! Started logfile: J0012+3353_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:11:34 2017 obs J0012+3353_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0012+3353_S_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.500859 visibilities/baseline/integration-bin. ! Found source: J0012+3353 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0012+3353_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961686Jy sigma=0.015366 ! Fit after self-cal, rms=0.948645Jy sigma=0.015159 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=5.014 mas, bpa=-5.247 degrees ! Estimated noise=805.587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418602 Jy ! Component: 100 - total flux cleaned = 0.051223 Jy ! Total flux subtracted in 100 components = 0.051223 Jy ! Clean residual min=-0.004162 max=0.003837 Jy/beam ! Clean residual mean=0.000002 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.051223 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.051223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066676Jy sigma=0.000874 ! Fit after self-cal, rms=0.066575Jy sigma=0.000872 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=5.847 mas, bpa=-3.19 degrees ! Estimated noise=563.027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323141 Jy ! Component: 100 - total flux cleaned = 0.00331466 Jy ! Component: 150 - total flux cleaned = 0.00322924 Jy ! Component: 200 - total flux cleaned = 0.00311751 Jy ! Total flux subtracted in 200 components = 0.00311751 Jy ! Clean residual min=-0.002510 max=0.002723 Jy/beam ! Clean residual mean=0.000003 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0543405 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.0543405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066415Jy sigma=0.000869 ! Fit after self-cal, rms=0.066515Jy sigma=0.000869 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* KP 1.00* LA 1.07 ! MK 0.97 NL 1.02 OV 1.10 PT 1.08 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.95 ! MK 0.94 NL 1.08 OV 1.07 PT 1.04 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* KP 1.00* LA 0.85 ! MK 1.03 NL 1.03 OV 1.01 PT 1.04 ! SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 0.91 ! MK 1.03 NL 1.11 OV 1.11 PT 1.11 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.066515Jy sigma=0.000869 ! Fit after self-cal, rms=0.065041Jy sigma=0.000864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.86 mas, bmaj=5.741 mas, bpa=-1.233 degrees ! Estimated noise=557.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103277 Jy ! Component: 100 - total flux cleaned = 0.00135691 Jy ! Component: 150 - total flux cleaned = 0.00135801 Jy ! Component: 200 - total flux cleaned = 0.00138301 Jy ! Total flux subtracted in 200 components = 0.00138301 Jy ! Clean residual min=-0.002048 max=0.002083 Jy/beam ! Clean residual mean=0.000003 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0557235 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.0557235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064974Jy sigma=0.000864 ! Fit after self-cal, rms=0.065361Jy sigma=0.000863 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065361Jy sigma=0.000863 ! Fit after self-cal, rms=0.065671Jy sigma=0.000861 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.824 mas, bmaj=5.701 mas, bpa=-1.805 degrees ! Estimated noise=559.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000762123 Jy ! Component: 100 - total flux cleaned = 0.000842994 Jy ! Component: 150 - total flux cleaned = 0.000889909 Jy ! Component: 200 - total flux cleaned = 0.000977824 Jy ! Total flux subtracted in 200 components = 0.000977824 Jy ! Clean residual min=-0.001757 max=0.002051 Jy/beam ! Clean residual mean=0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0567014 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.0567014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065636Jy sigma=0.000861 ! Fit after self-cal, rms=0.065838Jy sigma=0.000861 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125246 Jy ! Component: 100 - total flux cleaned = 0.00157704 Jy ! Component: 150 - total flux cleaned = 0.00194947 Jy ! Component: 200 - total flux cleaned = 0.00218368 Jy ! Total flux subtracted in 200 components = 0.00218368 Jy ! Clean residual min=-0.001488 max=0.001649 Jy/beam ! Clean residual mean=0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.058885 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.058885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065766Jy sigma=0.000860 ! Fit after self-cal, rms=0.065842Jy sigma=0.000860 ! Inverting map ! Added new window around map position (7, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526527 Jy ! Component: 100 - total flux cleaned = 0.00104728 Jy ! Component: 150 - total flux cleaned = 0.00143234 Jy ! Component: 200 - total flux cleaned = 0.00153921 Jy ! Total flux subtracted in 200 components = 0.00153921 Jy ! Clean residual min=-0.001456 max=0.001592 Jy/beam ! Clean residual mean=0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0604243 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0604243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065780Jy sigma=0.000859 ! Fit after self-cal, rms=0.065886Jy sigma=0.000859 ! Inverting map ! Added new window around map position (-124.5, 75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013642 Jy ! Component: 100 - total flux cleaned = 0.00171661 Jy ! Component: 150 - total flux cleaned = 0.00194917 Jy ! Component: 200 - total flux cleaned = 0.00209911 Jy ! Total flux subtracted in 200 components = 0.00209911 Jy ! Clean residual min=-0.001384 max=0.001566 Jy/beam ! Clean residual mean=0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0625234 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.0625234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065830Jy sigma=0.000858 ! Fit after self-cal, rms=0.065879Jy sigma=0.000858 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065879Jy sigma=0.000858 ! Fit after self-cal, rms=0.066295Jy sigma=0.000858 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=5.709 mas, bpa=-1.232 degrees ! Estimated noise=560.212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809854 Jy ! Component: 100 - total flux cleaned = 0.00107372 Jy ! Component: 150 - total flux cleaned = 0.00111938 Jy ! Component: 200 - total flux cleaned = 0.00113961 Jy ! Total flux subtracted in 200 components = 0.00113961 Jy ! Clean residual min=-0.001375 max=0.001510 Jy/beam ! Clean residual mean=0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.063663 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.063663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066267Jy sigma=0.000858 ! Fit after self-cal, rms=0.066353Jy sigma=0.000858 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (116.5, -74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071796 Jy ! Component: 100 - total flux cleaned = 0.000678753 Jy ! Component: 150 - total flux cleaned = 0.00105382 Jy ! Component: 200 - total flux cleaned = 0.00129033 Jy ! Total flux subtracted in 200 components = 0.00129033 Jy ! Clean residual min=-0.001223 max=0.001332 Jy/beam ! Clean residual mean=0.000000 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.0649533 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.0649533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066301Jy sigma=0.000857 ! Fit after self-cal, rms=0.066301Jy sigma=0.000857 ! Inverting map ! Added new window around map position (-73.5, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000995108 Jy ! Component: 100 - total flux cleaned = 0.00112404 Jy ! Component: 150 - total flux cleaned = 0.001293 Jy ! Component: 200 - total flux cleaned = 0.00142379 Jy ! Total flux subtracted in 200 components = 0.00142379 Jy ! Clean residual min=-0.001170 max=0.001168 Jy/beam ! Clean residual mean=0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0663771 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 121 components and 0.0663771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066256Jy sigma=0.000857 ! Fit after self-cal, rms=0.066265Jy sigma=0.000857 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066265Jy sigma=0.000857 ! Fit after self-cal, rms=0.066358Jy sigma=0.000857 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.489 mas, bmaj=9.784 mas, bpa=17.36 degrees ! Estimated noise=650.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127003 Jy ! Component: 100 - total flux cleaned = -8.23045e-05 Jy ! Component: 150 - total flux cleaned = -2.16757e-05 Jy ! Component: 200 - total flux cleaned = -2.13175e-05 Jy ! Total flux subtracted in 200 components = -2.13175e-05 Jy ! Clean residual min=-0.001060 max=0.001158 Jy/beam ! Clean residual mean=0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.0663557 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 150 components and 0.0663557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066347Jy sigma=0.000856 ! Fit after self-cal, rms=0.066362Jy sigma=0.000856 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.30661e-05 Jy ! Component: 100 - total flux cleaned = -4.47245e-05 Jy ! Component: 150 - total flux cleaned = 5.7814e-05 Jy ! Component: 200 - total flux cleaned = 0.000126981 Jy ! Total flux subtracted in 200 components = 0.000126981 Jy ! Clean residual min=-0.001028 max=0.001132 Jy/beam ! Clean residual mean=0.000001 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0664827 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 0.0664827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066356Jy sigma=0.000856 ! Fit after self-cal, rms=0.066350Jy sigma=0.000856 ! Inverting map ! Added new window around map position (102.5, 90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746308 Jy ! Component: 100 - total flux cleaned = 0.00109879 Jy ! Component: 150 - total flux cleaned = 0.00139851 Jy ! Component: 200 - total flux cleaned = 0.00160155 Jy ! Total flux subtracted in 200 components = 0.00160155 Jy ! Clean residual min=-0.001059 max=0.000869 Jy/beam ! Clean residual mean=0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0680843 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 212 components and 0.0680843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066332Jy sigma=0.000856 ! Fit after self-cal, rms=0.066304Jy sigma=0.000856 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=5.718 mas, bpa=-1.105 degrees ! Estimated noise=558.799 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 5.718 at -1.105 degrees (North through East) ! Clean map min=-0.0016457 max=0.054405 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=4.894 mas, bpa=-3.249 degrees ! Estimated noise=792.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0404285 Jy ! Component: 100 - total flux cleaned = 0.049897 Jy ! Component: 150 - total flux cleaned = 0.053031 Jy ! Component: 200 - total flux cleaned = 0.055684 Jy ! Total flux subtracted in 200 components = 0.055684 Jy ! Clean residual min=-0.003172 max=0.002848 Jy/beam ! Clean residual mean=0.000002 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.055684 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.055684 Jy ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=5.718 mas, bpa=-1.105 degrees ! Estimated noise=558.799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028103 Jy ! Component: 100 - total flux cleaned = 0.00491839 Jy ! Component: 150 - total flux cleaned = 0.00651198 Jy ! Component: 200 - total flux cleaned = 0.00770683 Jy ! Total flux subtracted in 200 components = 0.00770683 Jy ! Clean residual min=-0.001809 max=0.001527 Jy/beam ! Clean residual mean=0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0633908 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.0633908 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.489 mas, bmaj=9.784 mas, bpa=17.36 degrees ! Estimated noise=650.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005789 Jy ! Component: 100 - total flux cleaned = 0.00094907 Jy ! Component: 150 - total flux cleaned = 0.00138614 Jy ! Component: 200 - total flux cleaned = 0.00183299 Jy ! Total flux subtracted in 200 components = 0.00183299 Jy ! Clean residual min=-0.001286 max=0.000990 Jy/beam ! Clean residual mean=0.000003 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0652238 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396593 Jy ! Component: 100 - total flux cleaned = 0.000730963 Jy ! Component: 150 - total flux cleaned = 0.00101163 Jy ! Component: 200 - total flux cleaned = 0.00130175 Jy ! Total flux subtracted in 200 components = 0.00130175 Jy ! Clean residual min=-0.001155 max=0.000953 Jy/beam ! Clean residual mean=0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.0665255 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 110 components and 0.0665256 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=5.718 mas, bpa=-1.105 degrees ! Estimated noise=558.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234751 Jy ! Component: 100 - total flux cleaned = 0.000388875 Jy ! Component: 150 - total flux cleaned = 0.000473981 Jy ! Component: 200 - total flux cleaned = 0.000759241 Jy ! Total flux subtracted in 200 components = 0.000759241 Jy ! Clean residual min=-0.001251 max=0.001355 Jy/beam ! Clean residual mean=0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0672848 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.0672848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066372Jy sigma=0.000857 ! Fit after self-cal, rms=0.066316Jy sigma=0.000857 wmodel J0012+3353_S_2014_01_04_pus_map.mod ! Writing 129 model components to file: J0012+3353_S_2014_01_04_pus_map.mod wobs J0012+3353_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0012+3353_S_2014_01_04_pus_uvs.fits wwins J0012+3353_S_2014_01_04_pus_map.win ! wwins: Wrote 7 windows to J0012+3353_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197158 Jy ! Component: 100 - total flux cleaned = -0.000255946 Jy ! Component: 150 - total flux cleaned = -0.000463091 Jy ! Component: 200 - total flux cleaned = -0.000571611 Jy ! Component: 250 - total flux cleaned = -0.000641945 Jy ! Component: 300 - total flux cleaned = -0.000709651 Jy ! Component: 350 - total flux cleaned = -0.000725825 Jy ! Component: 400 - total flux cleaned = -0.000757867 Jy ! Component: 450 - total flux cleaned = -0.000804623 Jy ! Component: 500 - total flux cleaned = -0.000865522 Jy ! Component: 550 - total flux cleaned = -0.00090993 Jy ! Component: 600 - total flux cleaned = -0.000953178 Jy ! Component: 650 - total flux cleaned = -0.000967635 Jy ! Component: 700 - total flux cleaned = -0.000995198 Jy ! Component: 750 - total flux cleaned = -0.000995363 Jy ! Component: 800 - total flux cleaned = -0.000969509 Jy ! Component: 850 - total flux cleaned = -0.000943839 Jy ! Component: 900 - total flux cleaned = -0.000943812 Jy ! Component: 950 - total flux cleaned = -0.000868836 Jy ! Component: 1000 - total flux cleaned = -0.000819734 Jy ! Component: 1050 - total flux cleaned = -0.000759395 Jy ! Component: 1100 - total flux cleaned = -0.000735673 Jy ! Component: 1150 - total flux cleaned = -0.000700477 Jy ! Component: 1200 - total flux cleaned = -0.000608272 Jy ! Component: 1250 - total flux cleaned = -0.000562961 Jy ! Component: 1300 - total flux cleaned = -0.000529555 Jy ! Component: 1350 - total flux cleaned = -0.000474463 Jy ! Component: 1400 - total flux cleaned = -0.000409283 Jy ! Component: 1450 - total flux cleaned = -0.000366352 Jy ! Component: 1500 - total flux cleaned = -0.000313404 Jy ! Component: 1550 - total flux cleaned = -0.000260959 Jy ! Component: 1600 - total flux cleaned = -0.000188574 Jy ! Component: 1650 - total flux cleaned = -0.000147828 Jy ! Component: 1700 - total flux cleaned = -0.00011742 Jy ! Component: 1750 - total flux cleaned = -8.72884e-05 Jy ! Component: 1800 - total flux cleaned = -1.78963e-05 Jy ! Component: 1850 - total flux cleaned = -7.9748e-06 Jy ! Component: 1900 - total flux cleaned = 6.95659e-05 Jy ! Component: 1950 - total flux cleaned = 8.86083e-05 Jy ! Component: 2000 - total flux cleaned = 0.000126441 Jy ! Component: 2050 - total flux cleaned = 0.000164016 Jy ! Component: 2100 - total flux cleaned = 0.000219641 Jy ! Component: 2150 - total flux cleaned = 0.000247083 Jy ! Component: 2200 - total flux cleaned = 0.000265395 Jy ! Component: 2250 - total flux cleaned = 0.000328571 Jy ! Component: 2300 - total flux cleaned = 0.000390944 Jy ! Component: 2350 - total flux cleaned = 0.00040848 Jy ! Component: 2400 - total flux cleaned = 0.00046115 Jy ! Component: 2450 - total flux cleaned = 0.000530631 Jy ! Component: 2500 - total flux cleaned = 0.000565018 Jy ! Component: 2550 - total flux cleaned = 0.000590699 Jy ! Component: 2600 - total flux cleaned = 0.000624748 Jy ! Component: 2650 - total flux cleaned = 0.000658437 Jy ! Component: 2700 - total flux cleaned = 0.000691849 Jy ! Component: 2750 - total flux cleaned = 0.000716798 Jy ! Component: 2800 - total flux cleaned = 0.000741525 Jy ! Component: 2850 - total flux cleaned = 0.000774199 Jy ! Component: 2900 - total flux cleaned = 0.000798626 Jy ! Component: 2950 - total flux cleaned = 0.000822912 Jy ! Component: 3000 - total flux cleaned = 0.000862996 Jy ! Component: 3050 - total flux cleaned = 0.000910761 Jy ! Component: 3100 - total flux cleaned = 0.000926571 Jy ! Component: 3150 - total flux cleaned = 0.000934458 Jy ! Component: 3200 - total flux cleaned = 0.000981502 Jy ! Component: 3250 - total flux cleaned = 0.00100492 Jy ! Component: 3300 - total flux cleaned = 0.00105925 Jy ! Component: 3350 - total flux cleaned = 0.00105159 Jy ! Component: 3400 - total flux cleaned = 0.00109762 Jy ! Component: 3450 - total flux cleaned = 0.00112047 Jy ! Component: 3500 - total flux cleaned = 0.00113569 Jy ! Component: 3550 - total flux cleaned = 0.00113569 Jy ! Component: 3600 - total flux cleaned = 0.00118096 Jy ! Component: 3650 - total flux cleaned = 0.00118099 Jy ! Component: 3700 - total flux cleaned = 0.0012333 Jy ! Component: 3750 - total flux cleaned = 0.00125561 Jy ! Component: 3800 - total flux cleaned = 0.00130748 Jy ! Component: 3850 - total flux cleaned = 0.00135183 Jy ! Component: 3900 - total flux cleaned = 0.00136657 Jy ! Component: 3950 - total flux cleaned = 0.00141799 Jy ! Component: 4000 - total flux cleaned = 0.00143996 Jy ! Component: 4050 - total flux cleaned = 0.00145458 Jy ! Total flux subtracted in 4096 components = 0.00149097 Jy ! Clean residual min=-0.000438 max=0.000441 Jy/beam ! Clean residual mean=0.000002 rms=0.000121 Jy/beam ! Combined flux in latest and established models = 0.0687758 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 364 components and 0.0687758 Jy ![Exited script file: muppet] wmap "J0012+3353_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 5.718 at -1.105 degrees (North through East) ! Clean map min=-0.001309 max=0.053464 Jy/beam ! Writing clean map to FITS file: J0012+3353_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0534639 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000117782 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.660906 0.660906 1.32181 2.64363 5.28725 10.5745 21.149 42.298 84.596 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 5.718 at -1.105 degrees (North through East) ! Clean map min=-0.001309 max=0.053464 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0012+3353_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:11:39 2017