! Started logfile: J0433+0521_L_2010_05_21_pus_uvs.log on Wed Jan  6 22:13:46 2016
obs J0433+0521_L_2010_05_21_pus_uva.fits
! Reading UV FITS file: J0433+0521_L_2010_05_21_pus_uva.fits
! AN table 1: 535 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.735867 visibilities/baseline/integration-bin.
! Found source: J0433+0521
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  1.35446e+09        8e+06          1        8e+06
!  02        2  1.36246e+09        8e+06          1        8e+06
!  03        3  1.42646e+09        8e+06          1        8e+06
!  04        4  1.43446e+09        8e+06          1        8e+06
! 
! Polarization(s): RR LL RL LR
! 
! Read 744 lines of history.
! 
! Reading 283456 visibilities.
select I
! Selecting polarization: I,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.8 
print "taper_size =",taper_size
! taper_size = 15 
![@muppet J0433+0521_L_2010_05_21_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.800x0.800 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 728 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 728 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 728 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 728 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.237164Jy  sigma=0.013900
! Fit after  self-cal, rms=1.220467Jy  sigma=0.013739
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.009 mas, bmaj=10.41 mas, bpa=7.251 degrees
! Estimated noise=558.329 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.24693 Jy
! Component: 100  -  total flux cleaned = 1.71526 Jy
! Total flux subtracted in 100 components = 1.71526 Jy
! Clean residual min=-0.103901 max=0.417673 Jy/beam
! Clean residual mean=-0.001210 rms=0.024153 Jy/beam
! Combined flux in latest and established models = 1.71526 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.71526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.818973Jy  sigma=0.008963
! Fit after  self-cal, rms=0.814476Jy  sigma=0.008929
! Inverting map 
! Added new window around map position (-12, -5.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.362263 Jy
! Component: 100  -  total flux cleaned = 0.557918 Jy
! Total flux subtracted in 100 components = 0.557918 Jy
! Clean residual min=-0.070875 max=0.169253 Jy/beam
! Clean residual mean=-0.000787 rms=0.015846 Jy/beam
! Combined flux in latest and established models = 2.27318 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 2.27318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.574723Jy  sigma=0.006040
! Fit after  self-cal, rms=0.548552Jy  sigma=0.005761
! Inverting map 
! Added new window around map position (-78.4, -13.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187561 Jy
! Component: 100  -  total flux cleaned = 0.312324 Jy
! Total flux subtracted in 100 components = 0.312324 Jy
! Clean residual min=-0.049556 max=0.102563 Jy/beam
! Clean residual mean=-0.000615 rms=0.011081 Jy/beam
! Combined flux in latest and established models = 2.5855 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 2.5855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.442509Jy  sigma=0.004429
! Fit after  self-cal, rms=0.435832Jy  sigma=0.004359
! Inverting map 
! Added new window around map position (-88.8, -13.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119491 Jy
! Component: 100  -  total flux cleaned = 0.207223 Jy
! Total flux subtracted in 100 components = 0.207223 Jy
! Clean residual min=-0.038826 max=0.072279 Jy/beam
! Clean residual mean=-0.000511 rms=0.008567 Jy/beam
! Combined flux in latest and established models = 2.79273 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 60 components and 2.79273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.376005Jy  sigma=0.003571
! Fit after  self-cal, rms=0.372507Jy  sigma=0.003534
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0777515 Jy
! Component: 100  -  total flux cleaned = 0.139222 Jy
! Total flux subtracted in 100 components = 0.139222 Jy
! Clean residual min=-0.030948 max=0.055326 Jy/beam
! Clean residual mean=-0.000437 rms=0.007200 Jy/beam
! Combined flux in latest and established models = 2.93195 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 77 components and 2.93195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.338668Jy  sigma=0.003071
! Fit after  self-cal, rms=0.337285Jy  sigma=0.003057
! Inverting map 
! Added new window around map position (-20.8, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0599748 Jy
! Component: 100  -  total flux cleaned = 0.106812 Jy
! Total flux subtracted in 100 components = 0.106812 Jy
! Clean residual min=-0.026651 max=0.045972 Jy/beam
! Clean residual mean=-0.000375 rms=0.006301 Jy/beam
! Combined flux in latest and established models = 3.03876 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 105 components and 3.03876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.315425Jy  sigma=0.002740
! Fit after  self-cal, rms=0.314398Jy  sigma=0.002729
! Inverting map 
! Added new window around map position (-96, -16).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0471647 Jy
! Component: 100  -  total flux cleaned = 0.0847849 Jy
! Total flux subtracted in 100 components = 0.0847849 Jy
! Clean residual min=-0.024715 max=0.040172 Jy/beam
! Clean residual mean=-0.000332 rms=0.005675 Jy/beam
! Combined flux in latest and established models = 3.12355 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 134 components and 3.12355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.299122Jy  sigma=0.002507
! Fit after  self-cal, rms=0.298444Jy  sigma=0.002500
! Inverting map 
! Added new window around map position (8, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0387399 Jy
! Component: 100  -  total flux cleaned = 0.0706901 Jy
! Total flux subtracted in 100 components = 0.0706901 Jy
! Clean residual min=-0.023038 max=0.026980 Jy/beam
! Clean residual mean=-0.000292 rms=0.005218 Jy/beam
! Combined flux in latest and established models = 3.19424 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 160 components and 3.19424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.287482Jy  sigma=0.002338
! Fit after  self-cal, rms=0.287370Jy  sigma=0.002337
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.423 mas, bmaj=12.85 mas, bpa=6.927 degrees
! Estimated noise=247.359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0602168 Jy
! Component: 100  -  total flux cleaned = 0.109099 Jy
! Component: 150  -  total flux cleaned = 0.150462 Jy
! Component: 200  -  total flux cleaned = 0.185821 Jy
! Total flux subtracted in 200 components = 0.185821 Jy
! Clean residual min=-0.024734 max=0.030402 Jy/beam
! Clean residual mean=-0.000629 rms=0.006360 Jy/beam
! Combined flux in latest and established models = 3.38006 Jy
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 230 components and 3.38006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.266172Jy  sigma=0.002006
! Fit after  self-cal, rms=0.265273Jy  sigma=0.001995
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.00*    KP        1.00     
!   LA        0.94     MK        1.14     NL        1.07     OV        0.96     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        1.00*    KP        1.02     
!   LA        0.96     MK        1.06     NL        1.05     OV        0.99     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00*    KP        0.90     
!   LA        0.93     MK        0.90     NL        1.01     OV        1.03     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.00*    KP        0.96     
!   LA        0.97     MK        0.94     NL        1.01     OV        1.04     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.265273Jy  sigma=0.001995
! Fit after  self-cal, rms=0.226828Jy  sigma=0.001469
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.45 mas, bmaj=12.97 mas, bpa=7.164 degrees
! Estimated noise=246.519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295024 Jy
! Component: 100  -  total flux cleaned = 0.0495214 Jy
! Component: 150  -  total flux cleaned = 0.064745 Jy
! Component: 200  -  total flux cleaned = 0.0758487 Jy
! Total flux subtracted in 200 components = 0.0758487 Jy
! Clean residual min=-0.011920 max=0.021981 Jy/beam
! Clean residual mean=-0.000334 rms=0.003578 Jy/beam
! Combined flux in latest and established models = 3.45591 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 285 components and 3.45591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222295Jy  sigma=0.001369
! Fit after  self-cal, rms=0.221721Jy  sigma=0.001360
! Inverting map 
! Added new window around map position (-29.6, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209249 Jy
! Component: 100  -  total flux cleaned = 0.0329427 Jy
! Component: 150  -  total flux cleaned = 0.0385205 Jy
! Component: 200  -  total flux cleaned = 0.0432666 Jy
! Total flux subtracted in 200 components = 0.0432666 Jy
! Clean residual min=-0.010450 max=0.015055 Jy/beam
! Clean residual mean=-0.000286 rms=0.003085 Jy/beam
! Combined flux in latest and established models = 3.49917 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 311 components and 3.49917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219474Jy  sigma=0.001307
! Fit after  self-cal, rms=0.219203Jy  sigma=0.001303
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219203Jy  sigma=0.001303
! Fit after  self-cal, rms=0.203022Jy  sigma=0.001226
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.471 mas, bmaj=12.96 mas, bpa=7.293 degrees
! Estimated noise=247.025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768548 Jy
! Component: 100  -  total flux cleaned = 0.0129018 Jy
! Component: 150  -  total flux cleaned = 0.0162106 Jy
! Component: 200  -  total flux cleaned = 0.0180589 Jy
! Total flux subtracted in 200 components = 0.0180589 Jy
! Clean residual min=-0.010249 max=0.012974 Jy/beam
! Clean residual mean=-0.000135 rms=0.002552 Jy/beam
! Combined flux in latest and established models = 3.51723 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 336 components and 3.51723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202253Jy  sigma=0.001213
! Fit after  self-cal, rms=0.202159Jy  sigma=0.001212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-52, -8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118457 Jy
! Component: 100  -  total flux cleaned = 0.0172321 Jy
! Component: 150  -  total flux cleaned = 0.0208216 Jy
! Component: 200  -  total flux cleaned = 0.0227721 Jy
! Total flux subtracted in 200 components = 0.0227721 Jy
! Clean residual min=-0.008878 max=0.011330 Jy/beam
! Clean residual mean=-0.000109 rms=0.002331 Jy/beam
! Combined flux in latest and established models = 3.54 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 374 components and 3.54 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201285Jy  sigma=0.001195
! Fit after  self-cal, rms=0.201226Jy  sigma=0.001194
! Inverting map 
! Added new window around map position (-108, -12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112865 Jy
! Component: 100  -  total flux cleaned = 0.0175238 Jy
! Component: 150  -  total flux cleaned = 0.0213261 Jy
! Component: 200  -  total flux cleaned = 0.0241886 Jy
! Total flux subtracted in 200 components = 0.0241886 Jy
! Clean residual min=-0.008739 max=0.009313 Jy/beam
! Clean residual mean=-0.000070 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 3.56419 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 413 components and 3.56419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200348Jy  sigma=0.001179
! Fit after  self-cal, rms=0.200252Jy  sigma=0.001177
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200252Jy  sigma=0.001177
! Fit after  self-cal, rms=0.102625Jy  sigma=0.000910
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.458 mas, bmaj=12.94 mas, bpa=7.096 degrees
! Estimated noise=246.264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00767983 Jy
! Component: 100  -  total flux cleaned = 0.0127457 Jy
! Component: 150  -  total flux cleaned = 0.0156983 Jy
! Component: 200  -  total flux cleaned = 0.0180267 Jy
! Total flux subtracted in 200 components = 0.0180267 Jy
! Clean residual min=-0.007141 max=0.006534 Jy/beam
! Clean residual mean=-0.000087 rms=0.001424 Jy/beam
! Combined flux in latest and established models = 3.58222 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 440 components and 3.58222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101776Jy  sigma=0.000898
! Fit after  self-cal, rms=0.101659Jy  sigma=0.000897
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220203 Jy
! Component: 100  -  total flux cleaned = 0.00454522 Jy
! Component: 150  -  total flux cleaned = 0.00609303 Jy
! Component: 200  -  total flux cleaned = 0.00711691 Jy
! Total flux subtracted in 200 components = 0.00711691 Jy
! Clean residual min=-0.006644 max=0.006193 Jy/beam
! Clean residual mean=-0.000078 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 3.58933 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 455 components and 3.58933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101159Jy  sigma=0.000892
! Fit after  self-cal, rms=0.101068Jy  sigma=0.000891
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101068Jy  sigma=0.000891
! Fit after  self-cal, rms=0.100713Jy  sigma=0.000890
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.41 mas, bmaj=18.12 mas, bpa=12.81 degrees
! Estimated noise=269.907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00618288 Jy
! Component: 100  -  total flux cleaned = 0.0103286 Jy
! Component: 150  -  total flux cleaned = 0.0132947 Jy
! Component: 200  -  total flux cleaned = 0.0152073 Jy
! Total flux subtracted in 200 components = 0.0152073 Jy
! Clean residual min=-0.005427 max=0.006066 Jy/beam
! Clean residual mean=-0.000124 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 3.60454 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 513 components and 3.60454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100436Jy  sigma=0.000885
! Fit after  self-cal, rms=0.100374Jy  sigma=0.000884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166955 Jy
! Component: 100  -  total flux cleaned = 0.00307904 Jy
! Component: 150  -  total flux cleaned = 0.00413823 Jy
! Component: 200  -  total flux cleaned = 0.00512174 Jy
! Total flux subtracted in 200 components = 0.00512174 Jy
! Clean residual min=-0.005361 max=0.005980 Jy/beam
! Clean residual mean=-0.000113 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 3.60966 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 546 components and 3.60966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100198Jy  sigma=0.000881
! Fit after  self-cal, rms=0.100153Jy  sigma=0.000881
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.457 mas, bmaj=12.94 mas, bpa=7.092 degrees
! Estimated noise=246.255 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.457 x 12.94 at 7.092 degrees (North through East)
! Clean map  min=-0.0057967  max=1.5564 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100153Jy  sigma=0.000881
! Fit after  self-cal, rms=0.079415Jy  sigma=0.000657
! Inverting map and beam 
! Estimated beam: bmin=6.456 mas, bmaj=12.95 mas, bpa=7.099 degrees
! Estimated noise=246.235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145297 Jy
! Component: 100  -  total flux cleaned = 0.00204781 Jy
! Component: 150  -  total flux cleaned = 0.00246025 Jy
! Component: 200  -  total flux cleaned = 0.00284621 Jy
! Total flux subtracted in 200 components = 0.00284621 Jy
! Clean residual min=-0.005444 max=0.005214 Jy/beam
! Clean residual mean=-0.000086 rms=0.001210 Jy/beam
! Combined flux in latest and established models = 3.61251 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 562 components and 3.61251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078856Jy  sigma=0.000651
! Fit after  self-cal, rms=0.078770Jy  sigma=0.000651
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.01223e-05 Jy
! Component: 100  -  total flux cleaned = 0.00041989 Jy
! Component: 150  -  total flux cleaned = 0.000895233 Jy
! Component: 200  -  total flux cleaned = 0.00135084 Jy
! Total flux subtracted in 200 components = 0.00135084 Jy
! Clean residual min=-0.005352 max=0.005137 Jy/beam
! Clean residual mean=-0.000084 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 3.61386 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 565 components and 3.61386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078343Jy  sigma=0.000647
! Fit after  self-cal, rms=0.078264Jy  sigma=0.000647
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078264Jy  sigma=0.000647
! Fit after  self-cal, rms=0.078094Jy  sigma=0.000646
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.01 mas, bmaj=10.42 mas, bpa=7.386 degrees
! Estimated noise=559.662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.25004 Jy
! Component: 100  -  total flux cleaned = 1.81192 Jy
! Component: 150  -  total flux cleaned = 2.14458 Jy
! Component: 200  -  total flux cleaned = 2.36719 Jy
! Total flux subtracted in 200 components = 2.36719 Jy
! Clean residual min=-0.042013 max=0.125822 Jy/beam
! Clean residual mean=-0.000728 rms=0.012738 Jy/beam
! Combined flux in latest and established models = 2.36719 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 2.36719 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.455 mas, bmaj=12.95 mas, bpa=7.104 degrees
! Estimated noise=246.195 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.251361 Jy
! Component: 100  -  total flux cleaned = 0.429918 Jy
! Component: 150  -  total flux cleaned = 0.562747 Jy
! Component: 200  -  total flux cleaned = 0.66462 Jy
! Total flux subtracted in 200 components = 0.66462 Jy
! Clean residual min=-0.027290 max=0.059591 Jy/beam
! Clean residual mean=-0.000834 rms=0.009677 Jy/beam
! Combined flux in latest and established models = 3.03181 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 77 components and 3.03181 Jy
! Inverting map 
! Added new window around map position (-84, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0796637 Jy
! Component: 100  -  total flux cleaned = 0.143818 Jy
! Component: 150  -  total flux cleaned = 0.196617 Jy
! Component: 200  -  total flux cleaned = 0.240648 Jy
! Total flux subtracted in 200 components = 0.240648 Jy
! Clean residual min=-0.016507 max=0.027319 Jy/beam
! Clean residual mean=-0.000520 rms=0.005294 Jy/beam
! Combined flux in latest and established models = 3.27246 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 158 components and 3.27246 Jy
! Inverting map 
! Added new window around map position (-6.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.037236 Jy
! Component: 100  -  total flux cleaned = 0.068888 Jy
! Component: 150  -  total flux cleaned = 0.0961676 Jy
! Component: 200  -  total flux cleaned = 0.120055 Jy
! Total flux subtracted in 200 components = 0.120055 Jy
! Clean residual min=-0.011740 max=0.015058 Jy/beam
! Clean residual mean=-0.000366 rms=0.003421 Jy/beam
! Combined flux in latest and established models = 3.39251 Jy
! Adding 96 model components to the UV plane model.
! The established model now contains 243 components and 3.39251 Jy
! Inverting map 
! Added new window around map position (-71.2, -10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210761 Jy
! Component: 100  -  total flux cleaned = 0.0398182 Jy
! Component: 150  -  total flux cleaned = 0.0565963 Jy
! Component: 200  -  total flux cleaned = 0.0716919 Jy
! Total flux subtracted in 200 components = 0.0716919 Jy
! Clean residual min=-0.009068 max=0.009754 Jy/beam
! Clean residual mean=-0.000275 rms=0.002454 Jy/beam
! Combined flux in latest and established models = 3.4642 Jy
! Adding 99 model components to the UV plane model.
! The established model now contains 318 components and 3.4642 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.41 mas, bmaj=18.12 mas, bpa=12.76 degrees
! Estimated noise=269.859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195632 Jy
! Component: 100  -  total flux cleaned = 0.0361243 Jy
! Component: 150  -  total flux cleaned = 0.050427 Jy
! Component: 200  -  total flux cleaned = 0.0629375 Jy
! Total flux subtracted in 200 components = 0.0629375 Jy
! Clean residual min=-0.008540 max=0.008111 Jy/beam
! Clean residual mean=-0.000303 rms=0.002483 Jy/beam
! Combined flux in latest and established models = 3.52714 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110413 Jy
! Component: 100  -  total flux cleaned = 0.0208452 Jy
! Component: 150  -  total flux cleaned = 0.0295915 Jy
! Component: 200  -  total flux cleaned = 0.0374206 Jy
! Total flux subtracted in 200 components = 0.0374206 Jy
! Clean residual min=-0.006384 max=0.006500 Jy/beam
! Clean residual mean=-0.000229 rms=0.001923 Jy/beam
! Combined flux in latest and established models = 3.56456 Jy
! Adding 252 model components to the UV plane model.
! The established model now contains 540 components and 3.56456 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.455 mas, bmaj=12.95 mas, bpa=7.104 degrees
! Estimated noise=246.195 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00453874 Jy
! Component: 100  -  total flux cleaned = 0.00869595 Jy
! Component: 150  -  total flux cleaned = 0.012747 Jy
! Component: 200  -  total flux cleaned = 0.0165324 Jy
! Total flux subtracted in 200 components = 0.0165324 Jy
! Clean residual min=-0.005098 max=0.005162 Jy/beam
! Clean residual mean=-0.000125 rms=0.001257 Jy/beam
! Combined flux in latest and established models = 3.58109 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 588 components and 3.58109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077418Jy  sigma=0.000644
! Fit after  self-cal, rms=0.077018Jy  sigma=0.000640
wmodel J0433+0521_L_2010_05_21_pus_map.mod
! Writing 588 model components to file: J0433+0521_L_2010_05_21_pus_map.mod
wobs J0433+0521_L_2010_05_21_pus_uvs.fits
! Writing UV FITS file: J0433+0521_L_2010_05_21_pus_uvs.fits
wwins J0433+0521_L_2010_05_21_pus_map.win
! wwins: Wrote 13 windows to J0433+0521_L_2010_05_21_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139733 Jy
! Component: 100  -  total flux cleaned = 0.0027849 Jy
! Component: 150  -  total flux cleaned = 0.00409558 Jy
! Component: 200  -  total flux cleaned = 0.00495292 Jy
! Component: 250  -  total flux cleaned = 0.00592282 Jy
! Component: 300  -  total flux cleaned = 0.00678321 Jy
! Component: 350  -  total flux cleaned = 0.00740916 Jy
! Component: 400  -  total flux cleaned = 0.00781642 Jy
! Component: 450  -  total flux cleaned = 0.00821314 Jy
! Component: 500  -  total flux cleaned = 0.00847226 Jy
! Component: 550  -  total flux cleaned = 0.00891502 Jy
! Component: 600  -  total flux cleaned = 0.00922441 Jy
! Component: 650  -  total flux cleaned = 0.00952831 Jy
! Component: 700  -  total flux cleaned = 0.0097671 Jy
! Component: 750  -  total flux cleaned = 0.0100616 Jy
! Component: 800  -  total flux cleaned = 0.0103503 Jy
! Component: 850  -  total flux cleaned = 0.0105207 Jy
! Component: 900  -  total flux cleaned = 0.0105769 Jy
! Component: 950  -  total flux cleaned = 0.0107994 Jy
! Component: 1000  -  total flux cleaned = 0.0110191 Jy
! Component: 1050  -  total flux cleaned = 0.0111817 Jy
! Component: 1100  -  total flux cleaned = 0.0111286 Jy
! Component: 1150  -  total flux cleaned = 0.0112344 Jy
! Component: 1200  -  total flux cleaned = 0.011496 Jy
! Component: 1250  -  total flux cleaned = 0.0114431 Jy
! Component: 1300  -  total flux cleaned = 0.011442 Jy
! Component: 1350  -  total flux cleaned = 0.0113405 Jy
! Component: 1400  -  total flux cleaned = 0.0112911 Jy
! Component: 1450  -  total flux cleaned = 0.0114914 Jy
! Component: 1500  -  total flux cleaned = 0.0115409 Jy
! Component: 1550  -  total flux cleaned = 0.0114921 Jy
! Component: 1600  -  total flux cleaned = 0.0115408 Jy
! Component: 1650  -  total flux cleaned = 0.0114447 Jy
! Component: 1700  -  total flux cleaned = 0.0114445 Jy
! Component: 1750  -  total flux cleaned = 0.0115394 Jy
! Component: 1800  -  total flux cleaned = 0.0115389 Jy
! Component: 1850  -  total flux cleaned = 0.011678 Jy
! Component: 1900  -  total flux cleaned = 0.0116312 Jy
! Component: 1950  -  total flux cleaned = 0.0115402 Jy
! Component: 2000  -  total flux cleaned = 0.0114946 Jy
! Component: 2050  -  total flux cleaned = 0.0115847 Jy
! Component: 2100  -  total flux cleaned = 0.0115853 Jy
! Component: 2150  -  total flux cleaned = 0.0115853 Jy
! Component: 2200  -  total flux cleaned = 0.0115855 Jy
! Component: 2250  -  total flux cleaned = 0.0114106 Jy
! Component: 2300  -  total flux cleaned = 0.0115408 Jy
! Component: 2350  -  total flux cleaned = 0.0114544 Jy
! Component: 2400  -  total flux cleaned = 0.011711 Jy
! Component: 2450  -  total flux cleaned = 0.0114129 Jy
! Component: 2500  -  total flux cleaned = 0.0114554 Jy
! Component: 2550  -  total flux cleaned = 0.0114971 Jy
! Component: 2600  -  total flux cleaned = 0.0115799 Jy
! Component: 2650  -  total flux cleaned = 0.0116212 Jy
! Component: 2700  -  total flux cleaned = 0.0114975 Jy
! Component: 2750  -  total flux cleaned = 0.0114976 Jy
! Component: 2800  -  total flux cleaned = 0.0114571 Jy
! Component: 2850  -  total flux cleaned = 0.0116988 Jy
! Component: 2900  -  total flux cleaned = 0.0116586 Jy
! Component: 2950  -  total flux cleaned = 0.0116585 Jy
! Component: 3000  -  total flux cleaned = 0.0116586 Jy
! Component: 3050  -  total flux cleaned = 0.0117766 Jy
! Component: 3100  -  total flux cleaned = 0.0116594 Jy
! Component: 3150  -  total flux cleaned = 0.0116597 Jy
! Component: 3200  -  total flux cleaned = 0.0116599 Jy
! Component: 3250  -  total flux cleaned = 0.0116214 Jy
! Component: 3300  -  total flux cleaned = 0.0116976 Jy
! Component: 3350  -  total flux cleaned = 0.0116598 Jy
! Component: 3400  -  total flux cleaned = 0.0116596 Jy
! Component: 3450  -  total flux cleaned = 0.0116217 Jy
! Component: 3500  -  total flux cleaned = 0.0115471 Jy
! Component: 3550  -  total flux cleaned = 0.0115474 Jy
! Component: 3600  -  total flux cleaned = 0.0114369 Jy
! Component: 3650  -  total flux cleaned = 0.0114734 Jy
! Component: 3700  -  total flux cleaned = 0.0114001 Jy
! Component: 3750  -  total flux cleaned = 0.0114006 Jy
! Component: 3800  -  total flux cleaned = 0.0113643 Jy
! Component: 3850  -  total flux cleaned = 0.0113648 Jy
! Component: 3900  -  total flux cleaned = 0.0114003 Jy
! Component: 3950  -  total flux cleaned = 0.0111875 Jy
! Component: 4000  -  total flux cleaned = 0.0112936 Jy
! Component: 4050  -  total flux cleaned = 0.0111883 Jy
! Total flux subtracted in 4096 components = 0.0111186 Jy
! Clean residual min=-0.002151 max=0.002029 Jy/beam
! Clean residual mean=-0.000077 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 3.59221 Jy
keep
! Adding 345 model components to the UV plane model.
! The established model now contains 927 components and 3.59221 Jy
![Exited script file: muppet]
wmap "J0433+0521_L_2010_05_21_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.455 x 12.95 at 7.104 degrees (North through East)
! Clean map  min=-0.003663  max=1.5538 Jy/beam
! Writing clean map to FITS file: J0433+0521_L_2010_05_21_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.55378 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000739949 
device "J0433+0521_L_2010_05_21_pus\_map.eps/VPS"
! Attempting to open device: 'J0433+0521_L_2010_05_21_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.142867 0.142867 0.285734 0.571468 1.14294 2.28587 4.57175 9.1435 18.287 36.574 73.148
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.553 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.455 x 12.95 at 7.104 degrees (North through East)
! Clean map  min=-0.003663  max=1.5538 Jy/beam
quit
! Quitting program
! Log file J0433+0521_L_2010_05_21_pus_uvs.log closed on Wed Jan  6 22:14:14 2016