! Started logfile: J0650-1637_L_2011_08_18_pus_uvs.log on Tue Jan 12 22:17:03 2016 obs J0650-1637_L_2011_08_18_pus_uva.fits ! Reading UV FITS file: J0650-1637_L_2011_08_18_pus_uva.fits ! AN table 1: 550 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.901919 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 1.35446e+09 8e+06 1 8e+06 ! 02 2 1.36246e+09 8e+06 1 8e+06 ! 03 3 1.42646e+09 8e+06 1 8e+06 ! 04 4 1.43446e+09 8e+06 1 8e+06 ! ! Polarization(s): RR LL RL LR ! ! Read 795 lines of history. ! ! Reading 285728 visibilities. select I ! Selecting polarization: I, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.8 print "taper_size =",taper_size ! taper_size = 15 ![@muppet J0650-1637_L_2011_08_18_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.800x0.800 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 504 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 594 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 585 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.700362Jy sigma=0.008534 ! Fit after self-cal, rms=0.697695Jy sigma=0.008495 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.151 mas, bmaj=11.12 mas, bpa=0.6997 degrees ! Estimated noise=541.581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26527 Jy ! Component: 100 - total flux cleaned = 1.54641 Jy ! Total flux subtracted in 100 components = 1.54641 Jy ! Clean residual min=-0.026960 max=0.123359 Jy/beam ! Clean residual mean=-0.000114 rms=0.007064 Jy/beam ! Combined flux in latest and established models = 1.54641 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.54641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239528Jy sigma=0.003010 ! Fit after self-cal, rms=0.239549Jy sigma=0.003009 ! Inverting map ! Added new window around map position (-8, -6.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119827 Jy ! Component: 100 - total flux cleaned = 0.186494 Jy ! Total flux subtracted in 100 components = 0.186494 Jy ! Clean residual min=-0.017786 max=0.051048 Jy/beam ! Clean residual mean=-0.000078 rms=0.004164 Jy/beam ! Combined flux in latest and established models = 1.73291 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 1.73291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146296Jy sigma=0.001794 ! Fit after self-cal, rms=0.139833Jy sigma=0.001743 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476526 Jy ! Component: 100 - total flux cleaned = 0.0784232 Jy ! Total flux subtracted in 100 components = 0.0784232 Jy ! Clean residual min=-0.013629 max=0.034782 Jy/beam ! Clean residual mean=-0.000062 rms=0.003009 Jy/beam ! Combined flux in latest and established models = 1.81133 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 1.81133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113139Jy sigma=0.001374 ! Fit after self-cal, rms=0.111241Jy sigma=0.001362 ! Inverting map ! Added new window around map position (-18.4, -11.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356319 Jy ! Component: 100 - total flux cleaned = 0.0589755 Jy ! Total flux subtracted in 100 components = 0.0589755 Jy ! Clean residual min=-0.011397 max=0.022674 Jy/beam ! Clean residual mean=-0.000048 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 1.87031 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 1.87031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093117Jy sigma=0.001102 ! Fit after self-cal, rms=0.090784Jy sigma=0.001086 ! Inverting map ! Added new window around map position (6.4, 8.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231236 Jy ! Component: 100 - total flux cleaned = 0.0405905 Jy ! Total flux subtracted in 100 components = 0.0405905 Jy ! Clean residual min=-0.009522 max=0.015620 Jy/beam ! Clean residual mean=-0.000039 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 1.9109 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 76 components and 1.9109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081434Jy sigma=0.000953 ! Fit after self-cal, rms=0.080894Jy sigma=0.000950 ! Inverting map ! Added new window around map position (-31.2, -18.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171389 Jy ! Component: 100 - total flux cleaned = 0.030609 Jy ! Total flux subtracted in 100 components = 0.030609 Jy ! Clean residual min=-0.007913 max=0.012435 Jy/beam ! Clean residual mean=-0.000032 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 1.94151 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 98 components and 1.94151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074581Jy sigma=0.000857 ! Fit after self-cal, rms=0.074391Jy sigma=0.000856 ! Inverting map ! Added new window around map position (-46.4, -21.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133619 Jy ! Component: 100 - total flux cleaned = 0.0246293 Jy ! Total flux subtracted in 100 components = 0.0246293 Jy ! Clean residual min=-0.007242 max=0.009414 Jy/beam ! Clean residual mean=-0.000027 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 1.96614 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 115 components and 1.96614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069934Jy sigma=0.000791 ! Fit after self-cal, rms=0.069781Jy sigma=0.000790 ! Inverting map ! Added new window around map position (-13.6, -7.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110772 Jy ! Component: 100 - total flux cleaned = 0.0186935 Jy ! Total flux subtracted in 100 components = 0.0186935 Jy ! Clean residual min=-0.006920 max=0.008719 Jy/beam ! Clean residual mean=-0.000023 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 1.98483 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 130 components and 1.98483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066590Jy sigma=0.000743 ! Fit after self-cal, rms=0.066379Jy sigma=0.000743 ! Inverting map ! Added new window around map position (-39.2, -16.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815289 Jy ! Component: 100 - total flux cleaned = 0.0151184 Jy ! Total flux subtracted in 100 components = 0.0151184 Jy ! Clean residual min=-0.006267 max=0.007287 Jy/beam ! Clean residual mean=-0.000020 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 1.99995 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 155 components and 1.99995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063869Jy sigma=0.000705 ! Fit after self-cal, rms=0.063764Jy sigma=0.000705 ! Inverting map ! Added new window around map position (-24, -11.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737212 Jy ! Component: 100 - total flux cleaned = 0.013452 Jy ! Total flux subtracted in 100 components = 0.013452 Jy ! Clean residual min=-0.005601 max=0.006834 Jy/beam ! Clean residual mean=-0.000017 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 2.0134 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 166 components and 2.0134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061798Jy sigma=0.000676 ! Fit after self-cal, rms=0.061668Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.329 mas, bmaj=13.45 mas, bpa=2.019 degrees ! Estimated noise=239.193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126671 Jy ! Component: 100 - total flux cleaned = 0.0226336 Jy ! Component: 150 - total flux cleaned = 0.0307413 Jy ! Component: 200 - total flux cleaned = 0.0375083 Jy ! Total flux subtracted in 200 components = 0.0375083 Jy ! Clean residual min=-0.003925 max=0.007782 Jy/beam ! Clean residual mean=-0.000019 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 2.05091 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 226 components and 2.05091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057979Jy sigma=0.000617 ! Fit after self-cal, rms=0.057542Jy sigma=0.000614 ! Inverting map ! Added new window around map position (-53.6, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0082445 Jy ! Component: 100 - total flux cleaned = 0.0144222 Jy ! Component: 150 - total flux cleaned = 0.0188651 Jy ! Component: 200 - total flux cleaned = 0.0225593 Jy ! Total flux subtracted in 200 components = 0.0225593 Jy ! Clean residual min=-0.003485 max=0.006690 Jy/beam ! Clean residual mean=-0.000014 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 2.07347 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 279 components and 2.07347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055806Jy sigma=0.000588 ! Fit after self-cal, rms=0.055584Jy sigma=0.000587 ! Inverting map ! Added new window around map position (-98.4, -29.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618741 Jy ! Component: 100 - total flux cleaned = 0.00987888 Jy ! Component: 150 - total flux cleaned = 0.0131252 Jy ! Component: 200 - total flux cleaned = 0.0161789 Jy ! Total flux subtracted in 200 components = 0.0161789 Jy ! Clean residual min=-0.003139 max=0.004019 Jy/beam ! Clean residual mean=-0.000013 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 2.08965 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 319 components and 2.08965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054487Jy sigma=0.000571 ! Fit after self-cal, rms=0.054367Jy sigma=0.000571 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.00 ! LA 1.00 MK 1.00 NL 1.00 OV 1.00 ! SC 1.00 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.00 ! LA 1.00 MK 1.00 NL 1.00 OV 1.00 ! SC 1.00 ! ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.00 ! LA 1.00 MK 1.00 NL 1.00 OV 1.00 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.00 ! LA 1.00 MK 1.00 NL 1.00 OV 1.00 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.054367Jy sigma=0.000571 ! Fit after self-cal, rms=0.053988Jy sigma=0.000567 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.327 mas, bmaj=13.44 mas, bpa=2.009 degrees ! Estimated noise=239.178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118062 Jy ! Component: 100 - total flux cleaned = 0.00332756 Jy ! Component: 150 - total flux cleaned = 0.00519821 Jy ! Component: 200 - total flux cleaned = 0.00678574 Jy ! Total flux subtracted in 200 components = 0.00678574 Jy ! Clean residual min=-0.002590 max=0.003804 Jy/beam ! Clean residual mean=-0.000010 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 2.09643 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 348 components and 2.09643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053479Jy sigma=0.000561 ! Fit after self-cal, rms=0.053396Jy sigma=0.000561 ! Inverting map ! Added new window around map position (-135.2, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355748 Jy ! Component: 100 - total flux cleaned = 0.00528013 Jy ! Component: 150 - total flux cleaned = 0.00683203 Jy ! Component: 200 - total flux cleaned = 0.0083535 Jy ! Total flux subtracted in 200 components = 0.0083535 Jy ! Clean residual min=-0.002353 max=0.002998 Jy/beam ! Clean residual mean=-0.000008 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 2.10478 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 384 components and 2.10478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052983Jy sigma=0.000555 ! Fit after self-cal, rms=0.052936Jy sigma=0.000555 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052936Jy sigma=0.000555 ! Fit after self-cal, rms=0.052446Jy sigma=0.000552 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.327 mas, bmaj=13.44 mas, bpa=1.986 degrees ! Estimated noise=239.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165361 Jy ! Component: 100 - total flux cleaned = 0.00322747 Jy ! Component: 150 - total flux cleaned = 0.00467815 Jy ! Component: 200 - total flux cleaned = 0.00602919 Jy ! Total flux subtracted in 200 components = 0.00602919 Jy ! Clean residual min=-0.002166 max=0.002985 Jy/beam ! Clean residual mean=-0.000006 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 2.11081 Jy selfcal ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 417 components and 2.11081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052218Jy sigma=0.000549 ! Fit after self-cal, rms=0.052183Jy sigma=0.000549 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172064 Jy ! Component: 100 - total flux cleaned = 0.00267567 Jy ! Component: 150 - total flux cleaned = 0.00383176 Jy ! Component: 200 - total flux cleaned = 0.00491232 Jy ! Total flux subtracted in 200 components = 0.00491232 Jy ! Clean residual min=-0.002019 max=0.002703 Jy/beam ! Clean residual mean=-0.000005 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 2.11572 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 436 components and 2.11572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051965Jy sigma=0.000546 ! Fit after self-cal, rms=0.051935Jy sigma=0.000546 ! Inverting map ! Added new window around map position (-120.8, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276859 Jy ! Component: 100 - total flux cleaned = 0.00421728 Jy ! Component: 150 - total flux cleaned = 0.0053185 Jy ! Component: 200 - total flux cleaned = 0.00616787 Jy ! Total flux subtracted in 200 components = 0.00616787 Jy ! Clean residual min=-0.001998 max=0.002241 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 2.12189 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 464 components and 2.12189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051729Jy sigma=0.000544 ! Fit after self-cal, rms=0.051711Jy sigma=0.000543 ! Inverting map ! Added new window around map position (-8, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166378 Jy ! Component: 100 - total flux cleaned = 0.00233786 Jy ! Component: 150 - total flux cleaned = 0.0029085 Jy ! Component: 200 - total flux cleaned = 0.00356576 Jy ! Total flux subtracted in 200 components = 0.00356576 Jy ! Clean residual min=-0.001969 max=0.001928 Jy/beam ! Clean residual mean=-0.000004 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 2.12546 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 495 components and 2.12546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051548Jy sigma=0.000542 ! Fit after self-cal, rms=0.051537Jy sigma=0.000542 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051537Jy sigma=0.000542 ! Fit after self-cal, rms=0.051228Jy sigma=0.000539 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.327 mas, bmaj=13.43 mas, bpa=1.955 degrees ! Estimated noise=239.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172654 Jy ! Component: 100 - total flux cleaned = 0.00307271 Jy ! Component: 150 - total flux cleaned = 0.0038827 Jy ! Component: 200 - total flux cleaned = 0.00464031 Jy ! Total flux subtracted in 200 components = 0.00464031 Jy ! Clean residual min=-0.001852 max=0.001974 Jy/beam ! Clean residual mean=-0.000002 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 2.1301 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 529 components and 2.1301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051109Jy sigma=0.000538 ! Fit after self-cal, rms=0.051095Jy sigma=0.000538 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-61.6, 122.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140024 Jy ! Component: 100 - total flux cleaned = 0.00200517 Jy ! Component: 150 - total flux cleaned = 0.00247347 Jy ! Component: 200 - total flux cleaned = 0.00300468 Jy ! Total flux subtracted in 200 components = 0.00300468 Jy ! Clean residual min=-0.001738 max=0.001757 Jy/beam ! Clean residual mean=-0.000002 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 2.1331 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 550 components and 2.1331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050993Jy sigma=0.000536 ! Fit after self-cal, rms=0.050984Jy sigma=0.000536 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050984Jy sigma=0.000536 ! Fit after self-cal, rms=0.050973Jy sigma=0.000536 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.1 mas, bmaj=21.01 mas, bpa=4.494 degrees ! Estimated noise=273.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202619 Jy ! Component: 100 - total flux cleaned = 0.00367363 Jy ! Component: 150 - total flux cleaned = 0.00511626 Jy ! Component: 200 - total flux cleaned = 0.00619823 Jy ! Total flux subtracted in 200 components = 0.00619823 Jy ! Clean residual min=-0.001615 max=0.002369 Jy/beam ! Clean residual mean=-0.000005 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 2.1393 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 586 components and 2.1393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050916Jy sigma=0.000535 ! Fit after self-cal, rms=0.050903Jy sigma=0.000535 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83.2, -24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174733 Jy ! Component: 100 - total flux cleaned = 0.00245768 Jy ! Component: 150 - total flux cleaned = 0.00319313 Jy ! Component: 200 - total flux cleaned = 0.00386006 Jy ! Total flux subtracted in 200 components = 0.00386006 Jy ! Clean residual min=-0.001699 max=0.001758 Jy/beam ! Clean residual mean=-0.000005 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 2.14316 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 626 components and 2.14316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050826Jy sigma=0.000534 ! Fit after self-cal, rms=0.050815Jy sigma=0.000534 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.327 mas, bmaj=13.43 mas, bpa=1.948 degrees ! Estimated noise=239.218 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.327 x 13.43 at 1.948 degrees (North through East) ! Clean map min=-0.0049243 max=1.6301 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050815Jy sigma=0.000534 ! Fit after self-cal, rms=0.050451Jy sigma=0.000531 ! Inverting map and beam ! Estimated beam: bmin=5.326 mas, bmaj=13.43 mas, bpa=1.944 degrees ! Estimated noise=239.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128258 Jy ! Component: 100 - total flux cleaned = 0.00183828 Jy ! Component: 150 - total flux cleaned = 0.00209053 Jy ! Component: 200 - total flux cleaned = 0.00217054 Jy ! Total flux subtracted in 200 components = 0.00217054 Jy ! Clean residual min=-0.001656 max=0.001661 Jy/beam ! Clean residual mean=-0.000002 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 2.14533 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 655 components and 2.14533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050371Jy sigma=0.000530 ! Fit after self-cal, rms=0.050364Jy sigma=0.000530 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380021 Jy ! Component: 100 - total flux cleaned = 0.000606146 Jy ! Component: 150 - total flux cleaned = 0.000607075 Jy ! Component: 200 - total flux cleaned = 0.00074691 Jy ! Total flux subtracted in 200 components = 0.00074691 Jy ! Clean residual min=-0.001669 max=0.001616 Jy/beam ! Clean residual mean=-0.000002 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 2.14608 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 667 components and 2.14608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050309Jy sigma=0.000529 ! Fit after self-cal, rms=0.050304Jy sigma=0.000529 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050304Jy sigma=0.000529 ! Fit after self-cal, rms=0.050301Jy sigma=0.000529 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.15 mas, bmaj=11.11 mas, bpa=0.61 degrees ! Estimated noise=541.565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26457 Jy ! Component: 100 - total flux cleaned = 1.55432 Jy ! Component: 150 - total flux cleaned = 1.67585 Jy ! Component: 200 - total flux cleaned = 1.74714 Jy ! Total flux subtracted in 200 components = 1.74714 Jy ! Clean residual min=-0.012786 max=0.039383 Jy/beam ! Clean residual mean=-0.000070 rms=0.003670 Jy/beam ! Combined flux in latest and established models = 1.74714 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.74714 Jy ! Inverting map and beam ! Estimated beam: bmin=5.326 mas, bmaj=13.43 mas, bpa=1.939 degrees ! Estimated noise=239.287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805444 Jy ! Component: 100 - total flux cleaned = 0.130945 Jy ! Component: 150 - total flux cleaned = 0.165856 Jy ! Component: 200 - total flux cleaned = 0.193436 Jy ! Total flux subtracted in 200 components = 0.193436 Jy ! Clean residual min=-0.008996 max=0.016705 Jy/beam ! Clean residual mean=-0.000053 rms=0.002813 Jy/beam ! Combined flux in latest and established models = 1.94058 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 77 components and 1.94058 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227435 Jy ! Component: 100 - total flux cleaned = 0.0418048 Jy ! Component: 150 - total flux cleaned = 0.0579802 Jy ! Component: 200 - total flux cleaned = 0.0718089 Jy ! Total flux subtracted in 200 components = 0.0718089 Jy ! Clean residual min=-0.005482 max=0.008568 Jy/beam ! Clean residual mean=-0.000027 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 2.01238 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 137 components and 2.01238 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011919 Jy ! Component: 100 - total flux cleaned = 0.0223348 Jy ! Component: 150 - total flux cleaned = 0.0314943 Jy ! Component: 200 - total flux cleaned = 0.0395841 Jy ! Total flux subtracted in 200 components = 0.0395841 Jy ! Clean residual min=-0.004361 max=0.005104 Jy/beam ! Clean residual mean=-0.000017 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 2.05197 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 193 components and 2.05197 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721581 Jy ! Component: 100 - total flux cleaned = 0.0137057 Jy ! Component: 150 - total flux cleaned = 0.0189135 Jy ! Component: 200 - total flux cleaned = 0.0232741 Jy ! Total flux subtracted in 200 components = 0.0232741 Jy ! Clean residual min=-0.004314 max=0.003652 Jy/beam ! Clean residual mean=-0.000012 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 2.07524 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 239 components and 2.07524 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.1 mas, bmaj=21.01 mas, bpa=4.49 degrees ! Estimated noise=273.414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00806419 Jy ! Component: 100 - total flux cleaned = 0.014951 Jy ! Component: 150 - total flux cleaned = 0.0209855 Jy ! Component: 200 - total flux cleaned = 0.0263337 Jy ! Total flux subtracted in 200 components = 0.0263337 Jy ! Clean residual min=-0.003299 max=0.003566 Jy/beam ! Clean residual mean=-0.000015 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 2.10158 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476981 Jy ! Component: 100 - total flux cleaned = 0.00905463 Jy ! Component: 150 - total flux cleaned = 0.0129311 Jy ! Component: 200 - total flux cleaned = 0.0164614 Jy ! Total flux subtracted in 200 components = 0.0164614 Jy ! Clean residual min=-0.002808 max=0.002527 Jy/beam ! Clean residual mean=-0.000011 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 2.11804 Jy ! Adding 179 model components to the UV plane model. ! The established model now contains 391 components and 2.11803 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.326 mas, bmaj=13.43 mas, bpa=1.939 degrees ! Estimated noise=239.287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561037 Jy ! Component: 100 - total flux cleaned = 0.00167798 Jy ! Component: 150 - total flux cleaned = 0.00308487 Jy ! Component: 200 - total flux cleaned = 0.00467196 Jy ! Total flux subtracted in 200 components = 0.00467196 Jy ! Clean residual min=-0.002917 max=0.002439 Jy/beam ! Clean residual mean=-0.000005 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 2.12271 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 417 components and 2.12271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051361Jy sigma=0.000540 ! Fit after self-cal, rms=0.051277Jy sigma=0.000539 wmodel J0650-1637_L_2011_08_18_pus_map.mod ! Writing 417 model components to file: J0650-1637_L_2011_08_18_pus_map.mod wobs J0650-1637_L_2011_08_18_pus_uvs.fits ! Writing UV FITS file: J0650-1637_L_2011_08_18_pus_uvs.fits wwins J0650-1637_L_2011_08_18_pus_map.win ! wwins: Wrote 17 windows to J0650-1637_L_2011_08_18_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036018 Jy ! Component: 100 - total flux cleaned = -0.000440076 Jy ! Component: 150 - total flux cleaned = -0.000290934 Jy ! Component: 200 - total flux cleaned = -0.000148642 Jy ! Component: 250 - total flux cleaned = 2.01609e-05 Jy ! Component: 300 - total flux cleaned = 0.000346877 Jy ! Component: 350 - total flux cleaned = 0.000537872 Jy ! Component: 400 - total flux cleaned = 0.000847993 Jy ! Component: 450 - total flux cleaned = 0.00112058 Jy ! Component: 500 - total flux cleaned = 0.00132952 Jy ! Component: 550 - total flux cleaned = 0.0016223 Jy ! Component: 600 - total flux cleaned = 0.00193887 Jy ! Component: 650 - total flux cleaned = 0.0021374 Jy ! Component: 700 - total flux cleaned = 0.00238861 Jy ! Component: 750 - total flux cleaned = 0.00260865 Jy ! Component: 800 - total flux cleaned = 0.00285277 Jy ! Component: 850 - total flux cleaned = 0.00306715 Jy ! Component: 900 - total flux cleaned = 0.00335814 Jy ! Component: 950 - total flux cleaned = 0.00356701 Jy ! Component: 1000 - total flux cleaned = 0.00374779 Jy ! Component: 1050 - total flux cleaned = 0.00397781 Jy ! Component: 1100 - total flux cleaned = 0.00417955 Jy ! Component: 1150 - total flux cleaned = 0.0043544 Jy ! Component: 1200 - total flux cleaned = 0.00460159 Jy ! Component: 1250 - total flux cleaned = 0.00482093 Jy ! Component: 1300 - total flux cleaned = 0.00503797 Jy ! Component: 1350 - total flux cleaned = 0.00510931 Jy ! Component: 1400 - total flux cleaned = 0.00529904 Jy ! Component: 1450 - total flux cleaned = 0.0054627 Jy ! Component: 1500 - total flux cleaned = 0.00548609 Jy ! Component: 1550 - total flux cleaned = 0.00564743 Jy ! Component: 1600 - total flux cleaned = 0.00578432 Jy ! Component: 1650 - total flux cleaned = 0.00591998 Jy ! Component: 1700 - total flux cleaned = 0.0060546 Jy ! Component: 1750 - total flux cleaned = 0.00618755 Jy ! Component: 1800 - total flux cleaned = 0.0062972 Jy ! Component: 1850 - total flux cleaned = 0.00647155 Jy ! Component: 1900 - total flux cleaned = 0.00657943 Jy ! Component: 1950 - total flux cleaned = 0.00662254 Jy ! Component: 2000 - total flux cleaned = 0.00668652 Jy ! Component: 2050 - total flux cleaned = 0.00687587 Jy ! Component: 2100 - total flux cleaned = 0.00698033 Jy ! Component: 2150 - total flux cleaned = 0.00706307 Jy ! Component: 2200 - total flux cleaned = 0.00714528 Jy ! Component: 2250 - total flux cleaned = 0.00730826 Jy ! Component: 2300 - total flux cleaned = 0.0073285 Jy ! Component: 2350 - total flux cleaned = 0.00750908 Jy ! Component: 2400 - total flux cleaned = 0.0075886 Jy ! Component: 2450 - total flux cleaned = 0.00770694 Jy ! Component: 2500 - total flux cleaned = 0.00774598 Jy ! Component: 2550 - total flux cleaned = 0.0078821 Jy ! Component: 2600 - total flux cleaned = 0.00797845 Jy ! Component: 2650 - total flux cleaned = 0.00805505 Jy ! Component: 2700 - total flux cleaned = 0.00809347 Jy ! Component: 2750 - total flux cleaned = 0.0081878 Jy ! Component: 2800 - total flux cleaned = 0.00830001 Jy ! Component: 2850 - total flux cleaned = 0.00831849 Jy ! Component: 2900 - total flux cleaned = 0.00848466 Jy ! Component: 2950 - total flux cleaned = 0.0085216 Jy ! Component: 3000 - total flux cleaned = 0.00861258 Jy ! Component: 3050 - total flux cleaned = 0.00877553 Jy ! Component: 3100 - total flux cleaned = 0.00888329 Jy ! Component: 3150 - total flux cleaned = 0.00895473 Jy ! Component: 3200 - total flux cleaned = 0.00906134 Jy ! Component: 3250 - total flux cleaned = 0.00906144 Jy ! Component: 3300 - total flux cleaned = 0.00914918 Jy ! Component: 3350 - total flux cleaned = 0.00939346 Jy ! Component: 3400 - total flux cleaned = 0.0094451 Jy ! Component: 3450 - total flux cleaned = 0.00946222 Jy ! Component: 3500 - total flux cleaned = 0.00953051 Jy ! Component: 3550 - total flux cleaned = 0.00959881 Jy ! Component: 3600 - total flux cleaned = 0.00973428 Jy ! Component: 3650 - total flux cleaned = 0.0098183 Jy ! Component: 3700 - total flux cleaned = 0.00981827 Jy ! Component: 3750 - total flux cleaned = 0.00993457 Jy ! Component: 3800 - total flux cleaned = 0.00995128 Jy ! Component: 3850 - total flux cleaned = 0.0100006 Jy ! Component: 3900 - total flux cleaned = 0.0100661 Jy ! Component: 3950 - total flux cleaned = 0.0101961 Jy ! Component: 4000 - total flux cleaned = 0.0102609 Jy ! Component: 4050 - total flux cleaned = 0.0102771 Jy ! Total flux subtracted in 4096 components = 0.0103571 Jy ! Clean residual min=-0.000905 max=0.000905 Jy/beam ! Clean residual mean=-0.000005 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 2.13306 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 696 components and 2.13306 Jy ![Exited script file: muppet] wmap "J0650-1637_L_2011_08_18_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.326 x 13.43 at 1.939 degrees (North through East) ! Clean map min=-0.0038804 max=1.6319 Jy/beam ! Writing clean map to FITS file: J0650-1637_L_2011_08_18_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.63193 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000306908 device "J0650-1637_L_2011_08_18_pus\_map.eps/VPS" ! Attempting to open device: 'J0650-1637_L_2011_08_18_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0564192 0.0564192 0.112838 0.225677 0.451354 0.902708 1.80542 3.61083 7.22166 14.4433 28.8867 57.7733 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.631 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.326 x 13.43 at 1.939 degrees (North through East) ! Clean map min=-0.0038804 max=1.6319 Jy/beam quit ! Quitting program ! Log file J0650-1637_L_2011_08_18_pus_uvs.log closed on Tue Jan 12 22:17:35 2016