! Started logfile: J1824+5651_L_2010_07_29_pus_uvs.log on Sat Jan 9 14:56:40 2016 obs J1824+5651_L_2010_07_29_pus_uva.fits ! Reading UV FITS file: J1824+5651_L_2010_07_29_pus_uva.fits ! AN table 1: 533 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772775 visibilities/baseline/integration-bin. ! Found source: J1824+5651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 1.35446e+09 8e+06 1 8e+06 ! 02 2 1.36246e+09 8e+06 1 8e+06 ! 03 3 1.42646e+09 8e+06 1 8e+06 ! 04 4 1.43446e+09 8e+06 1 8e+06 ! ! Polarization(s): RR LL RL LR ! ! Read 741 lines of history. ! ! Reading 296560 visibilities. select I ! Selecting polarization: I, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 2048 print "field_cell =",field_cell ! field_cell = 0.8 print "taper_size =",taper_size ! taper_size = 15 ![@muppet J1824+5651_L_2010_07_29_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 2048x2048 pixels with 0.800x0.800 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 616 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 616 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 616 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 616 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.505420Jy sigma=0.006498 ! Fit after self-cal, rms=0.494453Jy sigma=0.006360 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.16 mas, bmaj=6.87 mas, bpa=1.645 degrees ! Estimated noise=437.028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.385334 Jy ! Component: 100 - total flux cleaned = 0.481051 Jy ! Total flux subtracted in 100 components = 0.481051 Jy ! Clean residual min=-0.010602 max=0.039423 Jy/beam ! Clean residual mean=0.000004 rms=0.002177 Jy/beam ! Combined flux in latest and established models = 0.481051 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.481051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122494Jy sigma=0.001470 ! Fit after self-cal, rms=0.121432Jy sigma=0.001463 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453779 Jy ! Component: 100 - total flux cleaned = 0.0684396 Jy ! Total flux subtracted in 100 components = 0.0684396 Jy ! Clean residual min=-0.008256 max=0.023837 Jy/beam ! Clean residual mean=0.000004 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.549491 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.549491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099352Jy sigma=0.001130 ! Fit after self-cal, rms=0.098654Jy sigma=0.001125 ! Inverting map ! Added new window around map position (-8, -23.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212546 Jy ! Component: 100 - total flux cleaned = 0.0341338 Jy ! Total flux subtracted in 100 components = 0.0341338 Jy ! Clean residual min=-0.007492 max=0.016565 Jy/beam ! Clean residual mean=0.000003 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.583624 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.583624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091995Jy sigma=0.001018 ! Fit after self-cal, rms=0.091326Jy sigma=0.001011 ! Inverting map ! Added new window around map position (-15.2, -38.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161369 Jy ! Component: 100 - total flux cleaned = 0.0267798 Jy ! Total flux subtracted in 100 components = 0.0267798 Jy ! Clean residual min=-0.006958 max=0.013763 Jy/beam ! Clean residual mean=0.000003 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.610404 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 0.610404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086543Jy sigma=0.000930 ! Fit after self-cal, rms=0.086339Jy sigma=0.000928 ! Inverting map ! Added new window around map position (-4, -10.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102679 Jy ! Component: 100 - total flux cleaned = 0.0162998 Jy ! Total flux subtracted in 100 components = 0.0162998 Jy ! Clean residual min=-0.006734 max=0.007779 Jy/beam ! Clean residual mean=0.000003 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.626704 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.626704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083530Jy sigma=0.000889 ! Fit after self-cal, rms=0.083300Jy sigma=0.000887 ! Inverting map ! Added new window around map position (-16, -48). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611704 Jy ! Component: 100 - total flux cleaned = 0.0110339 Jy ! Total flux subtracted in 100 components = 0.0110339 Jy ! Clean residual min=-0.006446 max=0.006729 Jy/beam ! Clean residual mean=0.000003 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.637738 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 65 components and 0.637738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081760Jy sigma=0.000866 ! Fit after self-cal, rms=0.081642Jy sigma=0.000865 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.971 mas, bmaj=8.944 mas, bpa=2.738 degrees ! Estimated noise=205.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.6, -119.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012012 Jy ! Component: 100 - total flux cleaned = 0.0214311 Jy ! Component: 150 - total flux cleaned = 0.029301 Jy ! Component: 200 - total flux cleaned = 0.0359693 Jy ! Total flux subtracted in 200 components = 0.0359693 Jy ! Clean residual min=-0.005179 max=0.006770 Jy/beam ! Clean residual mean=0.000007 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.673707 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 113 components and 0.673707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078876Jy sigma=0.000819 ! Fit after self-cal, rms=0.078729Jy sigma=0.000817 ! Inverting map ! Added new window around map position (-7.2, -48.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756132 Jy ! Component: 100 - total flux cleaned = 0.0136133 Jy ! Component: 150 - total flux cleaned = 0.0188458 Jy ! Component: 200 - total flux cleaned = 0.0234242 Jy ! Total flux subtracted in 200 components = 0.0234242 Jy ! Clean residual min=-0.004831 max=0.005257 Jy/beam ! Clean residual mean=0.000007 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.697131 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 142 components and 0.697131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077485Jy sigma=0.000797 ! Fit after self-cal, rms=0.077432Jy sigma=0.000797 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.00* KP 1.00 ! LA 1.03 MK 0.99 NL 1.05 OV 0.98 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.00* KP 1.02 ! LA 1.06 MK 0.99 NL 1.03 OV 0.99 ! PT 0.96 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00* KP 0.89 ! LA 0.94 MK 0.89 NL 0.98 OV 1.00 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00* KP 0.95 ! LA 0.97 MK 0.93 NL 0.96 OV 1.02 ! PT 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.077432Jy sigma=0.000797 ! Fit after self-cal, rms=0.061476Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.945 mas, bmaj=8.95 mas, bpa=1.937 degrees ! Estimated noise=205.374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.4, -80.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542908 Jy ! Component: 100 - total flux cleaned = 0.00956977 Jy ! Component: 150 - total flux cleaned = 0.0130709 Jy ! Component: 200 - total flux cleaned = 0.0156416 Jy ! Total flux subtracted in 200 components = 0.0156416 Jy ! Clean residual min=-0.002531 max=0.004016 Jy/beam ! Clean residual mean=0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.712773 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 184 components and 0.712773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060754Jy sigma=0.000629 ! Fit after self-cal, rms=0.060697Jy sigma=0.000629 ! Inverting map ! Added new window around map position (-29.6, -153.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447662 Jy ! Component: 100 - total flux cleaned = 0.00720516 Jy ! Component: 150 - total flux cleaned = 0.00960136 Jy ! Component: 200 - total flux cleaned = 0.0116873 Jy ! Total flux subtracted in 200 components = 0.0116873 Jy ! Clean residual min=-0.002234 max=0.002721 Jy/beam ! Clean residual mean=-0.000000 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.72446 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 217 components and 0.72446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060172Jy sigma=0.000620 ! Fit after self-cal, rms=0.060131Jy sigma=0.000620 ! Inverting map ! Added new window around map position (-16, -25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271166 Jy ! Component: 100 - total flux cleaned = 0.00479294 Jy ! Component: 150 - total flux cleaned = 0.00660911 Jy ! Component: 200 - total flux cleaned = 0.00811961 Jy ! Total flux subtracted in 200 components = 0.00811961 Jy ! Clean residual min=-0.002178 max=0.002475 Jy/beam ! Clean residual mean=-0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.73258 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 243 components and 0.73258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059809Jy sigma=0.000616 ! Fit after self-cal, rms=0.059775Jy sigma=0.000615 ! Inverting map ! Added new window around map position (-31.2, -56.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163645 Jy ! Component: 100 - total flux cleaned = 0.00320216 Jy ! Component: 150 - total flux cleaned = 0.0045685 Jy ! Component: 200 - total flux cleaned = 0.00569474 Jy ! Total flux subtracted in 200 components = 0.00569474 Jy ! Clean residual min=-0.002228 max=0.002235 Jy/beam ! Clean residual mean=-0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.738275 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 260 components and 0.738274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059515Jy sigma=0.000613 ! Fit after self-cal, rms=0.059481Jy sigma=0.000612 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059481Jy sigma=0.000612 ! Fit after self-cal, rms=0.057873Jy sigma=0.000602 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.938 mas, bmaj=8.96 mas, bpa=2.207 degrees ! Estimated noise=205.478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.67234e-05 Jy ! Component: 100 - total flux cleaned = 0.000881606 Jy ! Component: 150 - total flux cleaned = 0.0017086 Jy ! Component: 200 - total flux cleaned = 0.00225639 Jy ! Total flux subtracted in 200 components = 0.00225639 Jy ! Clean residual min=-0.001683 max=0.001989 Jy/beam ! Clean residual mean=-0.000003 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.740531 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 279 components and 0.740531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057627Jy sigma=0.000600 ! Fit after self-cal, rms=0.057602Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -23.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250479 Jy ! Component: 100 - total flux cleaned = 0.000441604 Jy ! Component: 150 - total flux cleaned = 0.000843292 Jy ! Component: 200 - total flux cleaned = 0.0012225 Jy ! Total flux subtracted in 200 components = 0.0012225 Jy ! Clean residual min=-0.001697 max=0.001913 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.741753 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 292 components and 0.741753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057353Jy sigma=0.000599 ! Fit after self-cal, rms=0.057329Jy sigma=0.000599 ! Inverting map ! Added new window around map position (-7.2, -114.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016494 Jy ! Component: 100 - total flux cleaned = 0.0023095 Jy ! Component: 150 - total flux cleaned = 0.00262604 Jy ! Component: 200 - total flux cleaned = 0.00287599 Jy ! Total flux subtracted in 200 components = 0.00287599 Jy ! Clean residual min=-0.001673 max=0.001863 Jy/beam ! Clean residual mean=-0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.744629 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 313 components and 0.74463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057166Jy sigma=0.000597 ! Fit after self-cal, rms=0.057147Jy sigma=0.000597 ! Inverting map ! Added new window around map position (-30.4, -189.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187837 Jy ! Component: 100 - total flux cleaned = 0.00275357 Jy ! Component: 150 - total flux cleaned = 0.00326027 Jy ! Component: 200 - total flux cleaned = 0.00350223 Jy ! Total flux subtracted in 200 components = 0.00350223 Jy ! Clean residual min=-0.001611 max=0.001579 Jy/beam ! Clean residual mean=-0.000004 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.748132 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 333 components and 0.748132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056982Jy sigma=0.000596 ! Fit after self-cal, rms=0.056968Jy sigma=0.000596 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056968Jy sigma=0.000596 ! Fit after self-cal, rms=0.051217Jy sigma=0.000581 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.927 mas, bmaj=8.942 mas, bpa=1.659 degrees ! Estimated noise=205.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00076693 Jy ! Component: 100 - total flux cleaned = 0.00124816 Jy ! Component: 150 - total flux cleaned = 0.00168067 Jy ! Component: 200 - total flux cleaned = 0.00199918 Jy ! Total flux subtracted in 200 components = 0.00199918 Jy ! Clean residual min=-0.001078 max=0.001348 Jy/beam ! Clean residual mean=-0.000002 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.750131 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 358 components and 0.750131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051131Jy sigma=0.000580 ! Fit after self-cal, rms=0.051111Jy sigma=0.000580 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -71.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083115 Jy ! Component: 100 - total flux cleaned = 0.00148871 Jy ! Component: 150 - total flux cleaned = 0.00178499 Jy ! Component: 200 - total flux cleaned = 0.0020971 Jy ! Total flux subtracted in 200 components = 0.0020971 Jy ! Clean residual min=-0.001047 max=0.001294 Jy/beam ! Clean residual mean=-0.000002 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.752228 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 378 components and 0.752228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051039Jy sigma=0.000579 ! Fit after self-cal, rms=0.051028Jy sigma=0.000579 ! Inverting map ! Added new window around map position (-15.2, -167.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083481 Jy ! Component: 100 - total flux cleaned = 0.00126489 Jy ! Component: 150 - total flux cleaned = 0.00152795 Jy ! Component: 200 - total flux cleaned = 0.00180844 Jy ! Total flux subtracted in 200 components = 0.00180844 Jy ! Clean residual min=-0.001019 max=0.001117 Jy/beam ! Clean residual mean=-0.000002 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.754036 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 391 components and 0.754036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050972Jy sigma=0.000578 ! Fit after self-cal, rms=0.050965Jy sigma=0.000578 ! Inverting map ! Added new window around map position (-40.8, -102.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894061 Jy ! Component: 100 - total flux cleaned = 0.00127997 Jy ! Component: 150 - total flux cleaned = 0.00158912 Jy ! Component: 200 - total flux cleaned = 0.00188219 Jy ! Total flux subtracted in 200 components = 0.00188219 Jy ! Clean residual min=-0.001000 max=0.001063 Jy/beam ! Clean residual mean=-0.000002 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.755918 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 408 components and 0.755919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050914Jy sigma=0.000578 ! Fit after self-cal, rms=0.050909Jy sigma=0.000578 ! Inverting map ! Added new window around map position (-53.6, -274.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078291 Jy ! Component: 100 - total flux cleaned = 0.00124478 Jy ! Component: 150 - total flux cleaned = 0.00149739 Jy ! Component: 200 - total flux cleaned = 0.00182186 Jy ! Total flux subtracted in 200 components = 0.00182186 Jy ! Clean residual min=-0.000958 max=0.000988 Jy/beam ! Clean residual mean=-0.000002 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.75774 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 420 components and 0.75774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050867Jy sigma=0.000577 ! Fit after self-cal, rms=0.050863Jy sigma=0.000577 ! Inverting map ! Added new window around map position (306.4, 249.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571233 Jy ! Component: 100 - total flux cleaned = 0.000785244 Jy ! Component: 150 - total flux cleaned = 0.000990681 Jy ! Component: 200 - total flux cleaned = 0.00114099 Jy ! Total flux subtracted in 200 components = 0.00114099 Jy ! Clean residual min=-0.000934 max=0.000980 Jy/beam ! Clean residual mean=-0.000002 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.758881 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 436 components and 0.758881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050829Jy sigma=0.000577 ! Fit after self-cal, rms=0.050826Jy sigma=0.000577 ! Inverting map ! Added new window around map position (185.6, -115.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720895 Jy ! Component: 100 - total flux cleaned = 0.00106726 Jy ! Component: 150 - total flux cleaned = 0.00128686 Jy ! Component: 200 - total flux cleaned = 0.00147624 Jy ! Total flux subtracted in 200 components = 0.00147624 Jy ! Clean residual min=-0.000939 max=0.000955 Jy/beam ! Clean residual mean=-0.000002 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.760358 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 455 components and 0.760357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050792Jy sigma=0.000577 ! Fit after self-cal, rms=0.050789Jy sigma=0.000577 ! Inverting map ! Added new window around map position (195.2, 256.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831797 Jy ! Component: 100 - total flux cleaned = 0.00124308 Jy ! Component: 150 - total flux cleaned = 0.00145342 Jy ! Component: 200 - total flux cleaned = 0.0015894 Jy ! Total flux subtracted in 200 components = 0.0015894 Jy ! Clean residual min=-0.000923 max=0.000923 Jy/beam ! Clean residual mean=-0.000001 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.761947 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 473 components and 0.761947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050760Jy sigma=0.000576 ! Fit after self-cal, rms=0.050758Jy sigma=0.000576 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050758Jy sigma=0.000576 ! Fit after self-cal, rms=0.050745Jy sigma=0.000576 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.02 mas, bmaj=14 mas, bpa=-0.5083 degrees ! Estimated noise=224.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811767 Jy ! Component: 100 - total flux cleaned = 0.00150502 Jy ! Component: 150 - total flux cleaned = 0.00212661 Jy ! Component: 200 - total flux cleaned = 0.0026502 Jy ! Total flux subtracted in 200 components = 0.0026502 Jy ! Clean residual min=-0.000988 max=0.000982 Jy/beam ! Clean residual mean=-0.000003 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.764597 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 520 components and 0.764597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050732Jy sigma=0.000576 ! Fit after self-cal, rms=0.050732Jy sigma=0.000576 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514288 Jy ! Component: 100 - total flux cleaned = 0.000885679 Jy ! Component: 150 - total flux cleaned = 0.00121581 Jy ! Component: 200 - total flux cleaned = 0.00150925 Jy ! Total flux subtracted in 200 components = 0.00150925 Jy ! Clean residual min=-0.000980 max=0.000955 Jy/beam ! Clean residual mean=-0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.766106 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 542 components and 0.766106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050724Jy sigma=0.000576 ! Fit after self-cal, rms=0.050724Jy sigma=0.000576 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.929 mas, bmaj=8.94 mas, bpa=1.7 degrees ! Estimated noise=205.359 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.929 x 8.94 at 1.7 degrees (North through East) ! Clean map min=-0.00097331 max=0.50144 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050724Jy sigma=0.000576 ! Fit after self-cal, rms=0.046976Jy sigma=0.000530 ! Inverting map and beam ! Estimated beam: bmin=6.929 mas, bmaj=8.938 mas, bpa=1.675 degrees ! Estimated noise=205.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121787 Jy ! Component: 100 - total flux cleaned = 0.000220426 Jy ! Component: 150 - total flux cleaned = 0.000360132 Jy ! Component: 200 - total flux cleaned = 0.000472069 Jy ! Total flux subtracted in 200 components = 0.000472069 Jy ! Clean residual min=-0.000802 max=0.000875 Jy/beam ! Clean residual mean=-0.000002 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.766578 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 551 components and 0.766578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046945Jy sigma=0.000530 ! Fit after self-cal, rms=0.046943Jy sigma=0.000530 ! Inverting map ! Added new window around map position (216.8, 60.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703458 Jy ! Component: 100 - total flux cleaned = 0.00077338 Jy ! Component: 150 - total flux cleaned = 0.000881446 Jy ! Component: 200 - total flux cleaned = 0.00100654 Jy ! Total flux subtracted in 200 components = 0.00100654 Jy ! Clean residual min=-0.000781 max=0.000875 Jy/beam ! Clean residual mean=-0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.767585 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 562 components and 0.767585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046911Jy sigma=0.000530 ! Fit after self-cal, rms=0.046910Jy sigma=0.000530 ! Inverting map ! Added new window around map position (261.6, -308.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000754187 Jy ! Component: 100 - total flux cleaned = 0.000913458 Jy ! Component: 150 - total flux cleaned = 0.000995747 Jy ! Component: 200 - total flux cleaned = 0.00107579 Jy ! Total flux subtracted in 200 components = 0.00107579 Jy ! Clean residual min=-0.000776 max=0.000858 Jy/beam ! Clean residual mean=-0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.76866 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 579 components and 0.76866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046883Jy sigma=0.000529 ! Fit after self-cal, rms=0.046882Jy sigma=0.000529 ! Inverting map ! Added new window around map position (-43.2, -128). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698234 Jy ! Component: 100 - total flux cleaned = 0.000857251 Jy ! Component: 150 - total flux cleaned = 0.000978826 Jy ! Component: 200 - total flux cleaned = 0.00105686 Jy ! Total flux subtracted in 200 components = 0.00105686 Jy ! Clean residual min=-0.000787 max=0.000760 Jy/beam ! Clean residual mean=-0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.769717 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 593 components and 0.769717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046857Jy sigma=0.000529 ! Fit after self-cal, rms=0.046856Jy sigma=0.000529 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046856Jy sigma=0.000529 ! Fit after self-cal, rms=0.046860Jy sigma=0.000529 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.12 mas, bmaj=6.847 mas, bpa=0.4421 degrees ! Estimated noise=435.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.38336 Jy ! Component: 100 - total flux cleaned = 0.487711 Jy ! Component: 150 - total flux cleaned = 0.534033 Jy ! Component: 200 - total flux cleaned = 0.560426 Jy ! Total flux subtracted in 200 components = 0.560426 Jy ! Clean residual min=-0.003789 max=0.014472 Jy/beam ! Clean residual mean=0.000003 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.560426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.560426 Jy ! Inverting map and beam ! Estimated beam: bmin=6.93 mas, bmaj=8.937 mas, bpa=1.691 degrees ! Estimated noise=205.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313191 Jy ! Component: 100 - total flux cleaned = 0.0521969 Jy ! Component: 150 - total flux cleaned = 0.0677613 Jy ! Component: 200 - total flux cleaned = 0.0801233 Jy ! Total flux subtracted in 200 components = 0.0801233 Jy ! Clean residual min=-0.003348 max=0.007421 Jy/beam ! Clean residual mean=0.000004 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.640549 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 111 components and 0.640549 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101681 Jy ! Component: 100 - total flux cleaned = 0.0188749 Jy ! Component: 150 - total flux cleaned = 0.0264929 Jy ! Component: 200 - total flux cleaned = 0.0332468 Jy ! Total flux subtracted in 200 components = 0.0332468 Jy ! Clean residual min=-0.002434 max=0.004381 Jy/beam ! Clean residual mean=0.000003 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.673796 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 210 components and 0.673796 Jy ! Inverting map ! Added new window around map position (-13.6, -64.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060612 Jy ! Component: 100 - total flux cleaned = 0.0115478 Jy ! Component: 150 - total flux cleaned = 0.0165627 Jy ! Component: 200 - total flux cleaned = 0.0211634 Jy ! Total flux subtracted in 200 components = 0.0211634 Jy ! Clean residual min=-0.001933 max=0.003096 Jy/beam ! Clean residual mean=0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.694959 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 296 components and 0.694959 Jy ! Inverting map ! Added new window around map position (-24.8, -138.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425288 Jy ! Component: 100 - total flux cleaned = 0.00817771 Jy ! Component: 150 - total flux cleaned = 0.011814 Jy ! Component: 200 - total flux cleaned = 0.0151968 Jy ! Total flux subtracted in 200 components = 0.0151968 Jy ! Clean residual min=-0.001648 max=0.002301 Jy/beam ! Clean residual mean=0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.710156 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 366 components and 0.710156 Jy ! Inverting map ! Added new window around map position (-24.8, -102.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316652 Jy ! Component: 100 - total flux cleaned = 0.00611804 Jy ! Component: 150 - total flux cleaned = 0.00888156 Jy ! Component: 200 - total flux cleaned = 0.0114746 Jy ! Total flux subtracted in 200 components = 0.0114746 Jy ! Clean residual min=-0.001473 max=0.001845 Jy/beam ! Clean residual mean=0.000000 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.72163 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 433 components and 0.72163 Jy ! Inverting map ! Added new window around map position (4, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245619 Jy ! Component: 100 - total flux cleaned = 0.00475608 Jy ! Component: 150 - total flux cleaned = 0.0069243 Jy ! Component: 200 - total flux cleaned = 0.0089705 Jy ! Total flux subtracted in 200 components = 0.0089705 Jy ! Clean residual min=-0.001335 max=0.001450 Jy/beam ! Clean residual mean=-0.000000 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.730601 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 484 components and 0.730601 Jy ! Inverting map ! Added new window around map position (-45.6, -160). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187414 Jy ! Component: 100 - total flux cleaned = 0.00349133 Jy ! Component: 150 - total flux cleaned = 0.00502868 Jy ! Component: 200 - total flux cleaned = 0.00642628 Jy ! Total flux subtracted in 200 components = 0.00642628 Jy ! Clean residual min=-0.001229 max=0.001224 Jy/beam ! Clean residual mean=-0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.737027 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 524 components and 0.737027 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.03 mas, bmaj=14 mas, bpa=-0.471 degrees ! Estimated noise=224.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236749 Jy ! Component: 100 - total flux cleaned = 0.00448609 Jy ! Component: 150 - total flux cleaned = 0.00641326 Jy ! Component: 200 - total flux cleaned = 0.00818956 Jy ! Total flux subtracted in 200 components = 0.00818956 Jy ! Clean residual min=-0.001433 max=0.001197 Jy/beam ! Clean residual mean=-0.000002 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.745216 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165097 Jy ! Component: 100 - total flux cleaned = 0.00319317 Jy ! Component: 150 - total flux cleaned = 0.00463687 Jy ! Component: 200 - total flux cleaned = 0.00599277 Jy ! Total flux subtracted in 200 components = 0.00599277 Jy ! Clean residual min=-0.001289 max=0.001091 Jy/beam ! Clean residual mean=-0.000003 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.751209 Jy ! Adding 283 model components to the UV plane model. ! The established model now contains 790 components and 0.751209 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.93 mas, bmaj=8.937 mas, bpa=1.691 degrees ! Estimated noise=205.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207394 Jy ! Component: 100 - total flux cleaned = 0.000880515 Jy ! Component: 150 - total flux cleaned = 0.00158726 Jy ! Component: 200 - total flux cleaned = 0.00237421 Jy ! Total flux subtracted in 200 components = 0.00237421 Jy ! Clean residual min=-0.000946 max=0.000937 Jy/beam ! Clean residual mean=-0.000002 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.753583 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 822 components and 0.753583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046886Jy sigma=0.000530 ! Fit after self-cal, rms=0.046844Jy sigma=0.000530 wmodel J1824+5651_L_2010_07_29_pus_map.mod ! Writing 822 model components to file: J1824+5651_L_2010_07_29_pus_map.mod wobs J1824+5651_L_2010_07_29_pus_uvs.fits ! Writing UV FITS file: J1824+5651_L_2010_07_29_pus_uvs.fits wwins J1824+5651_L_2010_07_29_pus_map.win ! wwins: Wrote 29 windows to J1824+5651_L_2010_07_29_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=8192 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.87808e-05 Jy ! Component: 100 - total flux cleaned = -1.21854e-05 Jy ! Component: 150 - total flux cleaned = -4.23685e-05 Jy ! Component: 200 - total flux cleaned = -5.70823e-05 Jy ! Component: 250 - total flux cleaned = -5.70175e-05 Jy ! Component: 300 - total flux cleaned = -4.25861e-05 Jy ! Component: 350 - total flux cleaned = -7.98644e-07 Jy ! Component: 400 - total flux cleaned = -9.54639e-07 Jy ! Component: 450 - total flux cleaned = -1.05575e-06 Jy ! Component: 500 - total flux cleaned = -1.1641e-06 Jy ! Component: 550 - total flux cleaned = 1.18952e-05 Jy ! Component: 600 - total flux cleaned = 2.48056e-05 Jy ! Component: 650 - total flux cleaned = -1.34832e-05 Jy ! Component: 700 - total flux cleaned = 2.44354e-05 Jy ! Component: 750 - total flux cleaned = 1.1885e-05 Jy ! Component: 800 - total flux cleaned = 2.41701e-05 Jy ! Component: 850 - total flux cleaned = -3.84245e-07 Jy ! Component: 900 - total flux cleaned = 3.60694e-05 Jy ! Component: 950 - total flux cleaned = 2.39432e-05 Jy ! Component: 1000 - total flux cleaned = 3.59411e-05 Jy ! Component: 1050 - total flux cleaned = 4.80894e-05 Jy ! Component: 1100 - total flux cleaned = 0.000118681 Jy ! Component: 1150 - total flux cleaned = 0.00011857 Jy ! Component: 1200 - total flux cleaned = 0.000141646 Jy ! Component: 1250 - total flux cleaned = 0.000118624 Jy ! Component: 1300 - total flux cleaned = 0.0001758 Jy ! Component: 1350 - total flux cleaned = 0.000164405 Jy ! Component: 1400 - total flux cleaned = 0.000209519 Jy ! Component: 1450 - total flux cleaned = 0.000209608 Jy ! Component: 1500 - total flux cleaned = 0.000231772 Jy ! Component: 1550 - total flux cleaned = 0.000253871 Jy ! Component: 1600 - total flux cleaned = 0.000209935 Jy ! Component: 1650 - total flux cleaned = 0.000242709 Jy ! Component: 1700 - total flux cleaned = 0.000231873 Jy ! Component: 1750 - total flux cleaned = 0.000242803 Jy ! Component: 1800 - total flux cleaned = 0.000232058 Jy ! Component: 1850 - total flux cleaned = 0.000274822 Jy ! Component: 1900 - total flux cleaned = 0.000264195 Jy ! Component: 1950 - total flux cleaned = 0.000253694 Jy ! Component: 2000 - total flux cleaned = 0.000295739 Jy ! Component: 2050 - total flux cleaned = 0.00030627 Jy ! Component: 2100 - total flux cleaned = 0.000285511 Jy ! Component: 2150 - total flux cleaned = 0.000306154 Jy ! Component: 2200 - total flux cleaned = 0.000306213 Jy ! Component: 2250 - total flux cleaned = 0.00030625 Jy ! Component: 2300 - total flux cleaned = 0.000336773 Jy ! Component: 2350 - total flux cleaned = 0.000326666 Jy ! Component: 2400 - total flux cleaned = 0.000346785 Jy ! Component: 2450 - total flux cleaned = 0.000376901 Jy ! Component: 2500 - total flux cleaned = 0.000327039 Jy ! Component: 2550 - total flux cleaned = 0.000376702 Jy ! Component: 2600 - total flux cleaned = 0.000376644 Jy ! Component: 2650 - total flux cleaned = 0.000356998 Jy ! Component: 2700 - total flux cleaned = 0.000396212 Jy ! Component: 2750 - total flux cleaned = 0.000415694 Jy ! Component: 2800 - total flux cleaned = 0.000415744 Jy ! Component: 2850 - total flux cleaned = 0.000454354 Jy ! Component: 2900 - total flux cleaned = 0.00048319 Jy ! Component: 2950 - total flux cleaned = 0.000492704 Jy ! Component: 3000 - total flux cleaned = 0.000511721 Jy ! Component: 3050 - total flux cleaned = 0.000511716 Jy ! Component: 3100 - total flux cleaned = 0.000521216 Jy ! Component: 3150 - total flux cleaned = 0.000568251 Jy ! Component: 3200 - total flux cleaned = 0.000577562 Jy ! Component: 3250 - total flux cleaned = 0.000568216 Jy ! Component: 3300 - total flux cleaned = 0.000596047 Jy ! Component: 3350 - total flux cleaned = 0.000623819 Jy ! Component: 3400 - total flux cleaned = 0.00068826 Jy ! Component: 3450 - total flux cleaned = 0.000697464 Jy ! Component: 3500 - total flux cleaned = 0.000706604 Jy ! Component: 3550 - total flux cleaned = 0.000715661 Jy ! Component: 3600 - total flux cleaned = 0.000815272 Jy ! Component: 3650 - total flux cleaned = 0.000779145 Jy ! Component: 3700 - total flux cleaned = 0.000788103 Jy ! Component: 3750 - total flux cleaned = 0.000895578 Jy ! Component: 3800 - total flux cleaned = 0.000868809 Jy ! Component: 3850 - total flux cleaned = 0.000868825 Jy ! Component: 3900 - total flux cleaned = 0.000868804 Jy ! Component: 3950 - total flux cleaned = 0.000904127 Jy ! Component: 4000 - total flux cleaned = 0.000939277 Jy ! Component: 4050 - total flux cleaned = 0.000939262 Jy ! Component: 4100 - total flux cleaned = 0.0010004 Jy ! Component: 4150 - total flux cleaned = 0.000965648 Jy ! Component: 4200 - total flux cleaned = 0.0010003 Jy ! Component: 4250 - total flux cleaned = 0.00106078 Jy ! Component: 4300 - total flux cleaned = 0.00106084 Jy ! Component: 4350 - total flux cleaned = 0.00112086 Jy ! Component: 4400 - total flux cleaned = 0.00108669 Jy ! Component: 4450 - total flux cleaned = 0.00107819 Jy ! Component: 4500 - total flux cleaned = 0.00108672 Jy ! Component: 4550 - total flux cleaned = 0.00111211 Jy ! Component: 4600 - total flux cleaned = 0.00114582 Jy ! Component: 4650 - total flux cleaned = 0.00116264 Jy ! Component: 4700 - total flux cleaned = 0.00112082 Jy ! Component: 4750 - total flux cleaned = 0.00115425 Jy ! Component: 4800 - total flux cleaned = 0.00121244 Jy ! Component: 4850 - total flux cleaned = 0.00125386 Jy ! Component: 4900 - total flux cleaned = 0.00121256 Jy ! Component: 4950 - total flux cleaned = 0.00122079 Jy ! Component: 5000 - total flux cleaned = 0.00122081 Jy ! Component: 5050 - total flux cleaned = 0.00124534 Jy ! Component: 5100 - total flux cleaned = 0.00126162 Jy ! Component: 5150 - total flux cleaned = 0.00127795 Jy ! Component: 5200 - total flux cleaned = 0.00133465 Jy ! Component: 5250 - total flux cleaned = 0.00130229 Jy ! Component: 5300 - total flux cleaned = 0.00133454 Jy ! Component: 5350 - total flux cleaned = 0.00135858 Jy ! Component: 5400 - total flux cleaned = 0.00135062 Jy ! Component: 5450 - total flux cleaned = 0.00138256 Jy ! Component: 5500 - total flux cleaned = 0.0013905 Jy ! Component: 5550 - total flux cleaned = 0.00141436 Jy ! Component: 5600 - total flux cleaned = 0.00145385 Jy ! Component: 5650 - total flux cleaned = 0.00146173 Jy ! Component: 5700 - total flux cleaned = 0.00141462 Jy ! Component: 5750 - total flux cleaned = 0.00142246 Jy ! Component: 5800 - total flux cleaned = 0.00148491 Jy ! Component: 5850 - total flux cleaned = 0.00150048 Jy ! Component: 5900 - total flux cleaned = 0.00150822 Jy ! Component: 5950 - total flux cleaned = 0.00152369 Jy ! Component: 6000 - total flux cleaned = 0.00152367 Jy ! Component: 6050 - total flux cleaned = 0.00150834 Jy ! Component: 6100 - total flux cleaned = 0.00153903 Jy ! Component: 6150 - total flux cleaned = 0.00156197 Jy ! Component: 6200 - total flux cleaned = 0.00154673 Jy ! Component: 6250 - total flux cleaned = 0.00156193 Jy ! Component: 6300 - total flux cleaned = 0.00153919 Jy ! Component: 6350 - total flux cleaned = 0.00156182 Jy ! Component: 6400 - total flux cleaned = 0.0015618 Jy ! Component: 6450 - total flux cleaned = 0.00160685 Jy ! Component: 6500 - total flux cleaned = 0.00162933 Jy ! Component: 6550 - total flux cleaned = 0.00162932 Jy ! Component: 6600 - total flux cleaned = 0.00164421 Jy ! Component: 6650 - total flux cleaned = 0.00162194 Jy ! Component: 6700 - total flux cleaned = 0.00160712 Jy ! Component: 6750 - total flux cleaned = 0.00155538 Jy ! Component: 6800 - total flux cleaned = 0.00157012 Jy ! Component: 6850 - total flux cleaned = 0.00157015 Jy ! Component: 6900 - total flux cleaned = 0.00157017 Jy ! Component: 6950 - total flux cleaned = 0.00162132 Jy ! Component: 7000 - total flux cleaned = 0.00162134 Jy ! Component: 7050 - total flux cleaned = 0.00162865 Jy ! Component: 7100 - total flux cleaned = 0.00159964 Jy ! Component: 7150 - total flux cleaned = 0.00161413 Jy ! Component: 7200 - total flux cleaned = 0.00160692 Jy ! Component: 7250 - total flux cleaned = 0.00159254 Jy ! Component: 7300 - total flux cleaned = 0.0016356 Jy ! Component: 7350 - total flux cleaned = 0.00166416 Jy ! Component: 7400 - total flux cleaned = 0.00165697 Jy ! Component: 7450 - total flux cleaned = 0.00163563 Jy ! Component: 7500 - total flux cleaned = 0.00163562 Jy ! Component: 7550 - total flux cleaned = 0.00162853 Jy ! Component: 7600 - total flux cleaned = 0.00167088 Jy ! Component: 7650 - total flux cleaned = 0.00168497 Jy ! Component: 7700 - total flux cleaned = 0.00167091 Jy ! Component: 7750 - total flux cleaned = 0.00166389 Jy ! Component: 7800 - total flux cleaned = 0.00164293 Jy ! Component: 7850 - total flux cleaned = 0.0016987 Jy ! Component: 7900 - total flux cleaned = 0.00169868 Jy ! Component: 7950 - total flux cleaned = 0.00169867 Jy ! Component: 8000 - total flux cleaned = 0.00171247 Jy ! Component: 8050 - total flux cleaned = 0.00169864 Jy ! Component: 8100 - total flux cleaned = 0.00171247 Jy ! Component: 8150 - total flux cleaned = 0.00172622 Jy ! Total flux subtracted in 8192 components = 0.00170567 Jy ! Clean residual min=-0.000460 max=0.000387 Jy/beam ! Clean residual mean=-0.000000 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.755289 Jy keep ! Adding 751 model components to the UV plane model. ! The established model now contains 1557 components and 0.755289 Jy ![Exited script file: muppet] wmap "J1824+5651_L_2010_07_29_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.93 x 8.937 at 1.691 degrees (North through East) ! Clean map min=-0.0006673 max=0.50099 Jy/beam ! Writing clean map to FITS file: J1824+5651_L_2010_07_29_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.50099 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126612 device "J1824+5651_L_2010_07_29_pus\_map.eps/VPS" ! Attempting to open device: 'J1824+5651_L_2010_07_29_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0758174 0.0758174 0.151635 0.303269 0.606539 1.21308 2.42616 4.85231 9.70462 19.4092 38.8185 77.637 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.5 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.93 x 8.937 at 1.691 degrees (North through East) ! Clean map min=-0.0006673 max=0.50099 Jy/beam quit ! Quitting program ! Log file J1824+5651_L_2010_07_29_pus_uvs.log closed on Sat Jan 9 14:58:33 2016