! Started logfile: J0013-0423_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:11:39 2017 obs J0013-0423_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0013-0423_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0013-0423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0013-0423_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973537Jy sigma=0.011882 ! Fit after self-cal, rms=0.932741Jy sigma=0.011391 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=5.908 mas, bpa=2.334 degrees ! Estimated noise=1163.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539724 Jy ! Component: 100 - total flux cleaned = 0.0661705 Jy ! Total flux subtracted in 100 components = 0.0661705 Jy ! Clean residual min=-0.005051 max=0.004980 Jy/beam ! Clean residual mean=-0.000003 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.0661704 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0661704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100194Jy sigma=0.000901 ! Fit after self-cal, rms=0.100031Jy sigma=0.000899 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=6.643 mas, bpa=0.757 degrees ! Estimated noise=874.055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00585128 Jy ! Component: 100 - total flux cleaned = 0.00904725 Jy ! Component: 150 - total flux cleaned = 0.0109478 Jy ! Component: 200 - total flux cleaned = 0.0116163 Jy ! Total flux subtracted in 200 components = 0.0116163 Jy ! Clean residual min=-0.003755 max=0.003906 Jy/beam ! Clean residual mean=-0.000003 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.0777867 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 25 components and 0.0777867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099466Jy sigma=0.000897 ! Fit after self-cal, rms=0.099569Jy sigma=0.000896 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 1.03 ! MK 1.04 NL 1.09 OV 1.07 PT 1.02 ! SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 1.01 ! MK 1.01 NL 0.98 OV 1.17 PT 1.08 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* KP 1.00* LA 0.83 ! MK 0.99 NL 0.86 OV 0.94 PT 0.99 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.86 ! MK 1.03 NL 1.01 OV 1.01 PT 1.00 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.099569Jy sigma=0.000896 ! Fit after self-cal, rms=0.094262Jy sigma=0.000889 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=6.655 mas, bpa=0.7627 degrees ! Estimated noise=882.299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011318 Jy ! Component: 100 - total flux cleaned = 0.00143233 Jy ! Component: 150 - total flux cleaned = 0.00156448 Jy ! Component: 200 - total flux cleaned = 0.00164483 Jy ! Total flux subtracted in 200 components = 0.00164483 Jy ! Clean residual min=-0.003484 max=0.003444 Jy/beam ! Clean residual mean=-0.000003 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0794316 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0794316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094185Jy sigma=0.000888 ! Fit after self-cal, rms=0.094188Jy sigma=0.000888 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094188Jy sigma=0.000888 ! Fit after self-cal, rms=0.091403Jy sigma=0.000883 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=6.645 mas, bpa=0.9912 degrees ! Estimated noise=883.485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837925 Jy ! Component: 100 - total flux cleaned = 0.000916314 Jy ! Component: 150 - total flux cleaned = 0.00102559 Jy ! Component: 200 - total flux cleaned = 0.00112701 Jy ! Total flux subtracted in 200 components = 0.00112701 Jy ! Clean residual min=-0.003139 max=0.003334 Jy/beam ! Clean residual mean=-0.000007 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0805586 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0805586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091360Jy sigma=0.000882 ! Fit after self-cal, rms=0.091531Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.37726e-05 Jy ! Component: 100 - total flux cleaned = 1.85851e-05 Jy ! Component: 150 - total flux cleaned = 0.000120748 Jy ! Component: 200 - total flux cleaned = 0.000216078 Jy ! Total flux subtracted in 200 components = 0.000216078 Jy ! Clean residual min=-0.003319 max=0.003269 Jy/beam ! Clean residual mean=-0.000005 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.0807746 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0807746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091498Jy sigma=0.000881 ! Fit after self-cal, rms=0.091451Jy sigma=0.000881 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091451Jy sigma=0.000881 ! Fit after self-cal, rms=0.092069Jy sigma=0.000881 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=6.638 mas, bpa=1.208 degrees ! Estimated noise=885.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091832 Jy ! Component: 100 - total flux cleaned = 0.00101182 Jy ! Component: 150 - total flux cleaned = 0.00109861 Jy ! Component: 200 - total flux cleaned = 0.00117952 Jy ! Total flux subtracted in 200 components = 0.00117952 Jy ! Clean residual min=-0.003109 max=0.003398 Jy/beam ! Clean residual mean=-0.000006 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.0819542 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0819542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092042Jy sigma=0.000880 ! Fit after self-cal, rms=0.092152Jy sigma=0.000880 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.17591e-05 Jy ! Component: 100 - total flux cleaned = 0.000158669 Jy ! Component: 150 - total flux cleaned = 0.000241147 Jy ! Component: 200 - total flux cleaned = 0.000317844 Jy ! Total flux subtracted in 200 components = 0.000317844 Jy ! Clean residual min=-0.003138 max=0.003442 Jy/beam ! Clean residual mean=-0.000006 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.082272 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.082272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092132Jy sigma=0.000880 ! Fit after self-cal, rms=0.092164Jy sigma=0.000880 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092164Jy sigma=0.000880 ! Fit after self-cal, rms=0.092578Jy sigma=0.000880 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.374 mas, bmaj=12.73 mas, bpa=12.31 degrees ! Estimated noise=1085.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988902 Jy ! Component: 100 - total flux cleaned = 0.00129718 Jy ! Component: 150 - total flux cleaned = 0.00135963 Jy ! Component: 200 - total flux cleaned = 0.00141401 Jy ! Total flux subtracted in 200 components = 0.00141401 Jy ! Clean residual min=-0.003742 max=0.004385 Jy/beam ! Clean residual mean=-0.000012 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.083686 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 38 components and 0.083686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092568Jy sigma=0.000880 ! Fit after self-cal, rms=0.092634Jy sigma=0.000880 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.52742e-05 Jy ! Component: 100 - total flux cleaned = 0.000113822 Jy ! Component: 150 - total flux cleaned = 0.000161586 Jy ! Component: 200 - total flux cleaned = 0.000200779 Jy ! Total flux subtracted in 200 components = 0.000200779 Jy ! Clean residual min=-0.003721 max=0.004327 Jy/beam ! Clean residual mean=-0.000012 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.0838868 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.0838868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092634Jy sigma=0.000880 ! Fit after self-cal, rms=0.092634Jy sigma=0.000880 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=6.625 mas, bpa=1.406 degrees ! Estimated noise=887.053 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.134 x 6.625 at 1.406 degrees (North through East) ! Clean map min=-0.0029842 max=0.065984 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=5.903 mas, bpa=2.925 degrees ! Estimated noise=1171.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0540867 Jy ! Component: 100 - total flux cleaned = 0.0675194 Jy ! Component: 150 - total flux cleaned = 0.0745433 Jy ! Component: 200 - total flux cleaned = 0.078703 Jy ! Total flux subtracted in 200 components = 0.078703 Jy ! Clean residual min=-0.004383 max=0.004451 Jy/beam ! Clean residual mean=-0.000003 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.078703 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.078703 Jy ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=6.625 mas, bpa=1.406 degrees ! Estimated noise=887.053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233048 Jy ! Component: 100 - total flux cleaned = 0.00298313 Jy ! Component: 150 - total flux cleaned = 0.003508 Jy ! Component: 200 - total flux cleaned = 0.00383509 Jy ! Total flux subtracted in 200 components = 0.00383509 Jy ! Clean residual min=-0.003386 max=0.003429 Jy/beam ! Clean residual mean=-0.000006 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0825381 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.0825381 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.374 mas, bmaj=12.73 mas, bpa=12.31 degrees ! Estimated noise=1085.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000929845 Jy ! Component: 100 - total flux cleaned = 0.00116546 Jy ! Component: 150 - total flux cleaned = 0.00120983 Jy ! Component: 200 - total flux cleaned = 0.0012376 Jy ! Total flux subtracted in 200 components = 0.0012376 Jy ! Clean residual min=-0.003721 max=0.004263 Jy/beam ! Clean residual mean=-0.000012 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.0837757 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.50889e-05 Jy ! Component: 100 - total flux cleaned = 4.89326e-05 Jy ! Component: 150 - total flux cleaned = 6.38879e-05 Jy ! Component: 200 - total flux cleaned = 8.53832e-05 Jy ! Total flux subtracted in 200 components = 8.53832e-05 Jy ! Clean residual min=-0.003715 max=0.004290 Jy/beam ! Clean residual mean=-0.000012 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.083861 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.083861 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=6.625 mas, bpa=1.406 degrees ! Estimated noise=887.053 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000607036 Jy ! Component: 100 - total flux cleaned = -0.000562516 Jy ! Component: 150 - total flux cleaned = -0.000486594 Jy ! Component: 200 - total flux cleaned = -0.00041767 Jy ! Total flux subtracted in 200 components = -0.00041767 Jy ! Clean residual min=-0.003187 max=0.003452 Jy/beam ! Clean residual mean=-0.000006 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.0834434 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0834434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092657Jy sigma=0.000880 ! Fit after self-cal, rms=0.092611Jy sigma=0.000880 wmodel J0013-0423_S_2014_01_04_pus_map.mod ! Writing 43 model components to file: J0013-0423_S_2014_01_04_pus_map.mod wobs J0013-0423_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0013-0423_S_2014_01_04_pus_uvs.fits wwins J0013-0423_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0013-0423_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106415 Jy ! Component: 100 - total flux cleaned = 0.00162266 Jy ! Component: 150 - total flux cleaned = 0.00203923 Jy ! Component: 200 - total flux cleaned = 0.0021856 Jy ! Component: 250 - total flux cleaned = 0.00246665 Jy ! Component: 300 - total flux cleaned = 0.00282906 Jy ! Component: 350 - total flux cleaned = 0.00317876 Jy ! Component: 400 - total flux cleaned = 0.00360104 Jy ! Component: 450 - total flux cleaned = 0.0038468 Jy ! Component: 500 - total flux cleaned = 0.00416566 Jy ! Component: 550 - total flux cleaned = 0.00443515 Jy ! Component: 600 - total flux cleaned = 0.00458452 Jy ! Component: 650 - total flux cleaned = 0.00469344 Jy ! Component: 700 - total flux cleaned = 0.00476458 Jy ! Component: 750 - total flux cleaned = 0.00483342 Jy ! Component: 800 - total flux cleaned = 0.00490188 Jy ! Component: 850 - total flux cleaned = 0.0050667 Jy ! Component: 900 - total flux cleaned = 0.00522724 Jy ! Component: 950 - total flux cleaned = 0.00535284 Jy ! Component: 1000 - total flux cleaned = 0.00553774 Jy ! Component: 1050 - total flux cleaned = 0.00565868 Jy ! Component: 1100 - total flux cleaned = 0.00580767 Jy ! Component: 1150 - total flux cleaned = 0.00592441 Jy ! Component: 1200 - total flux cleaned = 0.00615349 Jy ! Component: 1250 - total flux cleaned = 0.00629371 Jy ! Component: 1300 - total flux cleaned = 0.00640348 Jy ! Component: 1350 - total flux cleaned = 0.00651209 Jy ! Component: 1400 - total flux cleaned = 0.00677816 Jy ! Component: 1450 - total flux cleaned = 0.00688211 Jy ! Component: 1500 - total flux cleaned = 0.00701013 Jy ! Component: 1550 - total flux cleaned = 0.00706028 Jy ! Component: 1600 - total flux cleaned = 0.00718465 Jy ! Component: 1650 - total flux cleaned = 0.00728254 Jy ! Component: 1700 - total flux cleaned = 0.00737835 Jy ! Component: 1750 - total flux cleaned = 0.00752027 Jy ! Component: 1800 - total flux cleaned = 0.0076371 Jy ! Component: 1850 - total flux cleaned = 0.007798 Jy ! Component: 1900 - total flux cleaned = 0.00791163 Jy ! Component: 1950 - total flux cleaned = 0.00804621 Jy ! Component: 2000 - total flux cleaned = 0.008113 Jy ! Component: 2050 - total flux cleaned = 0.00828776 Jy ! Component: 2100 - total flux cleaned = 0.00843876 Jy ! Component: 2150 - total flux cleaned = 0.00856641 Jy ! Component: 2200 - total flux cleaned = 0.00869295 Jy ! Component: 2250 - total flux cleaned = 0.00887998 Jy ! Component: 2300 - total flux cleaned = 0.00896174 Jy ! Component: 2350 - total flux cleaned = 0.00908306 Jy ! Component: 2400 - total flux cleaned = 0.00918343 Jy ! Component: 2450 - total flux cleaned = 0.00930211 Jy ! Component: 2500 - total flux cleaned = 0.00936078 Jy ! Component: 2550 - total flux cleaned = 0.00945775 Jy ! Component: 2600 - total flux cleaned = 0.0095731 Jy ! Component: 2650 - total flux cleaned = 0.00964909 Jy ! Component: 2700 - total flux cleaned = 0.0097431 Jy ! Component: 2750 - total flux cleaned = 0.00979899 Jy ! Component: 2800 - total flux cleaned = 0.00992797 Jy ! Component: 2850 - total flux cleaned = 0.0100187 Jy ! Component: 2900 - total flux cleaned = 0.0100727 Jy ! Component: 2950 - total flux cleaned = 0.0101799 Jy ! Component: 3000 - total flux cleaned = 0.0102682 Jy ! Component: 3050 - total flux cleaned = 0.0102857 Jy ! Component: 3100 - total flux cleaned = 0.0103898 Jy ! Component: 3150 - total flux cleaned = 0.0104069 Jy ! Component: 3200 - total flux cleaned = 0.0104924 Jy ! Component: 3250 - total flux cleaned = 0.0105261 Jy ! Component: 3300 - total flux cleaned = 0.0105933 Jy ! Component: 3350 - total flux cleaned = 0.0106597 Jy ! Component: 3400 - total flux cleaned = 0.010676 Jy ! Component: 3450 - total flux cleaned = 0.0106924 Jy ! Component: 3500 - total flux cleaned = 0.0107249 Jy ! Component: 3550 - total flux cleaned = 0.0107732 Jy ! Component: 3600 - total flux cleaned = 0.0108052 Jy ! Component: 3650 - total flux cleaned = 0.0108686 Jy ! Component: 3700 - total flux cleaned = 0.0108999 Jy ! Component: 3750 - total flux cleaned = 0.0108845 Jy ! Component: 3800 - total flux cleaned = 0.0109154 Jy ! Component: 3850 - total flux cleaned = 0.0109156 Jy ! Component: 3900 - total flux cleaned = 0.0109157 Jy ! Component: 3950 - total flux cleaned = 0.010931 Jy ! Component: 4000 - total flux cleaned = 0.010931 Jy ! Component: 4050 - total flux cleaned = 0.0110055 Jy ! Total flux subtracted in 4096 components = 0.0110055 Jy ! Clean residual min=-0.000905 max=0.000875 Jy/beam ! Clean residual mean=-0.000003 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0944488 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 302 components and 0.0944488 Jy ![Exited script file: muppet] wmap "J0013-0423_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.134 x 6.625 at 1.406 degrees (North through East) ! Clean map min=-0.0019718 max=0.066208 Jy/beam ! Writing clean map to FITS file: J0013-0423_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0662077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249016 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12834 1.12834 2.25668 4.51336 9.02672 18.0534 36.1069 72.2138 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.134 x 6.625 at 1.406 degrees (North through East) ! Clean map min=-0.0019718 max=0.066208 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0013-0423_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:11:43 2017