! Started logfile: J0015+3216_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:11:52 2017 obs J0015+3216_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0015+3216_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.347222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0015+3216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0015+3216_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888625Jy sigma=0.014243 ! Fit after self-cal, rms=0.882533Jy sigma=0.014129 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=4.607 mas, bpa=-4.304 degrees ! Estimated noise=1283.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0906061 Jy ! Component: 100 - total flux cleaned = 0.110732 Jy ! Total flux subtracted in 100 components = 0.110732 Jy ! Clean residual min=-0.008006 max=0.008016 Jy/beam ! Clean residual mean=0.000005 rms=0.002168 Jy/beam ! Combined flux in latest and established models = 0.110732 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.110732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073740Jy sigma=0.000969 ! Fit after self-cal, rms=0.073720Jy sigma=0.000969 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=5.356 mas, bpa=-0.4698 degrees ! Estimated noise=864.386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102926 Jy ! Component: 100 - total flux cleaned = 0.015285 Jy ! Component: 150 - total flux cleaned = 0.0183771 Jy ! Component: 200 - total flux cleaned = 0.0205342 Jy ! Total flux subtracted in 200 components = 0.0205342 Jy ! Clean residual min=-0.007544 max=0.007888 Jy/beam ! Clean residual mean=0.000012 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.131267 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.131267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071996Jy sigma=0.000952 ! Fit after self-cal, rms=0.071966Jy sigma=0.000951 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.90 ! MK 0.97 NL 0.99 OV 1.06 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.90 ! MK 0.97 NL 1.02 OV 1.03 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.72 ! MK 1.10 NL 0.99 OV 0.96 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.78 ! MK 1.02 NL 1.09 OV 1.02 PT 0.96 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.071966Jy sigma=0.000951 ! Fit after self-cal, rms=0.068135Jy sigma=0.000928 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=5.41 mas, bpa=-1.067 degrees ! Estimated noise=860.248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136078 Jy ! Component: 100 - total flux cleaned = -0.00174877 Jy ! Component: 150 - total flux cleaned = -0.00174897 Jy ! Component: 200 - total flux cleaned = -0.00174649 Jy ! Total flux subtracted in 200 components = -0.00174649 Jy ! Clean residual min=-0.005328 max=0.006478 Jy/beam ! Clean residual mean=0.000004 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.12952 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.12952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067958Jy sigma=0.000926 ! Fit after self-cal, rms=0.067631Jy sigma=0.000926 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067631Jy sigma=0.000926 ! Fit after self-cal, rms=0.067241Jy sigma=0.000922 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=5.396 mas, bpa=-0.8479 degrees ! Estimated noise=856.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108923 Jy ! Component: 100 - total flux cleaned = -0.00124751 Jy ! Component: 150 - total flux cleaned = -0.00143877 Jy ! Component: 200 - total flux cleaned = -0.00157799 Jy ! Total flux subtracted in 200 components = -0.00157799 Jy ! Clean residual min=-0.005151 max=0.006337 Jy/beam ! Clean residual mean=0.000003 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.127942 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.127942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067173Jy sigma=0.000921 ! Fit after self-cal, rms=0.067137Jy sigma=0.000921 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144491 Jy ! Component: 100 - total flux cleaned = -0.000263753 Jy ! Component: 150 - total flux cleaned = -0.000351461 Jy ! Component: 200 - total flux cleaned = -0.000435475 Jy ! Total flux subtracted in 200 components = -0.000435475 Jy ! Clean residual min=-0.005061 max=0.006232 Jy/beam ! Clean residual mean=0.000003 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.127507 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.127507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067116Jy sigma=0.000921 ! Fit after self-cal, rms=0.067119Jy sigma=0.000921 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067119Jy sigma=0.000921 ! Fit after self-cal, rms=0.066650Jy sigma=0.000920 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=5.382 mas, bpa=-1.062 degrees ! Estimated noise=852.028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000710615 Jy ! Component: 100 - total flux cleaned = -0.000895479 Jy ! Component: 150 - total flux cleaned = -0.000984321 Jy ! Component: 200 - total flux cleaned = -0.0010245 Jy ! Total flux subtracted in 200 components = -0.0010245 Jy ! Clean residual min=-0.004941 max=0.006259 Jy/beam ! Clean residual mean=0.000003 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.126482 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.126482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066624Jy sigma=0.000920 ! Fit after self-cal, rms=0.066593Jy sigma=0.000920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140993 Jy ! Component: 100 - total flux cleaned = -0.0002306 Jy ! Component: 150 - total flux cleaned = -0.000312772 Jy ! Component: 200 - total flux cleaned = -0.000359442 Jy ! Total flux subtracted in 200 components = -0.000359442 Jy ! Clean residual min=-0.004902 max=0.006178 Jy/beam ! Clean residual mean=0.000003 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.126123 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.126123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066583Jy sigma=0.000920 ! Fit after self-cal, rms=0.066586Jy sigma=0.000920 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066586Jy sigma=0.000920 ! Fit after self-cal, rms=0.066304Jy sigma=0.000920 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.942 mas, bmaj=9.646 mas, bpa=15.77 degrees ! Estimated noise=971.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250793 Jy ! Component: 100 - total flux cleaned = 0.00296499 Jy ! Component: 150 - total flux cleaned = 0.00326108 Jy ! Component: 200 - total flux cleaned = 0.00344486 Jy ! Total flux subtracted in 200 components = 0.00344486 Jy ! Clean residual min=-0.007047 max=0.007516 Jy/beam ! Clean residual mean=0.000005 rms=0.002665 Jy/beam ! Combined flux in latest and established models = 0.129568 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.129568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066404Jy sigma=0.000920 ! Fit after self-cal, rms=0.066322Jy sigma=0.000920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807353 Jy ! Component: 100 - total flux cleaned = 0.000912799 Jy ! Component: 150 - total flux cleaned = 0.00100442 Jy ! Component: 200 - total flux cleaned = 0.00108681 Jy ! Total flux subtracted in 200 components = 0.00108681 Jy ! Clean residual min=-0.007119 max=0.007468 Jy/beam ! Clean residual mean=0.000005 rms=0.002618 Jy/beam ! Combined flux in latest and established models = 0.130654 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.130654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066390Jy sigma=0.000921 ! Fit after self-cal, rms=0.066354Jy sigma=0.000921 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=5.372 mas, bpa=-1.185 degrees ! Estimated noise=848.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 5.372 at -1.185 degrees (North through East) ! Clean map min=-0.0049803 max=0.11638 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=4.617 mas, bpa=-4.58 degrees ! Estimated noise=1266.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0892703 Jy ! Component: 100 - total flux cleaned = 0.110042 Jy ! Component: 150 - total flux cleaned = 0.117883 Jy ! Component: 200 - total flux cleaned = 0.120472 Jy ! Total flux subtracted in 200 components = 0.120472 Jy ! Clean residual min=-0.005984 max=0.006583 Jy/beam ! Clean residual mean=0.000001 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.120472 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.120472 Jy ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=5.372 mas, bpa=-1.185 degrees ! Estimated noise=848.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370933 Jy ! Component: 100 - total flux cleaned = 0.00441179 Jy ! Component: 150 - total flux cleaned = 0.00492782 Jy ! Component: 200 - total flux cleaned = 0.00527967 Jy ! Total flux subtracted in 200 components = 0.00527967 Jy ! Clean residual min=-0.004955 max=0.006313 Jy/beam ! Clean residual mean=0.000003 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.125752 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.125752 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.942 mas, bmaj=9.646 mas, bpa=15.77 degrees ! Estimated noise=971.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286935 Jy ! Component: 100 - total flux cleaned = 0.00414486 Jy ! Component: 150 - total flux cleaned = 0.00439572 Jy ! Component: 200 - total flux cleaned = 0.00458239 Jy ! Total flux subtracted in 200 components = 0.00458239 Jy ! Clean residual min=-0.007031 max=0.007501 Jy/beam ! Clean residual mean=0.000005 rms=0.002629 Jy/beam ! Combined flux in latest and established models = 0.130334 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170709 Jy ! Component: 100 - total flux cleaned = 0.000327305 Jy ! Component: 150 - total flux cleaned = 0.000443394 Jy ! Component: 200 - total flux cleaned = 0.000551541 Jy ! Total flux subtracted in 200 components = 0.000551541 Jy ! Clean residual min=-0.007087 max=0.007459 Jy/beam ! Clean residual mean=0.000005 rms=0.002605 Jy/beam ! Combined flux in latest and established models = 0.130886 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.130886 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=5.372 mas, bpa=-1.185 degrees ! Estimated noise=848.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0024873 Jy ! Component: 100 - total flux cleaned = -0.00310673 Jy ! Component: 150 - total flux cleaned = -0.00320191 Jy ! Component: 200 - total flux cleaned = -0.00332234 Jy ! Total flux subtracted in 200 components = -0.00332234 Jy ! Clean residual min=-0.004934 max=0.006301 Jy/beam ! Clean residual mean=0.000002 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.127564 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.127564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066258Jy sigma=0.000920 ! Fit after self-cal, rms=0.066299Jy sigma=0.000920 wmodel J0015+3216_S_2014_01_04_pus_map.mod ! Writing 44 model components to file: J0015+3216_S_2014_01_04_pus_map.mod wobs J0015+3216_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0015+3216_S_2014_01_04_pus_uvs.fits wwins J0015+3216_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0015+3216_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026836 Jy ! Component: 100 - total flux cleaned = 0.00357849 Jy ! Component: 150 - total flux cleaned = 0.00404858 Jy ! Component: 200 - total flux cleaned = 0.00455096 Jy ! Component: 250 - total flux cleaned = 0.00507709 Jy ! Component: 300 - total flux cleaned = 0.00556504 Jy ! Component: 350 - total flux cleaned = 0.00579195 Jy ! Component: 400 - total flux cleaned = 0.00579187 Jy ! Component: 450 - total flux cleaned = 0.00569161 Jy ! Component: 500 - total flux cleaned = 0.005595 Jy ! Component: 550 - total flux cleaned = 0.00541632 Jy ! Component: 600 - total flux cleaned = 0.00533035 Jy ! Component: 650 - total flux cleaned = 0.00520738 Jy ! Component: 700 - total flux cleaned = 0.00497088 Jy ! Component: 750 - total flux cleaned = 0.00478283 Jy ! Component: 800 - total flux cleaned = 0.00463981 Jy ! Component: 850 - total flux cleaned = 0.00443491 Jy ! Component: 900 - total flux cleaned = 0.00443529 Jy ! Component: 950 - total flux cleaned = 0.00434034 Jy ! Component: 1000 - total flux cleaned = 0.00427914 Jy ! Component: 1050 - total flux cleaned = 0.00427828 Jy ! Component: 1100 - total flux cleaned = 0.00419292 Jy ! Component: 1150 - total flux cleaned = 0.00416468 Jy ! Component: 1200 - total flux cleaned = 0.0040856 Jy ! Component: 1250 - total flux cleaned = 0.0041367 Jy ! Component: 1300 - total flux cleaned = 0.00413634 Jy ! Component: 1350 - total flux cleaned = 0.00420799 Jy ! Component: 1400 - total flux cleaned = 0.00432413 Jy ! Component: 1450 - total flux cleaned = 0.00436943 Jy ! Component: 1500 - total flux cleaned = 0.0044802 Jy ! Component: 1550 - total flux cleaned = 0.0045665 Jy ! Component: 1600 - total flux cleaned = 0.00458782 Jy ! Component: 1650 - total flux cleaned = 0.00462911 Jy ! Component: 1700 - total flux cleaned = 0.0046289 Jy ! Component: 1750 - total flux cleaned = 0.00464853 Jy ! Component: 1800 - total flux cleaned = 0.00466793 Jy ! Component: 1850 - total flux cleaned = 0.00464901 Jy ! Component: 1900 - total flux cleaned = 0.00468643 Jy ! Component: 1950 - total flux cleaned = 0.00466825 Jy ! Component: 2000 - total flux cleaned = 0.00463196 Jy ! Component: 2050 - total flux cleaned = 0.00461397 Jy ! Component: 2100 - total flux cleaned = 0.00457899 Jy ! Component: 2150 - total flux cleaned = 0.0045789 Jy ! Component: 2200 - total flux cleaned = 0.0045617 Jy ! Component: 2250 - total flux cleaned = 0.00457857 Jy ! Component: 2300 - total flux cleaned = 0.00462871 Jy ! Component: 2350 - total flux cleaned = 0.00462863 Jy ! Component: 2400 - total flux cleaned = 0.00461214 Jy ! Component: 2450 - total flux cleaned = 0.00462841 Jy ! Component: 2500 - total flux cleaned = 0.00461222 Jy ! Component: 2550 - total flux cleaned = 0.00453198 Jy ! Component: 2600 - total flux cleaned = 0.004516 Jy ! Component: 2650 - total flux cleaned = 0.00448418 Jy ! Component: 2700 - total flux cleaned = 0.00442072 Jy ! Component: 2750 - total flux cleaned = 0.00437312 Jy ! Component: 2800 - total flux cleaned = 0.00434155 Jy ! Component: 2850 - total flux cleaned = 0.00427839 Jy ! Component: 2900 - total flux cleaned = 0.00429423 Jy ! Component: 2950 - total flux cleaned = 0.00427841 Jy ! Component: 3000 - total flux cleaned = 0.00426275 Jy ! Component: 3050 - total flux cleaned = 0.00419974 Jy ! Component: 3100 - total flux cleaned = 0.00415246 Jy ! Component: 3150 - total flux cleaned = 0.00413665 Jy ! Component: 3200 - total flux cleaned = 0.00412073 Jy ! Component: 3250 - total flux cleaned = 0.00408897 Jy ! Component: 3300 - total flux cleaned = 0.00405712 Jy ! Component: 3350 - total flux cleaned = 0.00404116 Jy ! Component: 3400 - total flux cleaned = 0.0039931 Jy ! Component: 3450 - total flux cleaned = 0.00396091 Jy ! Component: 3500 - total flux cleaned = 0.00392846 Jy ! Component: 3550 - total flux cleaned = 0.00389586 Jy ! Component: 3600 - total flux cleaned = 0.00387964 Jy ! Component: 3650 - total flux cleaned = 0.00384683 Jy ! Component: 3700 - total flux cleaned = 0.00379726 Jy ! Component: 3750 - total flux cleaned = 0.00379717 Jy ! Component: 3800 - total flux cleaned = 0.00374707 Jy ! Component: 3850 - total flux cleaned = 0.00376386 Jy ! Component: 3900 - total flux cleaned = 0.00371307 Jy ! Component: 3950 - total flux cleaned = 0.00369602 Jy ! Component: 4000 - total flux cleaned = 0.0036616 Jy ! Component: 4050 - total flux cleaned = 0.00359233 Jy ! Total flux subtracted in 4096 components = 0.00354013 Jy ! Clean residual min=-0.001008 max=0.001050 Jy/beam ! Clean residual mean=-0.000014 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.131104 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 302 components and 0.131104 Jy ![Exited script file: muppet] wmap "J0015+3216_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 5.372 at -1.185 degrees (North through East) ! Clean map min=-0.002293 max=0.11664 Jy/beam ! Writing clean map to FITS file: J0015+3216_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116638 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246606 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.634285 0.634285 1.26857 2.53714 5.07428 10.1486 20.2971 40.5942 81.1885 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 5.372 at -1.185 degrees (North through East) ! Clean map min=-0.002293 max=0.11664 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0015+3216_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:11:56 2017