! Started logfile: J2038+5119_L_2010_09_23_pus_uvs.log on Sun Jan 10 16:13:02 2016 obs J2038+5119_L_2010_09_23_pus_uva.fits ! Reading UV FITS file: J2038+5119_L_2010_09_23_pus_uva.fits ! AN table 1: 585 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.941406 visibilities/baseline/integration-bin. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 1.35446e+09 8e+06 1 8e+06 ! 02 2 1.36246e+09 8e+06 1 8e+06 ! 03 3 1.42646e+09 8e+06 1 8e+06 ! 04 4 1.43446e+09 8e+06 1 8e+06 ! ! Polarization(s): RR LL RL LR ! ! Read 748 lines of history. ! ! Reading 317216 visibilities. select I ! Selecting polarization: I, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 2048 print "field_cell =",field_cell ! field_cell = 0.8 print "taper_size =",taper_size ! taper_size = 15 ![@muppet J2038+5119_L_2010_09_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 2048x2048 pixels with 0.800x0.800 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025306Jy sigma=0.013279 ! Fit after self-cal, rms=1.009203Jy sigma=0.013079 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.945 mas, bmaj=7.291 mas, bpa=8.118 degrees ! Estimated noise=427.246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.922668 Jy ! Component: 100 - total flux cleaned = 1.39118 Jy ! Total flux subtracted in 100 components = 1.39118 Jy ! Clean residual min=-0.047242 max=0.255935 Jy/beam ! Clean residual mean=0.000104 rms=0.012816 Jy/beam ! Combined flux in latest and established models = 1.39118 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.39118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.731838Jy sigma=0.009639 ! Fit after self-cal, rms=0.730729Jy sigma=0.009629 ! Inverting map ! Added new window around map position (5.6, 5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299915 Jy ! Component: 100 - total flux cleaned = 0.499702 Jy ! Total flux subtracted in 100 components = 0.499702 Jy ! Clean residual min=-0.031747 max=0.152031 Jy/beam ! Clean residual mean=0.000073 rms=0.008159 Jy/beam ! Combined flux in latest and established models = 1.89089 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 1.89089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476399Jy sigma=0.006240 ! Fit after self-cal, rms=0.473712Jy sigma=0.006209 ! Inverting map ! Added new window around map position (-4.8, -11.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.163112 Jy ! Component: 100 - total flux cleaned = 0.282573 Jy ! Total flux subtracted in 100 components = 0.282573 Jy ! Clean residual min=-0.024509 max=0.069569 Jy/beam ! Clean residual mean=0.000055 rms=0.006042 Jy/beam ! Combined flux in latest and established models = 2.17346 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 2.17346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355222Jy sigma=0.004633 ! Fit after self-cal, rms=0.354093Jy sigma=0.004622 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0959819 Jy ! Component: 100 - total flux cleaned = 0.170751 Jy ! Total flux subtracted in 100 components = 0.170751 Jy ! Clean residual min=-0.022026 max=0.052042 Jy/beam ! Clean residual mean=0.000044 rms=0.005054 Jy/beam ! Combined flux in latest and established models = 2.34421 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 95 components and 2.34421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295513Jy sigma=0.003831 ! Fit after self-cal, rms=0.294489Jy sigma=0.003821 ! Inverting map ! Added new window around map position (-11.2, -16.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.065793 Jy ! Component: 100 - total flux cleaned = 0.117534 Jy ! Total flux subtracted in 100 components = 0.117534 Jy ! Clean residual min=-0.020554 max=0.041403 Jy/beam ! Clean residual mean=0.000036 rms=0.004512 Jy/beam ! Combined flux in latest and established models = 2.46174 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 113 components and 2.46174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261170Jy sigma=0.003371 ! Fit after self-cal, rms=0.260120Jy sigma=0.003359 ! Inverting map ! Added new window around map position (-11.2, -101.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050152 Jy ! Component: 100 - total flux cleaned = 0.0911055 Jy ! Total flux subtracted in 100 components = 0.0911055 Jy ! Clean residual min=-0.019520 max=0.040434 Jy/beam ! Clean residual mean=0.000034 rms=0.004133 Jy/beam ! Combined flux in latest and established models = 2.55285 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 2.55285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238150Jy sigma=0.003060 ! Fit after self-cal, rms=0.237407Jy sigma=0.003053 ! Inverting map ! Added new window around map position (-12.8, -34.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446799 Jy ! Component: 100 - total flux cleaned = 0.0802052 Jy ! Total flux subtracted in 100 components = 0.0802052 Jy ! Clean residual min=-0.018087 max=0.031821 Jy/beam ! Clean residual mean=0.000031 rms=0.003832 Jy/beam ! Combined flux in latest and established models = 2.63305 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 147 components and 2.63305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218921Jy sigma=0.002799 ! Fit after self-cal, rms=0.218249Jy sigma=0.002792 ! Inverting map ! Added new window around map position (-18.4, -108). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360747 Jy ! Component: 100 - total flux cleaned = 0.0667495 Jy ! Total flux subtracted in 100 components = 0.0667495 Jy ! Clean residual min=-0.016857 max=0.027585 Jy/beam ! Clean residual mean=0.000030 rms=0.003600 Jy/beam ! Combined flux in latest and established models = 2.6998 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 162 components and 2.6998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204258Jy sigma=0.002602 ! Fit after self-cal, rms=0.203861Jy sigma=0.002598 ! Inverting map ! Added new window around map position (-5.6, -28). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319611 Jy ! Component: 100 - total flux cleaned = 0.0587218 Jy ! Total flux subtracted in 100 components = 0.0587218 Jy ! Clean residual min=-0.016020 max=0.025404 Jy/beam ! Clean residual mean=0.000029 rms=0.003412 Jy/beam ! Combined flux in latest and established models = 2.75853 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 185 components and 2.75853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192331Jy sigma=0.002440 ! Fit after self-cal, rms=0.191881Jy sigma=0.002436 ! Inverting map ! Added new window around map position (9.6, -5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274967 Jy ! Component: 100 - total flux cleaned = 0.0512492 Jy ! Total flux subtracted in 100 components = 0.0512492 Jy ! Clean residual min=-0.014731 max=0.023328 Jy/beam ! Clean residual mean=0.000027 rms=0.003254 Jy/beam ! Combined flux in latest and established models = 2.80977 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 198 components and 2.80977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182837Jy sigma=0.002310 ! Fit after self-cal, rms=0.182552Jy sigma=0.002308 ! Inverting map ! Added new window around map position (3.2, -17.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244877 Jy ! Component: 100 - total flux cleaned = 0.0455097 Jy ! Total flux subtracted in 100 components = 0.0455097 Jy ! Clean residual min=-0.013897 max=0.022717 Jy/beam ! Clean residual mean=0.000025 rms=0.003123 Jy/beam ! Combined flux in latest and established models = 2.85528 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 211 components and 2.85528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175089Jy sigma=0.002203 ! Fit after self-cal, rms=0.174833Jy sigma=0.002200 ! Inverting map ! Added new window around map position (13.6, 14.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226508 Jy ! Component: 100 - total flux cleaned = 0.0388254 Jy ! Total flux subtracted in 100 components = 0.0388254 Jy ! Clean residual min=-0.013452 max=0.020161 Jy/beam ! Clean residual mean=0.000024 rms=0.003009 Jy/beam ! Combined flux in latest and established models = 2.89411 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 222 components and 2.89411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168841Jy sigma=0.002122 ! Fit after self-cal, rms=0.168752Jy sigma=0.002121 ! Inverting map ! Added new window around map position (-16.8, -122.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213359 Jy ! Component: 100 - total flux cleaned = 0.0355368 Jy ! Total flux subtracted in 100 components = 0.0355368 Jy ! Clean residual min=-0.012629 max=0.018156 Jy/beam ! Clean residual mean=0.000023 rms=0.002907 Jy/beam ! Combined flux in latest and established models = 2.92965 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 240 components and 2.92965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163208Jy sigma=0.002045 ! Fit after self-cal, rms=0.163061Jy sigma=0.002044 ! Inverting map ! Added new window around map position (-4.8, -98.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158499 Jy ! Component: 100 - total flux cleaned = 0.0282393 Jy ! Total flux subtracted in 100 components = 0.0282393 Jy ! Clean residual min=-0.012302 max=0.017485 Jy/beam ! Clean residual mean=0.000023 rms=0.002824 Jy/beam ! Combined flux in latest and established models = 2.95789 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 252 components and 2.95789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158887Jy sigma=0.001988 ! Fit after self-cal, rms=0.158767Jy sigma=0.001987 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.721 mas, bmaj=9.374 mas, bpa=8.041 degrees ! Estimated noise=205.552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.8, -87.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357376 Jy ! Component: 100 - total flux cleaned = 0.0661488 Jy ! Component: 150 - total flux cleaned = 0.0929667 Jy ! Component: 200 - total flux cleaned = 0.116849 Jy ! Total flux subtracted in 200 components = 0.116849 Jy ! Clean residual min=-0.014161 max=0.023148 Jy/beam ! Clean residual mean=0.000099 rms=0.003544 Jy/beam ! Combined flux in latest and established models = 3.07474 Jy ! Performing phase self-cal ! Adding 96 model components to the UV plane model. ! The established model now contains 316 components and 3.07474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144702Jy sigma=0.001789 ! Fit after self-cal, rms=0.144042Jy sigma=0.001782 ! Inverting map ! Added new window around map position (-10.4, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250421 Jy ! Component: 100 - total flux cleaned = 0.0465048 Jy ! Component: 150 - total flux cleaned = 0.0658318 Jy ! Component: 200 - total flux cleaned = 0.0833446 Jy ! Total flux subtracted in 200 components = 0.0833446 Jy ! Clean residual min=-0.013841 max=0.019374 Jy/beam ! Clean residual mean=0.000087 rms=0.003117 Jy/beam ! Combined flux in latest and established models = 3.15808 Jy ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 374 components and 3.15808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136322Jy sigma=0.001673 ! Fit after self-cal, rms=0.136010Jy sigma=0.001669 ! Inverting map ! Added new window around map position (-9.6, -52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211903 Jy ! Component: 100 - total flux cleaned = 0.0380222 Jy ! Component: 150 - total flux cleaned = 0.0532112 Jy ! Component: 200 - total flux cleaned = 0.0670466 Jy ! Total flux subtracted in 200 components = 0.0670466 Jy ! Clean residual min=-0.013811 max=0.016368 Jy/beam ! Clean residual mean=0.000080 rms=0.002815 Jy/beam ! Combined flux in latest and established models = 3.22513 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 421 components and 3.22513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130533Jy sigma=0.001594 ! Fit after self-cal, rms=0.130314Jy sigma=0.001592 ! Inverting map ! Added new window around map position (-28, -126.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167424 Jy ! Component: 100 - total flux cleaned = 0.0299051 Jy ! Component: 150 - total flux cleaned = 0.0418957 Jy ! Component: 200 - total flux cleaned = 0.0529483 Jy ! Total flux subtracted in 200 components = 0.0529483 Jy ! Clean residual min=-0.013318 max=0.012546 Jy/beam ! Clean residual mean=0.000074 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 3.27808 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 467 components and 3.27808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126732Jy sigma=0.001543 ! Fit after self-cal, rms=0.126568Jy sigma=0.001541 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 KP 1.00 LA 1.01 ! MK 1.01 NL 1.04 OV 0.98 PT 0.98 ! SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 KP 1.02 LA 1.05 ! MK 1.03 NL 1.02 OV 0.99 PT 0.95 ! SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 KP 0.90 LA 0.96 ! MK 0.91 NL 0.97 OV 1.01 PT 1.01 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 KP 0.97 LA 0.98 ! MK 0.93 NL 0.97 OV 1.02 PT 1.00 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.126568Jy sigma=0.001541 ! Fit after self-cal, rms=0.087625Jy sigma=0.001020 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.724 mas, bmaj=9.396 mas, bpa=7.585 degrees ! Estimated noise=205.819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -116). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435684 Jy ! Component: 100 - total flux cleaned = 0.0101945 Jy ! Component: 150 - total flux cleaned = 0.0163698 Jy ! Component: 200 - total flux cleaned = 0.02185 Jy ! Total flux subtracted in 200 components = 0.02185 Jy ! Clean residual min=-0.006726 max=0.007975 Jy/beam ! Clean residual mean=0.000055 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 3.29993 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 506 components and 3.29993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083939Jy sigma=0.000972 ! Fit after self-cal, rms=0.083740Jy sigma=0.000969 ! Inverting map ! Added new window around map position (3.2, -93.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571374 Jy ! Component: 100 - total flux cleaned = 0.0115336 Jy ! Component: 150 - total flux cleaned = 0.0160315 Jy ! Component: 200 - total flux cleaned = 0.0199166 Jy ! Total flux subtracted in 200 components = 0.0199166 Jy ! Clean residual min=-0.006225 max=0.007929 Jy/beam ! Clean residual mean=0.000055 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 3.31984 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 538 components and 3.31984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082025Jy sigma=0.000947 ! Fit after self-cal, rms=0.081948Jy sigma=0.000946 ! Inverting map ! Added new window around map position (-71.2, -222.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851639 Jy ! Component: 100 - total flux cleaned = 0.0135583 Jy ! Component: 150 - total flux cleaned = 0.0172571 Jy ! Component: 200 - total flux cleaned = 0.0203195 Jy ! Total flux subtracted in 200 components = 0.0203195 Jy ! Clean residual min=-0.006010 max=0.007280 Jy/beam ! Clean residual mean=0.000051 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 3.34016 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 575 components and 3.34016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080529Jy sigma=0.000927 ! Fit after self-cal, rms=0.080449Jy sigma=0.000926 ! Inverting map ! Added new window around map position (-84, -198.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819884 Jy ! Component: 100 - total flux cleaned = 0.0126442 Jy ! Component: 150 - total flux cleaned = 0.01609 Jy ! Component: 200 - total flux cleaned = 0.019153 Jy ! Total flux subtracted in 200 components = 0.019153 Jy ! Clean residual min=-0.005489 max=0.006969 Jy/beam ! Clean residual mean=0.000047 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 3.35932 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 609 components and 3.35932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079128Jy sigma=0.000908 ! Fit after self-cal, rms=0.079041Jy sigma=0.000907 ! Inverting map ! Added new window around map position (-136, -130.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00622304 Jy ! Component: 100 - total flux cleaned = 0.00969821 Jy ! Component: 150 - total flux cleaned = 0.0127914 Jy ! Component: 200 - total flux cleaned = 0.0155727 Jy ! Total flux subtracted in 200 components = 0.0155727 Jy ! Clean residual min=-0.005330 max=0.006800 Jy/beam ! Clean residual mean=0.000046 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 3.37489 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 637 components and 3.37489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078033Jy sigma=0.000894 ! Fit after self-cal, rms=0.077977Jy sigma=0.000894 ! Inverting map ! Added new window around map position (-72.8, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618952 Jy ! Component: 100 - total flux cleaned = 0.0097299 Jy ! Component: 150 - total flux cleaned = 0.0125766 Jy ! Component: 200 - total flux cleaned = 0.0153112 Jy ! Total flux subtracted in 200 components = 0.0153112 Jy ! Clean residual min=-0.005104 max=0.005683 Jy/beam ! Clean residual mean=0.000043 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 3.3902 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 668 components and 3.3902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077090Jy sigma=0.000882 ! Fit after self-cal, rms=0.077060Jy sigma=0.000882 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077060Jy sigma=0.000882 ! Fit after self-cal, rms=0.074236Jy sigma=0.000854 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.724 mas, bmaj=9.405 mas, bpa=7.701 degrees ! Estimated noise=205.761 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00433975 Jy ! Component: 100 - total flux cleaned = -0.00367658 Jy ! Component: 150 - total flux cleaned = -0.00178943 Jy ! Component: 200 - total flux cleaned = 0.000149662 Jy ! Total flux subtracted in 200 components = 0.000149662 Jy ! Clean residual min=-0.004307 max=0.005037 Jy/beam ! Clean residual mean=0.000044 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 3.39035 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 695 components and 3.39035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073441Jy sigma=0.000845 ! Fit after self-cal, rms=0.073404Jy sigma=0.000845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-170.4, -163.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382446 Jy ! Component: 100 - total flux cleaned = 0.00520131 Jy ! Component: 150 - total flux cleaned = 0.00723452 Jy ! Component: 200 - total flux cleaned = 0.00891665 Jy ! Total flux subtracted in 200 components = 0.00891665 Jy ! Clean residual min=-0.004265 max=0.004417 Jy/beam ! Clean residual mean=0.000044 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 3.39927 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 720 components and 3.39927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072745Jy sigma=0.000837 ! Fit after self-cal, rms=0.072716Jy sigma=0.000837 ! Inverting map ! Added new window around map position (-96.8, -228.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455291 Jy ! Component: 100 - total flux cleaned = 0.00716398 Jy ! Component: 150 - total flux cleaned = 0.00894305 Jy ! Component: 200 - total flux cleaned = 0.0107919 Jy ! Total flux subtracted in 200 components = 0.0107919 Jy ! Clean residual min=-0.004210 max=0.004320 Jy/beam ! Clean residual mean=0.000042 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 3.41006 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 744 components and 3.41006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072159Jy sigma=0.000830 ! Fit after self-cal, rms=0.072132Jy sigma=0.000830 ! Inverting map ! Added new window around map position (-158.4, -132.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453761 Jy ! Component: 100 - total flux cleaned = 0.00634067 Jy ! Component: 150 - total flux cleaned = 0.00792563 Jy ! Component: 200 - total flux cleaned = 0.00946159 Jy ! Total flux subtracted in 200 components = 0.00946159 Jy ! Clean residual min=-0.004089 max=0.004236 Jy/beam ! Clean residual mean=0.000042 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 3.41952 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 769 components and 3.41952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071569Jy sigma=0.000823 ! Fit after self-cal, rms=0.071544Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071544Jy sigma=0.000823 ! Fit after self-cal, rms=0.069651Jy sigma=0.000806 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.695 mas, bmaj=9.373 mas, bpa=7.596 degrees ! Estimated noise=204.916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110787 Jy ! Component: 100 - total flux cleaned = -6.40385e-05 Jy ! Component: 150 - total flux cleaned = 0.000924369 Jy ! Component: 200 - total flux cleaned = 0.00187096 Jy ! Total flux subtracted in 200 components = 0.00187096 Jy ! Clean residual min=-0.004153 max=0.004064 Jy/beam ! Clean residual mean=0.000021 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 3.42139 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 798 components and 3.42139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069159Jy sigma=0.000801 ! Fit after self-cal, rms=0.069146Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937683 Jy ! Component: 100 - total flux cleaned = 0.00195503 Jy ! Component: 150 - total flux cleaned = 0.00314834 Jy ! Component: 200 - total flux cleaned = 0.00399015 Jy ! Total flux subtracted in 200 components = 0.00399015 Jy ! Clean residual min=-0.003972 max=0.003988 Jy/beam ! Clean residual mean=0.000021 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 3.42538 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 822 components and 3.42538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068800Jy sigma=0.000798 ! Fit after self-cal, rms=0.068789Jy sigma=0.000798 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068789Jy sigma=0.000798 ! Fit after self-cal, rms=0.068782Jy sigma=0.000797 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.73 mas, bmaj=14.52 mas, bpa=13.55 degrees ! Estimated noise=227.383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137071 Jy ! Component: 100 - total flux cleaned = 0.00373645 Jy ! Component: 150 - total flux cleaned = 0.00612669 Jy ! Component: 200 - total flux cleaned = 0.00821437 Jy ! Total flux subtracted in 200 components = 0.00821437 Jy ! Clean residual min=-0.003233 max=0.003789 Jy/beam ! Clean residual mean=0.000031 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 3.43359 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 859 components and 3.43359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068575Jy sigma=0.000794 ! Fit after self-cal, rms=0.068561Jy sigma=0.000794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014103 Jy ! Component: 100 - total flux cleaned = 0.00305173 Jy ! Component: 150 - total flux cleaned = 0.00459904 Jy ! Component: 200 - total flux cleaned = 0.00597129 Jy ! Total flux subtracted in 200 components = 0.00597129 Jy ! Clean residual min=-0.003235 max=0.003722 Jy/beam ! Clean residual mean=0.000030 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 3.43957 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 892 components and 3.43957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068421Jy sigma=0.000791 ! Fit after self-cal, rms=0.068415Jy sigma=0.000791 ! Inverting map ! Added new window around map position (-72, -175.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409673 Jy ! Component: 100 - total flux cleaned = 0.00635005 Jy ! Component: 150 - total flux cleaned = 0.00809352 Jy ! Component: 200 - total flux cleaned = 0.00953973 Jy ! Total flux subtracted in 200 components = 0.00953973 Jy ! Clean residual min=-0.002954 max=0.003449 Jy/beam ! Clean residual mean=0.000026 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 3.44911 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 946 components and 3.44911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068171Jy sigma=0.000788 ! Fit after self-cal, rms=0.068156Jy sigma=0.000788 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.697 mas, bmaj=9.377 mas, bpa=7.673 degrees ! Estimated noise=204.949 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.697 x 9.377 at 7.673 degrees (North through East) ! Clean map min=-0.0033935 max=1.1624 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068156Jy sigma=0.000788 ! Fit after self-cal, rms=0.064015Jy sigma=0.000727 ! Inverting map and beam ! Estimated beam: bmin=6.698 mas, bmaj=9.375 mas, bpa=7.686 degrees ! Estimated noise=204.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584746 Jy ! Component: 100 - total flux cleaned = 0.000917342 Jy ! Component: 150 - total flux cleaned = 0.00143964 Jy ! Component: 200 - total flux cleaned = 0.00213176 Jy ! Total flux subtracted in 200 components = 0.00213176 Jy ! Clean residual min=-0.003573 max=0.003698 Jy/beam ! Clean residual mean=0.000015 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 3.45124 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 970 components and 3.45124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063625Jy sigma=0.000724 ! Fit after self-cal, rms=0.063612Jy sigma=0.000724 ! Inverting map ! Added new window around map position (-33.6, -21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241597 Jy ! Component: 100 - total flux cleaned = 0.00271275 Jy ! Component: 150 - total flux cleaned = 0.00319194 Jy ! Component: 200 - total flux cleaned = 0.00365994 Jy ! Total flux subtracted in 200 components = 0.00365994 Jy ! Clean residual min=-0.003546 max=0.003553 Jy/beam ! Clean residual mean=0.000015 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 3.4549 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 992 components and 3.4549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063255Jy sigma=0.000720 ! Fit after self-cal, rms=0.063240Jy sigma=0.000720 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063240Jy sigma=0.000720 ! Fit after self-cal, rms=0.063206Jy sigma=0.000719 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.921 mas, bmaj=7.293 mas, bpa=7.847 degrees ! Estimated noise=426.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.927098 Jy ! Component: 100 - total flux cleaned = 1.39575 Jy ! Component: 150 - total flux cleaned = 1.69273 Jy ! Component: 200 - total flux cleaned = 1.90051 Jy ! Total flux subtracted in 200 components = 1.90051 Jy ! Clean residual min=-0.026493 max=0.118385 Jy/beam ! Clean residual mean=0.000066 rms=0.007724 Jy/beam ! Combined flux in latest and established models = 1.90051 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 1.90051 Jy ! Inverting map and beam ! Estimated beam: bmin=6.699 mas, bmaj=9.378 mas, bpa=7.737 degrees ! Estimated noise=204.931 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28034 Jy ! Component: 100 - total flux cleaned = 0.460003 Jy ! Component: 150 - total flux cleaned = 0.587749 Jy ! Component: 200 - total flux cleaned = 0.687244 Jy ! Total flux subtracted in 200 components = 0.687244 Jy ! Clean residual min=-0.022837 max=0.060188 Jy/beam ! Clean residual mean=0.000148 rms=0.006792 Jy/beam ! Combined flux in latest and established models = 2.58776 Jy ! Adding 124 model components to the UV plane model. ! The established model now contains 167 components and 2.58776 Jy ! Inverting map ! Added new window around map position (-4.8, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0811705 Jy ! Component: 100 - total flux cleaned = 0.148789 Jy ! Component: 150 - total flux cleaned = 0.20603 Jy ! Component: 200 - total flux cleaned = 0.25563 Jy ! Total flux subtracted in 200 components = 0.25563 Jy ! Clean residual min=-0.014556 max=0.031058 Jy/beam ! Clean residual mean=0.000104 rms=0.004331 Jy/beam ! Combined flux in latest and established models = 2.84339 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 272 components and 2.84339 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435972 Jy ! Component: 100 - total flux cleaned = 0.0822377 Jy ! Component: 150 - total flux cleaned = 0.116741 Jy ! Component: 200 - total flux cleaned = 0.147738 Jy ! Total flux subtracted in 200 components = 0.147738 Jy ! Clean residual min=-0.010669 max=0.019693 Jy/beam ! Clean residual mean=0.000083 rms=0.003118 Jy/beam ! Combined flux in latest and established models = 2.99112 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 374 components and 2.99113 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279932 Jy ! Component: 100 - total flux cleaned = 0.0533818 Jy ! Component: 150 - total flux cleaned = 0.0765105 Jy ! Component: 200 - total flux cleaned = 0.0976638 Jy ! Total flux subtracted in 200 components = 0.0976638 Jy ! Clean residual min=-0.008616 max=0.014183 Jy/beam ! Clean residual mean=0.000070 rms=0.002402 Jy/beam ! Combined flux in latest and established models = 3.08879 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 454 components and 3.08879 Jy ! Inverting map ! Added new window around map position (-18.4, -67.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194432 Jy ! Component: 100 - total flux cleaned = 0.0372665 Jy ! Component: 150 - total flux cleaned = 0.0536718 Jy ! Component: 200 - total flux cleaned = 0.0688102 Jy ! Total flux subtracted in 200 components = 0.0688102 Jy ! Clean residual min=-0.007204 max=0.010468 Jy/beam ! Clean residual mean=0.000060 rms=0.001956 Jy/beam ! Combined flux in latest and established models = 3.1576 Jy ! Adding 114 model components to the UV plane model. ! The established model now contains 537 components and 3.1576 Jy ! Inverting map ! Added new window around map position (-18.4, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141388 Jy ! Component: 100 - total flux cleaned = 0.0272961 Jy ! Component: 150 - total flux cleaned = 0.0396163 Jy ! Component: 200 - total flux cleaned = 0.0511724 Jy ! Total flux subtracted in 200 components = 0.0511724 Jy ! Clean residual min=-0.006252 max=0.008155 Jy/beam ! Clean residual mean=0.000052 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 3.20877 Jy ! Adding 114 model components to the UV plane model. ! The established model now contains 598 components and 3.20877 Jy ! Inverting map ! Added new window around map position (-83.2, -223.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109456 Jy ! Component: 100 - total flux cleaned = 0.021236 Jy ! Component: 150 - total flux cleaned = 0.030997 Jy ! Component: 200 - total flux cleaned = 0.0391868 Jy ! Total flux subtracted in 200 components = 0.0391868 Jy ! Clean residual min=-0.005986 max=0.006672 Jy/beam ! Clean residual mean=0.000046 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 3.24796 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 659 components and 3.24796 Jy ! Inverting map ! Added new window around map position (-97.6, -213.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754274 Jy ! Component: 100 - total flux cleaned = 0.015091 Jy ! Component: 150 - total flux cleaned = 0.0220175 Jy ! Component: 200 - total flux cleaned = 0.0286819 Jy ! Total flux subtracted in 200 components = 0.0286819 Jy ! Clean residual min=-0.005063 max=0.005905 Jy/beam ! Clean residual mean=0.000042 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 3.27664 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 697 components and 3.27664 Jy ! Inverting map ! Added new window around map position (1.6, 14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648824 Jy ! Component: 100 - total flux cleaned = 0.0129877 Jy ! Component: 150 - total flux cleaned = 0.0192629 Jy ! Component: 200 - total flux cleaned = 0.0250491 Jy ! Total flux subtracted in 200 components = 0.0250491 Jy ! Clean residual min=-0.004597 max=0.005287 Jy/beam ! Clean residual mean=0.000038 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 3.30169 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 747 components and 3.30169 Jy ! Inverting map ! Added new window around map position (-27.2, -108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595667 Jy ! Component: 100 - total flux cleaned = 0.0116408 Jy ! Component: 150 - total flux cleaned = 0.0168927 Jy ! Component: 200 - total flux cleaned = 0.0222203 Jy ! Total flux subtracted in 200 components = 0.0222203 Jy ! Clean residual min=-0.004281 max=0.004955 Jy/beam ! Clean residual mean=0.000035 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 3.32391 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 791 components and 3.32391 Jy ! Inverting map ! Added new window around map position (-52.8, -224). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510366 Jy ! Component: 100 - total flux cleaned = 0.0101447 Jy ! Component: 150 - total flux cleaned = 0.0148054 Jy ! Component: 200 - total flux cleaned = 0.0193349 Jy ! Total flux subtracted in 200 components = 0.0193349 Jy ! Clean residual min=-0.004055 max=0.004216 Jy/beam ! Clean residual mean=0.000032 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 3.34324 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 838 components and 3.34324 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.73 mas, bmaj=14.53 mas, bpa=13.59 degrees ! Estimated noise=227.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774322 Jy ! Component: 100 - total flux cleaned = 0.014683 Jy ! Component: 150 - total flux cleaned = 0.0210761 Jy ! Component: 200 - total flux cleaned = 0.027035 Jy ! Total flux subtracted in 200 components = 0.027035 Jy ! Clean residual min=-0.003831 max=0.004534 Jy/beam ! Clean residual mean=0.000047 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 3.37028 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558908 Jy ! Component: 100 - total flux cleaned = 0.0108642 Jy ! Component: 150 - total flux cleaned = 0.0158533 Jy ! Component: 200 - total flux cleaned = 0.0205819 Jy ! Total flux subtracted in 200 components = 0.0205819 Jy ! Clean residual min=-0.003463 max=0.004159 Jy/beam ! Clean residual mean=0.000041 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 3.39086 Jy ! Adding 214 model components to the UV plane model. ! The established model now contains 1020 components and 3.39086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.699 mas, bmaj=9.378 mas, bpa=7.737 degrees ! Estimated noise=204.931 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110542 Jy ! Component: 100 - total flux cleaned = 0.00286231 Jy ! Component: 150 - total flux cleaned = 0.00486056 Jy ! Component: 200 - total flux cleaned = 0.00707977 Jy ! Total flux subtracted in 200 components = 0.00707977 Jy ! Clean residual min=-0.003552 max=0.003385 Jy/beam ! Clean residual mean=0.000024 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 3.39794 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 1041 components and 3.39794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065322Jy sigma=0.000740 ! Fit after self-cal, rms=0.063761Jy sigma=0.000731 wmodel J2038+5119_L_2010_09_23_pus_map.mod ! Writing 1041 model components to file: J2038+5119_L_2010_09_23_pus_map.mod wobs J2038+5119_L_2010_09_23_pus_uvs.fits ! Writing UV FITS file: J2038+5119_L_2010_09_23_pus_uvs.fits wwins J2038+5119_L_2010_09_23_pus_map.win ! wwins: Wrote 36 windows to J2038+5119_L_2010_09_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=8192 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135257 Jy ! Component: 100 - total flux cleaned = 0.000105879 Jy ! Component: 150 - total flux cleaned = 0.000165647 Jy ! Component: 200 - total flux cleaned = 0.000452879 Jy ! Component: 250 - total flux cleaned = 0.000340408 Jy ! Component: 300 - total flux cleaned = 0.000341076 Jy ! Component: 350 - total flux cleaned = 0.000178448 Jy ! Component: 400 - total flux cleaned = 0.000179596 Jy ! Component: 450 - total flux cleaned = 0.000126793 Jy ! Component: 500 - total flux cleaned = 0.000232439 Jy ! Component: 550 - total flux cleaned = 0.000180577 Jy ! Component: 600 - total flux cleaned = 0.000232274 Jy ! Component: 650 - total flux cleaned = 0.0002836 Jy ! Component: 700 - total flux cleaned = 0.000183016 Jy ! Component: 750 - total flux cleaned = 0.000332399 Jy ! Component: 800 - total flux cleaned = 0.000282493 Jy ! Component: 850 - total flux cleaned = 0.000429741 Jy ! Component: 900 - total flux cleaned = 0.000575386 Jy ! Component: 950 - total flux cleaned = 0.000671725 Jy ! Component: 1000 - total flux cleaned = 0.000719819 Jy ! Component: 1050 - total flux cleaned = 0.000909759 Jy ! Component: 1100 - total flux cleaned = 0.000957544 Jy ! Component: 1150 - total flux cleaned = 0.00114465 Jy ! Component: 1200 - total flux cleaned = 0.00114458 Jy ! Component: 1250 - total flux cleaned = 0.00151488 Jy ! Component: 1300 - total flux cleaned = 0.00146937 Jy ! Component: 1350 - total flux cleaned = 0.00174436 Jy ! Component: 1400 - total flux cleaned = 0.00206279 Jy ! Component: 1450 - total flux cleaned = 0.00233407 Jy ! Component: 1500 - total flux cleaned = 0.00237904 Jy ! Component: 1550 - total flux cleaned = 0.0026025 Jy ! Component: 1600 - total flux cleaned = 0.00291321 Jy ! Component: 1650 - total flux cleaned = 0.00308945 Jy ! Component: 1700 - total flux cleaned = 0.0033527 Jy ! Component: 1750 - total flux cleaned = 0.00335318 Jy ! Component: 1800 - total flux cleaned = 0.00365694 Jy ! Component: 1850 - total flux cleaned = 0.00382967 Jy ! Component: 1900 - total flux cleaned = 0.00408743 Jy ! Component: 1950 - total flux cleaned = 0.00413 Jy ! Component: 2000 - total flux cleaned = 0.0041724 Jy ! Component: 2050 - total flux cleaned = 0.00451075 Jy ! Component: 2100 - total flux cleaned = 0.00442669 Jy ! Component: 2150 - total flux cleaned = 0.00471961 Jy ! Component: 2200 - total flux cleaned = 0.00480279 Jy ! Component: 2250 - total flux cleaned = 0.00505147 Jy ! Component: 2300 - total flux cleaned = 0.00521664 Jy ! Component: 2350 - total flux cleaned = 0.00542189 Jy ! Component: 2400 - total flux cleaned = 0.00562612 Jy ! Component: 2450 - total flux cleaned = 0.00566662 Jy ! Component: 2500 - total flux cleaned = 0.00586928 Jy ! Component: 2550 - total flux cleaned = 0.0061109 Jy ! Component: 2600 - total flux cleaned = 0.00619103 Jy ! Component: 2650 - total flux cleaned = 0.00631076 Jy ! Component: 2700 - total flux cleaned = 0.00654923 Jy ! Component: 2750 - total flux cleaned = 0.006826 Jy ! Component: 2800 - total flux cleaned = 0.00706236 Jy ! Component: 2850 - total flux cleaned = 0.00702272 Jy ! Component: 2900 - total flux cleaned = 0.00717917 Jy ! Component: 2950 - total flux cleaned = 0.00729583 Jy ! Component: 3000 - total flux cleaned = 0.00756696 Jy ! Component: 3050 - total flux cleaned = 0.00756673 Jy ! Component: 3100 - total flux cleaned = 0.00787383 Jy ! Component: 3150 - total flux cleaned = 0.00791194 Jy ! Component: 3200 - total flux cleaned = 0.00814048 Jy ! Component: 3250 - total flux cleaned = 0.00825405 Jy ! Component: 3300 - total flux cleaned = 0.00836745 Jy ! Component: 3350 - total flux cleaned = 0.00832996 Jy ! Component: 3400 - total flux cleaned = 0.00862968 Jy ! Component: 3450 - total flux cleaned = 0.0087789 Jy ! Component: 3500 - total flux cleaned = 0.00870471 Jy ! Component: 3550 - total flux cleaned = 0.00888967 Jy ! Component: 3600 - total flux cleaned = 0.0088526 Jy ! Component: 3650 - total flux cleaned = 0.00910977 Jy ! Component: 3700 - total flux cleaned = 0.00914631 Jy ! Component: 3750 - total flux cleaned = 0.00918291 Jy ! Component: 3800 - total flux cleaned = 0.00911023 Jy ! Component: 3850 - total flux cleaned = 0.00932773 Jy ! Component: 3900 - total flux cleaned = 0.00947202 Jy ! Component: 3950 - total flux cleaned = 0.00957999 Jy ! Component: 4000 - total flux cleaned = 0.00968751 Jy ! Component: 4050 - total flux cleaned = 0.00958048 Jy ! Component: 4100 - total flux cleaned = 0.0097583 Jy ! Component: 4150 - total flux cleaned = 0.00975849 Jy ! Component: 4200 - total flux cleaned = 0.00965265 Jy ! Component: 4250 - total flux cleaned = 0.00982862 Jy ! Component: 4300 - total flux cleaned = 0.00979375 Jy ! Component: 4350 - total flux cleaned = 0.00986385 Jy ! Component: 4400 - total flux cleaned = 0.0100381 Jy ! Component: 4450 - total flux cleaned = 0.0101422 Jy ! Component: 4500 - total flux cleaned = 0.0102115 Jy ! Component: 4550 - total flux cleaned = 0.0101424 Jy ! Component: 4600 - total flux cleaned = 0.0104173 Jy ! Component: 4650 - total flux cleaned = 0.0104858 Jy ! Component: 4700 - total flux cleaned = 0.0104859 Jy ! Component: 4750 - total flux cleaned = 0.0103497 Jy ! Component: 4800 - total flux cleaned = 0.0104854 Jy ! Component: 4850 - total flux cleaned = 0.0105869 Jy ! Component: 4900 - total flux cleaned = 0.0107893 Jy ! Component: 4950 - total flux cleaned = 0.0107557 Jy ! Component: 5000 - total flux cleaned = 0.0108227 Jy ! Component: 5050 - total flux cleaned = 0.0110231 Jy ! Component: 5100 - total flux cleaned = 0.0110561 Jy ! Component: 5150 - total flux cleaned = 0.0111226 Jy ! Component: 5200 - total flux cleaned = 0.0111556 Jy ! Component: 5250 - total flux cleaned = 0.0113535 Jy ! Component: 5300 - total flux cleaned = 0.0113863 Jy ! Component: 5350 - total flux cleaned = 0.0114519 Jy ! Component: 5400 - total flux cleaned = 0.0113865 Jy ! Component: 5450 - total flux cleaned = 0.0115168 Jy ! Component: 5500 - total flux cleaned = 0.0116141 Jy ! Component: 5550 - total flux cleaned = 0.011711 Jy ! Component: 5600 - total flux cleaned = 0.0117431 Jy ! Component: 5650 - total flux cleaned = 0.0117431 Jy ! Component: 5700 - total flux cleaned = 0.0119354 Jy ! Component: 5750 - total flux cleaned = 0.0120634 Jy ! Component: 5800 - total flux cleaned = 0.0123183 Jy ! Component: 5850 - total flux cleaned = 0.0125091 Jy ! Component: 5900 - total flux cleaned = 0.0125091 Jy ! Component: 5950 - total flux cleaned = 0.0124775 Jy ! Component: 6000 - total flux cleaned = 0.0125406 Jy ! Component: 6050 - total flux cleaned = 0.0127289 Jy ! Component: 6100 - total flux cleaned = 0.0128853 Jy ! Component: 6150 - total flux cleaned = 0.0129791 Jy ! Component: 6200 - total flux cleaned = 0.0131038 Jy ! Component: 6250 - total flux cleaned = 0.0132279 Jy ! Component: 6300 - total flux cleaned = 0.0131041 Jy ! Component: 6350 - total flux cleaned = 0.0132276 Jy ! Component: 6400 - total flux cleaned = 0.0133507 Jy ! Component: 6450 - total flux cleaned = 0.0136267 Jy ! Component: 6500 - total flux cleaned = 0.0135654 Jy ! Component: 6550 - total flux cleaned = 0.0135348 Jy ! Component: 6600 - total flux cleaned = 0.013565 Jy ! Component: 6650 - total flux cleaned = 0.0138683 Jy ! Component: 6700 - total flux cleaned = 0.0139593 Jy ! Component: 6750 - total flux cleaned = 0.0141405 Jy ! Component: 6800 - total flux cleaned = 0.0140202 Jy ! Component: 6850 - total flux cleaned = 0.0142902 Jy ! Component: 6900 - total flux cleaned = 0.0142603 Jy ! Component: 6950 - total flux cleaned = 0.0142007 Jy ! Component: 7000 - total flux cleaned = 0.0143792 Jy ! Component: 7050 - total flux cleaned = 0.0143198 Jy ! Component: 7100 - total flux cleaned = 0.0144677 Jy ! Component: 7150 - total flux cleaned = 0.0145561 Jy ! Component: 7200 - total flux cleaned = 0.0147327 Jy ! Component: 7250 - total flux cleaned = 0.014674 Jy ! Component: 7300 - total flux cleaned = 0.0148494 Jy ! Component: 7350 - total flux cleaned = 0.0148492 Jy ! Component: 7400 - total flux cleaned = 0.0148493 Jy ! Component: 7450 - total flux cleaned = 0.0149074 Jy ! Component: 7500 - total flux cleaned = 0.0149653 Jy ! Component: 7550 - total flux cleaned = 0.0149941 Jy ! Component: 7600 - total flux cleaned = 0.0150519 Jy ! Component: 7650 - total flux cleaned = 0.0151093 Jy ! Component: 7700 - total flux cleaned = 0.0151665 Jy ! Component: 7750 - total flux cleaned = 0.0153665 Jy ! Component: 7800 - total flux cleaned = 0.0155089 Jy ! Component: 7850 - total flux cleaned = 0.0155089 Jy ! Component: 7900 - total flux cleaned = 0.0153955 Jy ! Component: 7950 - total flux cleaned = 0.0155368 Jy ! Component: 8000 - total flux cleaned = 0.0156778 Jy ! Component: 8050 - total flux cleaned = 0.0155935 Jy ! Component: 8100 - total flux cleaned = 0.0156496 Jy ! Component: 8150 - total flux cleaned = 0.0156216 Jy ! Total flux subtracted in 8192 components = 0.0157333 Jy ! Clean residual min=-0.001397 max=0.001472 Jy/beam ! Clean residual mean=0.000013 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 3.41367 Jy keep ! Adding 709 model components to the UV plane model. ! The established model now contains 1728 components and 3.41368 Jy ![Exited script file: muppet] wmap "J2038+5119_L_2010_09_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.699 x 9.378 at 7.737 degrees (North through East) ! Clean map min=-0.0026031 max=1.1704 Jy/beam ! Writing clean map to FITS file: J2038+5119_L_2010_09_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.17036 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000498152 device "J2038+5119_L_2010_09_23_pus\_map.eps/VPS" ! Attempting to open device: 'J2038+5119_L_2010_09_23_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.127692 0.127692 0.255385 0.51077 1.02154 2.04308 4.08616 8.17232 16.3446 32.6893 65.3786 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.699 x 9.378 at 7.737 degrees (North through East) ! Clean map min=-0.0026031 max=1.1704 Jy/beam quit ! Quitting program ! Log file J2038+5119_L_2010_09_23_pus_uvs.log closed on Sun Jan 10 16:15:11 2016