! Started logfile: J0004+4615_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:46:58 2016 obs J0004+4615_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0004+4615_S_2014_08_09_pus_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.743379 visibilities/baseline/integration-bin. ! Found source: J0004+4615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 9768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0004+4615_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.865226Jy sigma=0.010261 ! Fit after self-cal, rms=0.855634Jy sigma=0.010156 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=6.008 mas, bpa=53.5 degrees ! Estimated noise=976.494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113506 Jy ! Component: 100 - total flux cleaned = 0.138281 Jy ! Total flux subtracted in 100 components = 0.138281 Jy ! Clean residual min=-0.004369 max=0.006975 Jy/beam ! Clean residual mean=0.000010 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.138281 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.138281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072859Jy sigma=0.000792 ! Fit after self-cal, rms=0.072851Jy sigma=0.000792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.102 mas, bmaj=6.791 mas, bpa=49.52 degrees ! Estimated noise=614.403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738131 Jy ! Component: 100 - total flux cleaned = 0.0110528 Jy ! Component: 150 - total flux cleaned = 0.0132315 Jy ! Component: 200 - total flux cleaned = 0.0145891 Jy ! Total flux subtracted in 200 components = 0.0145891 Jy ! Clean residual min=-0.002604 max=0.003042 Jy/beam ! Clean residual mean=-0.000010 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.15287 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 36 components and 0.15287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071946Jy sigma=0.000785 ! Fit after self-cal, rms=0.071943Jy sigma=0.000785 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.88 HN 0.94 KP 1.06 ! LA 1.10 MK 1.00* NL 1.00 OV 0.99 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 1.04 KP 1.01 ! LA 1.08 MK 1.00* NL 1.01 OV 1.02 ! PT 1.03 SC 1.10 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.13 HN 1.03 KP 0.92 ! LA 0.83 MK 1.00* NL 1.02 OV 0.94 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.99 KP 0.88 ! LA 0.79 MK 1.00* NL 1.07 OV 0.98 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.071943Jy sigma=0.000785 ! Fit after self-cal, rms=0.068740Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.126 mas, bmaj=6.796 mas, bpa=49.44 degrees ! Estimated noise=613.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, 127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187704 Jy ! Component: 100 - total flux cleaned = 0.00198582 Jy ! Component: 150 - total flux cleaned = 0.00195942 Jy ! Component: 200 - total flux cleaned = 0.0019841 Jy ! Total flux subtracted in 200 components = 0.0019841 Jy ! Clean residual min=-0.001887 max=0.001695 Jy/beam ! Clean residual mean=-0.000021 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.154854 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.154854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068682Jy sigma=0.000765 ! Fit after self-cal, rms=0.068672Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068672Jy sigma=0.000765 ! Fit after self-cal, rms=0.068736Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.114 mas, bmaj=6.809 mas, bpa=49.46 degrees ! Estimated noise=612.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.84892e-05 Jy ! Component: 100 - total flux cleaned = 4.60085e-05 Jy ! Component: 150 - total flux cleaned = 4.61555e-05 Jy ! Component: 200 - total flux cleaned = 4.61689e-05 Jy ! Total flux subtracted in 200 components = 4.61689e-05 Jy ! Clean residual min=-0.001862 max=0.001548 Jy/beam ! Clean residual mean=-0.000023 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.1549 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.1549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068727Jy sigma=0.000764 ! Fit after self-cal, rms=0.068731Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.03414e-05 Jy ! Component: 100 - total flux cleaned = 6.7061e-05 Jy ! Component: 150 - total flux cleaned = 7.93751e-05 Jy ! Component: 200 - total flux cleaned = 7.92293e-05 Jy ! Total flux subtracted in 200 components = 7.92293e-05 Jy ! Clean residual min=-0.001858 max=0.001501 Jy/beam ! Clean residual mean=-0.000023 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.154979 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.154979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068727Jy sigma=0.000764 ! Fit after self-cal, rms=0.068726Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068726Jy sigma=0.000764 ! Fit after self-cal, rms=0.068718Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.115 mas, bmaj=6.814 mas, bpa=49.46 degrees ! Estimated noise=612.524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027412 Jy ! Component: 100 - total flux cleaned = -0.000273857 Jy ! Component: 150 - total flux cleaned = -0.000273451 Jy ! Component: 200 - total flux cleaned = -0.000273785 Jy ! Total flux subtracted in 200 components = -0.000273785 Jy ! Clean residual min=-0.001833 max=0.001482 Jy/beam ! Clean residual mean=-0.000022 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.154705 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.154705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068714Jy sigma=0.000764 ! Fit after self-cal, rms=0.068714Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.74183e-06 Jy ! Component: 100 - total flux cleaned = -2.09847e-05 Jy ! Component: 150 - total flux cleaned = -2.10374e-05 Jy ! Component: 200 - total flux cleaned = -2.98608e-05 Jy ! Total flux subtracted in 200 components = -2.98608e-05 Jy ! Clean residual min=-0.001829 max=0.001452 Jy/beam ! Clean residual mean=-0.000022 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.154675 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.154675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068712Jy sigma=0.000764 ! Fit after self-cal, rms=0.068711Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068711Jy sigma=0.000764 ! Fit after self-cal, rms=0.068703Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.807 mas, bmaj=8.919 mas, bpa=-69.95 degrees ! Estimated noise=690.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164732 Jy ! Component: 100 - total flux cleaned = -0.00010114 Jy ! Component: 150 - total flux cleaned = -6.28792e-05 Jy ! Component: 200 - total flux cleaned = -4.38243e-05 Jy ! Total flux subtracted in 200 components = -4.38243e-05 Jy ! Clean residual min=-0.001756 max=0.001509 Jy/beam ! Clean residual mean=-0.000039 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.154632 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.154632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068702Jy sigma=0.000764 ! Fit after self-cal, rms=0.068701Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.73074e-06 Jy ! Component: 100 - total flux cleaned = 3.54211e-06 Jy ! Component: 150 - total flux cleaned = 9.14028e-06 Jy ! Component: 200 - total flux cleaned = 1.45144e-05 Jy ! Total flux subtracted in 200 components = 1.45144e-05 Jy ! Clean residual min=-0.001740 max=0.001508 Jy/beam ! Clean residual mean=-0.000039 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.154646 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.154646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068701Jy sigma=0.000764 ! Fit after self-cal, rms=0.068700Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.117 mas, bmaj=6.816 mas, bpa=49.47 degrees ! Estimated noise=612.212 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.117 x 6.816 at 49.47 degrees (North through East) ! Clean map min=-0.0017809 max=0.14464 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.306 mas, bmaj=6.031 mas, bpa=53.36 degrees ! Estimated noise=967.975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112473 Jy ! Component: 100 - total flux cleaned = 0.137002 Jy ! Component: 150 - total flux cleaned = 0.143096 Jy ! Component: 200 - total flux cleaned = 0.146477 Jy ! Total flux subtracted in 200 components = 0.146477 Jy ! Clean residual min=-0.003042 max=0.002456 Jy/beam ! Clean residual mean=-0.000007 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.146477 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.146477 Jy ! Inverting map and beam ! Estimated beam: bmin=5.117 mas, bmaj=6.816 mas, bpa=49.47 degrees ! Estimated noise=612.212 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273046 Jy ! Component: 100 - total flux cleaned = 0.00431448 Jy ! Component: 150 - total flux cleaned = 0.00539654 Jy ! Component: 200 - total flux cleaned = 0.00594796 Jy ! Total flux subtracted in 200 components = 0.00594796 Jy ! Clean residual min=-0.001835 max=0.001643 Jy/beam ! Clean residual mean=-0.000021 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.152425 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 0.152425 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.807 mas, bmaj=8.919 mas, bpa=-69.95 degrees ! Estimated noise=690.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000855163 Jy ! Component: 100 - total flux cleaned = 0.00125983 Jy ! Component: 150 - total flux cleaned = 0.00150402 Jy ! Component: 200 - total flux cleaned = 0.00164366 Jy ! Total flux subtracted in 200 components = 0.00164366 Jy ! Clean residual min=-0.001698 max=0.001592 Jy/beam ! Clean residual mean=-0.000038 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.154069 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131158 Jy ! Component: 100 - total flux cleaned = 0.00023121 Jy ! Component: 150 - total flux cleaned = 0.000317289 Jy ! Component: 200 - total flux cleaned = 0.000391573 Jy ! Total flux subtracted in 200 components = 0.000391573 Jy ! Clean residual min=-0.001710 max=0.001544 Jy/beam ! Clean residual mean=-0.000039 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.15446 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 78 components and 0.15446 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.117 mas, bmaj=6.816 mas, bpa=49.47 degrees ! Estimated noise=612.212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62916e-05 Jy ! Component: 100 - total flux cleaned = -1.0627e-05 Jy ! Component: 150 - total flux cleaned = -2.37596e-05 Jy ! Component: 200 - total flux cleaned = -4.78732e-05 Jy ! Total flux subtracted in 200 components = -4.78732e-05 Jy ! Clean residual min=-0.001840 max=0.001393 Jy/beam ! Clean residual mean=-0.000022 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.154412 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 93 components and 0.154412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068710Jy sigma=0.000764 ! Fit after self-cal, rms=0.068707Jy sigma=0.000764 wmodel J0004+4615_S_2014_08_09_pus_map.mod ! Writing 93 model components to file: J0004+4615_S_2014_08_09_pus_map.mod wobs J0004+4615_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0004+4615_S_2014_08_09_pus_uvs.fits wwins J0004+4615_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J0004+4615_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000810504 Jy ! Component: 100 - total flux cleaned = -0.00148344 Jy ! Component: 150 - total flux cleaned = -0.00203193 Jy ! Component: 200 - total flux cleaned = -0.00255516 Jy ! Component: 250 - total flux cleaned = -0.00291415 Jy ! Component: 300 - total flux cleaned = -0.00328298 Jy ! Component: 350 - total flux cleaned = -0.00355092 Jy ! Component: 400 - total flux cleaned = -0.00374657 Jy ! Component: 450 - total flux cleaned = -0.00393693 Jy ! Component: 500 - total flux cleaned = -0.00403998 Jy ! Component: 550 - total flux cleaned = -0.0041412 Jy ! Component: 600 - total flux cleaned = -0.00424025 Jy ! Component: 650 - total flux cleaned = -0.00429858 Jy ! Component: 700 - total flux cleaned = -0.00443091 Jy ! Component: 750 - total flux cleaned = -0.00450514 Jy ! Component: 800 - total flux cleaned = -0.00454118 Jy ! Component: 850 - total flux cleaned = -0.00459512 Jy ! Component: 900 - total flux cleaned = -0.0046308 Jy ! Component: 950 - total flux cleaned = -0.00473477 Jy ! Component: 1000 - total flux cleaned = -0.00476846 Jy ! Component: 1050 - total flux cleaned = -0.00480216 Jy ! Component: 1100 - total flux cleaned = -0.00486874 Jy ! Component: 1150 - total flux cleaned = -0.00490164 Jy ! Component: 1200 - total flux cleaned = -0.00493405 Jy ! Component: 1250 - total flux cleaned = -0.00496575 Jy ! Component: 1300 - total flux cleaned = -0.00494997 Jy ! Component: 1350 - total flux cleaned = -0.0049656 Jy ! Component: 1400 - total flux cleaned = -0.0050423 Jy ! Component: 1450 - total flux cleaned = -0.00502679 Jy ! Component: 1500 - total flux cleaned = -0.00502669 Jy ! Component: 1550 - total flux cleaned = -0.00499738 Jy ! Component: 1600 - total flux cleaned = -0.00501201 Jy ! Component: 1650 - total flux cleaned = -0.00498315 Jy ! Component: 1700 - total flux cleaned = -0.00498331 Jy ! Component: 1750 - total flux cleaned = -0.00499767 Jy ! Component: 1800 - total flux cleaned = -0.00498405 Jy ! Component: 1850 - total flux cleaned = -0.00498418 Jy ! Component: 1900 - total flux cleaned = -0.00499771 Jy ! Component: 1950 - total flux cleaned = -0.00499763 Jy ! Component: 2000 - total flux cleaned = -0.00495736 Jy ! Component: 2050 - total flux cleaned = -0.00495728 Jy ! Component: 2100 - total flux cleaned = -0.00489169 Jy ! Component: 2150 - total flux cleaned = -0.00490458 Jy ! Component: 2200 - total flux cleaned = -0.00482752 Jy ! Component: 2250 - total flux cleaned = -0.00482759 Jy ! Component: 2300 - total flux cleaned = -0.00484007 Jy ! Component: 2350 - total flux cleaned = -0.0048026 Jy ! Component: 2400 - total flux cleaned = -0.00475317 Jy ! Component: 2450 - total flux cleaned = -0.00475323 Jy ! Component: 2500 - total flux cleaned = -0.00475334 Jy ! Component: 2550 - total flux cleaned = -0.0047052 Jy ! Component: 2600 - total flux cleaned = -0.00468124 Jy ! Component: 2650 - total flux cleaned = -0.00469315 Jy ! Component: 2700 - total flux cleaned = -0.00468156 Jy ! Component: 2750 - total flux cleaned = -0.00468164 Jy ! Component: 2800 - total flux cleaned = -0.00470467 Jy ! Component: 2850 - total flux cleaned = -0.00469319 Jy ! Component: 2900 - total flux cleaned = -0.00469328 Jy ! Component: 2950 - total flux cleaned = -0.00469327 Jy ! Component: 3000 - total flux cleaned = -0.00467098 Jy ! Component: 3050 - total flux cleaned = -0.0046488 Jy ! Component: 3100 - total flux cleaned = -0.0046597 Jy ! Component: 3150 - total flux cleaned = -0.00463785 Jy ! Component: 3200 - total flux cleaned = -0.00464877 Jy ! Component: 3250 - total flux cleaned = -0.00462721 Jy ! Component: 3300 - total flux cleaned = -0.00468078 Jy ! Component: 3350 - total flux cleaned = -0.00463813 Jy ! Component: 3400 - total flux cleaned = -0.004712 Jy ! Component: 3450 - total flux cleaned = -0.0046385 Jy ! Component: 3500 - total flux cleaned = -0.00464888 Jy ! Component: 3550 - total flux cleaned = -0.0046903 Jy ! Component: 3600 - total flux cleaned = -0.00469024 Jy ! Component: 3650 - total flux cleaned = -0.00468002 Jy ! Component: 3700 - total flux cleaned = -0.00469023 Jy ! Component: 3750 - total flux cleaned = -0.0046802 Jy ! Component: 3800 - total flux cleaned = -0.00469026 Jy ! Component: 3850 - total flux cleaned = -0.00470018 Jy ! Component: 3900 - total flux cleaned = -0.00470018 Jy ! Component: 3950 - total flux cleaned = -0.00468059 Jy ! Component: 4000 - total flux cleaned = -0.00471964 Jy ! Component: 4050 - total flux cleaned = -0.0047585 Jy ! Total flux subtracted in 4096 components = -0.004826 Jy ! Clean residual min=-0.000693 max=0.000654 Jy/beam ! Clean residual mean=-0.000008 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.149586 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 398 components and 0.149586 Jy ![Exited script file: muppet] wmap "J0004+4615_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.117 x 6.816 at 49.47 degrees (North through East) ! Clean map min=-0.0015694 max=0.14495 Jy/beam ! Writing clean map to FITS file: J0004+4615_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144947 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017834 device "J0004+4615_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0004+4615_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.369113 0.369113 0.738225 1.47645 2.9529 5.9058 11.8116 23.6232 47.2464 94.4928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.117 x 6.816 at 49.47 degrees (North through East) ! Clean map min=-0.0015694 max=0.14495 Jy/beam quit ! Quitting program ! Log file J0004+4615_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:47:05 2016