! Started logfile: J0014+6117_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:11:48 2017 obs J0014+6117_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0014+6117_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0014+6117 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0014+6117_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977654Jy sigma=0.013545 ! Fit after self-cal, rms=0.930296Jy sigma=0.012880 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=9.607 mas, bpa=75.68 degrees ! Estimated noise=1153.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560235 Jy ! Component: 100 - total flux cleaned = 0.0786794 Jy ! Total flux subtracted in 100 components = 0.0786794 Jy ! Clean residual min=-0.015545 max=0.014261 Jy/beam ! Clean residual mean=-0.000027 rms=0.005019 Jy/beam ! Combined flux in latest and established models = 0.0786794 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0786794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128281Jy sigma=0.001514 ! Fit after self-cal, rms=0.127832Jy sigma=0.001506 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=10.52 mas, bpa=76.61 degrees ! Estimated noise=638.062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253695 Jy ! Component: 100 - total flux cleaned = 0.0439167 Jy ! Component: 150 - total flux cleaned = 0.0581196 Jy ! Component: 200 - total flux cleaned = 0.0694364 Jy ! Total flux subtracted in 200 components = 0.0694364 Jy ! Clean residual min=-0.019550 max=0.019062 Jy/beam ! Clean residual mean=0.000009 rms=0.007427 Jy/beam ! Combined flux in latest and established models = 0.148116 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 70 components and 0.148116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119514Jy sigma=0.001417 ! Fit after self-cal, rms=0.118364Jy sigma=0.001408 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.00* KP 1.00* LA 0.75 ! MK 0.92 NL 1.41 OV 0.98 PT 0.62 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.77 FD 1.00* KP 1.00* LA 0.55 ! MK 0.89 NL 1.57 OV 1.52 PT 0.66 ! SC 1.28 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 1.00* KP 1.00* LA 0.59 ! MK 0.77 NL 1.59 OV 1.09 PT 0.57 ! SC 0.88 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.00* KP 1.00* LA 0.77 ! MK 0.75 NL 1.34 OV 1.07 PT 0.41 ! SC 0.86 ! ! ! Fit before self-cal, rms=0.118364Jy sigma=0.001408 ! Fit after self-cal, rms=0.104302Jy sigma=0.001273 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=9.929 mas, bpa=79.09 degrees ! Estimated noise=611.387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198003 Jy ! Component: 100 - total flux cleaned = 0.0017925 Jy ! Component: 150 - total flux cleaned = 0.00162898 Jy ! Component: 200 - total flux cleaned = 0.00140238 Jy ! Total flux subtracted in 200 components = 0.00140238 Jy ! Clean residual min=-0.014975 max=0.022065 Jy/beam ! Clean residual mean=-0.000014 rms=0.005562 Jy/beam ! Combined flux in latest and established models = 0.149518 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.149518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104102Jy sigma=0.001271 ! Fit after self-cal, rms=0.105863Jy sigma=0.001243 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105863Jy sigma=0.001243 ! Fit after self-cal, rms=0.143159Jy sigma=0.001135 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.976 mas, bmaj=9.597 mas, bpa=82.62 degrees ! Estimated noise=583.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290828 Jy ! Component: 100 - total flux cleaned = 0.0033078 Jy ! Component: 150 - total flux cleaned = 0.00330995 Jy ! Component: 200 - total flux cleaned = 0.00310099 Jy ! Total flux subtracted in 200 components = 0.00310099 Jy ! Clean residual min=-0.010820 max=0.013235 Jy/beam ! Clean residual mean=-0.000041 rms=0.003607 Jy/beam ! Combined flux in latest and established models = 0.152619 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.152619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142836Jy sigma=0.001132 ! Fit after self-cal, rms=0.146374Jy sigma=0.001118 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000674641 Jy ! Component: 100 - total flux cleaned = -0.00112547 Jy ! Component: 150 - total flux cleaned = -0.00127299 Jy ! Component: 200 - total flux cleaned = -0.00141187 Jy ! Total flux subtracted in 200 components = -0.00141187 Jy ! Clean residual min=-0.011084 max=0.011846 Jy/beam ! Clean residual mean=-0.000039 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 0.151207 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.151207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146303Jy sigma=0.001117 ! Fit after self-cal, rms=0.146275Jy sigma=0.001117 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146275Jy sigma=0.001117 ! Fit after self-cal, rms=0.172103Jy sigma=0.001112 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=9.499 mas, bpa=84.22 degrees ! Estimated noise=564.443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025404 Jy ! Component: 100 - total flux cleaned = 0.00346907 Jy ! Component: 150 - total flux cleaned = 0.00367513 Jy ! Component: 200 - total flux cleaned = 0.00378186 Jy ! Total flux subtracted in 200 components = 0.00378186 Jy ! Clean residual min=-0.010393 max=0.011301 Jy/beam ! Clean residual mean=-0.000038 rms=0.003390 Jy/beam ! Combined flux in latest and established models = 0.154989 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.154989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171883Jy sigma=0.001112 ! Fit after self-cal, rms=0.173629Jy sigma=0.001109 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000975572 Jy ! Component: 100 - total flux cleaned = -0.00113808 Jy ! Component: 150 - total flux cleaned = -0.00113949 Jy ! Component: 200 - total flux cleaned = -0.0011731 Jy ! Total flux subtracted in 200 components = -0.0011731 Jy ! Clean residual min=-0.009947 max=0.010876 Jy/beam ! Clean residual mean=-0.000038 rms=0.003310 Jy/beam ! Combined flux in latest and established models = 0.153816 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 108 components and 0.153816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173588Jy sigma=0.001109 ! Fit after self-cal, rms=0.173604Jy sigma=0.001108 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173604Jy sigma=0.001108 ! Fit after self-cal, rms=0.204656Jy sigma=0.001105 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.521 mas, bmaj=13.68 mas, bpa=77.74 degrees ! Estimated noise=764.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295313 Jy ! Component: 100 - total flux cleaned = 0.00368581 Jy ! Component: 150 - total flux cleaned = 0.00379384 Jy ! Component: 200 - total flux cleaned = 0.0037928 Jy ! Total flux subtracted in 200 components = 0.0037928 Jy ! Clean residual min=-0.018857 max=0.018949 Jy/beam ! Clean residual mean=-0.000074 rms=0.006313 Jy/beam ! Combined flux in latest and established models = 0.157609 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 109 components and 0.157609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204481Jy sigma=0.001106 ! Fit after self-cal, rms=0.206919Jy sigma=0.001103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122037 Jy ! Component: 100 - total flux cleaned = -0.00127176 Jy ! Component: 150 - total flux cleaned = -0.00131604 Jy ! Component: 200 - total flux cleaned = -0.00131611 Jy ! Total flux subtracted in 200 components = -0.00131611 Jy ! Clean residual min=-0.017693 max=0.017492 Jy/beam ! Clean residual mean=-0.000075 rms=0.006007 Jy/beam ! Combined flux in latest and established models = 0.156293 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 110 components and 0.156293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206889Jy sigma=0.001103 ! Fit after self-cal, rms=0.206921Jy sigma=0.001103 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=9.497 mas, bpa=84.99 degrees ! Estimated noise=565.782 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 9.497 at 84.99 degrees (North through East) ! Clean map min=-0.0093553 max=0.072034 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=8.367 mas, bpa=83.99 degrees ! Estimated noise=926.663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473841 Jy ! Component: 100 - total flux cleaned = 0.0730574 Jy ! Component: 150 - total flux cleaned = 0.0903945 Jy ! Component: 200 - total flux cleaned = 0.102894 Jy ! Total flux subtracted in 200 components = 0.102894 Jy ! Clean residual min=-0.010226 max=0.009232 Jy/beam ! Clean residual mean=-0.000032 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 0.102894 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.102894 Jy ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=9.497 mas, bpa=84.99 degrees ! Estimated noise=565.782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150811 Jy ! Component: 100 - total flux cleaned = 0.0255641 Jy ! Component: 150 - total flux cleaned = 0.0330538 Jy ! Component: 200 - total flux cleaned = 0.0384158 Jy ! Total flux subtracted in 200 components = 0.0384158 Jy ! Clean residual min=-0.010613 max=0.010377 Jy/beam ! Clean residual mean=-0.000029 rms=0.003338 Jy/beam ! Combined flux in latest and established models = 0.141309 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 72 components and 0.141309 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.521 mas, bmaj=13.68 mas, bpa=77.74 degrees ! Estimated noise=764.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688937 Jy ! Component: 100 - total flux cleaned = 0.0104213 Jy ! Component: 150 - total flux cleaned = 0.012127 Jy ! Component: 200 - total flux cleaned = 0.0124299 Jy ! Total flux subtracted in 200 components = 0.0124299 Jy ! Clean residual min=-0.018587 max=0.017638 Jy/beam ! Clean residual mean=-0.000073 rms=0.006113 Jy/beam ! Combined flux in latest and established models = 0.153739 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277086 Jy ! Component: 100 - total flux cleaned = 0.000332155 Jy ! Component: 150 - total flux cleaned = 0.000386149 Jy ! Component: 200 - total flux cleaned = 0.000436914 Jy ! Total flux subtracted in 200 components = 0.000436914 Jy ! Clean residual min=-0.018362 max=0.017545 Jy/beam ! Clean residual mean=-0.000073 rms=0.006085 Jy/beam ! Combined flux in latest and established models = 0.154176 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.154176 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=9.497 mas, bpa=84.99 degrees ! Estimated noise=565.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312507 Jy ! Component: 100 - total flux cleaned = 0.000558485 Jy ! Component: 150 - total flux cleaned = 0.000562441 Jy ! Component: 200 - total flux cleaned = 0.000562583 Jy ! Total flux subtracted in 200 components = 0.000562583 Jy ! Clean residual min=-0.009929 max=0.011058 Jy/beam ! Clean residual mean=-0.000035 rms=0.003157 Jy/beam ! Combined flux in latest and established models = 0.154739 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 101 components and 0.154739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206911Jy sigma=0.001105 ! Fit after self-cal, rms=0.207047Jy sigma=0.001104 wmodel J0014+6117_S_2014_01_04_pus_map.mod ! Writing 101 model components to file: J0014+6117_S_2014_01_04_pus_map.mod wobs J0014+6117_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0014+6117_S_2014_01_04_pus_uvs.fits wwins J0014+6117_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0014+6117_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224395 Jy ! Component: 100 - total flux cleaned = 0.00426899 Jy ! Component: 150 - total flux cleaned = 0.00537686 Jy ! Component: 200 - total flux cleaned = 0.006587 Jy ! Component: 250 - total flux cleaned = 0.00819425 Jy ! Component: 300 - total flux cleaned = 0.00960124 Jy ! Component: 350 - total flux cleaned = 0.0109559 Jy ! Component: 400 - total flux cleaned = 0.0120085 Jy ! Component: 450 - total flux cleaned = 0.0135409 Jy ! Component: 500 - total flux cleaned = 0.0146573 Jy ! Component: 550 - total flux cleaned = 0.0161117 Jy ! Component: 600 - total flux cleaned = 0.017648 Jy ! Component: 650 - total flux cleaned = 0.0191446 Jy ! Component: 700 - total flux cleaned = 0.0202718 Jy ! Component: 750 - total flux cleaned = 0.0215924 Jy ! Component: 800 - total flux cleaned = 0.022668 Jy ! Component: 850 - total flux cleaned = 0.0238248 Jy ! Component: 900 - total flux cleaned = 0.0248527 Jy ! Component: 950 - total flux cleaned = 0.026159 Jy ! Component: 1000 - total flux cleaned = 0.026945 Jy ! Component: 1050 - total flux cleaned = 0.028006 Jy ! Component: 1100 - total flux cleaned = 0.0291399 Jy ! Component: 1150 - total flux cleaned = 0.029883 Jy ! Component: 1200 - total flux cleaned = 0.0309787 Jy ! Component: 1250 - total flux cleaned = 0.0322319 Jy ! Component: 1300 - total flux cleaned = 0.0329348 Jy ! Component: 1350 - total flux cleaned = 0.033976 Jy ! Component: 1400 - total flux cleaned = 0.0349997 Jy ! Component: 1450 - total flux cleaned = 0.0355848 Jy ! Component: 1500 - total flux cleaned = 0.0361632 Jy ! Component: 1550 - total flux cleaned = 0.0368146 Jy ! Component: 1600 - total flux cleaned = 0.0375388 Jy ! Component: 1650 - total flux cleaned = 0.0380155 Jy ! Component: 1700 - total flux cleaned = 0.0387976 Jy ! Component: 1750 - total flux cleaned = 0.0390301 Jy ! Component: 1800 - total flux cleaned = 0.0396416 Jy ! Component: 1850 - total flux cleaned = 0.0400933 Jy ! Component: 1900 - total flux cleaned = 0.0406126 Jy ! Component: 1950 - total flux cleaned = 0.0409787 Jy ! Component: 2000 - total flux cleaned = 0.0412684 Jy ! Component: 2050 - total flux cleaned = 0.0412686 Jy ! Component: 2100 - total flux cleaned = 0.0414111 Jy ! Component: 2150 - total flux cleaned = 0.0419022 Jy ! Component: 2200 - total flux cleaned = 0.0419018 Jy ! Component: 2250 - total flux cleaned = 0.0419711 Jy ! Component: 2300 - total flux cleaned = 0.0422436 Jy ! Component: 2350 - total flux cleaned = 0.0425125 Jy ! Component: 2400 - total flux cleaned = 0.0427793 Jy ! Component: 2450 - total flux cleaned = 0.0429769 Jy ! Component: 2500 - total flux cleaned = 0.0431732 Jy ! Component: 2550 - total flux cleaned = 0.0433687 Jy ! Component: 2600 - total flux cleaned = 0.0436911 Jy ! Component: 2650 - total flux cleaned = 0.0440741 Jy ! Component: 2700 - total flux cleaned = 0.0442001 Jy ! Component: 2750 - total flux cleaned = 0.0443882 Jy ! Component: 2800 - total flux cleaned = 0.0446368 Jy ! Component: 2850 - total flux cleaned = 0.044884 Jy ! Component: 2900 - total flux cleaned = 0.0450681 Jy ! Component: 2950 - total flux cleaned = 0.0451299 Jy ! Component: 3000 - total flux cleaned = 0.0454325 Jy ! Component: 3050 - total flux cleaned = 0.0455529 Jy ! Component: 3100 - total flux cleaned = 0.0454933 Jy ! Component: 3150 - total flux cleaned = 0.0453743 Jy ! Component: 3200 - total flux cleaned = 0.0453152 Jy ! Component: 3250 - total flux cleaned = 0.0454926 Jy ! Component: 3300 - total flux cleaned = 0.0454338 Jy ! Component: 3350 - total flux cleaned = 0.0454334 Jy ! Component: 3400 - total flux cleaned = 0.0454334 Jy ! Component: 3450 - total flux cleaned = 0.0453751 Jy ! Component: 3500 - total flux cleaned = 0.045317 Jy ! Component: 3550 - total flux cleaned = 0.0453174 Jy ! Component: 3600 - total flux cleaned = 0.0453742 Jy ! Component: 3650 - total flux cleaned = 0.0452025 Jy ! Component: 3700 - total flux cleaned = 0.0451458 Jy ! Component: 3750 - total flux cleaned = 0.0450324 Jy ! Component: 3800 - total flux cleaned = 0.0449197 Jy ! Component: 3850 - total flux cleaned = 0.04492 Jy ! Component: 3900 - total flux cleaned = 0.0446949 Jy ! Component: 3950 - total flux cleaned = 0.0446389 Jy ! Component: 4000 - total flux cleaned = 0.0445267 Jy ! Component: 4050 - total flux cleaned = 0.0444708 Jy ! Total flux subtracted in 4096 components = 0.0444152 Jy ! Clean residual min=-0.002787 max=0.003035 Jy/beam ! Clean residual mean=-0.000003 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.199154 Jy keep ! Adding 372 model components to the UV plane model. ! The established model now contains 473 components and 0.199154 Jy ![Exited script file: muppet] wmap "J0014+6117_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 9.497 at 84.99 degrees (North through East) ! Clean map min=-0.013037 max=0.069676 Jy/beam ! Writing clean map to FITS file: J0014+6117_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0696756 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010494 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.51835 4.51835 9.0367 18.0734 36.1468 72.2936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 9.497 at 84.99 degrees (North through East) ! Clean map min=-0.013037 max=0.069676 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0014+6117_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:11:52 2017