! Started logfile: J0006+3422_S_2015_01_23_pus_uvs.log on Mon Jan 2 17:59:56 2017 obs J0006+3422_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0006+3422_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784699 visibilities/baseline/integration-bin. ! Found source: J0006+3422 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0006+3422_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956042Jy sigma=0.011756 ! Fit after self-cal, rms=0.934453Jy sigma=0.011635 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=5.102 mas, bpa=-4.163 degrees ! Estimated noise=739.666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535855 Jy ! Component: 100 - total flux cleaned = 0.0653641 Jy ! Total flux subtracted in 100 components = 0.0653641 Jy ! Clean residual min=-0.003547 max=0.004009 Jy/beam ! Clean residual mean=-0.000002 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.0653641 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0653641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133642Jy sigma=0.000779 ! Fit after self-cal, rms=0.133615Jy sigma=0.000779 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=5.971 mas, bpa=-2.942 degrees ! Estimated noise=459.581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416808 Jy ! Component: 100 - total flux cleaned = 0.00593194 Jy ! Component: 150 - total flux cleaned = 0.00690416 Jy ! Component: 200 - total flux cleaned = 0.00748473 Jy ! Total flux subtracted in 200 components = 0.00748473 Jy ! Clean residual min=-0.003089 max=0.003258 Jy/beam ! Clean residual mean=-0.000004 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0728489 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.0728489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133259Jy sigma=0.000779 ! Fit after self-cal, rms=0.133270Jy sigma=0.000779 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.55 HN 0.88 KP 1.10 ! LA 0.97 MK 0.96 NL 1.01 OV 1.00 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.65 HN 1.02 KP 1.07 ! LA 1.01 MK 0.96 NL 1.14 OV 1.03 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.66 HN 1.04 KP 0.88 ! LA 0.78 MK 1.01 NL 1.55 OV 0.93 ! PT 1.01 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.54 HN 0.96 KP 0.83 ! LA 0.83 MK 0.98 NL 1.13 OV 0.97 ! PT 1.03 SC 1.01 ! ! ! Fit before self-cal, rms=0.133270Jy sigma=0.000779 ! Fit after self-cal, rms=0.091891Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=6.011 mas, bpa=-3.44 degrees ! Estimated noise=461.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.47069e-05 Jy ! Component: 100 - total flux cleaned = -7.51904e-05 Jy ! Component: 150 - total flux cleaned = -7.622e-05 Jy ! Component: 200 - total flux cleaned = -8.80924e-05 Jy ! Total flux subtracted in 200 components = -8.80924e-05 Jy ! Clean residual min=-0.001851 max=0.002116 Jy/beam ! Clean residual mean=0.000000 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0727608 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0727608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091884Jy sigma=0.000766 ! Fit after self-cal, rms=0.091774Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091774Jy sigma=0.000766 ! Fit after self-cal, rms=0.090077Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=6.001 mas, bpa=-3.469 degrees ! Estimated noise=459.851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270336 Jy ! Component: 100 - total flux cleaned = -0.000280217 Jy ! Component: 150 - total flux cleaned = -0.000280512 Jy ! Component: 200 - total flux cleaned = -0.000289064 Jy ! Total flux subtracted in 200 components = -0.000289064 Jy ! Clean residual min=-0.001197 max=0.001291 Jy/beam ! Clean residual mean=-0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0724717 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0724717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090075Jy sigma=0.000763 ! Fit after self-cal, rms=0.090096Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.00149e-05 Jy ! Component: 100 - total flux cleaned = -2.75334e-05 Jy ! Component: 150 - total flux cleaned = -3.4109e-05 Jy ! Component: 200 - total flux cleaned = -4.08299e-05 Jy ! Total flux subtracted in 200 components = -4.08299e-05 Jy ! Clean residual min=-0.001237 max=0.001232 Jy/beam ! Clean residual mean=-0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0724309 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0724309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090095Jy sigma=0.000762 ! Fit after self-cal, rms=0.090095Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090095Jy sigma=0.000762 ! Fit after self-cal, rms=0.089966Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=6.004 mas, bpa=-3.367 degrees ! Estimated noise=460.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182083 Jy ! Component: 100 - total flux cleaned = -0.000199097 Jy ! Component: 150 - total flux cleaned = -0.000214567 Jy ! Component: 200 - total flux cleaned = -0.000228217 Jy ! Total flux subtracted in 200 components = -0.000228217 Jy ! Clean residual min=-0.001200 max=0.001244 Jy/beam ! Clean residual mean=-0.000000 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.0722027 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0722027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089964Jy sigma=0.000762 ! Fit after self-cal, rms=0.089966Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.06104e-05 Jy ! Component: 100 - total flux cleaned = -2.65652e-05 Jy ! Component: 150 - total flux cleaned = -3.23757e-05 Jy ! Component: 200 - total flux cleaned = -3.78353e-05 Jy ! Total flux subtracted in 200 components = -3.78353e-05 Jy ! Clean residual min=-0.001203 max=0.001244 Jy/beam ! Clean residual mean=-0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.0721649 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.0721649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089965Jy sigma=0.000762 ! Fit after self-cal, rms=0.089964Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089964Jy sigma=0.000762 ! Fit after self-cal, rms=0.089909Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.533 mas, bmaj=9.622 mas, bpa=-2.838 degrees ! Estimated noise=574.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148099 Jy ! Component: 100 - total flux cleaned = -0.000170766 Jy ! Component: 150 - total flux cleaned = -0.000192063 Jy ! Component: 200 - total flux cleaned = -0.00020376 Jy ! Total flux subtracted in 200 components = -0.00020376 Jy ! Clean residual min=-0.001411 max=0.001323 Jy/beam ! Clean residual mean=-0.000000 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0719611 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.0719611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089908Jy sigma=0.000762 ! Fit after self-cal, rms=0.089911Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.12334e-06 Jy ! Component: 100 - total flux cleaned = -6.83834e-06 Jy ! Component: 150 - total flux cleaned = -2.995e-06 Jy ! Component: 200 - total flux cleaned = -3.17381e-06 Jy ! Total flux subtracted in 200 components = -3.17381e-06 Jy ! Clean residual min=-0.001408 max=0.001323 Jy/beam ! Clean residual mean=-0.000000 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0719579 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.0719579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089911Jy sigma=0.000762 ! Fit after self-cal, rms=0.089911Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=6.007 mas, bpa=-3.294 degrees ! Estimated noise=460.266 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.441 x 6.007 at -3.294 degrees (North through East) ! Clean map min=-0.0011581 max=0.069328 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=5.122 mas, bpa=-4.614 degrees ! Estimated noise=744.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538935 Jy ! Component: 100 - total flux cleaned = 0.0657481 Jy ! Component: 150 - total flux cleaned = 0.069226 Jy ! Component: 200 - total flux cleaned = 0.070713 Jy ! Total flux subtracted in 200 components = 0.070713 Jy ! Clean residual min=-0.002285 max=0.002153 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.070713 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.070713 Jy ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=6.007 mas, bpa=-3.294 degrees ! Estimated noise=460.266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467973 Jy ! Component: 100 - total flux cleaned = 0.000613979 Jy ! Component: 150 - total flux cleaned = 0.000729666 Jy ! Component: 200 - total flux cleaned = 0.000802196 Jy ! Total flux subtracted in 200 components = 0.000802196 Jy ! Clean residual min=-0.001226 max=0.001239 Jy/beam ! Clean residual mean=-0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.0715152 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.0715152 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.533 mas, bmaj=9.622 mas, bpa=-2.838 degrees ! Estimated noise=574.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002792 Jy ! Component: 100 - total flux cleaned = 0.000304845 Jy ! Component: 150 - total flux cleaned = 0.000324179 Jy ! Component: 200 - total flux cleaned = 0.000327862 Jy ! Total flux subtracted in 200 components = 0.000327862 Jy ! Clean residual min=-0.001408 max=0.001321 Jy/beam ! Clean residual mean=-0.000000 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0718431 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.33913e-06 Jy ! Component: 100 - total flux cleaned = 6.01994e-06 Jy ! Component: 150 - total flux cleaned = 8.18619e-06 Jy ! Component: 200 - total flux cleaned = 9.86456e-06 Jy ! Total flux subtracted in 200 components = 9.86456e-06 Jy ! Clean residual min=-0.001411 max=0.001324 Jy/beam ! Clean residual mean=-0.000000 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0718529 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0718529 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=6.007 mas, bpa=-3.294 degrees ! Estimated noise=460.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190656 Jy ! Component: 100 - total flux cleaned = -0.000190216 Jy ! Component: 150 - total flux cleaned = -0.000189553 Jy ! Component: 200 - total flux cleaned = -0.000189156 Jy ! Total flux subtracted in 200 components = -0.000189156 Jy ! Clean residual min=-0.001215 max=0.001254 Jy/beam ! Clean residual mean=-0.000001 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0716638 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.0716638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089909Jy sigma=0.000762 ! Fit after self-cal, rms=0.089901Jy sigma=0.000762 wmodel J0006+3422_S_2015_01_23_pus_map.mod ! Writing 43 model components to file: J0006+3422_S_2015_01_23_pus_map.mod wobs J0006+3422_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0006+3422_S_2015_01_23_pus_uvs.fits wwins J0006+3422_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0006+3422_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.13696e-05 Jy ! Component: 100 - total flux cleaned = 1.32089e-06 Jy ! Component: 150 - total flux cleaned = 1.33118e-06 Jy ! Component: 200 - total flux cleaned = -1.8907e-05 Jy ! Component: 250 - total flux cleaned = -3.81904e-05 Jy ! Component: 300 - total flux cleaned = -3.79938e-05 Jy ! Component: 350 - total flux cleaned = -0.000111203 Jy ! Component: 400 - total flux cleaned = -0.0001654 Jy ! Component: 450 - total flux cleaned = -0.000236427 Jy ! Component: 500 - total flux cleaned = -0.000323351 Jy ! Component: 550 - total flux cleaned = -0.000356913 Jy ! Component: 600 - total flux cleaned = -0.000356821 Jy ! Component: 650 - total flux cleaned = -0.000340419 Jy ! Component: 700 - total flux cleaned = -0.000388917 Jy ! Component: 750 - total flux cleaned = -0.00045239 Jy ! Component: 800 - total flux cleaned = -0.000468122 Jy ! Component: 850 - total flux cleaned = -0.000529885 Jy ! Component: 900 - total flux cleaned = -0.000575659 Jy ! Component: 950 - total flux cleaned = -0.000620658 Jy ! Component: 1000 - total flux cleaned = -0.000665071 Jy ! Component: 1050 - total flux cleaned = -0.000723614 Jy ! Component: 1100 - total flux cleaned = -0.000767077 Jy ! Component: 1150 - total flux cleaned = -0.000867082 Jy ! Component: 1200 - total flux cleaned = -0.000937574 Jy ! Component: 1250 - total flux cleaned = -0.00100718 Jy ! Component: 1300 - total flux cleaned = -0.00100698 Jy ! Component: 1350 - total flux cleaned = -0.00108897 Jy ! Component: 1400 - total flux cleaned = -0.00111603 Jy ! Component: 1450 - total flux cleaned = -0.00119619 Jy ! Component: 1500 - total flux cleaned = -0.00127528 Jy ! Component: 1550 - total flux cleaned = -0.00135371 Jy ! Component: 1600 - total flux cleaned = -0.00139251 Jy ! Component: 1650 - total flux cleaned = -0.00141817 Jy ! Component: 1700 - total flux cleaned = -0.00143111 Jy ! Component: 1750 - total flux cleaned = -0.00150644 Jy ! Component: 1800 - total flux cleaned = -0.00151872 Jy ! Component: 1850 - total flux cleaned = -0.00156774 Jy ! Component: 1900 - total flux cleaned = -0.0015798 Jy ! Component: 1950 - total flux cleaned = -0.00160386 Jy ! Component: 2000 - total flux cleaned = -0.00159184 Jy ! Component: 2050 - total flux cleaned = -0.00160359 Jy ! Component: 2100 - total flux cleaned = -0.00165029 Jy ! Component: 2150 - total flux cleaned = -0.00165025 Jy ! Component: 2200 - total flux cleaned = -0.0016157 Jy ! Component: 2250 - total flux cleaned = -0.00166149 Jy ! Component: 2300 - total flux cleaned = -0.00169538 Jy ! Component: 2350 - total flux cleaned = -0.00168416 Jy ! Component: 2400 - total flux cleaned = -0.00172861 Jy ! Component: 2450 - total flux cleaned = -0.00172858 Jy ! Component: 2500 - total flux cleaned = -0.00172871 Jy ! Component: 2550 - total flux cleaned = -0.0017722 Jy ! Component: 2600 - total flux cleaned = -0.00180439 Jy ! Component: 2650 - total flux cleaned = -0.00178296 Jy ! Component: 2700 - total flux cleaned = -0.00180425 Jy ! Component: 2750 - total flux cleaned = -0.00182541 Jy ! Component: 2800 - total flux cleaned = -0.00183587 Jy ! Component: 2850 - total flux cleaned = -0.00188776 Jy ! Component: 2900 - total flux cleaned = -0.00185674 Jy ! Component: 2950 - total flux cleaned = -0.00190792 Jy ! Component: 3000 - total flux cleaned = -0.00189775 Jy ! Component: 3050 - total flux cleaned = -0.00197846 Jy ! Component: 3100 - total flux cleaned = -0.00197833 Jy ! Component: 3150 - total flux cleaned = -0.00200828 Jy ! Component: 3200 - total flux cleaned = -0.00201811 Jy ! Component: 3250 - total flux cleaned = -0.00206724 Jy ! Component: 3300 - total flux cleaned = -0.00209655 Jy ! Component: 3350 - total flux cleaned = -0.00213532 Jy ! Component: 3400 - total flux cleaned = -0.00215471 Jy ! Component: 3450 - total flux cleaned = -0.00220265 Jy ! Component: 3500 - total flux cleaned = -0.00224082 Jy ! Component: 3550 - total flux cleaned = -0.00228828 Jy ! Component: 3600 - total flux cleaned = -0.00230709 Jy ! Component: 3650 - total flux cleaned = -0.00230707 Jy ! Component: 3700 - total flux cleaned = -0.00235354 Jy ! Component: 3750 - total flux cleaned = -0.0023906 Jy ! Component: 3800 - total flux cleaned = -0.00240905 Jy ! Component: 3850 - total flux cleaned = -0.00245489 Jy ! Component: 3900 - total flux cleaned = -0.00247313 Jy ! Component: 3950 - total flux cleaned = -0.00252747 Jy ! Component: 4000 - total flux cleaned = -0.00251854 Jy ! Component: 4050 - total flux cleaned = -0.00259021 Jy ! Total flux subtracted in 4096 components = -0.00256343 Jy ! Clean residual min=-0.000499 max=0.000576 Jy/beam ! Clean residual mean=-0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.0691003 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 319 components and 0.0691003 Jy ![Exited script file: muppet] wmap "J0006+3422_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.441 x 6.007 at -3.294 degrees (North through East) ! Clean map min=-0.0012096 max=0.069204 Jy/beam ! Writing clean map to FITS file: J0006+3422_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0692039 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000158638 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.687696 0.687696 1.37539 2.75078 5.50157 11.0031 22.0063 44.0126 88.0251 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.441 x 6.007 at -3.294 degrees (North through East) ! Clean map min=-0.0012096 max=0.069204 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0006+3422_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:00:01 2017