! Started logfile: J0532+0732_L_2010_11_05_pus_uvs.log on Tue Jan 12 13:24:01 2016
obs J0532+0732_L_2010_11_05_pus_uva.fits
! Reading UV FITS file: J0532+0732_L_2010_11_05_pus_uva.fits
! AN table 1: 434 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.602509 visibilities/baseline/integration-bin.
! Found source: J0532+0732
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  1.35446e+09        8e+06          1        8e+06
!  02        2  1.36246e+09        8e+06          1        8e+06
!  03        3  1.42646e+09        8e+06          1        8e+06
!  04        4  1.43446e+09        8e+06          1        8e+06
! 
! Polarization(s): RR LL RL LR
! 
! Read 743 lines of history.
! 
! Reading 188272 visibilities.
select I
! Selecting polarization: I,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.8 
print "taper_size =",taper_size
! taper_size = 15 
![@muppet J0532+0732_L_2010_11_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.800x0.800 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 923 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 923 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 923 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 923 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=8.354169Jy  sigma=0.009368
! Fit after  self-cal, rms=8.353148Jy  sigma=0.009358
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.636 mas, bmaj=13.91 mas, bpa=5.206 degrees
! Estimated noise=3933.8 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15414 Jy
! Component: 100  -  total flux cleaned = 0.220875 Jy
! Total flux subtracted in 100 components = 0.220875 Jy
! Clean residual min=-0.031961 max=0.032121 Jy/beam
! Clean residual mean=0.000221 rms=0.010661 Jy/beam
! Combined flux in latest and established models = 0.220875 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.220875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=8.320216Jy  sigma=0.003147
! Fit after  self-cal, rms=8.320306Jy  sigma=0.003147
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.371 mas, bmaj=22.06 mas, bpa=3.562 degrees
! Estimated noise=787.841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.028245 Jy
! Component: 100  -  total flux cleaned = 0.00127774 Jy
! Component: 150  -  total flux cleaned = -0.0131513 Jy
! Component: 200  -  total flux cleaned = -0.0150674 Jy
! Total flux subtracted in 200 components = -0.0150674 Jy
! Clean residual min=-0.009503 max=0.009451 Jy/beam
! Clean residual mean=0.000034 rms=0.004592 Jy/beam
! Combined flux in latest and established models = 0.205807 Jy
! Performing phase self-cal
! Adding 114 model components to the UV plane model.
! The established model now contains 147 components and 0.205807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=8.319665Jy  sigma=0.002935
! Fit after  self-cal, rms=8.319490Jy  sigma=0.002934
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        1.00*    KP        0.90     
!   LA        0.98     MK        1.11     NL        1.03     OV        0.98     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.99     HN        1.00*    KP        0.92     
!   LA        0.99     MK        1.11     NL        1.02     OV        1.02     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.01     HN        1.00*    KP        0.90     
!   LA        1.00     MK        1.08     NL        0.99     OV        0.96     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        1.01     HN        1.00*    KP        0.91     
!   LA        1.00     MK        0.92     NL        0.99     OV        0.94     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=8.319490Jy  sigma=0.002934
! Fit after  self-cal, rms=8.941410Jy  sigma=0.002932
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.524 mas, bmaj=22.54 mas, bpa=4.025 degrees
! Estimated noise=774.941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00304497 Jy
! Component: 100  -  total flux cleaned = 0.00389072 Jy
! Component: 150  -  total flux cleaned = 0.00614467 Jy
! Component: 200  -  total flux cleaned = 0.00933894 Jy
! Total flux subtracted in 200 components = 0.00933894 Jy
! Clean residual min=-0.005702 max=0.005736 Jy/beam
! Clean residual mean=0.000039 rms=0.002277 Jy/beam
! Combined flux in latest and established models = 0.215146 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 205 components and 0.215146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=8.941261Jy  sigma=0.002928
! Fit after  self-cal, rms=8.941285Jy  sigma=0.002928
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=8.941285Jy  sigma=0.002928
! Fit after  self-cal, rms=8.916679Jy  sigma=0.002927
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.355 mas, bmaj=22.19 mas, bpa=3.619 degrees
! Estimated noise=768.952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00665035 Jy
! Component: 100  -  total flux cleaned = 0.0117856 Jy
! Component: 150  -  total flux cleaned = 0.0153559 Jy
! Component: 200  -  total flux cleaned = 0.0178097 Jy
! Total flux subtracted in 200 components = 0.0178097 Jy
! Clean residual min=-0.003980 max=0.004013 Jy/beam
! Clean residual mean=0.000018 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 0.232956 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 244 components and 0.232956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=8.916507Jy  sigma=0.002926
! Fit after  self-cal, rms=8.916464Jy  sigma=0.002926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00516781 Jy
! Component: 100  -  total flux cleaned = 0.00754975 Jy
! Component: 150  -  total flux cleaned = 0.00962294 Jy
! Component: 200  -  total flux cleaned = 0.0109682 Jy
! Total flux subtracted in 200 components = 0.0109682 Jy
! Clean residual min=-0.003676 max=0.003658 Jy/beam
! Clean residual mean=0.000013 rms=0.001463 Jy/beam
! Combined flux in latest and established models = 0.243924 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 267 components and 0.243924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=8.916330Jy  sigma=0.002925
! Fit after  self-cal, rms=8.916280Jy  sigma=0.002925
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=8.916280Jy  sigma=0.002925
! Fit after  self-cal, rms=9.423834Jy  sigma=0.002925
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.164 mas, bmaj=21.87 mas, bpa=3.947 degrees
! Estimated noise=757.209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000869285 Jy
! Component: 100  -  total flux cleaned = -0.000464937 Jy
! Component: 150  -  total flux cleaned = -0.0008953 Jy
! Component: 200  -  total flux cleaned = -0.00151705 Jy
! Total flux subtracted in 200 components = -0.00151705 Jy
! Clean residual min=-0.003401 max=0.003389 Jy/beam
! Clean residual mean=0.000015 rms=0.001351 Jy/beam
! Combined flux in latest and established models = 0.242407 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 300 components and 0.242407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=9.423717Jy  sigma=0.002925
! Fit after  self-cal, rms=9.423577Jy  sigma=0.002924
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000937547 Jy
! Component: 100  -  total flux cleaned = 0.000525022 Jy
! Component: 150  -  total flux cleaned = 0.000728531 Jy
! Component: 200  -  total flux cleaned = 0.00132814 Jy
! Total flux subtracted in 200 components = 0.00132814 Jy
! Clean residual min=-0.003332 max=0.003321 Jy/beam
! Clean residual mean=0.000019 rms=0.001331 Jy/beam
! Combined flux in latest and established models = 0.243735 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 320 components and 0.243735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=9.423450Jy  sigma=0.002924
! Fit after  self-cal, rms=9.423421Jy  sigma=0.002924
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=9.423421Jy  sigma=0.002924
! Fit after  self-cal, rms=9.516015Jy  sigma=0.002924
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=21.29 mas, bmaj=35.12 mas, bpa=8.794 degrees
! Estimated noise=586.402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152254 Jy
! Component: 100  -  total flux cleaned = 0.00193141 Jy
! Component: 150  -  total flux cleaned = 0.00213146 Jy
! Component: 200  -  total flux cleaned = 0.00232159 Jy
! Total flux subtracted in 200 components = 0.00232159 Jy
! Clean residual min=-0.003167 max=0.003189 Jy/beam
! Clean residual mean=0.000009 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 0.246057 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 369 components and 0.246057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=9.515920Jy  sigma=0.002923
! Fit after  self-cal, rms=9.515828Jy  sigma=0.002923
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000827486 Jy
! Component: 100  -  total flux cleaned = 0.000643736 Jy
! Component: 150  -  total flux cleaned = 0.00120234 Jy
! Component: 200  -  total flux cleaned = 0.00119746 Jy
! Total flux subtracted in 200 components = 0.00119746 Jy
! Clean residual min=-0.003035 max=0.003040 Jy/beam
! Clean residual mean=0.000018 rms=0.001380 Jy/beam
! Combined flux in latest and established models = 0.247254 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 407 components and 0.247254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=9.515754Jy  sigma=0.002923
! Fit after  self-cal, rms=9.515692Jy  sigma=0.002923
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.105 mas, bmaj=21.81 mas, bpa=4.364 degrees
! Estimated noise=747.994 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.105 x 21.81 at 4.364 degrees (North through East)
! Clean map  min=-0.021845  max=0.18596 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.492 mas, bmaj=13.84 mas, bpa=5.974 degrees
! Estimated noise=3580.99 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147927 Jy
! Component: 100  -  total flux cleaned = 0.212741 Jy
! Component: 150  -  total flux cleaned = 0.207345 Jy
! Component: 200  -  total flux cleaned = 0.195765 Jy
! Total flux subtracted in 200 components = 0.195765 Jy
! Clean residual min=-0.016776 max=0.016644 Jy/beam
! Clean residual mean=0.000055 rms=0.005025 Jy/beam
! Combined flux in latest and established models = 0.195765 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.195765 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.105 mas, bmaj=21.81 mas, bpa=4.364 degrees
! Estimated noise=747.994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00353005 Jy
! Component: 100  -  total flux cleaned = -0.0116797 Jy
! Component: 150  -  total flux cleaned = -0.0110274 Jy
! Component: 200  -  total flux cleaned = -0.00974134 Jy
! Total flux subtracted in 200 components = -0.00974134 Jy
! Clean residual min=-0.006584 max=0.006560 Jy/beam
! Clean residual mean=-0.000052 rms=0.002691 Jy/beam
! Combined flux in latest and established models = 0.186024 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 113 components and 0.186024 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=21.29 mas, bmaj=35.12 mas, bpa=8.794 degrees
! Estimated noise=586.402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00376625 Jy
! Component: 100  -  total flux cleaned = -0.00271214 Jy
! Component: 150  -  total flux cleaned = -0.0010937 Jy
! Component: 200  -  total flux cleaned = 0.000421987 Jy
! Total flux subtracted in 200 components = 0.000421987 Jy
! Clean residual min=-0.004818 max=0.004816 Jy/beam
! Clean residual mean=-0.000037 rms=0.002071 Jy/beam
! Combined flux in latest and established models = 0.186446 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167802 Jy
! Component: 100  -  total flux cleaned = 0.00380527 Jy
! Component: 150  -  total flux cleaned = 0.00560246 Jy
! Component: 200  -  total flux cleaned = 0.0076 Jy
! Total flux subtracted in 200 components = 0.0076 Jy
! Clean residual min=-0.004112 max=0.004122 Jy/beam
! Clean residual mean=0.000005 rms=0.001821 Jy/beam
! Combined flux in latest and established models = 0.194046 Jy
! Adding 139 model components to the UV plane model.
! The established model now contains 252 components and 0.194046 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.105 mas, bmaj=21.81 mas, bpa=4.364 degrees
! Estimated noise=747.994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218839 Jy
! Component: 100  -  total flux cleaned = 0.00422386 Jy
! Component: 150  -  total flux cleaned = 0.00642759 Jy
! Component: 200  -  total flux cleaned = 0.00785122 Jy
! Total flux subtracted in 200 components = 0.00785122 Jy
! Clean residual min=-0.003898 max=0.003920 Jy/beam
! Clean residual mean=-0.000014 rms=0.001506 Jy/beam
! Combined flux in latest and established models = 0.201897 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 282 components and 0.201897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=9.516046Jy  sigma=0.002925
! Fit after  self-cal, rms=9.516078Jy  sigma=0.002924
wmodel J0532+0732_L_2010_11_05_pus_map.mod
! Writing 282 model components to file: J0532+0732_L_2010_11_05_pus_map.mod
wobs J0532+0732_L_2010_11_05_pus_uvs.fits
! Writing UV FITS file: J0532+0732_L_2010_11_05_pus_uvs.fits
wwins J0532+0732_L_2010_11_05_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0532+0732_L_2010_11_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.105 x 21.81 at 4.364 degrees (North through East)
! Clean map  min=-0.025484  max=0.18121 Jy/beam
! Writing clean map to FITS file: J0532+0732_L_2010_11_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.181215 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00142825 
device "J0532+0732_L_2010_11_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0532+0732_L_2010_11_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.36446 2.36446 4.72891 9.45783 18.9157 37.8313 75.6626
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0042 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.181 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.105 x 21.81 at 4.364 degrees (North through East)
! Clean map  min=-0.025484  max=0.18121 Jy/beam
quit
! Quitting program
! Log file J0532+0732_L_2010_11_05_pus_uvs.log closed on Tue Jan 12 13:24:12 2016