! Started logfile: J1927+7358_L_2010_05_21_pus_uvs.log on Wed Jan 6 22:17:35 2016 obs J1927+7358_L_2010_05_21_pus_uva.fits ! Reading UV FITS file: J1927+7358_L_2010_05_21_pus_uva.fits ! AN table 1: 573 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1927+7358 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 1.35446e+09 8e+06 1 8e+06 ! 02 2 1.36246e+09 8e+06 1 8e+06 ! 03 3 1.42646e+09 8e+06 1 8e+06 ! 04 4 1.43446e+09 8e+06 1 8e+06 ! ! Polarization(s): RR LL RL LR ! ! Read 744 lines of history. ! ! Reading 330048 visibilities. select I ! Selecting polarization: I, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.8 print "taper_size =",taper_size ! taper_size = 15 ![@muppet J1927+7358_L_2010_05_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.800x0.800 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 573 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 573 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 573 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 573 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.305909Jy sigma=0.016976 ! Fit after self-cal, rms=1.300978Jy sigma=0.016923 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.19 mas, bmaj=6.15 mas, bpa=42.01 degrees ! Estimated noise=457.133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.42409 Jy ! Component: 100 - total flux cleaned = 1.92281 Jy ! Total flux subtracted in 100 components = 1.92281 Jy ! Clean residual min=-0.047931 max=0.252881 Jy/beam ! Clean residual mean=-0.000433 rms=0.014217 Jy/beam ! Combined flux in latest and established models = 1.92281 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.92281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.665065Jy sigma=0.008632 ! Fit after self-cal, rms=0.664051Jy sigma=0.008621 ! Inverting map ! Added new window around map position (0.8, -13.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273972 Jy ! Component: 100 - total flux cleaned = 0.450466 Jy ! Total flux subtracted in 100 components = 0.450466 Jy ! Clean residual min=-0.028987 max=0.104865 Jy/beam ! Clean residual mean=-0.000296 rms=0.009060 Jy/beam ! Combined flux in latest and established models = 2.37328 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 2.37328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443997Jy sigma=0.005640 ! Fit after self-cal, rms=0.435267Jy sigma=0.005545 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140543 Jy ! Component: 100 - total flux cleaned = 0.237564 Jy ! Total flux subtracted in 100 components = 0.237564 Jy ! Clean residual min=-0.024867 max=0.084872 Jy/beam ! Clean residual mean=-0.000224 rms=0.006652 Jy/beam ! Combined flux in latest and established models = 2.61084 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 39 components and 2.61084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338094Jy sigma=0.004193 ! Fit after self-cal, rms=0.334384Jy sigma=0.004153 ! Inverting map ! Added new window around map position (0, -21.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.092059 Jy ! Component: 100 - total flux cleaned = 0.156043 Jy ! Total flux subtracted in 100 components = 0.156043 Jy ! Clean residual min=-0.020749 max=0.043498 Jy/beam ! Clean residual mean=-0.000175 rms=0.005383 Jy/beam ! Combined flux in latest and established models = 2.76689 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 2.76689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282692Jy sigma=0.003423 ! Fit after self-cal, rms=0.280124Jy sigma=0.003393 ! Inverting map ! Added new window around map position (1.6, -8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.056052 Jy ! Component: 100 - total flux cleaned = 0.0981198 Jy ! Total flux subtracted in 100 components = 0.0981198 Jy ! Clean residual min=-0.018177 max=0.032171 Jy/beam ! Clean residual mean=-0.000143 rms=0.004796 Jy/beam ! Combined flux in latest and established models = 2.86501 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 2.86501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254438Jy sigma=0.003019 ! Fit after self-cal, rms=0.253461Jy sigma=0.003007 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371813 Jy ! Component: 100 - total flux cleaned = 0.0666931 Jy ! Total flux subtracted in 100 components = 0.0666931 Jy ! Clean residual min=-0.017255 max=0.027824 Jy/beam ! Clean residual mean=-0.000121 rms=0.004507 Jy/beam ! Combined flux in latest and established models = 2.9317 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 78 components and 2.9317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240070Jy sigma=0.002807 ! Fit after self-cal, rms=0.239577Jy sigma=0.002801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.872 mas, bmaj=8.027 mas, bpa=41.01 degrees ! Estimated noise=199.554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596102 Jy ! Component: 100 - total flux cleaned = 0.0993869 Jy ! Component: 150 - total flux cleaned = 0.127527 Jy ! Component: 200 - total flux cleaned = 0.147806 Jy ! Total flux subtracted in 200 components = 0.147806 Jy ! Clean residual min=-0.014778 max=0.028315 Jy/beam ! Clean residual mean=-0.000354 rms=0.003952 Jy/beam ! Combined flux in latest and established models = 3.0795 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 114 components and 3.0795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223040Jy sigma=0.002539 ! Fit after self-cal, rms=0.222137Jy sigma=0.002527 ! Inverting map ! Added new window around map position (10.4, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025645 Jy ! Component: 100 - total flux cleaned = 0.0418972 Jy ! Component: 150 - total flux cleaned = 0.0535434 Jy ! Component: 200 - total flux cleaned = 0.0621461 Jy ! Total flux subtracted in 200 components = 0.0621461 Jy ! Clean residual min=-0.014516 max=0.022062 Jy/beam ! Clean residual mean=-0.000256 rms=0.003510 Jy/beam ! Combined flux in latest and established models = 3.14165 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 139 components and 3.14165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218545Jy sigma=0.002479 ! Fit after self-cal, rms=0.218055Jy sigma=0.002473 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.00* KP 1.01 ! LA 0.95 MK 1.00 NL 1.04 OV 0.99 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.00* KP 1.03 ! LA 0.98 MK 0.99 NL 1.03 OV 0.99 ! PT 0.97 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00* KP 0.90 ! LA 0.94 MK 0.86 NL 0.98 OV 1.04 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00* KP 0.97 ! LA 0.99 MK 0.90 NL 0.98 OV 1.04 ! PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.218055Jy sigma=0.002473 ! Fit after self-cal, rms=0.154870Jy sigma=0.001836 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.868 mas, bmaj=8.02 mas, bpa=40.55 degrees ! Estimated noise=200.565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00816933 Jy ! Component: 100 - total flux cleaned = -0.0114946 Jy ! Component: 150 - total flux cleaned = -0.0134599 Jy ! Component: 200 - total flux cleaned = -0.0149132 Jy ! Total flux subtracted in 200 components = -0.0149132 Jy ! Clean residual min=-0.006271 max=0.008399 Jy/beam ! Clean residual mean=-0.000038 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 3.12674 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 154 components and 3.12674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153317Jy sigma=0.001822 ! Fit after self-cal, rms=0.153250Jy sigma=0.001821 ! Inverting map ! Added new window around map position (-12.8, -49.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775293 Jy ! Component: 100 - total flux cleaned = 0.00847991 Jy ! Component: 150 - total flux cleaned = 0.00868805 Jy ! Component: 200 - total flux cleaned = 0.0086807 Jy ! Total flux subtracted in 200 components = 0.0086807 Jy ! Clean residual min=-0.006362 max=0.005743 Jy/beam ! Clean residual mean=-0.000019 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 3.13542 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 167 components and 3.13542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152354Jy sigma=0.001813 ! Fit after self-cal, rms=0.152320Jy sigma=0.001813 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152320Jy sigma=0.001813 ! Fit after self-cal, rms=0.142821Jy sigma=0.001779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.863 mas, bmaj=8.011 mas, bpa=40.8 degrees ! Estimated noise=200.629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.003455 Jy ! Component: 100 - total flux cleaned = -0.00389137 Jy ! Component: 150 - total flux cleaned = -0.00447588 Jy ! Component: 200 - total flux cleaned = -0.00447281 Jy ! Total flux subtracted in 200 components = -0.00447281 Jy ! Clean residual min=-0.005439 max=0.004500 Jy/beam ! Clean residual mean=0.000009 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 3.13094 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 180 components and 3.13094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142067Jy sigma=0.001774 ! Fit after self-cal, rms=0.142057Jy sigma=0.001773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000762259 Jy ! Component: 100 - total flux cleaned = -0.000925609 Jy ! Component: 150 - total flux cleaned = -0.000924572 Jy ! Component: 200 - total flux cleaned = -0.00107244 Jy ! Total flux subtracted in 200 components = -0.00107244 Jy ! Clean residual min=-0.005426 max=0.004811 Jy/beam ! Clean residual mean=0.000008 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 3.12987 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 187 components and 3.12987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141609Jy sigma=0.001771 ! Fit after self-cal, rms=0.141599Jy sigma=0.001771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141599Jy sigma=0.001771 ! Fit after self-cal, rms=0.131645Jy sigma=0.001742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.861 mas, bmaj=8.005 mas, bpa=40.96 degrees ! Estimated noise=200.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172227 Jy ! Component: 100 - total flux cleaned = -0.00238233 Jy ! Component: 150 - total flux cleaned = -0.0026813 Jy ! Component: 200 - total flux cleaned = -0.00296721 Jy ! Total flux subtracted in 200 components = -0.00296721 Jy ! Clean residual min=-0.003682 max=0.004430 Jy/beam ! Clean residual mean=0.000027 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 3.1269 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 199 components and 3.1269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131179Jy sigma=0.001739 ! Fit after self-cal, rms=0.131182Jy sigma=0.001739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444399 Jy ! Component: 100 - total flux cleaned = -0.000578009 Jy ! Component: 150 - total flux cleaned = -0.000830295 Jy ! Component: 200 - total flux cleaned = -0.000949524 Jy ! Total flux subtracted in 200 components = -0.000949524 Jy ! Clean residual min=-0.003419 max=0.004553 Jy/beam ! Clean residual mean=0.000025 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 3.12595 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 206 components and 3.12595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130867Jy sigma=0.001737 ! Fit after self-cal, rms=0.130858Jy sigma=0.001737 ! Inverting map ! Added new window around map position (-12.8, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020925 Jy ! Component: 100 - total flux cleaned = 0.00194541 Jy ! Component: 150 - total flux cleaned = 0.00168256 Jy ! Component: 200 - total flux cleaned = 0.00155918 Jy ! Total flux subtracted in 200 components = 0.00155918 Jy ! Clean residual min=-0.003335 max=0.004297 Jy/beam ! Clean residual mean=0.000028 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 3.12751 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 222 components and 3.12751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130476Jy sigma=0.001734 ! Fit after self-cal, rms=0.130459Jy sigma=0.001734 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130459Jy sigma=0.001734 ! Fit after self-cal, rms=0.130152Jy sigma=0.001733 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.07 mas, bmaj=14.01 mas, bpa=58.18 degrees ! Estimated noise=223.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127997 Jy ! Component: 100 - total flux cleaned = 0.000130346 Jy ! Component: 150 - total flux cleaned = 0.000129618 Jy ! Component: 200 - total flux cleaned = 5.95845e-05 Jy ! Total flux subtracted in 200 components = 5.95845e-05 Jy ! Clean residual min=-0.003697 max=0.005040 Jy/beam ! Clean residual mean=0.000055 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 3.12757 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 232 components and 3.12757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130043Jy sigma=0.001733 ! Fit after self-cal, rms=0.130030Jy sigma=0.001732 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129629 Jy ! Component: 100 - total flux cleaned = 0.00011264 Jy ! Component: 150 - total flux cleaned = 0.00016383 Jy ! Component: 200 - total flux cleaned = 0.00016218 Jy ! Total flux subtracted in 200 components = 0.00016218 Jy ! Clean residual min=-0.003620 max=0.005019 Jy/beam ! Clean residual mean=0.000056 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 3.12773 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 238 components and 3.12773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129962Jy sigma=0.001732 ! Fit after self-cal, rms=0.129948Jy sigma=0.001732 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.863 mas, bmaj=8.005 mas, bpa=41.02 degrees ! Estimated noise=200.774 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.863 x 8.005 at 41.02 degrees (North through East) ! Clean map min=-0.0031207 max=1.9366 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129948Jy sigma=0.001732 ! Fit after self-cal, rms=0.121837Jy sigma=0.001485 ! Inverting map and beam ! Estimated beam: bmin=6.863 mas, bmaj=8.01 mas, bpa=40.96 degrees ! Estimated noise=200.927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000701568 Jy ! Component: 100 - total flux cleaned = -0.00122888 Jy ! Component: 150 - total flux cleaned = -0.00135029 Jy ! Component: 200 - total flux cleaned = -0.00158365 Jy ! Total flux subtracted in 200 components = -0.00158365 Jy ! Clean residual min=-0.003205 max=0.004525 Jy/beam ! Clean residual mean=0.000024 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 3.12615 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 243 components and 3.12615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121480Jy sigma=0.001483 ! Fit after self-cal, rms=0.121476Jy sigma=0.001483 ! Inverting map ! Added new window around map position (187.2, 64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314772 Jy ! Component: 100 - total flux cleaned = 0.00314965 Jy ! Component: 150 - total flux cleaned = 0.00315004 Jy ! Component: 200 - total flux cleaned = 0.00304699 Jy ! Total flux subtracted in 200 components = 0.00304699 Jy ! Clean residual min=-0.003105 max=0.004314 Jy/beam ! Clean residual mean=0.000025 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 3.1292 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 251 components and 3.1292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121187Jy sigma=0.001481 ! Fit after self-cal, rms=0.121178Jy sigma=0.001480 ! Inverting map ! Added new window around map position (-18.4, 47.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336714 Jy ! Component: 100 - total flux cleaned = 0.00418932 Jy ! Component: 150 - total flux cleaned = 0.0040811 Jy ! Component: 200 - total flux cleaned = 0.00408204 Jy ! Total flux subtracted in 200 components = 0.00408204 Jy ! Clean residual min=-0.003023 max=0.004362 Jy/beam ! Clean residual mean=0.000032 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 3.13328 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 262 components and 3.13328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120903Jy sigma=0.001478 ! Fit after self-cal, rms=0.120895Jy sigma=0.001478 ! Inverting map ! Added new window around map position (109.6, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378919 Jy ! Component: 100 - total flux cleaned = 0.00432372 Jy ! Component: 150 - total flux cleaned = 0.00452566 Jy ! Component: 200 - total flux cleaned = 0.00462482 Jy ! Total flux subtracted in 200 components = 0.00462482 Jy ! Clean residual min=-0.002974 max=0.004186 Jy/beam ! Clean residual mean=0.000030 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 3.1379 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 274 components and 3.1379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120660Jy sigma=0.001475 ! Fit after self-cal, rms=0.120650Jy sigma=0.001475 ! Inverting map ! Added new window around map position (79.2, 112). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413475 Jy ! Component: 100 - total flux cleaned = 0.00615795 Jy ! Component: 150 - total flux cleaned = 0.00674207 Jy ! Component: 200 - total flux cleaned = 0.00692997 Jy ! Total flux subtracted in 200 components = 0.00692997 Jy ! Clean residual min=-0.002973 max=0.003722 Jy/beam ! Clean residual mean=0.000027 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 3.14483 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 287 components and 3.14483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120426Jy sigma=0.001472 ! Fit after self-cal, rms=0.120418Jy sigma=0.001472 ! Inverting map ! Added new window around map position (-156.8, 172). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349347 Jy ! Component: 100 - total flux cleaned = 0.00437504 Jy ! Component: 150 - total flux cleaned = 0.00446846 Jy ! Component: 200 - total flux cleaned = 0.0046515 Jy ! Total flux subtracted in 200 components = 0.0046515 Jy ! Clean residual min=-0.002841 max=0.003497 Jy/beam ! Clean residual mean=0.000021 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 3.14949 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 297 components and 3.14949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120232Jy sigma=0.001470 ! Fit after self-cal, rms=0.120228Jy sigma=0.001470 ! Inverting map ! Added new window around map position (-31.2, -72). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289145 Jy ! Component: 100 - total flux cleaned = 0.00353369 Jy ! Component: 150 - total flux cleaned = 0.0038878 Jy ! Component: 200 - total flux cleaned = 0.00388732 Jy ! Total flux subtracted in 200 components = 0.00388732 Jy ! Clean residual min=-0.002811 max=0.003452 Jy/beam ! Clean residual mean=0.000024 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 3.15337 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 305 components and 3.15337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120047Jy sigma=0.001468 ! Fit after self-cal, rms=0.120041Jy sigma=0.001468 ! Inverting map ! Added new window around map position (-2.4, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204684 Jy ! Component: 100 - total flux cleaned = 0.00232899 Jy ! Component: 150 - total flux cleaned = 0.00250353 Jy ! Component: 200 - total flux cleaned = 0.00275548 Jy ! Total flux subtracted in 200 components = 0.00275548 Jy ! Clean residual min=-0.002774 max=0.003226 Jy/beam ! Clean residual mean=0.000028 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 3.15613 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 320 components and 3.15613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119852Jy sigma=0.001467 ! Fit after self-cal, rms=0.119845Jy sigma=0.001467 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119845Jy sigma=0.001467 ! Fit after self-cal, rms=0.119319Jy sigma=0.001466 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.169 mas, bmaj=6.119 mas, bpa=41.85 degrees ! Estimated noise=461.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43659 Jy ! Component: 100 - total flux cleaned = 1.95389 Jy ! Component: 150 - total flux cleaned = 2.25092 Jy ! Component: 200 - total flux cleaned = 2.45241 Jy ! Total flux subtracted in 200 components = 2.45241 Jy ! Clean residual min=-0.022287 max=0.112029 Jy/beam ! Clean residual mean=-0.000228 rms=0.007396 Jy/beam ! Combined flux in latest and established models = 2.45241 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 2.45241 Jy ! Inverting map and beam ! Estimated beam: bmin=6.866 mas, bmaj=8.008 mas, bpa=40.89 degrees ! Estimated noise=201.062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23369 Jy ! Component: 100 - total flux cleaned = 0.37217 Jy ! Component: 150 - total flux cleaned = 0.460211 Jy ! Component: 200 - total flux cleaned = 0.518181 Jy ! Total flux subtracted in 200 components = 0.518181 Jy ! Clean residual min=-0.008224 max=0.031432 Jy/beam ! Clean residual mean=-0.000260 rms=0.002997 Jy/beam ! Combined flux in latest and established models = 2.97059 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 86 components and 2.97059 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390086 Jy ! Component: 100 - total flux cleaned = 0.0657453 Jy ! Component: 150 - total flux cleaned = 0.0844293 Jy ! Component: 200 - total flux cleaned = 0.0983155 Jy ! Total flux subtracted in 200 components = 0.0983155 Jy ! Clean residual min=-0.004333 max=0.009563 Jy/beam ! Clean residual mean=-0.000086 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 3.06891 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 124 components and 3.06891 Jy ! Inverting map ! Added new window around map position (-4.8, -31.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113152 Jy ! Component: 100 - total flux cleaned = 0.0204214 Jy ! Component: 150 - total flux cleaned = 0.0280506 Jy ! Component: 200 - total flux cleaned = 0.0327294 Jy ! Total flux subtracted in 200 components = 0.0327294 Jy ! Clean residual min=-0.004374 max=0.004907 Jy/beam ! Clean residual mean=-0.000030 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 3.10164 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 150 components and 3.10164 Jy ! Inverting map ! Added new window around map position (11.2, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416909 Jy ! Component: 100 - total flux cleaned = 0.00781866 Jy ! Component: 150 - total flux cleaned = 0.011273 Jy ! Component: 200 - total flux cleaned = 0.0145449 Jy ! Total flux subtracted in 200 components = 0.0145449 Jy ! Clean residual min=-0.003554 max=0.004368 Jy/beam ! Clean residual mean=-0.000014 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 3.11618 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 167 components and 3.11618 Jy ! Inverting map ! Added new window around map position (-13.6, -64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323292 Jy ! Component: 100 - total flux cleaned = 0.00622303 Jy ! Component: 150 - total flux cleaned = 0.00906809 Jy ! Component: 200 - total flux cleaned = 0.0119669 Jy ! Total flux subtracted in 200 components = 0.0119669 Jy ! Clean residual min=-0.003331 max=0.003940 Jy/beam ! Clean residual mean=-0.000002 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 3.12815 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 183 components and 3.12815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.08 mas, bmaj=14.02 mas, bpa=58.01 degrees ! Estimated noise=223.917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498083 Jy ! Component: 100 - total flux cleaned = 0.00910522 Jy ! Component: 150 - total flux cleaned = 0.0127087 Jy ! Component: 200 - total flux cleaned = 0.0159246 Jy ! Total flux subtracted in 200 components = 0.0159246 Jy ! Clean residual min=-0.002844 max=0.004158 Jy/beam ! Clean residual mean=0.000009 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 3.14407 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289783 Jy ! Component: 100 - total flux cleaned = 0.00552273 Jy ! Component: 150 - total flux cleaned = 0.00791521 Jy ! Component: 200 - total flux cleaned = 0.0100172 Jy ! Total flux subtracted in 200 components = 0.0100172 Jy ! Clean residual min=-0.002809 max=0.004162 Jy/beam ! Clean residual mean=0.000021 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 3.15409 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 291 components and 3.15409 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.866 mas, bmaj=8.008 mas, bpa=40.89 degrees ! Estimated noise=201.062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284591 Jy ! Component: 100 - total flux cleaned = 0.000327923 Jy ! Component: 150 - total flux cleaned = 0.00075364 Jy ! Component: 200 - total flux cleaned = 0.00116043 Jy ! Total flux subtracted in 200 components = 0.00116043 Jy ! Clean residual min=-0.003268 max=0.003619 Jy/beam ! Clean residual mean=0.000016 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 3.15525 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 300 components and 3.15525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120547Jy sigma=0.001474 ! Fit after self-cal, rms=0.120432Jy sigma=0.001473 wmodel J1927+7358_L_2010_05_21_pus_map.mod ! Writing 300 model components to file: J1927+7358_L_2010_05_21_pus_map.mod wobs J1927+7358_L_2010_05_21_pus_uvs.fits ! Writing UV FITS file: J1927+7358_L_2010_05_21_pus_uvs.fits wwins J1927+7358_L_2010_05_21_pus_map.win ! wwins: Wrote 17 windows to J1927+7358_L_2010_05_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163344 Jy ! Component: 100 - total flux cleaned = 0.00318158 Jy ! Component: 150 - total flux cleaned = 0.00449694 Jy ! Component: 200 - total flux cleaned = 0.00583609 Jy ! Component: 250 - total flux cleaned = 0.00714428 Jy ! Component: 300 - total flux cleaned = 0.00825865 Jy ! Component: 350 - total flux cleaned = 0.00929721 Jy ! Component: 400 - total flux cleaned = 0.0104239 Jy ! Component: 450 - total flux cleaned = 0.0114785 Jy ! Component: 500 - total flux cleaned = 0.0124123 Jy ! Component: 550 - total flux cleaned = 0.0133839 Jy ! Component: 600 - total flux cleaned = 0.0141398 Jy ! Component: 650 - total flux cleaned = 0.0148364 Jy ! Component: 700 - total flux cleaned = 0.015427 Jy ! Component: 750 - total flux cleaned = 0.0160595 Jy ! Component: 800 - total flux cleaned = 0.0167323 Jy ! Component: 850 - total flux cleaned = 0.017351 Jy ! Component: 900 - total flux cleaned = 0.0180109 Jy ! Component: 950 - total flux cleaned = 0.0186178 Jy ! Component: 1000 - total flux cleaned = 0.0190809 Jy ! Component: 1050 - total flux cleaned = 0.0197695 Jy ! Component: 1100 - total flux cleaned = 0.0201335 Jy ! Component: 1150 - total flux cleaned = 0.02054 Jy ! Component: 1200 - total flux cleaned = 0.0208543 Jy ! Component: 1250 - total flux cleaned = 0.021299 Jy ! Component: 1300 - total flux cleaned = 0.0215644 Jy ! Component: 1350 - total flux cleaned = 0.0219154 Jy ! Component: 1400 - total flux cleaned = 0.0221777 Jy ! Component: 1450 - total flux cleaned = 0.0224376 Jy ! Component: 1500 - total flux cleaned = 0.0226103 Jy ! Component: 1550 - total flux cleaned = 0.0229528 Jy ! Component: 1600 - total flux cleaned = 0.0231659 Jy ! Component: 1650 - total flux cleaned = 0.0234195 Jy ! Component: 1700 - total flux cleaned = 0.0236721 Jy ! Component: 1750 - total flux cleaned = 0.0238808 Jy ! Component: 1800 - total flux cleaned = 0.0240886 Jy ! Component: 1850 - total flux cleaned = 0.0242955 Jy ! Component: 1900 - total flux cleaned = 0.0244598 Jy ! Component: 1950 - total flux cleaned = 0.024787 Jy ! Component: 2000 - total flux cleaned = 0.0248685 Jy ! Component: 2050 - total flux cleaned = 0.0249902 Jy ! Component: 2100 - total flux cleaned = 0.025313 Jy ! Component: 2150 - total flux cleaned = 0.0254732 Jy ! Component: 2200 - total flux cleaned = 0.0256725 Jy ! Component: 2250 - total flux cleaned = 0.0259904 Jy ! Component: 2300 - total flux cleaned = 0.0259507 Jy ! Component: 2350 - total flux cleaned = 0.0261869 Jy ! Component: 2400 - total flux cleaned = 0.0263828 Jy ! Component: 2450 - total flux cleaned = 0.026578 Jy ! Component: 2500 - total flux cleaned = 0.0267338 Jy ! Component: 2550 - total flux cleaned = 0.0269277 Jy ! Component: 2600 - total flux cleaned = 0.0270818 Jy ! Component: 2650 - total flux cleaned = 0.0272738 Jy ! Component: 2700 - total flux cleaned = 0.0273887 Jy ! Component: 2750 - total flux cleaned = 0.027617 Jy ! Component: 2800 - total flux cleaned = 0.0277308 Jy ! Component: 2850 - total flux cleaned = 0.0278442 Jy ! Component: 2900 - total flux cleaned = 0.0281452 Jy ! Component: 2950 - total flux cleaned = 0.0283326 Jy ! Component: 3000 - total flux cleaned = 0.0285194 Jy ! Component: 3050 - total flux cleaned = 0.0287053 Jy ! Component: 3100 - total flux cleaned = 0.0287792 Jy ! Component: 3150 - total flux cleaned = 0.028853 Jy ! Component: 3200 - total flux cleaned = 0.0290734 Jy ! Component: 3250 - total flux cleaned = 0.0291834 Jy ! Component: 3300 - total flux cleaned = 0.0292197 Jy ! Component: 3350 - total flux cleaned = 0.0295833 Jy ! Component: 3400 - total flux cleaned = 0.029511 Jy ! Component: 3450 - total flux cleaned = 0.0297276 Jy ! Component: 3500 - total flux cleaned = 0.0299074 Jy ! Component: 3550 - total flux cleaned = 0.0300147 Jy ! Component: 3600 - total flux cleaned = 0.0299791 Jy ! Component: 3650 - total flux cleaned = 0.0301569 Jy ! Component: 3700 - total flux cleaned = 0.0301568 Jy ! Component: 3750 - total flux cleaned = 0.0303684 Jy ! Component: 3800 - total flux cleaned = 0.0303685 Jy ! Component: 3850 - total flux cleaned = 0.0306139 Jy ! Component: 3900 - total flux cleaned = 0.030684 Jy ! Component: 3950 - total flux cleaned = 0.0309279 Jy ! Component: 4000 - total flux cleaned = 0.0309628 Jy ! Component: 4050 - total flux cleaned = 0.031032 Jy ! Total flux subtracted in 4096 components = 0.0310321 Jy ! Clean residual min=-0.002196 max=0.001918 Jy/beam ! Clean residual mean=0.000013 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 3.18628 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 600 components and 3.18628 Jy ![Exited script file: muppet] wmap "J1927+7358_L_2010_05_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.866 x 8.008 at 40.89 degrees (North through East) ! Clean map min=-0.0024687 max=1.9462 Jy/beam ! Writing clean map to FITS file: J1927+7358_L_2010_05_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.94617 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000619811 device "J1927+7358_L_2010_05_21_pus\_map.eps/VPS" ! Attempting to open device: 'J1927+7358_L_2010_05_21_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0955432 0.0955432 0.191086 0.382173 0.764346 1.52869 3.05738 6.11476 12.2295 24.4591 48.9181 97.8362 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.946 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.866 x 8.008 at 40.89 degrees (North through East) ! Clean map min=-0.0024687 max=1.9462 Jy/beam quit ! Quitting program ! Log file J1927+7358_L_2010_05_21_pus_uvs.log closed on Wed Jan 6 22:18:06 2016