! Started logfile: J1215-1731_L_2010_08_23_pus_uvs.log on Sun Jan 10 01:04:08 2016 obs J1215-1731_L_2010_08_23_pus_uva.fits ! Reading UV FITS file: J1215-1731_L_2010_08_23_pus_uva.fits ! AN table 1: 529 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733501 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 1.35446e+09 8e+06 1 8e+06 ! 02 2 1.36246e+09 8e+06 1 8e+06 ! 03 3 1.42646e+09 8e+06 1 8e+06 ! 04 4 1.43446e+09 8e+06 1 8e+06 ! ! Polarization(s): RR LL RL LR ! ! Read 783 lines of history. ! ! Reading 279376 visibilities. select I ! Selecting polarization: I, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 2048 print "field_cell =",field_cell ! field_cell = 0.8 print "taper_size =",taper_size ! taper_size = 15 ![@muppet J1215-1731_L_2010_08_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 2048x2048 pixels with 0.800x0.800 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 731 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 731 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 732 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 731 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.321380Jy sigma=0.003582 ! Fit after self-cal, rms=0.252991Jy sigma=0.002824 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.481 mas, bmaj=11.37 mas, bpa=4.39 degrees ! Estimated noise=540.386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.608966 Jy ! Component: 100 - total flux cleaned = 0.753623 Jy ! Total flux subtracted in 100 components = 0.753623 Jy ! Clean residual min=-0.020397 max=0.073232 Jy/beam ! Clean residual mean=0.000003 rms=0.004471 Jy/beam ! Combined flux in latest and established models = 0.753623 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.753623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213583Jy sigma=0.002402 ! Fit after self-cal, rms=0.213629Jy sigma=0.002401 ! Inverting map ! Added new window around map position (8, -4.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726078 Jy ! Component: 100 - total flux cleaned = 0.118992 Jy ! Total flux subtracted in 100 components = 0.118992 Jy ! Clean residual min=-0.017605 max=0.046176 Jy/beam ! Clean residual mean=0.000005 rms=0.003418 Jy/beam ! Combined flux in latest and established models = 0.872615 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.872615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165969Jy sigma=0.001758 ! Fit after self-cal, rms=0.162430Jy sigma=0.001732 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392285 Jy ! Component: 100 - total flux cleaned = 0.0649406 Jy ! Total flux subtracted in 100 components = 0.0649406 Jy ! Clean residual min=-0.013973 max=0.031652 Jy/beam ! Clean residual mean=0.000006 rms=0.002823 Jy/beam ! Combined flux in latest and established models = 0.937556 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.937556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143234Jy sigma=0.001462 ! Fit after self-cal, rms=0.141630Jy sigma=0.001450 ! Inverting map ! Added new window around map position (19.2, -5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296499 Jy ! Component: 100 - total flux cleaned = 0.0499982 Jy ! Total flux subtracted in 100 components = 0.0499982 Jy ! Clean residual min=-0.011893 max=0.024744 Jy/beam ! Clean residual mean=0.000007 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 0.987554 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.987554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130063Jy sigma=0.001279 ! Fit after self-cal, rms=0.128825Jy sigma=0.001269 ! Inverting map ! Added new window around map position (-6.4, 9.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217358 Jy ! Component: 100 - total flux cleaned = 0.0384438 Jy ! Total flux subtracted in 100 components = 0.0384438 Jy ! Clean residual min=-0.009869 max=0.014848 Jy/beam ! Clean residual mean=0.000007 rms=0.002206 Jy/beam ! Combined flux in latest and established models = 1.026 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 1.026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122066Jy sigma=0.001177 ! Fit after self-cal, rms=0.122004Jy sigma=0.001176 ! Inverting map ! Added new window around map position (24.8, -12.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164032 Jy ! Component: 100 - total flux cleaned = 0.029112 Jy ! Total flux subtracted in 100 components = 0.029112 Jy ! Clean residual min=-0.009179 max=0.011434 Jy/beam ! Clean residual mean=0.000008 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 1.05511 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 1.05511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118186Jy sigma=0.001122 ! Fit after self-cal, rms=0.118019Jy sigma=0.001121 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.929 mas, bmaj=14.24 mas, bpa=5.254 degrees ! Estimated noise=236.066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (179.2, -107.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256808 Jy ! Component: 100 - total flux cleaned = 0.0446683 Jy ! Component: 150 - total flux cleaned = 0.0600725 Jy ! Component: 200 - total flux cleaned = 0.072975 Jy ! Total flux subtracted in 200 components = 0.072975 Jy ! Clean residual min=-0.010215 max=0.013264 Jy/beam ! Clean residual mean=0.000024 rms=0.002535 Jy/beam ! Combined flux in latest and established models = 1.12809 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 136 components and 1.12809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110466Jy sigma=0.000990 ! Fit after self-cal, rms=0.109677Jy sigma=0.000982 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.00* KP 0.99 ! LA 1.02 MK 1.05 NL 1.05 OV 0.98 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.00* KP 1.01 ! LA 1.06 MK 1.06 NL 1.03 OV 0.98 ! PT 0.96 SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00* KP 0.88 ! LA 0.95 MK 0.93 NL 0.99 OV 1.00 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00* KP 0.95 ! LA 0.98 MK 0.98 NL 0.99 OV 1.02 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.109677Jy sigma=0.000982 ! Fit after self-cal, rms=0.089309Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.966 mas, bmaj=14.35 mas, bpa=5.198 degrees ! Estimated noise=236.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (166.4, -109.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126731 Jy ! Component: 100 - total flux cleaned = 0.0221339 Jy ! Component: 150 - total flux cleaned = 0.0286672 Jy ! Component: 200 - total flux cleaned = 0.0344882 Jy ! Total flux subtracted in 200 components = 0.0344882 Jy ! Clean residual min=-0.005820 max=0.008943 Jy/beam ! Clean residual mean=0.000012 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 1.16257 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 186 components and 1.16257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086582Jy sigma=0.000722 ! Fit after self-cal, rms=0.086288Jy sigma=0.000719 ! Inverting map ! Added new window around map position (176.8, -66.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866719 Jy ! Component: 100 - total flux cleaned = 0.0142163 Jy ! Component: 150 - total flux cleaned = 0.0193122 Jy ! Component: 200 - total flux cleaned = 0.02361 Jy ! Total flux subtracted in 200 components = 0.02361 Jy ! Clean residual min=-0.005353 max=0.006803 Jy/beam ! Clean residual mean=0.000009 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 1.18618 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 225 components and 1.18618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084813Jy sigma=0.000695 ! Fit after self-cal, rms=0.084625Jy sigma=0.000694 ! Inverting map ! Added new window around map position (36.8, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595745 Jy ! Component: 100 - total flux cleaned = 0.0098295 Jy ! Component: 150 - total flux cleaned = 0.0132872 Jy ! Component: 200 - total flux cleaned = 0.0154576 Jy ! Total flux subtracted in 200 components = 0.0154576 Jy ! Clean residual min=-0.004837 max=0.005636 Jy/beam ! Clean residual mean=0.000007 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 1.20164 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 257 components and 1.20164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083493Jy sigma=0.000680 ! Fit after self-cal, rms=0.083372Jy sigma=0.000679 ! Inverting map ! Added new window around map position (196, -104). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563712 Jy ! Component: 100 - total flux cleaned = 0.00846233 Jy ! Component: 150 - total flux cleaned = 0.0111759 Jy ! Component: 200 - total flux cleaned = 0.0129577 Jy ! Total flux subtracted in 200 components = 0.0129577 Jy ! Clean residual min=-0.004690 max=0.003869 Jy/beam ! Clean residual mean=0.000005 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 1.2146 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 284 components and 1.2146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082381Jy sigma=0.000669 ! Fit after self-cal, rms=0.082292Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082292Jy sigma=0.000668 ! Fit after self-cal, rms=0.079401Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.982 mas, bmaj=14.36 mas, bpa=5.221 degrees ! Estimated noise=236.483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290376 Jy ! Component: 100 - total flux cleaned = 0.0016675 Jy ! Component: 150 - total flux cleaned = 0.00333602 Jy ! Component: 200 - total flux cleaned = 0.00451044 Jy ! Total flux subtracted in 200 components = 0.00451044 Jy ! Clean residual min=-0.004280 max=0.003531 Jy/beam ! Clean residual mean=0.000006 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 1.21911 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 318 components and 1.21911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078441Jy sigma=0.000653 ! Fit after self-cal, rms=0.078369Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126344 Jy ! Component: 100 - total flux cleaned = 0.00247878 Jy ! Component: 150 - total flux cleaned = 0.00351592 Jy ! Component: 200 - total flux cleaned = 0.00461261 Jy ! Total flux subtracted in 200 components = 0.00461261 Jy ! Clean residual min=-0.003989 max=0.003431 Jy/beam ! Clean residual mean=0.000005 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 1.22372 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 335 components and 1.22372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077813Jy sigma=0.000648 ! Fit after self-cal, rms=0.077758Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077758Jy sigma=0.000648 ! Fit after self-cal, rms=0.064704Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.982 mas, bmaj=14.29 mas, bpa=5.035 degrees ! Estimated noise=235.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001827 Jy ! Component: 100 - total flux cleaned = 0.00315392 Jy ! Component: 150 - total flux cleaned = 0.00443762 Jy ! Component: 200 - total flux cleaned = 0.00530572 Jy ! Total flux subtracted in 200 components = 0.00530572 Jy ! Clean residual min=-0.004068 max=0.003412 Jy/beam ! Clean residual mean=0.000004 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 1.22903 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 363 components and 1.22903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064287Jy sigma=0.000612 ! Fit after self-cal, rms=0.064203Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496823 Jy ! Component: 100 - total flux cleaned = 0.00185088 Jy ! Component: 150 - total flux cleaned = 0.00308671 Jy ! Component: 200 - total flux cleaned = 0.00400909 Jy ! Total flux subtracted in 200 components = 0.00400909 Jy ! Clean residual min=-0.003649 max=0.003326 Jy/beam ! Clean residual mean=0.000003 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 1.23304 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 390 components and 1.23304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063961Jy sigma=0.000608 ! Fit after self-cal, rms=0.063907Jy sigma=0.000608 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063907Jy sigma=0.000608 ! Fit after self-cal, rms=0.063543Jy sigma=0.000607 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.16 mas, bmaj=23.66 mas, bpa=4.73 degrees ! Estimated noise=259.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193254 Jy ! Component: 100 - total flux cleaned = 0.00360311 Jy ! Component: 150 - total flux cleaned = 0.00512038 Jy ! Component: 200 - total flux cleaned = 0.00651853 Jy ! Total flux subtracted in 200 components = 0.00651853 Jy ! Clean residual min=-0.003176 max=0.002948 Jy/beam ! Clean residual mean=0.000003 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 1.23956 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 433 components and 1.23956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063377Jy sigma=0.000605 ! Fit after self-cal, rms=0.063341Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530799 Jy ! Component: 100 - total flux cleaned = 0.0017672 Jy ! Component: 150 - total flux cleaned = 0.00281266 Jy ! Component: 200 - total flux cleaned = 0.00341557 Jy ! Total flux subtracted in 200 components = 0.00341557 Jy ! Clean residual min=-0.002971 max=0.002951 Jy/beam ! Clean residual mean=0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 1.24297 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 452 components and 1.24297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063249Jy sigma=0.000604 ! Fit after self-cal, rms=0.063219Jy sigma=0.000604 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.985 mas, bmaj=14.29 mas, bpa=5.009 degrees ! Estimated noise=236.057 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.985 x 14.29 at 5.009 degrees (North through East) ! Clean map min=-0.0034408 max=0.77644 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063219Jy sigma=0.000604 ! Fit after self-cal, rms=0.056337Jy sigma=0.000546 ! Inverting map and beam ! Estimated beam: bmin=5.986 mas, bmaj=14.28 mas, bpa=4.973 degrees ! Estimated noise=236.113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000685938 Jy ! Component: 100 - total flux cleaned = 0.000755413 Jy ! Component: 150 - total flux cleaned = 0.00082156 Jy ! Component: 200 - total flux cleaned = 0.0010104 Jy ! Total flux subtracted in 200 components = 0.0010104 Jy ! Clean residual min=-0.003013 max=0.003136 Jy/beam ! Clean residual mean=0.000002 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 1.24398 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 465 components and 1.24398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056103Jy sigma=0.000544 ! Fit after self-cal, rms=0.056071Jy sigma=0.000544 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.31904e-05 Jy ! Component: 100 - total flux cleaned = 0.000221903 Jy ! Component: 150 - total flux cleaned = 0.000448177 Jy ! Component: 200 - total flux cleaned = 0.000662095 Jy ! Total flux subtracted in 200 components = 0.000662095 Jy ! Clean residual min=-0.002812 max=0.003065 Jy/beam ! Clean residual mean=0.000002 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 1.24464 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 474 components and 1.24464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055918Jy sigma=0.000543 ! Fit after self-cal, rms=0.055887Jy sigma=0.000542 ! Inverting map ! Added new window around map position (48, 87.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200852 Jy ! Component: 100 - total flux cleaned = 0.00290302 Jy ! Component: 150 - total flux cleaned = 0.00357441 Jy ! Component: 200 - total flux cleaned = 0.00414487 Jy ! Total flux subtracted in 200 components = 0.00414487 Jy ! Clean residual min=-0.002627 max=0.002194 Jy/beam ! Clean residual mean=0.000002 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 1.24879 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 488 components and 1.24879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055700Jy sigma=0.000540 ! Fit after self-cal, rms=0.055685Jy sigma=0.000540 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055685Jy sigma=0.000540 ! Fit after self-cal, rms=0.055569Jy sigma=0.000540 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.515 mas, bmaj=11.32 mas, bpa=4.064 degrees ! Estimated noise=545.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.612551 Jy ! Component: 100 - total flux cleaned = 0.770424 Jy ! Component: 150 - total flux cleaned = 0.849563 Jy ! Component: 200 - total flux cleaned = 0.897798 Jy ! Total flux subtracted in 200 components = 0.897798 Jy ! Clean residual min=-0.010774 max=0.026692 Jy/beam ! Clean residual mean=0.000004 rms=0.002271 Jy/beam ! Combined flux in latest and established models = 0.897798 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.897798 Jy ! Inverting map and beam ! Estimated beam: bmin=5.988 mas, bmaj=14.28 mas, bpa=4.951 degrees ! Estimated noise=236.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.8, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0595487 Jy ! Component: 100 - total flux cleaned = 0.0975454 Jy ! Component: 150 - total flux cleaned = 0.126867 Jy ! Component: 200 - total flux cleaned = 0.151321 Jy ! Total flux subtracted in 200 components = 0.151321 Jy ! Clean residual min=-0.010046 max=0.015048 Jy/beam ! Clean residual mean=0.000023 rms=0.002802 Jy/beam ! Combined flux in latest and established models = 1.04912 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 127 components and 1.04912 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208562 Jy ! Component: 100 - total flux cleaned = 0.0388039 Jy ! Component: 150 - total flux cleaned = 0.0543939 Jy ! Component: 200 - total flux cleaned = 0.0680833 Jy ! Total flux subtracted in 200 components = 0.0680833 Jy ! Clean residual min=-0.006832 max=0.008573 Jy/beam ! Clean residual mean=0.000016 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 1.1172 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 217 components and 1.1172 Jy ! Inverting map ! Added new window around map position (-11.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121229 Jy ! Component: 100 - total flux cleaned = 0.0229158 Jy ! Component: 150 - total flux cleaned = 0.0325662 Jy ! Component: 200 - total flux cleaned = 0.0412395 Jy ! Total flux subtracted in 200 components = 0.0412395 Jy ! Clean residual min=-0.005060 max=0.005707 Jy/beam ! Clean residual mean=0.000012 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 1.15844 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 311 components and 1.15844 Jy ! Inverting map ! Added new window around map position (164.8, -83.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784164 Jy ! Component: 100 - total flux cleaned = 0.0143952 Jy ! Component: 150 - total flux cleaned = 0.0201248 Jy ! Component: 200 - total flux cleaned = 0.0251436 Jy ! Total flux subtracted in 200 components = 0.0251436 Jy ! Clean residual min=-0.004154 max=0.004111 Jy/beam ! Clean residual mean=0.000009 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 1.18358 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 383 components and 1.18358 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.16 mas, bmaj=23.65 mas, bpa=4.672 degrees ! Estimated noise=259.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792453 Jy ! Component: 100 - total flux cleaned = 0.0146064 Jy ! Component: 150 - total flux cleaned = 0.0204001 Jy ! Component: 200 - total flux cleaned = 0.0250845 Jy ! Total flux subtracted in 200 components = 0.0250845 Jy ! Clean residual min=-0.004224 max=0.003619 Jy/beam ! Clean residual mean=0.000009 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 1.20867 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395976 Jy ! Component: 100 - total flux cleaned = 0.00733853 Jy ! Component: 150 - total flux cleaned = 0.0105447 Jy ! Component: 200 - total flux cleaned = 0.0134609 Jy ! Total flux subtracted in 200 components = 0.0134609 Jy ! Clean residual min=-0.003493 max=0.003167 Jy/beam ! Clean residual mean=0.000006 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 1.22213 Jy ! Adding 214 model components to the UV plane model. ! The established model now contains 575 components and 1.22213 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.988 mas, bmaj=14.28 mas, bpa=4.951 degrees ! Estimated noise=236.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813333 Jy ! Component: 100 - total flux cleaned = 0.00106204 Jy ! Component: 150 - total flux cleaned = 0.00161988 Jy ! Component: 200 - total flux cleaned = 0.00223332 Jy ! Total flux subtracted in 200 components = 0.00223332 Jy ! Clean residual min=-0.002684 max=0.002624 Jy/beam ! Clean residual mean=0.000004 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 1.22436 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 601 components and 1.22436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056222Jy sigma=0.000546 ! Fit after self-cal, rms=0.056013Jy sigma=0.000544 wmodel J1215-1731_L_2010_08_23_pus_map.mod ! Writing 601 model components to file: J1215-1731_L_2010_08_23_pus_map.mod wobs J1215-1731_L_2010_08_23_pus_uvs.fits ! Writing UV FITS file: J1215-1731_L_2010_08_23_pus_uvs.fits wwins J1215-1731_L_2010_08_23_pus_map.win ! wwins: Wrote 14 windows to J1215-1731_L_2010_08_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=8192 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.19107e-05 Jy ! Component: 100 - total flux cleaned = -0.00029536 Jy ! Component: 150 - total flux cleaned = -0.000628167 Jy ! Component: 200 - total flux cleaned = -0.000841541 Jy ! Component: 250 - total flux cleaned = -0.00104843 Jy ! Component: 300 - total flux cleaned = -0.00111614 Jy ! Component: 350 - total flux cleaned = -0.00121486 Jy ! Component: 400 - total flux cleaned = -0.00115002 Jy ! Component: 450 - total flux cleaned = -0.00102339 Jy ! Component: 500 - total flux cleaned = -0.000837083 Jy ! Component: 550 - total flux cleaned = -0.000623522 Jy ! Component: 600 - total flux cleaned = -0.000503483 Jy ! Component: 650 - total flux cleaned = -0.000325592 Jy ! Component: 700 - total flux cleaned = -0.000179502 Jy ! Component: 750 - total flux cleaned = 2.24833e-05 Jy ! Component: 800 - total flux cleaned = 0.000164734 Jy ! Component: 850 - total flux cleaned = 0.000249528 Jy ! Component: 900 - total flux cleaned = 0.00052636 Jy ! Component: 950 - total flux cleaned = 0.000690683 Jy ! Component: 1000 - total flux cleaned = 0.000906973 Jy ! Component: 1050 - total flux cleaned = 0.000986828 Jy ! Component: 1100 - total flux cleaned = 0.00106663 Jy ! Component: 1150 - total flux cleaned = 0.00122416 Jy ! Component: 1200 - total flux cleaned = 0.00143158 Jy ! Component: 1250 - total flux cleaned = 0.00150874 Jy ! Component: 1300 - total flux cleaned = 0.0016103 Jy ! Component: 1350 - total flux cleaned = 0.00178672 Jy ! Component: 1400 - total flux cleaned = 0.00183662 Jy ! Component: 1450 - total flux cleaned = 0.00193554 Jy ! Component: 1500 - total flux cleaned = 0.00200864 Jy ! Component: 1550 - total flux cleaned = 0.00210637 Jy ! Component: 1600 - total flux cleaned = 0.00225133 Jy ! Component: 1650 - total flux cleaned = 0.0022989 Jy ! Component: 1700 - total flux cleaned = 0.0023702 Jy ! Component: 1750 - total flux cleaned = 0.0024176 Jy ! Component: 1800 - total flux cleaned = 0.00253463 Jy ! Component: 1850 - total flux cleaned = 0.00262777 Jy ! Component: 1900 - total flux cleaned = 0.00262819 Jy ! Component: 1950 - total flux cleaned = 0.00267399 Jy ! Component: 2000 - total flux cleaned = 0.00271951 Jy ! Component: 2050 - total flux cleaned = 0.00274199 Jy ! Component: 2100 - total flux cleaned = 0.00283147 Jy ! Component: 2150 - total flux cleaned = 0.00280931 Jy ! Component: 2200 - total flux cleaned = 0.00294227 Jy ! Component: 2250 - total flux cleaned = 0.00294229 Jy ! Component: 2300 - total flux cleaned = 0.00302948 Jy ! Component: 2350 - total flux cleaned = 0.00298632 Jy ! Component: 2400 - total flux cleaned = 0.00305099 Jy ! Component: 2450 - total flux cleaned = 0.00320085 Jy ! Component: 2500 - total flux cleaned = 0.00315836 Jy ! Component: 2550 - total flux cleaned = 0.00322151 Jy ! Component: 2600 - total flux cleaned = 0.00322141 Jy ! Component: 2650 - total flux cleaned = 0.0033259 Jy ! Component: 2700 - total flux cleaned = 0.0032432 Jy ! Component: 2750 - total flux cleaned = 0.00338774 Jy ! Component: 2800 - total flux cleaned = 0.00342874 Jy ! Component: 2850 - total flux cleaned = 0.00332632 Jy ! Component: 2900 - total flux cleaned = 0.00342787 Jy ! Component: 2950 - total flux cleaned = 0.00344807 Jy ! Component: 3000 - total flux cleaned = 0.00342809 Jy ! Component: 3050 - total flux cleaned = 0.00346818 Jy ! Component: 3100 - total flux cleaned = 0.00350766 Jy ! Component: 3150 - total flux cleaned = 0.00346792 Jy ! Component: 3200 - total flux cleaned = 0.00360543 Jy ! Component: 3250 - total flux cleaned = 0.00366412 Jy ! Component: 3300 - total flux cleaned = 0.00370298 Jy ! Component: 3350 - total flux cleaned = 0.00362546 Jy ! Component: 3400 - total flux cleaned = 0.00368329 Jy ! Component: 3450 - total flux cleaned = 0.00372168 Jy ! Component: 3500 - total flux cleaned = 0.00374079 Jy ! Component: 3550 - total flux cleaned = 0.003741 Jy ! Component: 3600 - total flux cleaned = 0.00374107 Jy ! Component: 3650 - total flux cleaned = 0.0037973 Jy ! Component: 3700 - total flux cleaned = 0.00379702 Jy ! Component: 3750 - total flux cleaned = 0.00389015 Jy ! Component: 3800 - total flux cleaned = 0.0038348 Jy ! Component: 3850 - total flux cleaned = 0.00377939 Jy ! Component: 3900 - total flux cleaned = 0.00385282 Jy ! Component: 3950 - total flux cleaned = 0.00383473 Jy ! Component: 4000 - total flux cleaned = 0.00388929 Jy ! Component: 4050 - total flux cleaned = 0.00396163 Jy ! Component: 4100 - total flux cleaned = 0.00394377 Jy ! Component: 4150 - total flux cleaned = 0.00403334 Jy ! Component: 4200 - total flux cleaned = 0.00399775 Jy ! Component: 4250 - total flux cleaned = 0.00392666 Jy ! Component: 4300 - total flux cleaned = 0.00396199 Jy ! Component: 4350 - total flux cleaned = 0.00397951 Jy ! Component: 4400 - total flux cleaned = 0.00408438 Jy ! Component: 4450 - total flux cleaned = 0.00415399 Jy ! Component: 4500 - total flux cleaned = 0.00417134 Jy ! Component: 4550 - total flux cleaned = 0.00420581 Jy ! Component: 4600 - total flux cleaned = 0.00410263 Jy ! Component: 4650 - total flux cleaned = 0.00413699 Jy ! Component: 4700 - total flux cleaned = 0.00423926 Jy ! Component: 4750 - total flux cleaned = 0.00422229 Jy ! Component: 4800 - total flux cleaned = 0.00434045 Jy ! Component: 4850 - total flux cleaned = 0.00432375 Jy ! Component: 4900 - total flux cleaned = 0.00440746 Jy ! Component: 4950 - total flux cleaned = 0.00440741 Jy ! Component: 5000 - total flux cleaned = 0.00442409 Jy ! Component: 5050 - total flux cleaned = 0.00453983 Jy ! Component: 5100 - total flux cleaned = 0.00458918 Jy ! Component: 5150 - total flux cleaned = 0.00452348 Jy ! Component: 5200 - total flux cleaned = 0.00457244 Jy ! Component: 5250 - total flux cleaned = 0.00470255 Jy ! Component: 5300 - total flux cleaned = 0.00471885 Jy ! Component: 5350 - total flux cleaned = 0.00470267 Jy ! Component: 5400 - total flux cleaned = 0.00478304 Jy ! Component: 5450 - total flux cleaned = 0.0048792 Jy ! Component: 5500 - total flux cleaned = 0.00489512 Jy ! Component: 5550 - total flux cleaned = 0.00491095 Jy ! Component: 5600 - total flux cleaned = 0.00497422 Jy ! Component: 5650 - total flux cleaned = 0.0050057 Jy ! Component: 5700 - total flux cleaned = 0.00498997 Jy ! Component: 5750 - total flux cleaned = 0.00503682 Jy ! Component: 5800 - total flux cleaned = 0.00514588 Jy ! Component: 5850 - total flux cleaned = 0.0051304 Jy ! Component: 5900 - total flux cleaned = 0.00514596 Jy ! Component: 5950 - total flux cleaned = 0.00516144 Jy ! Component: 6000 - total flux cleaned = 0.0052229 Jy ! Component: 6050 - total flux cleaned = 0.00525347 Jy ! Component: 6100 - total flux cleaned = 0.00525352 Jy ! Component: 6150 - total flux cleaned = 0.00531411 Jy ! Component: 6200 - total flux cleaned = 0.00540472 Jy ! Component: 6250 - total flux cleaned = 0.00541985 Jy ! Component: 6300 - total flux cleaned = 0.00538979 Jy ! Component: 6350 - total flux cleaned = 0.00537477 Jy ! Component: 6400 - total flux cleaned = 0.00544915 Jy ! Component: 6450 - total flux cleaned = 0.00543449 Jy ! Component: 6500 - total flux cleaned = 0.00543445 Jy ! Component: 6550 - total flux cleaned = 0.00541971 Jy ! Component: 6600 - total flux cleaned = 0.00543449 Jy ! Component: 6650 - total flux cleaned = 0.00546377 Jy ! Component: 6700 - total flux cleaned = 0.00539082 Jy ! Component: 6750 - total flux cleaned = 0.00536181 Jy ! Component: 6800 - total flux cleaned = 0.00544875 Jy ! Component: 6850 - total flux cleaned = 0.00549202 Jy ! Component: 6900 - total flux cleaned = 0.00549196 Jy ! Component: 6950 - total flux cleaned = 0.00547757 Jy ! Component: 7000 - total flux cleaned = 0.00547764 Jy ! Component: 7050 - total flux cleaned = 0.00547761 Jy ! Component: 7100 - total flux cleaned = 0.00547749 Jy ! Component: 7150 - total flux cleaned = 0.00550584 Jy ! Component: 7200 - total flux cleaned = 0.00549156 Jy ! Component: 7250 - total flux cleaned = 0.00553372 Jy ! Component: 7300 - total flux cleaned = 0.00546369 Jy ! Component: 7350 - total flux cleaned = 0.00544977 Jy ! Component: 7400 - total flux cleaned = 0.00550544 Jy ! Component: 7450 - total flux cleaned = 0.00544997 Jy ! Component: 7500 - total flux cleaned = 0.00544987 Jy ! Component: 7550 - total flux cleaned = 0.00542233 Jy ! Component: 7600 - total flux cleaned = 0.00546352 Jy ! Component: 7650 - total flux cleaned = 0.00550457 Jy ! Component: 7700 - total flux cleaned = 0.005491 Jy ! Component: 7750 - total flux cleaned = 0.00542296 Jy ! Component: 7800 - total flux cleaned = 0.00546364 Jy ! Component: 7850 - total flux cleaned = 0.00549071 Jy ! Component: 7900 - total flux cleaned = 0.00545039 Jy ! Component: 7950 - total flux cleaned = 0.00546387 Jy ! Component: 8000 - total flux cleaned = 0.00541038 Jy ! Component: 8050 - total flux cleaned = 0.0054505 Jy ! Component: 8100 - total flux cleaned = 0.00543717 Jy ! Component: 8150 - total flux cleaned = 0.00545039 Jy ! Total flux subtracted in 8192 components = 0.00549004 Jy ! Clean residual min=-0.000727 max=0.000713 Jy/beam ! Clean residual mean=0.000002 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 1.22985 Jy keep ! Adding 720 model components to the UV plane model. ! The established model now contains 1313 components and 1.22985 Jy ![Exited script file: muppet] wmap "J1215-1731_L_2010_08_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.988 x 14.28 at 4.951 degrees (North through East) ! Clean map min=-0.0042342 max=0.77678 Jy/beam ! Writing clean map to FITS file: J1215-1731_L_2010_08_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.776783 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247119 device "J1215-1731_L_2010_08_23_pus\_map.eps/VPS" ! Attempting to open device: 'J1215-1731_L_2010_08_23_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0954394 0.0954394 0.190879 0.381758 0.763516 1.52703 3.05406 6.10812 12.2162 24.4325 48.865 97.73 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.776 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.988 x 14.28 at 4.951 degrees (North through East) ! Clean map min=-0.0042342 max=0.77678 Jy/beam quit ! Quitting program ! Log file J1215-1731_L_2010_08_23_pus_uvs.log closed on Sun Jan 10 01:05:49 2016