! Started logfile: J0007+5706_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:11:28 2017 obs J0007+5706_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0007+5706_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0007+5706 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0007+5706_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.870540Jy sigma=0.011953 ! Fit after self-cal, rms=0.721480Jy sigma=0.010599 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=3.87 mas, bpa=-87 degrees ! Estimated noise=1101.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214258 Jy ! Component: 100 - total flux cleaned = 0.26098 Jy ! Total flux subtracted in 100 components = 0.26098 Jy ! Clean residual min=-0.009719 max=0.014535 Jy/beam ! Clean residual mean=0.000044 rms=0.002808 Jy/beam ! Combined flux in latest and established models = 0.26098 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.26098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084169Jy sigma=0.001014 ! Fit after self-cal, rms=0.084152Jy sigma=0.001014 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.692 mas, bmaj=4.851 mas, bpa=-77.57 degrees ! Estimated noise=548.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135176 Jy ! Component: 100 - total flux cleaned = 0.0186655 Jy ! Component: 150 - total flux cleaned = 0.0217428 Jy ! Component: 200 - total flux cleaned = 0.0237167 Jy ! Total flux subtracted in 200 components = 0.0237167 Jy ! Clean residual min=-0.007997 max=0.009433 Jy/beam ! Clean residual mean=0.000086 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.284697 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.284697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080940Jy sigma=0.001005 ! Fit after self-cal, rms=0.080949Jy sigma=0.001005 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 1.03 ! MK 1.01 NL 0.97 OV 0.94 PT 1.02 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.99 ! MK 1.01 NL 1.01 OV 1.00 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.80 ! MK 1.04 NL 0.98 OV 0.92 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.88 ! MK 1.04 NL 1.06 OV 0.98 PT 0.97 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.080949Jy sigma=0.001005 ! Fit after self-cal, rms=0.072178Jy sigma=0.000898 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=4.835 mas, bpa=-78.22 degrees ! Estimated noise=549.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.19548e-05 Jy ! Component: 100 - total flux cleaned = -9.09224e-05 Jy ! Component: 150 - total flux cleaned = -0.000202172 Jy ! Component: 200 - total flux cleaned = -0.0003077 Jy ! Total flux subtracted in 200 components = -0.0003077 Jy ! Clean residual min=-0.002390 max=0.002490 Jy/beam ! Clean residual mean=0.000006 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.284389 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.284389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072123Jy sigma=0.000897 ! Fit after self-cal, rms=0.071780Jy sigma=0.000897 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071780Jy sigma=0.000897 ! Fit after self-cal, rms=0.071683Jy sigma=0.000895 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=4.829 mas, bpa=-78.17 degrees ! Estimated noise=549.437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160652 Jy ! Component: 100 - total flux cleaned = 6.66289e-05 Jy ! Component: 150 - total flux cleaned = -2.01234e-05 Jy ! Component: 200 - total flux cleaned = -0.000102305 Jy ! Total flux subtracted in 200 components = -0.000102305 Jy ! Clean residual min=-0.001879 max=0.002215 Jy/beam ! Clean residual mean=0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.284287 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.284287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071647Jy sigma=0.000895 ! Fit after self-cal, rms=0.071645Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.5, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129082 Jy ! Component: 100 - total flux cleaned = 0.00120679 Jy ! Component: 150 - total flux cleaned = 0.00114689 Jy ! Component: 200 - total flux cleaned = 0.00101092 Jy ! Total flux subtracted in 200 components = 0.00101092 Jy ! Clean residual min=-0.001775 max=0.001669 Jy/beam ! Clean residual mean=0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.285298 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.285298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071580Jy sigma=0.000894 ! Fit after self-cal, rms=0.071580Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071580Jy sigma=0.000894 ! Fit after self-cal, rms=0.071597Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.693 mas, bmaj=4.827 mas, bpa=-78.14 degrees ! Estimated noise=549.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451339 Jy ! Component: 100 - total flux cleaned = 0.000451454 Jy ! Component: 150 - total flux cleaned = 0.000362485 Jy ! Component: 200 - total flux cleaned = 0.000298873 Jy ! Total flux subtracted in 200 components = 0.000298873 Jy ! Clean residual min=-0.001743 max=0.001592 Jy/beam ! Clean residual mean=0.000005 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.285597 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.285597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071576Jy sigma=0.000894 ! Fit after self-cal, rms=0.071580Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.16292e-05 Jy ! Component: 100 - total flux cleaned = -0.000140422 Jy ! Component: 150 - total flux cleaned = -0.000215606 Jy ! Component: 200 - total flux cleaned = -0.000304139 Jy ! Total flux subtracted in 200 components = -0.000304139 Jy ! Clean residual min=-0.001764 max=0.001567 Jy/beam ! Clean residual mean=0.000005 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.285293 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.285293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071566Jy sigma=0.000894 ! Fit after self-cal, rms=0.071567Jy sigma=0.000894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071567Jy sigma=0.000894 ! Fit after self-cal, rms=0.071578Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=8.72 mas, bpa=-86.8 degrees ! Estimated noise=635.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.05075e-06 Jy ! Component: 100 - total flux cleaned = -6.73093e-05 Jy ! Component: 150 - total flux cleaned = -6.79393e-05 Jy ! Component: 200 - total flux cleaned = -6.71919e-05 Jy ! Total flux subtracted in 200 components = -6.71919e-05 Jy ! Clean residual min=-0.001780 max=0.001366 Jy/beam ! Clean residual mean=0.000009 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.285225 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.285225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071579Jy sigma=0.000894 ! Fit after self-cal, rms=0.071579Jy sigma=0.000894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.01614e-05 Jy ! Component: 100 - total flux cleaned = -0.00010502 Jy ! Component: 150 - total flux cleaned = -0.000153744 Jy ! Component: 200 - total flux cleaned = -0.000185946 Jy ! Total flux subtracted in 200 components = -0.000185946 Jy ! Clean residual min=-0.001760 max=0.001375 Jy/beam ! Clean residual mean=0.000008 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.28504 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.28504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071580Jy sigma=0.000894 ! Fit after self-cal, rms=0.071579Jy sigma=0.000894 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=4.826 mas, bpa=-78.13 degrees ! Estimated noise=549.448 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.691 x 4.826 at -78.13 degrees (North through East) ! Clean map min=-0.0016031 max=0.27534 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=3.842 mas, bpa=-88.54 degrees ! Estimated noise=1103.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214744 Jy ! Component: 100 - total flux cleaned = 0.261572 Jy ! Component: 150 - total flux cleaned = 0.273524 Jy ! Component: 200 - total flux cleaned = 0.279411 Jy ! Total flux subtracted in 200 components = 0.279411 Jy ! Clean residual min=-0.005162 max=0.004788 Jy/beam ! Clean residual mean=0.000007 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.279411 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.279411 Jy ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=4.826 mas, bpa=-78.13 degrees ! Estimated noise=549.448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319195 Jy ! Component: 100 - total flux cleaned = 0.00446547 Jy ! Component: 150 - total flux cleaned = 0.00448418 Jy ! Component: 200 - total flux cleaned = 0.00433384 Jy ! Total flux subtracted in 200 components = 0.00433384 Jy ! Clean residual min=-0.001922 max=0.001416 Jy/beam ! Clean residual mean=0.000010 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.283745 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.283745 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=8.72 mas, bpa=-86.8 degrees ! Estimated noise=635.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321234 Jy ! Component: 100 - total flux cleaned = 0.00025258 Jy ! Component: 150 - total flux cleaned = 0.000162001 Jy ! Component: 200 - total flux cleaned = 8.72438e-05 Jy ! Total flux subtracted in 200 components = 8.72438e-05 Jy ! Clean residual min=-0.001891 max=0.001380 Jy/beam ! Clean residual mean=0.000013 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.283832 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.47535e-05 Jy ! Component: 100 - total flux cleaned = -0.000126886 Jy ! Component: 150 - total flux cleaned = -0.000162633 Jy ! Component: 200 - total flux cleaned = -0.000162722 Jy ! Total flux subtracted in 200 components = -0.000162722 Jy ! Clean residual min=-0.001848 max=0.001374 Jy/beam ! Clean residual mean=0.000011 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.283669 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 64 components and 0.283669 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=4.826 mas, bpa=-78.13 degrees ! Estimated noise=549.448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011812 Jy ! Component: 100 - total flux cleaned = -0.000185779 Jy ! Component: 150 - total flux cleaned = -0.000246869 Jy ! Component: 200 - total flux cleaned = -0.000246789 Jy ! Total flux subtracted in 200 components = -0.000246789 Jy ! Clean residual min=-0.001810 max=0.001483 Jy/beam ! Clean residual mean=0.000006 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.283422 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 84 components and 0.283422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071558Jy sigma=0.000894 ! Fit after self-cal, rms=0.071565Jy sigma=0.000894 wmodel J0007+5706_S_2014_01_04_pus_map.mod ! Writing 84 model components to file: J0007+5706_S_2014_01_04_pus_map.mod wobs J0007+5706_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0007+5706_S_2014_01_04_pus_uvs.fits wwins J0007+5706_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0007+5706_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000795761 Jy ! Component: 100 - total flux cleaned = -0.00120863 Jy ! Component: 150 - total flux cleaned = -0.00150623 Jy ! Component: 200 - total flux cleaned = -0.00160078 Jy ! Component: 250 - total flux cleaned = -0.00157819 Jy ! Component: 300 - total flux cleaned = -0.00153572 Jy ! Component: 350 - total flux cleaned = -0.00141112 Jy ! Component: 400 - total flux cleaned = -0.00127037 Jy ! Component: 450 - total flux cleaned = -0.00115292 Jy ! Component: 500 - total flux cleaned = -0.00105828 Jy ! Component: 550 - total flux cleaned = -0.00102142 Jy ! Component: 600 - total flux cleaned = -0.000948898 Jy ! Component: 650 - total flux cleaned = -0.000878423 Jy ! Component: 700 - total flux cleaned = -0.000792182 Jy ! Component: 750 - total flux cleaned = -0.000774886 Jy ! Component: 800 - total flux cleaned = -0.000724868 Jy ! Component: 850 - total flux cleaned = -0.00067569 Jy ! Component: 900 - total flux cleaned = -0.000611203 Jy ! Component: 950 - total flux cleaned = -0.000595391 Jy ! Component: 1000 - total flux cleaned = -0.000564407 Jy ! Component: 1050 - total flux cleaned = -0.000549238 Jy ! Component: 1100 - total flux cleaned = -0.00051867 Jy ! Component: 1150 - total flux cleaned = -0.000474192 Jy ! Component: 1200 - total flux cleaned = -0.000430281 Jy ! Component: 1250 - total flux cleaned = -0.000415806 Jy ! Component: 1300 - total flux cleaned = -0.000444189 Jy ! Component: 1350 - total flux cleaned = -0.000430128 Jy ! Component: 1400 - total flux cleaned = -0.000416123 Jy ! Component: 1450 - total flux cleaned = -0.000402437 Jy ! Component: 1500 - total flux cleaned = -0.000429376 Jy ! Component: 1550 - total flux cleaned = -0.000456196 Jy ! Component: 1600 - total flux cleaned = -0.000482416 Jy ! Component: 1650 - total flux cleaned = -0.000482211 Jy ! Component: 1700 - total flux cleaned = -0.000546406 Jy ! Component: 1750 - total flux cleaned = -0.00049539 Jy ! Component: 1800 - total flux cleaned = -0.000533161 Jy ! Component: 1850 - total flux cleaned = -0.000533275 Jy ! Component: 1900 - total flux cleaned = -0.000545665 Jy ! Component: 1950 - total flux cleaned = -0.000545848 Jy ! Component: 2000 - total flux cleaned = -0.000533966 Jy ! Component: 2050 - total flux cleaned = -0.000546173 Jy ! Component: 2100 - total flux cleaned = -0.000557947 Jy ! Component: 2150 - total flux cleaned = -0.000499407 Jy ! Component: 2200 - total flux cleaned = -0.00054577 Jy ! Component: 2250 - total flux cleaned = -0.000511349 Jy ! Component: 2300 - total flux cleaned = -0.000500198 Jy ! Component: 2350 - total flux cleaned = -0.000477772 Jy ! Component: 2400 - total flux cleaned = -0.00046655 Jy ! Component: 2450 - total flux cleaned = -0.000466599 Jy ! Component: 2500 - total flux cleaned = -0.000433647 Jy ! Component: 2550 - total flux cleaned = -0.000368425 Jy ! Component: 2600 - total flux cleaned = -0.000379243 Jy ! Component: 2650 - total flux cleaned = -0.000379193 Jy ! Component: 2700 - total flux cleaned = -0.000326149 Jy ! Component: 2750 - total flux cleaned = -0.000315614 Jy ! Component: 2800 - total flux cleaned = -0.000284261 Jy ! Component: 2850 - total flux cleaned = -0.000273896 Jy ! Component: 2900 - total flux cleaned = -0.000263545 Jy ! Component: 2950 - total flux cleaned = -0.000242968 Jy ! Component: 3000 - total flux cleaned = -0.000171646 Jy ! Component: 3050 - total flux cleaned = -0.000161561 Jy ! Component: 3100 - total flux cleaned = -0.000121292 Jy ! Component: 3150 - total flux cleaned = -7.14599e-05 Jy ! Component: 3200 - total flux cleaned = -6.15936e-05 Jy ! Component: 3250 - total flux cleaned = -2.63983e-06 Jy ! Component: 3300 - total flux cleaned = 6.57769e-05 Jy ! Component: 3350 - total flux cleaned = 9.48953e-05 Jy ! Component: 3400 - total flux cleaned = 0.000123781 Jy ! Component: 3450 - total flux cleaned = 0.000200557 Jy ! Component: 3500 - total flux cleaned = 0.000238666 Jy ! Component: 3550 - total flux cleaned = 0.000267071 Jy ! Component: 3600 - total flux cleaned = 0.000285973 Jy ! Component: 3650 - total flux cleaned = 0.000332846 Jy ! Component: 3700 - total flux cleaned = 0.000360884 Jy ! Component: 3750 - total flux cleaned = 0.000398057 Jy ! Component: 3800 - total flux cleaned = 0.00047199 Jy ! Component: 3850 - total flux cleaned = 0.000527126 Jy ! Component: 3900 - total flux cleaned = 0.000582093 Jy ! Component: 3950 - total flux cleaned = 0.000664069 Jy ! Component: 4000 - total flux cleaned = 0.000727589 Jy ! Component: 4050 - total flux cleaned = 0.000790958 Jy ! Total flux subtracted in 4096 components = 0.000854038 Jy ! Clean residual min=-0.000570 max=0.000546 Jy/beam ! Clean residual mean=-0.000000 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.284277 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 308 components and 0.284277 Jy ![Exited script file: muppet] wmap "J0007+5706_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.691 x 4.826 at -78.13 degrees (North through East) ! Clean map min=-0.0011846 max=0.27635 Jy/beam ! Writing clean map to FITS file: J0007+5706_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276349 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148105 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.160781 0.160781 0.321561 0.643123 1.28625 2.57249 5.14498 10.29 20.5799 41.1598 82.3197 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.691 x 4.826 at -78.13 degrees (North through East) ! Clean map min=-0.0011846 max=0.27635 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0007+5706_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:11:34 2017