! Started logfile: J1310+3220_L_2010_11_05_pus_uvs.log on Tue Jan 12 12:54:19 2016
obs J1310+3220_L_2010_11_05_pus_uva.fits
! Reading UV FITS file: J1310+3220_L_2010_11_05_pus_uva.fits
! AN table 1: 532 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.644444 visibilities/baseline/integration-bin.
! Found source: J1310+3220
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  1.35446e+09        8e+06          1        8e+06
!  02        2  1.36246e+09        8e+06          1        8e+06
!  03        3  1.42646e+09        8e+06          1        8e+06
!  04        4  1.43446e+09        8e+06          1        8e+06
! 
! Polarization(s): RR LL RL LR
! 
! Read 727 lines of history.
! 
! Reading 246848 visibilities.
select I
! Selecting polarization: I,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.8 
print "taper_size =",taper_size
! taper_size = 15 
![@muppet J1310+3220_L_2010_11_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.800x0.800 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1041 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1027 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1028 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1028 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.551823Jy  sigma=0.007011
! Fit after  self-cal, rms=0.514545Jy  sigma=0.006487
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.258 mas, bmaj=8.862 mas, bpa=-6.981 degrees
! Estimated noise=623.53 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.359883 Jy
! Component: 100  -  total flux cleaned = 0.490533 Jy
! Total flux subtracted in 100 components = 0.490533 Jy
! Clean residual min=-0.017103 max=0.057434 Jy/beam
! Clean residual mean=0.000059 rms=0.004204 Jy/beam
! Combined flux in latest and established models = 0.490533 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.490533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164715Jy  sigma=0.002117
! Fit after  self-cal, rms=0.163833Jy  sigma=0.002110
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0636136 Jy
! Component: 100  -  total flux cleaned = 0.095396 Jy
! Total flux subtracted in 100 components = 0.095396 Jy
! Clean residual min=-0.012768 max=0.041589 Jy/beam
! Clean residual mean=0.000035 rms=0.002950 Jy/beam
! Combined flux in latest and established models = 0.585929 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.585929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119786Jy  sigma=0.001443
! Fit after  self-cal, rms=0.119443Jy  sigma=0.001439
! Inverting map 
! Added new window around map position (-9.6, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394636 Jy
! Component: 100  -  total flux cleaned = 0.0603164 Jy
! Total flux subtracted in 100 components = 0.0603164 Jy
! Clean residual min=-0.009403 max=0.028047 Jy/beam
! Clean residual mean=0.000017 rms=0.002293 Jy/beam
! Combined flux in latest and established models = 0.646245 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.646245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099065Jy  sigma=0.001108
! Fit after  self-cal, rms=0.096057Jy  sigma=0.001068
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204299 Jy
! Component: 100  -  total flux cleaned = 0.0319298 Jy
! Total flux subtracted in 100 components = 0.0319298 Jy
! Clean residual min=-0.007635 max=0.016507 Jy/beam
! Clean residual mean=0.000008 rms=0.001862 Jy/beam
! Combined flux in latest and established models = 0.678175 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 41 components and 0.678175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088970Jy  sigma=0.000944
! Fit after  self-cal, rms=0.087838Jy  sigma=0.000929
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012069 Jy
! Component: 100  -  total flux cleaned = 0.0189881 Jy
! Total flux subtracted in 100 components = 0.0189881 Jy
! Clean residual min=-0.007244 max=0.010908 Jy/beam
! Clean residual mean=0.000002 rms=0.001694 Jy/beam
! Combined flux in latest and established models = 0.697163 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.697163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085106Jy  sigma=0.000880
! Fit after  self-cal, rms=0.084605Jy  sigma=0.000874
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.085 mas, bmaj=11.42 mas, bpa=-4.087 degrees
! Estimated noise=223.928 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121433 Jy
! Component: 100  -  total flux cleaned = 0.018302 Jy
! Component: 150  -  total flux cleaned = 0.0221116 Jy
! Component: 200  -  total flux cleaned = 0.0245879 Jy
! Total flux subtracted in 200 components = 0.0245879 Jy
! Clean residual min=-0.004635 max=0.008636 Jy/beam
! Clean residual mean=-0.000010 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.721751 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 71 components and 0.72175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082825Jy  sigma=0.000845
! Fit after  self-cal, rms=0.082534Jy  sigma=0.000841
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.00*    KP        1.00     
!   LA        1.02     MK        1.11     NL        1.05     OV        0.98     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.00*    KP        1.02     
!   LA        1.06     MK        1.05     NL        1.04     OV        0.99     
!   PT        0.95     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00*    KP        0.90     
!   LA        0.96     MK        0.87     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.00*    KP        0.95     
!   LA        0.97     MK        0.91     NL        1.00     OV        1.02     
!   PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.082534Jy  sigma=0.000841
! Fit after  self-cal, rms=0.069799Jy  sigma=0.000695
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.085 mas, bmaj=11.45 mas, bpa=-4.258 degrees
! Estimated noise=224.724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31.2, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00433075 Jy
! Component: 100  -  total flux cleaned = 0.00539532 Jy
! Component: 150  -  total flux cleaned = 0.00593442 Jy
! Component: 200  -  total flux cleaned = 0.0063045 Jy
! Total flux subtracted in 200 components = 0.0063045 Jy
! Clean residual min=-0.003437 max=0.003519 Jy/beam
! Clean residual mean=0.000007 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.728055 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 88 components and 0.728055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069341Jy  sigma=0.000688
! Fit after  self-cal, rms=0.069288Jy  sigma=0.000687
! Inverting map 
! Added new window around map position (-60, 24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336241 Jy
! Component: 100  -  total flux cleaned = 0.004601 Jy
! Component: 150  -  total flux cleaned = 0.00509387 Jy
! Component: 200  -  total flux cleaned = 0.00539167 Jy
! Total flux subtracted in 200 components = 0.00539167 Jy
! Clean residual min=-0.003049 max=0.002819 Jy/beam
! Clean residual mean=0.000008 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.733447 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 100 components and 0.733446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068986Jy  sigma=0.000683
! Fit after  self-cal, rms=0.068957Jy  sigma=0.000683
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068957Jy  sigma=0.000683
! Fit after  self-cal, rms=0.067908Jy  sigma=0.000655
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.07 mas, bmaj=11.45 mas, bpa=-4.241 degrees
! Estimated noise=224.583 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000867243 Jy
! Component: 100  -  total flux cleaned = 0.00115521 Jy
! Component: 150  -  total flux cleaned = 0.00148953 Jy
! Component: 200  -  total flux cleaned = 0.00168031 Jy
! Total flux subtracted in 200 components = 0.00168031 Jy
! Clean residual min=-0.002162 max=0.002109 Jy/beam
! Clean residual mean=0.000005 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.735127 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 121 components and 0.735127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067712Jy  sigma=0.000653
! Fit after  self-cal, rms=0.067703Jy  sigma=0.000653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-45.6, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145782 Jy
! Component: 100  -  total flux cleaned = 0.00152012 Jy
! Component: 150  -  total flux cleaned = 0.00163629 Jy
! Component: 200  -  total flux cleaned = 0.00163494 Jy
! Total flux subtracted in 200 components = 0.00163494 Jy
! Clean residual min=-0.002095 max=0.001939 Jy/beam
! Clean residual mean=0.000006 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.736762 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 136 components and 0.736762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067555Jy  sigma=0.000652
! Fit after  self-cal, rms=0.067543Jy  sigma=0.000652
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067543Jy  sigma=0.000652
! Fit after  self-cal, rms=0.077594Jy  sigma=0.000637
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.07 mas, bmaj=11.48 mas, bpa=-3.815 degrees
! Estimated noise=224.848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113975 Jy
! Component: 100  -  total flux cleaned = -4.13609e-05 Jy
! Component: 150  -  total flux cleaned = 9.97231e-05 Jy
! Component: 200  -  total flux cleaned = 0.0002903 Jy
! Total flux subtracted in 200 components = 0.0002903 Jy
! Clean residual min=-0.001469 max=0.001559 Jy/beam
! Clean residual mean=0.000000 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.737052 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 150 components and 0.737052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077314Jy  sigma=0.000636
! Fit after  self-cal, rms=0.077345Jy  sigma=0.000635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-46.4, -18.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000938951 Jy
! Component: 100  -  total flux cleaned = 0.00111531 Jy
! Component: 150  -  total flux cleaned = 0.00116959 Jy
! Component: 200  -  total flux cleaned = 0.00127349 Jy
! Total flux subtracted in 200 components = 0.00127349 Jy
! Clean residual min=-0.001495 max=0.001498 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.738325 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 163 components and 0.738325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077172Jy  sigma=0.000635
! Fit after  self-cal, rms=0.077162Jy  sigma=0.000634
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077162Jy  sigma=0.000634
! Fit after  self-cal, rms=0.078096Jy  sigma=0.000634
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.87 mas, bmaj=16.16 mas, bpa=9.59 degrees
! Estimated noise=238.733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000742013 Jy
! Component: 100  -  total flux cleaned = 0.00102576 Jy
! Component: 150  -  total flux cleaned = 0.00127013 Jy
! Component: 200  -  total flux cleaned = 0.00138882 Jy
! Total flux subtracted in 200 components = 0.00138882 Jy
! Clean residual min=-0.000923 max=0.000955 Jy/beam
! Clean residual mean=0.000002 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.739714 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 189 components and 0.739714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078064Jy  sigma=0.000633
! Fit after  self-cal, rms=0.078060Jy  sigma=0.000633
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128951 Jy
! Component: 100  -  total flux cleaned = 0.000198002 Jy
! Component: 150  -  total flux cleaned = 0.000280626 Jy
! Component: 200  -  total flux cleaned = 0.000318033 Jy
! Total flux subtracted in 200 components = 0.000318033 Jy
! Clean residual min=-0.000886 max=0.000950 Jy/beam
! Clean residual mean=0.000003 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.740032 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 200 components and 0.740032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078043Jy  sigma=0.000633
! Fit after  self-cal, rms=0.078037Jy  sigma=0.000633
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.079 mas, bmaj=11.49 mas, bpa=-3.773 degrees
! Estimated noise=225.044 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.079 x 11.49 at -3.773 degrees (North through East)
! Clean map  min=-0.0013265  max=0.48924 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.23 mas, bmaj=8.94 mas, bpa=-6.759 degrees
! Estimated noise=632.874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.365491 Jy
! Component: 100  -  total flux cleaned = 0.502481 Jy
! Component: 150  -  total flux cleaned = 0.577369 Jy
! Component: 200  -  total flux cleaned = 0.624191 Jy
! Total flux subtracted in 200 components = 0.624191 Jy
! Clean residual min=-0.006301 max=0.024399 Jy/beam
! Clean residual mean=0.000022 rms=0.001805 Jy/beam
! Combined flux in latest and established models = 0.624192 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.624192 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.079 mas, bmaj=11.49 mas, bpa=-3.773 degrees
! Estimated noise=225.044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0438184 Jy
! Component: 100  -  total flux cleaned = 0.0656161 Jy
! Component: 150  -  total flux cleaned = 0.0778032 Jy
! Component: 200  -  total flux cleaned = 0.0856629 Jy
! Total flux subtracted in 200 components = 0.0856629 Jy
! Clean residual min=-0.002316 max=0.005479 Jy/beam
! Clean residual mean=-0.000010 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.709855 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 67 components and 0.709855 Jy
! Inverting map 
! Added new window around map position (-16.8, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00609098 Jy
! Component: 100  -  total flux cleaned = 0.0106826 Jy
! Component: 150  -  total flux cleaned = 0.0143272 Jy
! Component: 200  -  total flux cleaned = 0.0162755 Jy
! Total flux subtracted in 200 components = 0.0162755 Jy
! Clean residual min=-0.001873 max=0.002561 Jy/beam
! Clean residual mean=-0.000003 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.72613 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 110 components and 0.72613 Jy
! Inverting map 
! Added new window around map position (6.4, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217278 Jy
! Component: 100  -  total flux cleaned = 0.00331971 Jy
! Component: 150  -  total flux cleaned = 0.00410618 Jy
! Component: 200  -  total flux cleaned = 0.00484015 Jy
! Total flux subtracted in 200 components = 0.00484015 Jy
! Clean residual min=-0.001410 max=0.001515 Jy/beam
! Clean residual mean=-0.000001 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.73097 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 132 components and 0.73097 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.87 mas, bmaj=16.16 mas, bpa=9.59 degrees
! Estimated noise=238.733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199925 Jy
! Component: 100  -  total flux cleaned = 0.00348254 Jy
! Component: 150  -  total flux cleaned = 0.00468042 Jy
! Component: 200  -  total flux cleaned = 0.00566531 Jy
! Total flux subtracted in 200 components = 0.00566531 Jy
! Clean residual min=-0.000913 max=0.001123 Jy/beam
! Clean residual mean=0.000002 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.736636 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567909 Jy
! Component: 100  -  total flux cleaned = 0.000975841 Jy
! Component: 150  -  total flux cleaned = 0.00134143 Jy
! Component: 200  -  total flux cleaned = 0.00162692 Jy
! Total flux subtracted in 200 components = 0.00162692 Jy
! Clean residual min=-0.000862 max=0.001019 Jy/beam
! Clean residual mean=0.000003 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.738262 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 214 components and 0.738263 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.079 mas, bmaj=11.49 mas, bpa=-3.773 degrees
! Estimated noise=225.044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162572 Jy
! Component: 100  -  total flux cleaned = -9.72395e-05 Jy
! Component: 150  -  total flux cleaned = 2.0783e-05 Jy
! Component: 200  -  total flux cleaned = 0.000182202 Jy
! Total flux subtracted in 200 components = 0.000182202 Jy
! Clean residual min=-0.001274 max=0.001123 Jy/beam
! Clean residual mean=0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.738445 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 218 components and 0.738445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077375Jy  sigma=0.000632
! Fit after  self-cal, rms=0.077256Jy  sigma=0.000631
wmodel J1310+3220_L_2010_11_05_pus_map.mod
! Writing 218 model components to file: J1310+3220_L_2010_11_05_pus_map.mod
wobs J1310+3220_L_2010_11_05_pus_uvs.fits
! Writing UV FITS file: J1310+3220_L_2010_11_05_pus_uvs.fits
wwins J1310+3220_L_2010_11_05_pus_map.win
! wwins: Wrote 8 windows to J1310+3220_L_2010_11_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000413688 Jy
! Component: 100  -  total flux cleaned = -0.000754658 Jy
! Component: 150  -  total flux cleaned = -0.00108299 Jy
! Component: 200  -  total flux cleaned = -0.00124251 Jy
! Component: 250  -  total flux cleaned = -0.00128144 Jy
! Component: 300  -  total flux cleaned = -0.00131965 Jy
! Component: 350  -  total flux cleaned = -0.00137587 Jy
! Component: 400  -  total flux cleaned = -0.00141254 Jy
! Component: 450  -  total flux cleaned = -0.00139386 Jy
! Component: 500  -  total flux cleaned = -0.00137571 Jy
! Component: 550  -  total flux cleaned = -0.00134015 Jy
! Component: 600  -  total flux cleaned = -0.00134025 Jy
! Component: 650  -  total flux cleaned = -0.00135768 Jy
! Component: 700  -  total flux cleaned = -0.00134047 Jy
! Component: 750  -  total flux cleaned = -0.00130673 Jy
! Component: 800  -  total flux cleaned = -0.00130672 Jy
! Component: 850  -  total flux cleaned = -0.00129012 Jy
! Component: 900  -  total flux cleaned = -0.00122411 Jy
! Component: 950  -  total flux cleaned = -0.00127359 Jy
! Component: 1000  -  total flux cleaned = -0.0012406 Jy
! Component: 1050  -  total flux cleaned = -0.00117572 Jy
! Component: 1100  -  total flux cleaned = -0.00112741 Jy
! Component: 1150  -  total flux cleaned = -0.00112742 Jy
! Component: 1200  -  total flux cleaned = -0.00104786 Jy
! Component: 1250  -  total flux cleaned = -0.00106374 Jy
! Component: 1300  -  total flux cleaned = -0.000985244 Jy
! Component: 1350  -  total flux cleaned = -0.000938656 Jy
! Component: 1400  -  total flux cleaned = -0.00093865 Jy
! Component: 1450  -  total flux cleaned = -0.000954041 Jy
! Component: 1500  -  total flux cleaned = -0.000861946 Jy
! Component: 1550  -  total flux cleaned = -0.000846772 Jy
! Component: 1600  -  total flux cleaned = -0.000861975 Jy
! Component: 1650  -  total flux cleaned = -0.000831755 Jy
! Component: 1700  -  total flux cleaned = -0.000816671 Jy
! Component: 1750  -  total flux cleaned = -0.000771638 Jy
! Component: 1800  -  total flux cleaned = -0.000786497 Jy
! Component: 1850  -  total flux cleaned = -0.000771728 Jy
! Component: 1900  -  total flux cleaned = -0.000727459 Jy
! Component: 1950  -  total flux cleaned = -0.000668891 Jy
! Component: 2000  -  total flux cleaned = -0.000625017 Jy
! Component: 2050  -  total flux cleaned = -0.000639485 Jy
! Component: 2100  -  total flux cleaned = -0.000610512 Jy
! Component: 2150  -  total flux cleaned = -0.000596088 Jy
! Component: 2200  -  total flux cleaned = -0.000624786 Jy
! Component: 2250  -  total flux cleaned = -0.000481799 Jy
! Component: 2300  -  total flux cleaned = -0.000496148 Jy
! Component: 2350  -  total flux cleaned = -0.00051036 Jy
! Component: 2400  -  total flux cleaned = -0.000439801 Jy
! Component: 2450  -  total flux cleaned = -0.00045392 Jy
! Component: 2500  -  total flux cleaned = -0.000411813 Jy
! Component: 2550  -  total flux cleaned = -0.000411853 Jy
! Component: 2600  -  total flux cleaned = -0.000342361 Jy
! Component: 2650  -  total flux cleaned = -0.000300712 Jy
! Component: 2700  -  total flux cleaned = -0.000286869 Jy
! Component: 2750  -  total flux cleaned = -0.000273071 Jy
! Component: 2800  -  total flux cleaned = -0.000231801 Jy
! Component: 2850  -  total flux cleaned = -0.000204493 Jy
! Component: 2900  -  total flux cleaned = -0.000163697 Jy
! Component: 2950  -  total flux cleaned = -0.000190871 Jy
! Component: 3000  -  total flux cleaned = -0.000177388 Jy
! Component: 3050  -  total flux cleaned = -0.000123358 Jy
! Component: 3100  -  total flux cleaned = -8.30465e-05 Jy
! Component: 3150  -  total flux cleaned = -4.28208e-05 Jy
! Component: 3200  -  total flux cleaned = -1.60815e-05 Jy
! Component: 3250  -  total flux cleaned = -2.93308e-05 Jy
! Component: 3300  -  total flux cleaned = -2.93426e-05 Jy
! Component: 3350  -  total flux cleaned = -2.93216e-05 Jy
! Component: 3400  -  total flux cleaned = 1.02691e-05 Jy
! Component: 3450  -  total flux cleaned = 4.97966e-05 Jy
! Component: 3500  -  total flux cleaned = 4.98099e-05 Jy
! Component: 3550  -  total flux cleaned = 8.91102e-05 Jy
! Component: 3600  -  total flux cleaned = 0.000102082 Jy
! Component: 3650  -  total flux cleaned = 7.60571e-05 Jy
! Component: 3700  -  total flux cleaned = 0.000140819 Jy
! Component: 3750  -  total flux cleaned = 0.000114936 Jy
! Component: 3800  -  total flux cleaned = 0.000153611 Jy
! Component: 3850  -  total flux cleaned = 0.000179401 Jy
! Component: 3900  -  total flux cleaned = 0.00017942 Jy
! Component: 3950  -  total flux cleaned = 0.000230522 Jy
! Component: 4000  -  total flux cleaned = 0.000281525 Jy
! Component: 4050  -  total flux cleaned = 0.00025608 Jy
! Total flux subtracted in 4096 components = 0.000268768 Jy
! Clean residual min=-0.000665 max=0.000806 Jy/beam
! Clean residual mean=0.000002 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.738714 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 489 components and 0.738714 Jy
![Exited script file: muppet]
wmap "J1310+3220_L_2010_11_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.079 x 11.49 at -3.773 degrees (North through East)
! Clean map  min=-0.0011598  max=0.4887 Jy/beam
! Writing clean map to FITS file: J1310+3220_L_2010_11_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.488696 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000231193 
device "J1310+3220_L_2010_11_05_pus\_map.eps/VPS"
! Attempting to open device: 'J1310+3220_L_2010_11_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.141924 0.141924 0.283848 0.567696 1.13539 2.27079 4.54157 9.08314 18.1663 36.3326 72.6651
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.488 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.079 x 11.49 at -3.773 degrees (North through East)
! Clean map  min=-0.0011598  max=0.4887 Jy/beam
quit
! Quitting program
! Log file J1310+3220_L_2010_11_05_pus_uvs.log closed on Tue Jan 12 12:54:38 2016