! Started logfile: J0005+5428_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:11:23 2017 obs J0005+5428_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0005+5428_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0005+5428 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0005+5428_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.775354Jy sigma=0.011273 ! Fit after self-cal, rms=0.726852Jy sigma=0.010631 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=4.062 mas, bpa=-81.96 degrees ! Estimated noise=1256.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208259 Jy ! Component: 100 - total flux cleaned = 0.257407 Jy ! Total flux subtracted in 100 components = 0.257407 Jy ! Clean residual min=-0.012393 max=0.017960 Jy/beam ! Clean residual mean=0.000065 rms=0.003226 Jy/beam ! Combined flux in latest and established models = 0.257407 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.257407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089033Jy sigma=0.001061 ! Fit after self-cal, rms=0.089057Jy sigma=0.001061 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=4.853 mas, bpa=-77.57 degrees ! Estimated noise=663.578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218278 Jy ! Component: 100 - total flux cleaned = 0.0307598 Jy ! Component: 150 - total flux cleaned = 0.035231 Jy ! Component: 200 - total flux cleaned = 0.0379262 Jy ! Total flux subtracted in 200 components = 0.0379262 Jy ! Clean residual min=-0.008193 max=0.009476 Jy/beam ! Clean residual mean=0.000086 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.295333 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.295333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082505Jy sigma=0.001013 ! Fit after self-cal, rms=0.082534Jy sigma=0.001013 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.02 ! MK 1.00 NL 0.97 OV 0.96 PT 1.00 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 1.01 ! MK 1.00 NL 1.01 OV 0.98 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.81 ! MK 1.03 NL 0.99 OV 0.91 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.87 ! MK 1.03 NL 1.07 OV 0.96 PT 1.00 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.082534Jy sigma=0.001013 ! Fit after self-cal, rms=0.073552Jy sigma=0.000906 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.769 mas, bmaj=4.834 mas, bpa=-78.07 degrees ! Estimated noise=664.099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347231 Jy ! Component: 100 - total flux cleaned = 0.00388682 Jy ! Component: 150 - total flux cleaned = 0.00369954 Jy ! Component: 200 - total flux cleaned = 0.00380851 Jy ! Total flux subtracted in 200 components = 0.00380851 Jy ! Clean residual min=-0.002501 max=0.002557 Jy/beam ! Clean residual mean=0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.299142 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 0.299142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073301Jy sigma=0.000903 ! Fit after self-cal, rms=0.072889Jy sigma=0.000902 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072889Jy sigma=0.000902 ! Fit after self-cal, rms=0.072652Jy sigma=0.000901 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=4.828 mas, bpa=-78.18 degrees ! Estimated noise=663.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748473 Jy ! Component: 100 - total flux cleaned = 0.000705606 Jy ! Component: 150 - total flux cleaned = 0.000544501 Jy ! Component: 200 - total flux cleaned = 0.000543467 Jy ! Total flux subtracted in 200 components = 0.000543467 Jy ! Clean residual min=-0.001993 max=0.002306 Jy/beam ! Clean residual mean=0.000000 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.299685 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.299685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072572Jy sigma=0.000901 ! Fit after self-cal, rms=0.072565Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (77.5, 76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020445 Jy ! Component: 100 - total flux cleaned = 0.00204916 Jy ! Component: 150 - total flux cleaned = 0.00209696 Jy ! Component: 200 - total flux cleaned = 0.00221585 Jy ! Total flux subtracted in 200 components = 0.00221585 Jy ! Clean residual min=-0.001761 max=0.001567 Jy/beam ! Clean residual mean=0.000002 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.301901 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.301901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072443Jy sigma=0.000899 ! Fit after self-cal, rms=0.072432Jy sigma=0.000899 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072432Jy sigma=0.000899 ! Fit after self-cal, rms=0.072435Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=4.828 mas, bpa=-78.25 degrees ! Estimated noise=663.291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000846331 Jy ! Component: 100 - total flux cleaned = 0.000917688 Jy ! Component: 150 - total flux cleaned = 0.00107689 Jy ! Component: 200 - total flux cleaned = 0.00116444 Jy ! Total flux subtracted in 200 components = 0.00116444 Jy ! Clean residual min=-0.001673 max=0.001496 Jy/beam ! Clean residual mean=0.000003 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.303065 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.303065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072390Jy sigma=0.000899 ! Fit after self-cal, rms=0.072395Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179708 Jy ! Component: 100 - total flux cleaned = 0.000230563 Jy ! Component: 150 - total flux cleaned = 0.000329413 Jy ! Component: 200 - total flux cleaned = 0.000375545 Jy ! Total flux subtracted in 200 components = 0.000375545 Jy ! Clean residual min=-0.001632 max=0.001444 Jy/beam ! Clean residual mean=0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.303441 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 77 components and 0.303441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072371Jy sigma=0.000899 ! Fit after self-cal, rms=0.072372Jy sigma=0.000899 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072372Jy sigma=0.000899 ! Fit after self-cal, rms=0.072374Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.836 mas, bmaj=8.622 mas, bpa=-88.43 degrees ! Estimated noise=763.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447699 Jy ! Component: 100 - total flux cleaned = 0.00059394 Jy ! Component: 150 - total flux cleaned = 0.000741208 Jy ! Component: 200 - total flux cleaned = 0.00082109 Jy ! Total flux subtracted in 200 components = 0.00082109 Jy ! Clean residual min=-0.001408 max=0.001266 Jy/beam ! Clean residual mean=0.000005 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.304262 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.304262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072371Jy sigma=0.000899 ! Fit after self-cal, rms=0.072375Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.86365e-05 Jy ! Component: 100 - total flux cleaned = 9.74568e-05 Jy ! Component: 150 - total flux cleaned = 9.76502e-05 Jy ! Component: 200 - total flux cleaned = 9.75116e-05 Jy ! Total flux subtracted in 200 components = 9.75116e-05 Jy ! Clean residual min=-0.001426 max=0.001202 Jy/beam ! Clean residual mean=0.000004 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.30436 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.30436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072374Jy sigma=0.000899 ! Fit after self-cal, rms=0.072375Jy sigma=0.000899 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=4.828 mas, bpa=-78.32 degrees ! Estimated noise=663.244 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.768 x 4.828 at -78.32 degrees (North through East) ! Clean map min=-0.0017491 max=0.27175 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=4.02 mas, bpa=-83.09 degrees ! Estimated noise=1265.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209625 Jy ! Component: 100 - total flux cleaned = 0.259515 Jy ! Component: 150 - total flux cleaned = 0.279345 Jy ! Component: 200 - total flux cleaned = 0.288546 Jy ! Total flux subtracted in 200 components = 0.288546 Jy ! Clean residual min=-0.005229 max=0.005323 Jy/beam ! Clean residual mean=0.000011 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.288546 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.288546 Jy ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=4.828 mas, bpa=-78.32 degrees ! Estimated noise=663.244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500336 Jy ! Component: 100 - total flux cleaned = 0.00821582 Jy ! Component: 150 - total flux cleaned = 0.0106278 Jy ! Component: 200 - total flux cleaned = 0.0118119 Jy ! Total flux subtracted in 200 components = 0.0118119 Jy ! Clean residual min=-0.002109 max=0.001871 Jy/beam ! Clean residual mean=0.000010 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.300358 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 0.300358 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.836 mas, bmaj=8.622 mas, bpa=-88.43 degrees ! Estimated noise=763.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147038 Jy ! Component: 100 - total flux cleaned = 0.00194705 Jy ! Component: 150 - total flux cleaned = 0.00223914 Jy ! Component: 200 - total flux cleaned = 0.00255005 Jy ! Total flux subtracted in 200 components = 0.00255005 Jy ! Clean residual min=-0.001541 max=0.001467 Jy/beam ! Clean residual mean=0.000012 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.302908 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177077 Jy ! Component: 100 - total flux cleaned = 0.000358376 Jy ! Component: 150 - total flux cleaned = 0.000501269 Jy ! Component: 200 - total flux cleaned = 0.000592781 Jy ! Total flux subtracted in 200 components = 0.000592781 Jy ! Clean residual min=-0.001438 max=0.001328 Jy/beam ! Clean residual mean=0.000009 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.303501 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 86 components and 0.303501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=4.828 mas, bpa=-78.32 degrees ! Estimated noise=663.244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430887 Jy ! Component: 100 - total flux cleaned = 0.000676271 Jy ! Component: 150 - total flux cleaned = 0.000811307 Jy ! Component: 200 - total flux cleaned = 0.000852244 Jy ! Total flux subtracted in 200 components = 0.000852244 Jy ! Clean residual min=-0.001830 max=0.001631 Jy/beam ! Clean residual mean=0.000003 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.304353 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 99 components and 0.304353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072435Jy sigma=0.000899 ! Fit after self-cal, rms=0.072432Jy sigma=0.000899 wmodel J0005+5428_S_2014_01_04_pus_map.mod ! Writing 99 model components to file: J0005+5428_S_2014_01_04_pus_map.mod wobs J0005+5428_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0005+5428_S_2014_01_04_pus_uvs.fits wwins J0005+5428_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0005+5428_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000419685 Jy ! Component: 100 - total flux cleaned = -0.000823501 Jy ! Component: 150 - total flux cleaned = -0.00117933 Jy ! Component: 200 - total flux cleaned = -0.0014144 Jy ! Component: 250 - total flux cleaned = -0.00164058 Jy ! Component: 300 - total flux cleaned = -0.00176234 Jy ! Component: 350 - total flux cleaned = -0.00190359 Jy ! Component: 400 - total flux cleaned = -0.00197253 Jy ! Component: 450 - total flux cleaned = -0.00206107 Jy ! Component: 500 - total flux cleaned = -0.00201752 Jy ! Component: 550 - total flux cleaned = -0.00199667 Jy ! Component: 600 - total flux cleaned = -0.00203811 Jy ! Component: 650 - total flux cleaned = -0.00205823 Jy ! Component: 700 - total flux cleaned = -0.00211731 Jy ! Component: 750 - total flux cleaned = -0.00213661 Jy ! Component: 800 - total flux cleaned = -0.00219437 Jy ! Component: 850 - total flux cleaned = -0.00225098 Jy ! Component: 900 - total flux cleaned = -0.00234341 Jy ! Component: 950 - total flux cleaned = -0.00239751 Jy ! Component: 1000 - total flux cleaned = -0.00241512 Jy ! Component: 1050 - total flux cleaned = -0.00244988 Jy ! Component: 1100 - total flux cleaned = -0.0024496 Jy ! Component: 1150 - total flux cleaned = -0.00246658 Jy ! Component: 1200 - total flux cleaned = -0.00244985 Jy ! Component: 1250 - total flux cleaned = -0.00246669 Jy ! Component: 1300 - total flux cleaned = -0.00249955 Jy ! Component: 1350 - total flux cleaned = -0.00249963 Jy ! Component: 1400 - total flux cleaned = -0.00254739 Jy ! Component: 1450 - total flux cleaned = -0.00256302 Jy ! Component: 1500 - total flux cleaned = -0.0025631 Jy ! Component: 1550 - total flux cleaned = -0.00253265 Jy ! Component: 1600 - total flux cleaned = -0.00253273 Jy ! Component: 1650 - total flux cleaned = -0.00253288 Jy ! Component: 1700 - total flux cleaned = -0.00256251 Jy ! Component: 1750 - total flux cleaned = -0.00254775 Jy ! Component: 1800 - total flux cleaned = -0.0025334 Jy ! Component: 1850 - total flux cleaned = -0.00257602 Jy ! Component: 1900 - total flux cleaned = -0.00254787 Jy ! Component: 1950 - total flux cleaned = -0.00253417 Jy ! Component: 2000 - total flux cleaned = -0.00256165 Jy ! Component: 2050 - total flux cleaned = -0.00257528 Jy ! Component: 2100 - total flux cleaned = -0.0025889 Jy ! Component: 2150 - total flux cleaned = -0.00260218 Jy ! Component: 2200 - total flux cleaned = -0.00265472 Jy ! Component: 2250 - total flux cleaned = -0.00264159 Jy ! Component: 2300 - total flux cleaned = -0.00261579 Jy ! Component: 2350 - total flux cleaned = -0.00264145 Jy ! Component: 2400 - total flux cleaned = -0.00264161 Jy ! Component: 2450 - total flux cleaned = -0.00264161 Jy ! Component: 2500 - total flux cleaned = -0.00265401 Jy ! Component: 2550 - total flux cleaned = -0.00264173 Jy ! Component: 2600 - total flux cleaned = -0.00267842 Jy ! Component: 2650 - total flux cleaned = -0.00265419 Jy ! Component: 2700 - total flux cleaned = -0.00265418 Jy ! Component: 2750 - total flux cleaned = -0.00270184 Jy ! Component: 2800 - total flux cleaned = -0.00270177 Jy ! Component: 2850 - total flux cleaned = -0.00269006 Jy ! Component: 2900 - total flux cleaned = -0.00270175 Jy ! Component: 2950 - total flux cleaned = -0.00271336 Jy ! Component: 3000 - total flux cleaned = -0.00271334 Jy ! Component: 3050 - total flux cleaned = -0.00274773 Jy ! Component: 3100 - total flux cleaned = -0.00274769 Jy ! Component: 3150 - total flux cleaned = -0.00273631 Jy ! Component: 3200 - total flux cleaned = -0.00277006 Jy ! Component: 3250 - total flux cleaned = -0.00277012 Jy ! Component: 3300 - total flux cleaned = -0.00279229 Jy ! Component: 3350 - total flux cleaned = -0.00283635 Jy ! Component: 3400 - total flux cleaned = -0.0028363 Jy ! Component: 3450 - total flux cleaned = -0.0028473 Jy ! Component: 3500 - total flux cleaned = -0.00287987 Jy ! Component: 3550 - total flux cleaned = -0.00290149 Jy ! Component: 3600 - total flux cleaned = -0.00291218 Jy ! Component: 3650 - total flux cleaned = -0.00293348 Jy ! Component: 3700 - total flux cleaned = -0.00294407 Jy ! Component: 3750 - total flux cleaned = -0.00294416 Jy ! Component: 3800 - total flux cleaned = -0.00298626 Jy ! Component: 3850 - total flux cleaned = -0.00301772 Jy ! Component: 3900 - total flux cleaned = -0.00305947 Jy ! Component: 3950 - total flux cleaned = -0.00309059 Jy ! Component: 4000 - total flux cleaned = -0.00313202 Jy ! Component: 4050 - total flux cleaned = -0.00318354 Jy ! Total flux subtracted in 4096 components = -0.00319378 Jy ! Clean residual min=-0.000640 max=0.000604 Jy/beam ! Clean residual mean=-0.000003 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.301159 Jy keep ! Adding 199 model components to the UV plane model. ! The established model now contains 298 components and 0.301159 Jy ![Exited script file: muppet] wmap "J0005+5428_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.768 x 4.828 at -78.32 degrees (North through East) ! Clean map min=-0.0018241 max=0.27209 Jy/beam ! Writing clean map to FITS file: J0005+5428_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.272087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162389 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.179049 0.179049 0.358097 0.716194 1.43239 2.86478 5.72955 11.4591 22.9182 45.8364 91.6728 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.272 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.768 x 4.828 at -78.32 degrees (North through East) ! Clean map min=-0.0018241 max=0.27209 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0005+5428_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:11:28 2017