! Started logfile: J0005-3445_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:47:12 2016 obs J0005-3445_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0005-3445_S_2014_08_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698439 visibilities/baseline/integration-bin. ! Found source: J0005-3445 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 15212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0005-3445_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977983Jy sigma=0.007521 ! Fit after self-cal, rms=0.931176Jy sigma=0.007211 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=12.09 mas, bpa=20.48 degrees ! Estimated noise=1039.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573346 Jy ! Component: 100 - total flux cleaned = 0.070044 Jy ! Total flux subtracted in 100 components = 0.070044 Jy ! Clean residual min=-0.003336 max=0.004306 Jy/beam ! Clean residual mean=0.000016 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.070044 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.070044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109134Jy sigma=0.000763 ! Fit after self-cal, rms=0.108791Jy sigma=0.000762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.032 mas, bmaj=14.67 mas, bpa=18.45 degrees ! Estimated noise=755.949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0067424 Jy ! Component: 100 - total flux cleaned = 0.0101554 Jy ! Component: 150 - total flux cleaned = 0.0120877 Jy ! Component: 200 - total flux cleaned = 0.0132271 Jy ! Total flux subtracted in 200 components = 0.0132271 Jy ! Clean residual min=-0.002664 max=0.002857 Jy/beam ! Clean residual mean=-0.000011 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.083271 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 66 components and 0.083271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108383Jy sigma=0.000758 ! Fit after self-cal, rms=0.108400Jy sigma=0.000758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.02 KP 1.04 ! LA 1.09 MK 1.00* NL 1.07 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 1.02 KP 0.99 ! LA 1.05 MK 1.00* NL 1.04 OV 1.01 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.09 HN 0.99 KP 0.93 ! LA 0.83 MK 1.00* NL 0.96 OV 0.90 ! PT 1.01 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.98 KP 0.89 ! LA 0.81 MK 1.00* NL 1.08 OV 1.06 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.108400Jy sigma=0.000758 ! Fit after self-cal, rms=0.107004Jy sigma=0.000756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.053 mas, bmaj=14.74 mas, bpa=18.38 degrees ! Estimated noise=752.488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291082 Jy ! Component: 100 - total flux cleaned = 0.000365063 Jy ! Component: 150 - total flux cleaned = 0.000396213 Jy ! Component: 200 - total flux cleaned = 0.000423991 Jy ! Total flux subtracted in 200 components = 0.000423991 Jy ! Clean residual min=-0.002528 max=0.002577 Jy/beam ! Clean residual mean=-0.000003 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.083695 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.083695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106998Jy sigma=0.000756 ! Fit after self-cal, rms=0.107013Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107013Jy sigma=0.000755 ! Fit after self-cal, rms=0.107397Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.055 mas, bmaj=14.7 mas, bpa=18.42 degrees ! Estimated noise=752.351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051988 Jy ! Component: 100 - total flux cleaned = 0.000577175 Jy ! Component: 150 - total flux cleaned = 0.000560895 Jy ! Component: 200 - total flux cleaned = 0.000560913 Jy ! Total flux subtracted in 200 components = 0.000560913 Jy ! Clean residual min=-0.002396 max=0.002422 Jy/beam ! Clean residual mean=0.000003 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0842559 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.0842559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107389Jy sigma=0.000755 ! Fit after self-cal, rms=0.107396Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118803 Jy ! Component: 100 - total flux cleaned = 8.83317e-05 Jy ! Component: 150 - total flux cleaned = 7.35757e-05 Jy ! Component: 200 - total flux cleaned = 8.72565e-05 Jy ! Total flux subtracted in 200 components = 8.72565e-05 Jy ! Clean residual min=-0.002396 max=0.002466 Jy/beam ! Clean residual mean=0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0843432 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.0843432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107392Jy sigma=0.000754 ! Fit after self-cal, rms=0.107389Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107389Jy sigma=0.000754 ! Fit after self-cal, rms=0.107190Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.055 mas, bmaj=14.65 mas, bpa=18.41 degrees ! Estimated noise=752.349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429879 Jy ! Component: 100 - total flux cleaned = 0.000480468 Jy ! Component: 150 - total flux cleaned = 0.0004803 Jy ! Component: 200 - total flux cleaned = 0.000479541 Jy ! Total flux subtracted in 200 components = 0.000479541 Jy ! Clean residual min=-0.002348 max=0.002370 Jy/beam ! Clean residual mean=0.000005 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0848227 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.0848227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107185Jy sigma=0.000754 ! Fit after self-cal, rms=0.107179Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.12737e-05 Jy ! Component: 100 - total flux cleaned = 3.44222e-05 Jy ! Component: 150 - total flux cleaned = 3.47164e-05 Jy ! Component: 200 - total flux cleaned = 3.47292e-05 Jy ! Total flux subtracted in 200 components = 3.47292e-05 Jy ! Clean residual min=-0.002358 max=0.002396 Jy/beam ! Clean residual mean=0.000005 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0848575 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.0848575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107175Jy sigma=0.000754 ! Fit after self-cal, rms=0.107171Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107171Jy sigma=0.000754 ! Fit after self-cal, rms=0.106899Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.737 mas, bmaj=26.95 mas, bpa=8.304 degrees ! Estimated noise=836.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394229 Jy ! Component: 100 - total flux cleaned = 0.00045077 Jy ! Component: 150 - total flux cleaned = 0.000500418 Jy ! Component: 200 - total flux cleaned = 0.000534002 Jy ! Total flux subtracted in 200 components = 0.000534002 Jy ! Clean residual min=-0.002581 max=0.002180 Jy/beam ! Clean residual mean=0.000008 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0853915 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 104 components and 0.0853915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106896Jy sigma=0.000754 ! Fit after self-cal, rms=0.106892Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20426e-05 Jy ! Component: 100 - total flux cleaned = 6.55511e-05 Jy ! Component: 150 - total flux cleaned = 8.56332e-05 Jy ! Component: 200 - total flux cleaned = 0.000104319 Jy ! Total flux subtracted in 200 components = 0.000104319 Jy ! Clean residual min=-0.002584 max=0.002183 Jy/beam ! Clean residual mean=0.000008 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0854958 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 107 components and 0.0854958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106891Jy sigma=0.000754 ! Fit after self-cal, rms=0.106891Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.056 mas, bmaj=14.61 mas, bpa=18.39 degrees ! Estimated noise=752.376 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.056 x 14.61 at 18.39 degrees (North through East) ! Clean map min=-0.0022723 max=0.072393 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=11.98 mas, bpa=20.45 degrees ! Estimated noise=1038.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570344 Jy ! Component: 100 - total flux cleaned = 0.0706024 Jy ! Component: 150 - total flux cleaned = 0.0766256 Jy ! Component: 200 - total flux cleaned = 0.0801948 Jy ! Total flux subtracted in 200 components = 0.0801948 Jy ! Clean residual min=-0.003199 max=0.003137 Jy/beam ! Clean residual mean=0.000009 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0801949 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0801949 Jy ! Inverting map and beam ! Estimated beam: bmin=4.056 mas, bmaj=14.61 mas, bpa=18.39 degrees ! Estimated noise=752.376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287523 Jy ! Component: 100 - total flux cleaned = 0.00429434 Jy ! Component: 150 - total flux cleaned = 0.00502263 Jy ! Component: 200 - total flux cleaned = 0.005155 Jy ! Total flux subtracted in 200 components = 0.005155 Jy ! Clean residual min=-0.002427 max=0.002446 Jy/beam ! Clean residual mean=0.000005 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0853499 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.0853499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.737 mas, bmaj=26.95 mas, bpa=8.304 degrees ! Estimated noise=836.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314026 Jy ! Component: 100 - total flux cleaned = 0.000356205 Jy ! Component: 150 - total flux cleaned = 0.000368429 Jy ! Component: 200 - total flux cleaned = 0.000391366 Jy ! Total flux subtracted in 200 components = 0.000391366 Jy ! Clean residual min=-0.002637 max=0.002197 Jy/beam ! Clean residual mean=0.000009 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0857413 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.87711e-06 Jy ! Component: 100 - total flux cleaned = 1.90222e-05 Jy ! Component: 150 - total flux cleaned = 1.90103e-05 Jy ! Component: 200 - total flux cleaned = 2.76537e-05 Jy ! Total flux subtracted in 200 components = 2.76537e-05 Jy ! Clean residual min=-0.002618 max=0.002203 Jy/beam ! Clean residual mean=0.000009 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0857689 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.0857689 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.056 mas, bmaj=14.61 mas, bpa=18.39 degrees ! Estimated noise=752.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.16781e-05 Jy ! Component: 100 - total flux cleaned = -0.00010801 Jy ! Component: 150 - total flux cleaned = -0.000139694 Jy ! Component: 200 - total flux cleaned = -0.000168916 Jy ! Total flux subtracted in 200 components = -0.000168916 Jy ! Clean residual min=-0.002372 max=0.002453 Jy/beam ! Clean residual mean=0.000005 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0856 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.0856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106896Jy sigma=0.000754 ! Fit after self-cal, rms=0.106895Jy sigma=0.000754 wmodel J0005-3445_S_2014_08_09_pus_map.mod ! Writing 62 model components to file: J0005-3445_S_2014_08_09_pus_map.mod wobs J0005-3445_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0005-3445_S_2014_08_09_pus_uvs.fits wwins J0005-3445_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J0005-3445_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445559 Jy ! Component: 100 - total flux cleaned = 0.000564396 Jy ! Component: 150 - total flux cleaned = 0.000458383 Jy ! Component: 200 - total flux cleaned = 0.00042461 Jy ! Component: 250 - total flux cleaned = 0.000521005 Jy ! Component: 300 - total flux cleaned = 0.000644259 Jy ! Component: 350 - total flux cleaned = 0.000763288 Jy ! Component: 400 - total flux cleaned = 0.000763809 Jy ! Component: 450 - total flux cleaned = 0.000819161 Jy ! Component: 500 - total flux cleaned = 0.000845563 Jy ! Component: 550 - total flux cleaned = 0.000897348 Jy ! Component: 600 - total flux cleaned = 0.000896834 Jy ! Component: 650 - total flux cleaned = 0.00104789 Jy ! Component: 700 - total flux cleaned = 0.00109702 Jy ! Component: 750 - total flux cleaned = 0.00124243 Jy ! Component: 800 - total flux cleaned = 0.00133662 Jy ! Component: 850 - total flux cleaned = 0.00145223 Jy ! Component: 900 - total flux cleaned = 0.0013839 Jy ! Component: 950 - total flux cleaned = 0.00140705 Jy ! Component: 1000 - total flux cleaned = 0.00156077 Jy ! Component: 1050 - total flux cleaned = 0.00156006 Jy ! Component: 1100 - total flux cleaned = 0.00153891 Jy ! Component: 1150 - total flux cleaned = 0.00162234 Jy ! Component: 1200 - total flux cleaned = 0.00166349 Jy ! Component: 1250 - total flux cleaned = 0.00166327 Jy ! Component: 1300 - total flux cleaned = 0.0016233 Jy ! Component: 1350 - total flux cleaned = 0.00164311 Jy ! Component: 1400 - total flux cleaned = 0.00160452 Jy ! Component: 1450 - total flux cleaned = 0.00158553 Jy ! Component: 1500 - total flux cleaned = 0.00156653 Jy ! Component: 1550 - total flux cleaned = 0.00158528 Jy ! Component: 1600 - total flux cleaned = 0.00154828 Jy ! Component: 1650 - total flux cleaned = 0.00145748 Jy ! Component: 1700 - total flux cleaned = 0.0014756 Jy ! Component: 1750 - total flux cleaned = 0.00147569 Jy ! Component: 1800 - total flux cleaned = 0.00147565 Jy ! Component: 1850 - total flux cleaned = 0.00145852 Jy ! Component: 1900 - total flux cleaned = 0.00150985 Jy ! Component: 1950 - total flux cleaned = 0.00147588 Jy ! Component: 2000 - total flux cleaned = 0.00149252 Jy ! Component: 2050 - total flux cleaned = 0.001476 Jy ! Component: 2100 - total flux cleaned = 0.00150902 Jy ! Component: 2150 - total flux cleaned = 0.0014767 Jy ! Component: 2200 - total flux cleaned = 0.00154088 Jy ! Component: 2250 - total flux cleaned = 0.00150906 Jy ! Component: 2300 - total flux cleaned = 0.00149321 Jy ! Component: 2350 - total flux cleaned = 0.0015399 Jy ! Component: 2400 - total flux cleaned = 0.00149346 Jy ! Component: 2450 - total flux cleaned = 0.00147814 Jy ! Component: 2500 - total flux cleaned = 0.00149334 Jy ! Component: 2550 - total flux cleaned = 0.00146323 Jy ! Component: 2600 - total flux cleaned = 0.0014482 Jy ! Component: 2650 - total flux cleaned = 0.00144818 Jy ! Component: 2700 - total flux cleaned = 0.00149193 Jy ! Component: 2750 - total flux cleaned = 0.00144822 Jy ! Component: 2800 - total flux cleaned = 0.00143369 Jy ! Component: 2850 - total flux cleaned = 0.00136237 Jy ! Component: 2900 - total flux cleaned = 0.00137662 Jy ! Component: 2950 - total flux cleaned = 0.00134838 Jy ! Component: 3000 - total flux cleaned = 0.00134839 Jy ! Component: 3050 - total flux cleaned = 0.00125172 Jy ! Component: 3100 - total flux cleaned = 0.00127917 Jy ! Component: 3150 - total flux cleaned = 0.00125194 Jy ! Component: 3200 - total flux cleaned = 0.00121148 Jy ! Component: 3250 - total flux cleaned = 0.00119812 Jy ! Component: 3300 - total flux cleaned = 0.00118469 Jy ! Component: 3350 - total flux cleaned = 0.00118455 Jy ! Component: 3400 - total flux cleaned = 0.0011583 Jy ! Component: 3450 - total flux cleaned = 0.00115833 Jy ! Component: 3500 - total flux cleaned = 0.00115844 Jy ! Component: 3550 - total flux cleaned = 0.00114574 Jy ! Component: 3600 - total flux cleaned = 0.00110758 Jy ! Component: 3650 - total flux cleaned = 0.00108234 Jy ! Component: 3700 - total flux cleaned = 0.00109484 Jy ! Component: 3750 - total flux cleaned = 0.00105751 Jy ! Component: 3800 - total flux cleaned = 0.00106989 Jy ! Component: 3850 - total flux cleaned = 0.001082 Jy ! Component: 3900 - total flux cleaned = 0.00109406 Jy ! Component: 3950 - total flux cleaned = 0.00108201 Jy ! Component: 4000 - total flux cleaned = 0.00107022 Jy ! Component: 4050 - total flux cleaned = 0.00111787 Jy ! Total flux subtracted in 4096 components = 0.00111782 Jy ! Clean residual min=-0.000849 max=0.000773 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0867178 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 358 components and 0.0867178 Jy ![Exited script file: muppet] wmap "J0005-3445_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.056 x 14.61 at 18.39 degrees (North through East) ! Clean map min=-0.0018671 max=0.071603 Jy/beam ! Writing clean map to FITS file: J0005-3445_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0716026 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229812 device "J0005-3445_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0005-3445_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.962863 0.962863 1.92573 3.85145 7.7029 15.4058 30.8116 61.6232 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.056 x 14.61 at 18.39 degrees (North through East) ! Clean map min=-0.0018671 max=0.071603 Jy/beam quit ! Quitting program ! Log file J0005-3445_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:47:19 2016