -0.000388983 Jy ! Component: 200 - total flux cleaned = -0.000405829 Jy ! Total flux subtracted in 200 components = -0.000405829 Jy ! Clean residual min=-0.002554 max=0.002809 Jy/beam ! Clean residual mean=-0.000009 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.142037 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 107 components and 0.142037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088067Jy sigma=0.000766 ! Fit after self-cal, rms=0.088063Jy sigma=0.000766 wmodel J0016-2343_S_2014_06_09_pus_map.mod ! Writing 107 model components to file: J0016-2343_S_2014_06_09_pus_map.mod wobs J0016-2343_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0016-2343_S_2014_06_09_pus_uvs.fits wwins J0016-2343_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J0016-2343_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969244 Jy ! Component: 100 - total flux cleaned = 0.00146763 Jy ! Component: 150 - total flux cleaned = 0.00192454 Jy ! Component: 200 - total flux cleaned = 0.00223503 Jy ! Component: 250 - total flux cleaned = 0.00256133 Jy ! Component: 300 - total flux cleaned = 0.00269796 Jy ! Component: 350 - total flux cleaned = 0.00299461 Jy ! Component: 400 - total flux cleaned = 0.00324678 Jy ! Component: 450 - total flux cleaned = 0.00342923 Jy ! Component: 500 - total flux cleaned = 0.00345939 Jy ! Component: 550 - total flux cleaned = 0.00362974 Jy ! Component: 600 - total flux cleaned = 0.00365722 Jy ! Component: 650 - total flux cleaned = 0.00368284 Jy ! Component: 700 - total flux cleaned = 0.0036572 Jy ! Component: 750 - total flux cleaned = 0.003607 Jy ! Component: 800 - total flux cleaned = 0.00351152 Jy ! Component: 850 - total flux cleaned = 0.00341829 Jy ! Component: 900 - total flux cleaned = 0.00328218 Jy ! Component: 950 - total flux cleaned = 0.00321595 Jy ! Component: 1000 - total flux cleaned = 0.00308744 Jy ! Component: 1050 - total flux cleaned = 0.00302501 Jy ! Component: 1100 - total flux cleaned = 0.00298388 Jy ! Component: 1150 - total flux cleaned = 0.00298275 Jy ! Component: 1200 - total flux cleaned = 0.00286547 Jy ! Component: 1250 - total flux cleaned = 0.00292308 Jy ! Component: 1300 - total flux cleaned = 0.00292349 Jy ! Component: 1350 - total flux cleaned = 0.00297808 Jy ! Component: 1400 - total flux cleaned = 0.00294152 Jy ! Component: 1450 - total flux cleaned = 0.00294133 Jy ! Component: 1500 - total flux cleaned = 0.00288962 Jy ! Component: 1550 - total flux cleaned = 0.00285539 Jy ! Component: 1600 - total flux cleaned = 0.00290555 Jy ! Component: 1650 - total flux cleaned = 0.00290511 Jy ! Component: 1700 - total flux cleaned = 0.0029372 Jy ! Component: 1750 - total flux cleaned = 0.0029371 Jy ! Component: 1800 - total flux cleaned = 0.00295315 Jy ! Component: 1850 - total flux cleaned = 0.00296865 Jy ! Component: 1900 - total flux cleaned = 0.00301367 Jy ! Component: 1950 - total flux cleaned = 0.00298393 Jy ! Component: 2000 - total flux cleaned = 0.00301343 Jy ! Component: 2050 - total flux cleaned = 0.00302781 Jy ! Component: 2100 - total flux cleaned = 0.00304195 Jy ! Component: 2150 - total flux cleaned = 0.00302806 Jy ! Component: 2200 - total flux cleaned = 0.00308345 Jy ! Component: 2250 - total flux cleaned = 0.0030836 Jy ! Component: 2300 - total flux cleaned = 0.00304338 Jy ! Component: 2350 - total flux cleaned = 0.0030567 Jy ! Component: 2400 - total flux cleaned = 0.00306977 Jy ! Component: 2450 - total flux cleaned = 0.00303103 Jy ! Component: 2500 - total flux cleaned = 0.00304386 Jy ! Component: 2550 - total flux cleaned = 0.00305629 Jy ! Component: 2600 - total flux cleaned = 0.00308084 Jy ! Component: 2650 - total flux cleaned = 0.00308084 Jy ! Component: 2700 - total flux cleaned = 0.00309292 Jy ! Component: 2750 - total flux cleaned = 0.00311683 Jy ! Component: 2800 - total flux cleaned = 0.00315215 Jy ! Component: 2850 - total flux cleaned = 0.00315195 Jy ! Component: 2900 - total flux cleaned = 0.00312904 Jy ! Component: 2950 - total flux cleaned = 0.00320885 Jy ! Component: 3000 - total flux cleaned = 0.00319748 Jy ! Component: 3050 - total flux cleaned = 0.00321974 Jy ! Component: 3100 - total flux cleaned = 0.00325263 Jy ! Component: 3150 - total flux cleaned = 0.0032634 Jy ! Component: 3200 - total flux cleaned = 0.0032848 Jy ! Component: 3250 - total flux cleaned = 0.00328487 Jy ! Component: 3300 - total flux cleaned = 0.00334837 Jy ! Component: 3350 - total flux cleaned = 0.0033692 Jy ! Component: 3400 - total flux cleaned = 0.00339013 Jy ! Component: 3450 - total flux cleaned = 0.00341072 Jy ! Component: 3500 - total flux cleaned = 0.00344121 Jy ! Component: 3550 - total flux cleaned = 0.00343115 Jy ! Component: 3600 - total flux cleaned = 0.00348107 Jy ! Component: 3650 - total flux cleaned = 0.00347119 Jy ! Component: 3700 - total flux cleaned = 0.00350063 Jy ! Component: 3750 - total flux cleaned = 0.00352991 Jy ! Component: 3800 - total flux cleaned = 0.00353958 Jy ! Component: 3850 - total flux cleaned = 0.00352998 Jy ! Component: 3900 - total flux cleaned = 0.00354895 Jy ! Component: 3950 - total flux cleaned = 0.003596 Jy ! Component: 4000 - total flux cleaned = 0.00358657 Jy ! Component: 4050 - total flux cleaned = 0.00359594 Jy ! Total flux subtracted in 4096 components = 0.00357747 Jy ! Clean residual min=-0.000515 max=0.000493 Jy/beam ! Clean residual mean=0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.145615 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 424 components and 0.145615 Jy ![Exited script file: muppet] wmap "J0016-2343_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 14.08 at 13.93 degrees (North through East) ! Clean map min=-0.0014234 max=0.1153 Jy/beam ! Writing clean map to FITS file: J0016-2343_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115303 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178273 device "J0016-2343_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0016-2343_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.463838 0.463838 0.927676 1.85535 3.7107 7.42141 14.8428 29.6856 59.3713 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 14.08 at 13.93 degrees (North through East) ! Clean map min=-0.0014234 max=0.1153 Jy/beam quit ! Quitting program ! Log file J0016-2343_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:39:54 2016